HD01 + Smart Reader dunkel aber S02 intern hell??

[muedejoe]

Hallo,

share ohne Probleme eine S02. Nun wollte ich eine HD01 über einen USB SmartReader (Argolis Vers.1.5) anschließen.

Nun kommt folgende Fehlermeldung:

Error activating card.

oscam.user

Spoiler

[account]
user = user
pwd = password
group = 1,2
au = 1
caid = 1702,1833, 1830
betatunnel = 1833.FFFF:1702

oscam.server

Spoiler

[reader]
label = s02
protocol = internal
device = /dev/sci0
caid = 1702
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 357
group = 1
emmcache = 1,3,2


[reader]
Label = HDplus
Protocol = smargo
Device = /dev/ttyUSB0
services = hdp
Mhz = 368
cardmhz = 368
Detect = CD
group = 2
#IDENT = 1830:003411,000000,008011
CAID = 1830
EMMCache = 1,3,2
rsakey = BF...D5
boxkey = A7...C

oscam.conf

Spoiler

Nice = -1
LogFile = /tmp/oscam.log
ClientTimeout = 5
LogFile = stdout
Level = 15
CacheDelay = 120
WaitForCards = 1
PreferLocalCards = 1
FallbackTimeout = 2
Sleep = 0

[dvbapi]
enabled = 0
user = user

[cccam]
port = 10002
reshare = 3
version = 2.1.4


[webif]
httpport = 10003
httphelplang = de
httpuser = admin
httppwd = xxx
httprefresh = 10
httpallowed = 1.0.0.0-255.255.255.255
httpdyndns = ....dyndns.org
httphideidleclients = 1

Die HD01 Karte wurde nicht in dieser Dream 800HD aktiviert sondern in einem anderen HD Receiver.
Alles was rot markiert ist, habe ich hinzu gefügt.

Liegt des Problem an der Karte oder an der Einstellung?

Hoffe Ihr könnt mir weiter helfen.

Vielen Dank
Gruß
Joe

 

[Kermit]

AW: HD01 + Smart Reader dunkel aber S02 intern hell??

Hi,

da stellt sich mir die Frage wie der Smargo eingestellt ist -> Infos Smargo Einstellungen für die Fritzbox

Grüße

Kermit

Edit:
Nicht nur diese eine Zeile im Logfile ist wichtig, wenn eine Karte nicht erkannt wird!

 

[BlueHeart]

AW: HD01 + Smart Reader dunkel aber S02 intern hell??

Hallo,

mit dem fast kleinstmöglichen Log kann man nichts anfangen. :JC_hmmm:

Spoiler

Error activating card.

MFG

 

[muedejoe]

AW: HD01 + Smart Reader dunkel aber S02 intern hell??

Hallo,

dachte wirklich es liegt nur an der Karte :emoticon-0111-blush

Wenn ich Oscam neu starte und der Reader am Receiver angeschlossen ist kommt:

Spoiler

2012/07/02 23:47:18 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #5882 (mipsel-oe-linux)
2012/07/02 23:47:18 0 s version=1.20-unstable_svn, build #5882, system=mipsel-oe-linux, nice=-1
2012/07/02 23:47:18 0 s client max. idle=120 sec, debug level=0
2012/07/02 23:47:18 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2012/07/02 23:47:18 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2012/07/02 23:47:18 0 s Cannot open file "/etc/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2012/07/02 23:47:18 0 s userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled
2012/07/02 23:47:18 0 s signal handling initialized (type=sysv)
2012/07/02 23:47:18 0 s can't open file "/etc/tuxbox/config/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2012/07/02 23:47:18 0 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/07/02 23:47:18 0 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/07/02 23:47:18 0 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2012/07/02 23:47:18 0 s monitor: disabled
2012/07/02 23:47:18 0 s camd35: disabled
2012/07/02 23:47:18 0 s cs378x: disabled
2012/07/02 23:47:18 0 s newcamd: disabled
2012/07/02 23:47:18 0 s cccam: initialized (fd=5, port=10002, crypted)
2012/07/02 23:47:18 0 s radegast: disabled
2012/07/02 23:47:18 0 s http thread started
2012/07/02 23:47:18 0 s reader check thread started
2012/07/02 23:47:18 0 s check thread started
2012/07/02 23:47:18 0 s creating thread for device /dev/sci0
2012/07/02 23:47:18 0 s creating thread for device /dev/ttyUSB0
2012/07/02 23:47:18 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/07/02 23:47:18 0 s waiting for local card init
2012/07/02 23:47:18 553FD8 h HTTP Server listening on port 10003
2012/07/02 23:47:18 550FE8 r reader s02 initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=357)
2012/07/02 23:47:18 5527E0 r smargo init
2012/07/02 23:47:18 5527E0 r ERROR opening device /dev/ttyUSB0
2012/07/02 23:47:18 5527E0 r Cannot open device: /dev/ttyUSB0
.
.
.
2012/07/02 23:47:30 550FE8 r chid: 05FB, date: 2012/04/17 - 2012/08/24
2012/07/02 23:47:30 550FE8 r chid: 0276, date: 2009/12/23 - 2010/09/03
2012/07/02 23:47:30 550FE8 r chid: 05E7, date: 2009/12/23 - 2010/09/03
2012/07/02 23:47:30 550FE8 r chid: 05DD, date: 2009/12/23 - 2010/09/03
2012/07/02 23:47:30 550FE8 r chid: 04CE, date: 2009/12/23 - 2010/09/03
2012/07/02 23:47:30 550FE8 r chid: 0515, date: 2008/01/19 - 2008/01/21
2012/07/02 23:47:31 550FE8 r [irdeto-reader] ready for requests
2012/07/02 23:48:18 5527E0 r smargo init
2012/07/02 23:48:18 5527E0 r ERROR opening device /dev/ttyUSB0
2012/07/02 23:48:18 5527E0 r Cannot open device: /dev/ttyUSB0
2012/07/02 23:49:18 5527E0 r smargo init
2012/07/02 23:49:18 5527E0 r ERROR opening device /dev/ttyUSB0
2012/07/02 23:49:18 5527E0 r Cannot open device: /dev/ttyUSB0

Status : UNKNOWN (no entitlements)
Die S02 bleibt auch dunkel


Gruß

- - - Aktualisiert - - -

Stecke ich den reader ab und wieder an kommt:

Spoiler

2012/07/02 23:47:30 550FE8 r chid: 04CE, date: 2009/12/23 - 2010/09/03
2012/07/02 23:47:30 550FE8 r chid: 0515, date: 2008/01/19 - 2008/01/21
2012/07/02 23:47:31 550FE8 r [irdeto-reader] ready for requests
2012/07/02 23:48:18 5527E0 r smargo init
2012/07/02 23:48:18 5527E0 r ERROR opening device /dev/ttyUSB0
2012/07/02 23:48:18 5527E0 r Cannot open device: /dev/ttyUSB0
2012/07/02 23:49:18 5527E0 r smargo init
2012/07/02 23:49:18 5527E0 r ERROR opening device /dev/ttyUSB0
2012/07/02 23:49:18 5527E0 r Cannot open device: /dev/ttyUSB0
2012/07/02 23:50:18 5527E0 r smargo init
2012/07/02 23:50:18 5527E0 r ERROR opening device /dev/ttyUSB0
2012/07/02 23:50:18 5527E0 r Cannot open device: /dev/ttyUSB0
2012/07/02 23:51:18 5527E0 r smargo init
2012/07/02 23:51:18 5527E0 r reader hdplus initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2012/07/02 23:51:19 0 hdplus card detected
2012/07/02 23:51:26 5527E0 r Error activating card.
2012/07/02 23:51:35 5527E0 r Error activating card.
2012/07/02 23:51:43 5527E0 r Error activating card.

 

[Kermit]

AW: HD01 + Smart Reader dunkel aber S02 intern hell??

Hi,

ändere mal das Protokoll ab in mouse in der oscam.server und prüfe die Einstellungen des Smargo.
Die Einstellungen des Smargo müssen mit Admin Rechten durchgeführt werden. Ansonsten meldet Win zwar alles erledigt, hat es aber leider nicht.

Grüße

Kermit

 

[muedejoe]

AW: HD01 + Smart Reader dunkel aber S02 intern hell??

Hallo,

Smargo Einstellung war auf auto nun:

Mode: Fixed
Frequ: 3.69
Kernel: Dreambox
T-Mode: 0
EGT: 0

Protokoll nun: mouse

Status UNKNOWN

Log

Spoiler

2012/07/03 21:39:13 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #5882 (mipsel-oe-linux)
2012/07/03 21:39:13 0 s version=1.20-unstable_svn, build #5882, system=mipsel-oe-linux, nice=-1
2012/07/03 21:39:13 0 s client max. idle=120 sec, debug level=0
2012/07/03 21:39:13 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2012/07/03 21:39:13 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2012/07/03 21:39:13 0 s Cannot open file "/etc/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2012/07/03 21:39:13 0 s userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled
2012/07/03 21:39:13 0 s signal handling initialized (type=sysv)
2012/07/03 21:39:13 0 s can't open file "/etc/tuxbox/config/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2012/07/03 21:39:13 0 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/07/03 21:39:13 0 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/07/03 21:39:13 0 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2012/07/03 21:39:13 0 s monitor: disabled
2012/07/03 21:39:13 0 s camd35: disabled
2012/07/03 21:39:13 0 s cs378x: disabled
2012/07/03 21:39:13 0 s newcamd: disabled
2012/07/03 21:39:13 0 s cccam: initialized (fd=5, port=10002, crypted)
2012/07/03 21:39:13 0 s radegast: disabled
2012/07/03 21:39:13 0 s http thread started
2012/07/03 21:39:13 0 s reader check thread started
2012/07/03 21:39:13 0 s check thread started
2012/07/03 21:39:13 0 s creating thread for device /dev/sci0
2012/07/03 21:39:13 0 s creating thread for device /dev/ttyUSB0
2012/07/03 21:39:13 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/07/03 21:39:13 0 s waiting for local card init
2012/07/03 21:39:13 553FD8 h HTTP Server listening on port 10003
2012/07/03 21:39:13 550FE8 r reader s02 initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=357)
2012/07/03 21:39:13 5527E0 r ERROR opening device /dev/ttyUSB0
2012/07/03 21:39:13 5527E0 r Cannot open device: /dev/ttyUSB0
2012/07/03 21:39:14 0 s02 card detected
2012/07/03 21:39:25 550FE8 r chid: 05E7, date: 2009/12/23 - 2010/09/03
2012/07/03 21:39:25 550FE8 r chid: 05DD, date: 2009/12/23 - 2010/09/03
....
2012/07/03 21:39:25 550FE8 r chid: 04CE, date: 2009/12/23 - 2010/09/03
2012/07/03 21:39:25 550FE8 r chid: 0515, date: 2008/01/19 - 2008/01/21
2012/07/03 21:39:26 550FE8 r [irdeto-reader] ready for requests
2012/07/03 21:40:13 5527E0 r ERROR opening device /dev/ttyUSB0
2012/07/03 21:40:13 5527E0 r Cannot open device: /dev/ttyUSB0

Ohne HD+ Karte:

Spoiler

2012/07/03 21:55:11 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2012/07/03 21:55:11 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2012/07/03 21:55:11 0 s Cannot open file "/etc/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2012/07/03 21:55:11 0 s userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled
2012/07/03 21:55:11 0 s signal handling initialized (type=sysv)
2012/07/03 21:55:11 0 s can't open file "/etc/tuxbox/config/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2012/07/03 21:55:11 0 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/07/03 21:55:11 0 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/07/03 21:55:11 0 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2012/07/03 21:55:11 0 s monitor: disabled
2012/07/03 21:55:11 0 s camd35: disabled
2012/07/03 21:55:11 0 s cs378x: disabled
2012/07/03 21:55:11 0 s newcamd: disabled
2012/07/03 21:55:11 0 s cccam: initialized (fd=5, port=10002, crypted)
2012/07/03 21:55:11 0 s radegast: disabled
2012/07/03 21:55:11 0 s http thread started
2012/07/03 21:55:11 0 s reader check thread started
2012/07/03 21:55:11 0 s check thread started
2012/07/03 21:55:11 0 s creating thread for device /dev/sci0
2012/07/03 21:55:11 0 s creating thread for device /dev/ttyUSB0
2012/07/03 21:55:11 553F48 h HTTP Server listening on port 10003
2012/07/03 21:55:11 550FE8 r reader s02 initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=357)
2012/07/03 21:55:11 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/07/03 21:55:11 0 s waiting for local card init
2012/07/03 21:55:12 0 s02 card detected
2012/07/03 21:55:13 5527E0 r reader hdplus initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2012/07/03 21:55:15 550FE8 r ATR: ...
2012/07/03 21:55:16 550FE8 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2012/07/03 21:55:17 550FE8 r detect irdeto tunneled nagra card
2012/07/03 21:55:17 550FE8 r no rsa key configured -> using irdeto mode
2012/07/03 21:55:17 550FE8 r detect irdeto card
2012/07/03 21:55:17 550FE8 r caid: 1702, acs: 3.84, country code: GER
2012/07/03 21:55:17 550FE8 r providers: 4, ascii serial: ..., hex serial: ..., hex base: 1A
2012/07/03 21:55:20 550FE8 r WARNING: For Irdeto cards you will have to set 'cardmhz = 600' in oscam.server
2012/07/03 21:55:20 550FE8 r active providers: 2 (000000,000000)
2012/07/03 21:55:20 550FE8 r found cardsystem irdeto
2012/07/03 21:55:20 550FE8 r entitlements for provider: 2, id: 000000
2012/07/03 21:55:20 550FE8 r chid: 0107, date: 2008/01/19 - 2008/01/21
2012/07/03 21:55:20 550FE8 r chid: 0108, date: 2008/01/19 - 2008/01/21
2012/07/03 21:55:20 550FE8 r chid: 7D2B, date: 2008/01/19 - 2008/01/21
2012/07/03 21:55:20 550FE8 r chid: 7D24, date: 2008/01/19 - 2008/01/21
2012/07/03 21:55:20 550FE8 r chid: 7D23, date: 2008/01/19 - 2008/09/29
2012/07/03 21:55:20 550FE8 r chid: 61BD, date: 2008/01/19 - 2008/01/21
2012/07/03 21:55:20 550FE8 r chid: 04BA, date: 2008/01/19 - 2008/09/29
2012/07/03 21:55:20 550FE8 r chid: 04C4, date: 2008/01/19 - 2008/09/29
2012/07/03 21:55:20 550FE8 r chid: 7D2C, date: 2008/01/19 - 2008/01/21
2012/07/03 21:55:20 550FE8 r chid: 7D2D, date: 2008/01/19 - 2008/01/21

Komme leider nicht weiter ...

Gruß
Joe

 

[BlueHeart]

AW: HD01 + Smart Reader dunkel aber S02 intern hell??

Hallo,

2012/07/03 21:39:13 5527E0 r ERROR opening device /dev/ttyUSB0
2012/07/03 21:39:13 5527E0 r Cannot open device: /dev/ttyUSB0

Smargo schon mal benutzt oder ist es das erste Mal?


Edit: ATR, was nicht nötig ist, machst Du unkenntlich, aber die CardSerial lässt Du drin.


MFG

 

[muedejoe]

AW: HD01 + Smart Reader dunkel aber S02 intern hell??

Hallo,

Oscam: 1.20 Build 5882
Smargo ist eine Jungfrau ;-) hab SmartreaderUpdate_v1.5 verwendet.

wenn ich ohne Karte starte und diese dann rein stecke wenn alles läuft:

Spoiler

2012/07/03 22:00:02 0 hdplus card detected
...
2012/07/03 22:00:12 5527E0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2012/07/03 22:00:14 5527E0 r detect native nagra card
...
2012/07/03 22:00:22 5527E0 r card system not supported
2012/07/03 22:00:22 5527E0 r Normal mode failed, reverting to Deprecated Mode
....
2012/07/03 22:00:30 5527E0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
...
2012/07/03 22:00:33 5527E0 r detect native nagra card

2012/07/03 22:00:30 5527E0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz

2012/07/03 22:00:33 5527E0 r detect native nagra card

2012/07/03 22:00:41 5527E0 r card system not supported
2012/07/03 22:00:41 5527E0 r card initializing error

 

[BlueHeart]

AW: HD01 + Smart Reader dunkel aber S02 intern hell??

Hallo,

untern welchem Betriebssystem hast Du den Smargo eingestellt?


MFG

 

[muedejoe]

AW: HD01 + Smart Reader dunkel aber S02 intern hell??

Win7 "Ultimate" 32 bit als Admin

mfg

 

[BlueHeart]

Hallo,
da OScam ohne HD+ Karte keine Probleme hat den USB anzusprechen, stimmt vielleicht die Einstellung des Smargos
immer noch nicht. Ich in deiner Situation würde:
Smargo verschiedene Einstellungen testen....testen...
HD+ mal intern laufen lassen......
S02 mal im Smargo probieren....
Ist nervig, aber was solls.....

Ach noch etwas, beim Reader für HD+ gibst Du einen Service an (hdp), aber im Log steht das die oscam.services nicht vorhanden sind.

MFG


Sent from my iPhone using Tapatalk

 

[muedejoe]

AW: HD01 + Smart Reader dunkel aber S02 intern hell??

mir ist jetzt nicht ganz klar was ich alle in den OSCAM dateien ändern muss wenn ich die S02 extern am Smargo testen möchte und die HD01 intern.

oder reicht es nur den device des readers zu ändern/tauschen ?

 

[STAN001]

AW: HD01 + Smart Reader dunkel aber S02 intern hell??

jepp - die Devices ändern reicht...