HD01 bleibt dunkel (Smartmouse 2 Premium / OSCAM) - Brauche Unterstützung

[lokiy]

Hallo zusammen,

habe auf einem Raspberry-Pi 2 TvHeadend laufen und nun OSCAM installiert. Zudem eine easymouse 2 premium per USB direkt am Pi2 angeschlossen und eine HD01 Karte drin. Der Reader ist eingestellt auf unten - unten - unten - egal. Es sieht meiner Meinung nach alles gut aus. Die Karte hat sich auch automatisch aktiviert oder freigeschaltet. Wenn ich allerdings einen verschlüsselten Sender aufrufe bleibt das Bild schwarz. Das Log sagt folgendes (ab 22:02:25 beginnt der Aufruf des verschlüsselten Senders, davor sieht man das Hochfahren von OSCAM und dem Reader):

OSCAM-Log:

Spoiler

2016/01/27 21:58:05 00000000 s (main) System name = Linux
2016/01/27 21:58:05 00000000 s (main) Host name = raspberry
2016/01/27 21:58:05 00000000 s (main) Release = 4.1.15-v7+
2016/01/27 21:58:05 00000000 s (main) Version = #831 SMP Tue Jan 19 18:39:46 GMT 2016
2016/01/27 21:58:05 00000000 s (main) Machine = armv7l
2016/01/27 21:58:05 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2452
2016/01/27 21:58:05 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/01/27 21:58:05 00000000 s (main) signal handling initialized
2016/01/27 21:58:05 00000000 s (led) LED support is not active. Can't detect machine type.
2016/01/27 21:58:05 00000000 s (net) newcamd: initialized (fd=5, port=15050)
2016/01/27 21:58:05 00000000 s (net) -> CAID: 1830 PROVID: 000000, 003411, 008011
2016/01/27 21:58:05 00000000 s (reader) hd01 [mouse] creating thread for device /dev/ttyUSB0
2016/01/27 21:58:05 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/01/27 21:58:05 00000000 s (main) waiting for local card init
2016/01/27 21:58:05 660080CA h (webif) webif: decompressed 159697 bytes back into 384040 bytes
2016/01/27 21:58:05 660080CA h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75445
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 1 value 5e time_us 674
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 2 value 40 time_us 23
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 3 value 03 time_us 2773
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 4 value 00 time_us 14260
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 5 value 56 time_us 18446
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 6 value ff time_us 14197
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 7 value 00 time_us 15702
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 8 value 76 time_us 14186
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 9 value 7e time_us 15698
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 10 value 71 time_us 14321
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 11 value 80 time_us 22717
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 12 value 1d time_us 18559
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 13 value ff time_us 19953
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 14 value dd time_us 18584
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 15 value 8d time_us 19906
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 16 value 7d time_us 19944
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 17 value 35 time_us 18435
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 18 value f5 time_us 19937
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 19 value 73 time_us 19942
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 20 value d3 time_us 18577
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 21 value b3 time_us 19814
2016/01/27 21:58:05 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 22 value fb time_us 19578
2016/01/27 21:58:06 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 23 value b5 time_us 19569
2016/01/27 21:58:06 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 24 value 59 time_us 19581
2016/01/27 21:58:06 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 25 value 91 time_us 19578
2016/01/27 21:58:06 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 26 value 1d time_us 19811
2016/01/27 21:58:06 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 27 value 3d time_us 18449
2016/01/27 21:58:06 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 28 value d3 time_us 20128
2016/01/27 21:58:06 730FB563 r (reader) hd01 [mouse] Flush readed byte Nr 29 value 39 time_us 19798
2016/01/27 21:58:06 730FB563 r (reader) hd01 [mouse] Buffers readed 29 bytes total time_us 560094
2016/01/27 21:58:06 730FB563 r (reader) hd01 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2016/01/27 21:58:06 730FB563 r (reader) hd01 [mouse] card detected
2016/01/27 21:58:06 730FB563 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75423
2016/01/27 21:58:08 730FB563 r (reader) hd01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
2016/01/27 21:58:08 730FB563 r (reader) hd01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/01/27 21:58:08 730FB563 r (reader) hd01 [mouse] Setting baudrate to 115200 bps
2016/01/27 21:58:08 730FB563 r (reader) hd01 [mouse] Calculated work ETU is 8.70 us reader mhz = 368
2016/01/27 21:58:08 730FB563 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75422
2016/01/27 21:58:08 730FB563 r (reader) hd01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2016/01/27 21:58:08 730FB563 r (reader) hd01 [mouse] Card responded ok for ifsd request of 251
2016/01/27 21:58:09 730FB563 r (reader) hd01 [mouse] detect native nagra card
2016/01/27 21:58:09 730FB563 r (reader) hd01 [mouse] ready for requests
2016/01/27 21:58:09 730FB563 r (reader) hd01 [mouse] found card system nagra
2016/01/27 21:58:09 730FB563 r (reader) hd01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/01/27 21:58:09 730FB563 r (reader) hd01 [nagra] ROM: D N A S P 1 4 2
2016/01/27 21:58:09 730FB563 r (reader) hd01 [nagra] REV: R e v G C 4
2016/01/27 21:58:09 730FB563 r (reader) hd01 [nagra] SER: ############
2016/01/27 21:58:09 730FB563 r (reader) hd01 [nagra] CAID: 1830
2016/01/27 21:58:09 730FB563 r (reader) hd01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2016/01/27 21:58:09 730FB563 r (reader) hd01 [nagra] Prv.ID: 00 00 00 00
2016/01/27 21:58:10 730FB563 r (reader) hd01 [nagra] IRD ID: ############
2016/01/27 21:58:10 730FB563 r (reader) hd01 [nagra] active to: 2016/03/19 11:59
2016/01/27 21:58:10 730FB563 r (reader) hd01 [nagra] -----------------------------------------
2016/01/27 21:58:10 730FB563 r (reader) hd01 [nagra] |id |tier |valid from |valid to |
2016/01/27 21:58:10 730FB563 r (reader) hd01 [nagra] +----+--------+------------+------------+
2016/01/27 21:58:10 730FB563 r (reader) hd01 [nagra] |8011|0064 |2016/01/26 |2017/01/26 |
2016/01/27 21:58:10 730FB563 r (reader) hd01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2016/01/27 21:58:10 730FB563 r (reader) hd01 [nagra] -----------------------------------------
2016/01/27 21:58:10 00000000 s (main) init for all local cards done
2016/01/27 21:58:10 00000000 s (anticasc) anti cascading disabled
2016/01/27 21:58:56 36536D6A c (newcamd) client connected to 15050 port
2016/01/27 21:58:56 36536D6A c (client) encrypted newcamd:15050-client 127.0.0.1 granted (oscam, au=on (1 reader))
2016/01/27 21:58:56 36536D6A c (newcamd) user oscam authenticated successfully (Tvheadend)
2016/01/27 21:58:56 36536D6A c (newcamd) AU enabled for user oscam on reader hd01
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] T1 Resync command succesfull ifsc = 251
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] ERROR: not ready to write, timeout=1 ms
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1208 us
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] T1 Resync command succesfull ifsc = 251
2016/01/27 22:02:25 36536D6A c (ecm) oscam (1830@000000/0000/EF75/92:AA3082AA2936DC3BB016C93EF789743F): timeout (10 ms) by hd01
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] ERROR: not ready to write, timeout=1 ms
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1208 us
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] T1 Resync command succesfull ifsc = 251
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] ERROR: not ready to write, timeout=1 ms
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1208 us
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] ERROR: not ready to write, timeout=1 ms
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1208 us
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] T1 Resync command succesfull ifsc = 251
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] ERROR: not ready to write, timeout=1 ms
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1208 us
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] ERROR: not ready to write, timeout=1 ms
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1208 us
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] T1 Resync command succesfull ifsc = 251
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] ERROR: not ready to write, timeout=1 ms
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1208 us
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] ERROR: not ready to write, timeout=1 ms
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1208 us
2016/01/27 22:02:25 730FB563 r (reader) hd01 [nagra] T1 Resync command succesfull ifsc = 251
2016/01/27 22:02:29 730FB563 r (reader) hd01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/27 22:02:29 36536D6A c (ecm) oscam (1830@000000/0000/EF75/92:C21C9BFF13B2C7222535371C89A7EB9B): timeout (11 ms) by hd01
2016/01/27 22:02:30 730FB563 r (reader) hd01 [nagra] T1 Resync command succesfull ifsc = 251
2016/01/27 22:02:32 730FB563 r (reader) hd01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/27 22:02:32 730FB563 r (reader) hd01 [nagra] T1 Resync command succesfull ifsc = 251
2016/01/27 22:02:36 730FB563 r (reader) hd01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=1: written (453 ms)
2016/01/27 22:02:36 36536D6A c (ecm) oscam (1830@000000/0000/EF75/92:F9BEA48EF597B2E31D35EEB070D777F7): timeout (10 ms) by hd01
2016/01/27 22:02:40 730FB563 r (reader) hd01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=1: written (453 ms)
2016/01/27 22:02:43 36536D6A c (ecm) oscam (1830@000000/0000/EF75/92:54C4C930EFE0E794A334FC91E5E90D56): timeout (11 ms) by hd01
2016/01/27 22:02:46 730FB563 r (reader) hd01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/27 22:02:46 730FB563 r (reader) hd01 [nagra] T1 Resync command succesfull ifsc = 251
2016/01/27 22:02:46 730FB563 r (reader) hd01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=1: written (3055 ms)
2016/01/27 22:02:48 730FB563 r (reader) hd01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=1: written (453 ms)
2016/01/27 22:02:50 36536D6A c (ecm) oscam (1830@000000/0000/EF75/92:5D2C27E1FF1ECF5652DF178AA5F199F0): timeout (10 ms) by hd01
2016/01/27 22:02:52 730FB563 r (reader) hd01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=1: written (453 ms)
2016/01/27 22:02:57 36536D6A c (ecm) oscam (1830@000000/0000/EF75/92:57F97E04A9FF9253F7BD2C7634604084): timeout (11 ms) by hd01
2016/01/27 22:02:59 730FB563 r (reader) hd01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/27 22:03:01 730FB563 r (reader) hd01 [nagra] T1 Resync command error, trying to reactivate!
2016/01/27 22:03:01 730FB563 r (reader) hd01 [nagra] Buffers readed 0 bytes total time_us 75472
2016/01/27 22:03:02 730FB563 r (reader) hd01 [nagra] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
2016/01/27 22:03:02 730FB563 r (reader) hd01 [nagra] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/01/27 22:03:02 730FB563 r (reader) hd01 [nagra] Setting baudrate to 115200 bps
2016/01/27 22:03:02 730FB563 r (reader) hd01 [nagra] Calculated work ETU is 8.70 us reader mhz = 368
2016/01/27 22:03:02 730FB563 r (reader) hd01 [nagra] Buffers readed 0 bytes total time_us 75487
2016/01/27 22:03:02 730FB563 r (reader) hd01 [nagra] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2016/01/27 22:03:02 730FB563 r (reader) hd01 [nagra] Card responded ok for ifsd request of 251
2016/01/27 22:03:04 36536D6A c (ecm) oscam (1830@000000/0000/EF75/92:83749422BD8F7F002491765EC5651762): timeout (10 ms) by hd01
2016/01/27 22:03:05 730FB563 r (reader) hd01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=1: written (454 ms)
2016/01/27 22:03:11 36536D6A c (ecm) oscam (1830@000000/0000/EF75/92:844A54A382C130F251D1D26B0CEA1ACF): timeout (10 ms) by hd01
2016/01/27 22:03:18 36536D6A c (ecm) oscam (1830@000000/0000/EF75/92:24B0C69C882E0E3B46DD22030C2B467D): timeout (11 ms) by hd01
2016/01/27 22:03:20 730FB563 r (reader) hd01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/27 22:03:20 730FB563 r (reader) hd01 [nagra] T1 Resync command succesfull ifsc = 251
2016/01/27 22:03:22 730FB563 r (reader) hd01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=1: written (454 ms)
2016/01/27 22:03:25 730FB563 r (reader) hd01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/27 22:03:25 36536D6A c (ecm) oscam (1830@000000/0000/EF75/92:4BEE146201D7CD876F2FD3DD9AEFC598): timeout (11 ms) by hd01
2016/01/27 22:03:28 730FB563 r (reader) hd01 [nagra] T1 Resync command error, trying to reactivate!
2016/01/27 22:03:28 730FB563 r (reader) hd01 [nagra] Buffers readed 0 bytes total time_us 75472
2016/01/27 22:03:29 730FB563 r (reader) hd01 [nagra] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
2016/01/27 22:03:29 730FB563 r (reader) hd01 [nagra] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/01/27 22:03:29 730FB563 r (reader) hd01 [nagra] Setting baudrate to 115200 bps
2016/01/27 22:03:29 730FB563 r (reader) hd01 [nagra] Calculated work ETU is 8.70 us reader mhz = 368
2016/01/27 22:03:29 730FB563 r (reader) hd01 [nagra] Buffers readed 0 bytes total time_us 75713
2016/01/27 22:03:29 730FB563 r (reader) hd01 [nagra] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2016/01/27 22:03:29 730FB563 r (reader) hd01 [nagra] Card responded ok for ifsd request of 251

Meine oscam.server:

Spoiler

[reader]
label = hd01
enable = 1
protocol = mouse
device = /dev/ttyUSB0
detect = cd
group = 1
rsakey = BF3***********************************************************************DD5
boxkey = A7***********37C
caid = 1830
ident = 1830:000000,003411,008011
mhz = 368
cardmhz = 368
emmcache = 1,1,2
ecmwhitelist = 1830:92

oscam.user:

Spoiler

[account]
user = oscam
pwd = oscam
disabled = 0
caid = 1830
au = hd01
group = 1

oscam.conf:

Spoiler

[global]
logfile = /tmp/oscam.log
nice = 1
maxlogsize = 2048
clienttimeout = 10
clientmaxidle = 160
waitforcards = 1
cachedelay = 60

[webif]
httpport = 9999
httpuser = admin
httppwd = admin
httphelplang = de
httpallowed = 127.0.0.1,10.10.10.10-192.168.255.254

[newcamd]
key = 0102030524789445654322341314
port = 15050@1830:000000,003411,008011
keepalive = 1

Für Hilfe wäre ich äußerst dankbar!

 

[soblabla]

AW: HD01 bleibt dunkel (Smartmouse 2 Premium / OSCAM) - Brauche Unterstützung

Nimm mal die Config.
Achtung, du musst noch die Ports, ip Adressen, Passwörter usw anpassen.

Für die Raspy:

oscam.conf:

Spoiler

[global]
logfile = /var/etc/oscam_log/OScam.log
disableuserfile = 0
fallbacktimeout = 1500
clientmaxidle = 600
netprio = 1
nice = -20
maxlogsize = 2048
waitforcards_extra_delay = 300
readerrestartseconds = 2
usrfile = /var/etc/oscam_log/user.log
emmlogdir = /var/etc/oscam_log/
failbantime = 30
failbancount = 3

[cache]
max_time = 30

[cccam]
port = 9999
nodeid = 7CC1xxxxxxxx
version = 2.3.0
reshare = 0

[webif]
httpport = 8888
httpuser = sagich
httppwd = nicht
httphelplang = de
httprefresh = 10
httppollrefresh = 10
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 123.456.0.789-987.654.0.321

Oscam.server:

Spoiler

label = HD01
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 1830
boxkey = A76xxxxxx
rsakey = BF358B546186313xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx x
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-s = 1

oscam.user

Spoiler

[account]
user = client1
pwd = passwortclient1
au = HD01
group = 1

Für den Client:

oscam.conf

Spoiler

[global]
logfile = /var/keys/oscam_log/oscam.log
disableuserfile = 0
clienttimeout = 6600
clientmaxidle = 600
netprio = 1
nice = -20
maxlogsize = 2048
waitforcards_extra_delay = 300
readerrestartseconds = 2
usrfile = /var/keys/oscam_log/user.log
emmlogdir = /var/keys/oscam_log/

[dvbapi]
enabled = 1
au = 1
delayer = 60
user = user_local
boxtype = dreambox

[webif]
httpport = 9999
httpuser = sagich
httppwd = nicht
httphelplang = de
httprefresh = 10
httppollrefresh = 10
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowecminfo = 1
httpallowed = 123.456.0.789-987.654.0.321

oscam.dvbapi

Spoiler

P: 1830
I: 0

oscam.server

Spoiler

[reader]
label = HD01
protocol = cccam
device = IP des servers,9999
user = client1
password = passwortclient1
inactivitytimeout = 30
caid = 1830
group = 1
cccversion = 2.3.0
ccckeepalive = 1
cccreconnect = 24000

oscam.user

Spoiler

[account]
user = user_local
au = HD01
group = 1

 

[lokiy]

Danke! Werde es heute abend mal versuchen.

Anbindung an TvHeadend dann auf dvbapi ändern? Der Client ist bei mir ja TvHeadend. Ich habe da die Anbindung da bisher nur über die GUI gemacht. In meinem Fall über newcamd...

 

[Rohrby]

AW: HD01 bleibt dunkel (Smartmouse 2 Premium / OSCAM) - Brauche Unterstützung

Ich bin jetzt nicht der große oscam Profi aber eventuell liegt es am Clienttimeout den du unter oscam.conf eingestellt hast. Du hast da 10ms eingestellt. Lösch das doch mal raus und starte oscam neu.

 

[soblabla]

AW: HD01 bleibt dunkel (Smartmouse 2 Premium / OSCAM) - Brauche Unterstützung

es sind aber auch sehr viele unnötige Einträge in seiner Config

 

[lokiy]

AW: HD01 bleibt dunkel (Smartmouse 2 Premium / OSCAM) - Brauche Unterstützung

Ich bin jetzt nicht der große oscam Profi aber eventuell liegt es am Clienttimeout den du unter oscam.conf eingestellt hast. Du hast da 10ms eingestellt. Lösch das doch mal raus und starte oscam neu.

Also nachdem ich die 10ms aus der oscam.conf entfernt hatte, habe ich nun ein Bild bekommen. Allerdings lief es überhaupt nicht gut. Pausenlos Aussetzer und Ruckler. Immerwieder ecm Meldungen mit "not found" im Log mit Milisekundenangaben >3000. Aber auch wenn die Milisekunden mal über einen längeren Zeitraum bei um die 280 liegen hakt es ständig. Prinzipiell schwanken die Milisekunden aber ziemlich stark, mal gehts in den Bereich um 280 dann aber schnell wieder in den vierstelligen Bereich bis hin zu Not found im Bereich 1500ms-4000ms oder Timeouts 5000ms. Habe dann mal die Config von Soblabla probiert, da bekomme ich aber das gleiche Ergebnis. Ich verstehe garnicht, warum das so extrem schwankt. Jemand noch irgendwelche Tipps?

Auszug aus dem Log:

Spoiler

• 2016/01/28 23:38:30 4C9985DB r (reader) HD01 [nagra] Card responded ok for ifsd request of 251
• 2016/01/28 23:38:31 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:5CC7B6943E648B5B4EB5B41A2942D6B6): not found (3821 ms) by HD01
• 2016/01/28 23:38:31 4C9985DB r (reader) HD01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=3: written (452 ms)
• 2016/01/28 23:38:34 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:7AE2A8F143C08DBC47EBCFC9747E47D9): found (285 ms) by HD01
• 2016/01/28 23:38:40 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:38:42 4C9985DB r (reader) HD01 [nagra] T1 Resync command error, trying to reactivate!
• 2016/01/28 23:38:42 4C9985DB r (reader) HD01 [nagra] Buffers readed 0 bytes total time_us 75154
• 2016/01/28 23:38:44 4C9985DB r (reader) HD01 [nagra] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 35 62
• 2016/01/28 23:38:44 4C9985DB r (reader) HD01 [nagra] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2016/01/28 23:38:44 4C9985DB r (reader) HD01 [nagra] Setting baudrate to 115200 bps
• 2016/01/28 23:38:44 4C9985DB r (reader) HD01 [nagra] Calculated work ETU is 8.70 us reader mhz = 368
• 2016/01/28 23:38:44 4C9985DB r (reader) HD01 [nagra] Buffers readed 0 bytes total time_us 75152
• 2016/01/28 23:38:44 4C9985DB r (reader) HD01 [nagra] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2016/01/28 23:38:44 4C9985DB r (reader) HD01 [nagra] Card responded ok for ifsd request of 251
• 2016/01/28 23:38:44 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:058E3540E05E3F2BF74419F7832D0F5C): not found (2974 ms) by HD01
• 2016/01/28 23:38:48 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] T1 Resync command error, trying to reactivate!
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Buffers readed 0 bytes total time_us 75157
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Setting baudrate to 115200 bps
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Calculated work ETU is 8.70 us reader mhz = 368
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 1 value 00 time_us 15095
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 2 value 00 time_us 35
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 3 value 00 time_us 29
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 4 value 00 time_us 29
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 5 value 00 time_us 1168
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 6 value 00 time_us 17542
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 7 value 00 time_us 1185
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 8 value 00 time_us 31
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 9 value 00 time_us 29
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 10 value 00 time_us 18430
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 11 value 00 time_us 33
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 12 value 00 time_us 35
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 13 value 00 time_us 29
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 14 value 00 time_us 18634
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 15 value 00 time_us 1487
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 16 value 00 time_us 38
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 17 value 00 time_us 17925
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 18 value 00 time_us 36
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 19 value 00 time_us 885
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 20 value 00 time_us 18420
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 21 value 00 time_us 35
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 22 value 00 time_us 32
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 23 value 00 time_us 34
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 24 value 00 time_us 17701
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 25 value 00 time_us 37
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 26 value 00 time_us 982
• 2016/01/28 23:38:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 27 value 00 time_us 34
• 2016/01/28 23:38:51 4C9985DB r (reader) HD01 [nagra] Buffers readed 27 bytes total time_us 208802
• 2016/01/28 23:38:51 4C9985DB r (reader) HD01 [nagra] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2016/01/28 23:38:51 4C9985DB r (reader) HD01 [nagra] Card responded ok for ifsd request of 251
• 2016/01/28 23:38:51 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:F193EC680B5C3AB0D1156274AAA53061): not found (2914 ms) by HD01
• 2016/01/28 23:38:51 4C9985DB r (reader) HD01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=3: written (453 ms)
• 2016/01/28 23:38:57 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:38:57 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:38:58 4C9985DB r (reader) HD01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=3: written (3758 ms)
• 2016/01/28 23:38:58 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:02F4610E42CB3EB7A233A950D246C859): found (3297 ms) by HD01
• 2016/01/28 23:39:04 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:39:04 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:39:04 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:0057D0EFF0934891A554597BC5E84B2D): not found (1977 ms) by HD01
• 2016/01/28 23:39:12 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:39:12 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:39:12 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:C0E53D659855D98E2DEC1FA9CCD8DD66): not found (3573 ms) by HD01
• 2016/01/28 23:39:13 4C9985DB r (reader) HD01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=3: written (453 ms)
• 2016/01/28 23:39:16 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:4175965DC3F41742A2052AEA52974030): found (287 ms) by HD01
• 2016/01/28 23:39:23 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:39:23 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:39:25 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:39:25 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:39:25 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:51FD4AE4B47C12EE97A99584B68E9286): not found (1989 ms) by HD01
• 2016/01/28 23:39:27 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:39:27 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:39:27 4C9985DB r (reader) HD01 [nagra] Negotiate sessionkey was not successful! Please check rsa key and boxkey
• 2016/01/28 23:39:29 4C9985DB r (reader) HD01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=3: written (644 ms)
• 2016/01/28 23:39:32 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:39:32 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:39:33 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:18C6BE5C4EC6DC5B3FDA62B9A658830D): not found (2667 ms) by HD01
• 2016/01/28 23:39:37 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:39:37 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:39:37 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:5B86CCFE768FEA2023ED909D5A4DC330): not found (423 ms) by HD01
• 2016/01/28 23:39:44 4C9985DB r (reader) HD01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=3: written (452 ms)
• 2016/01/28 23:39:44 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:9BA90D5471B30479186EC81FDCC71166): found (441 ms) by HD01
• 2016/01/28 23:39:51 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:39:52 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:39:54 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:39:54 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:39:55 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:3564C34508589FCC6F49F4DE610529E4): not found (3754 ms) by HD01
• 2016/01/28 23:40:00 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:40:00 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:40:00 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:E212C9C1E9E85D79778F6513D9E70021): not found (1978 ms) by HD01
• 2016/01/28 23:40:02 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:40:02 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:40:02 4C9985DB r (reader) HD01 [nagra] Negotiate sessionkey was not successful! Please check rsa key and boxkey
• 2016/01/28 23:40:03 4C9985DB r (reader) HD01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=2: written (646 ms)
• 2016/01/28 23:40:07 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:40:07 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:40:08 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:87D408F42D3C59C411E81D1892CEF6AB): not found (2733 ms) by HD01
• 2016/01/28 23:40:08 4C9985DB r (reader) HD01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=2: written (453 ms)
• 2016/01/28 23:40:12 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:EC06995C5B5B467CE85EF029633FAD8E): found (286 ms) by HD01
• 2016/01/28 23:40:19 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:40:19 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:40:23 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:40:23 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:40:23 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:C30F01EF0F2EEFE09790547B5DBF099F): not found (3853 ms) by HD01
• 2016/01/28 23:40:23 4C9985DB r (reader) HD01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=1: written (452 ms)
• 2016/01/28 23:40:25 4C9985DB r (reader) HD01 [nagra] oscam emmtype=global, len=150 (hex: 0x96), cnt=3: written (452 ms)
• 2016/01/28 23:40:26 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:40:27 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:40:29 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:40:29 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:40:29 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:F416D2A8BCF934BD47F3D5A64FA00B2C): not found (3549 ms) by HD01
• 2016/01/28 23:40:35 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:40:35 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:40:35 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:B85434F37DE415A57C7E21C0E0771071): not found (1978 ms) by HD01
• 2016/01/28 23:40:40 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:40:42 4C9985DB r (reader) HD01 [nagra] T1 Resync command error, trying to reactivate!
• 2016/01/28 23:40:42 4C9985DB r (reader) HD01 [nagra] Buffers readed 0 bytes total time_us 75154
• 2016/01/28 23:40:44 4C9985DB r (reader) HD01 [nagra] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 35 62
• 2016/01/28 23:40:44 4C9985DB r (reader) HD01 [nagra] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2016/01/28 23:40:44 4C9985DB r (reader) HD01 [nagra] Setting baudrate to 115200 bps
• 2016/01/28 23:40:44 4C9985DB r (reader) HD01 [nagra] Calculated work ETU is 8.70 us reader mhz = 368
• 2016/01/28 23:40:44 4C9985DB r (reader) HD01 [nagra] Buffers readed 0 bytes total time_us 75173
• 2016/01/28 23:40:44 4C9985DB r (reader) HD01 [nagra] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2016/01/28 23:40:44 4C9985DB r (reader) HD01 [nagra] Card responded ok for ifsd request of 251
• 2016/01/28 23:40:44 46C016A9 c (ecm) oscam (1830@000000/0000/EF75/92:933ABC00F085D7DE7B42296E4CB4F30C): not found (4224 ms) by HD01
• 2016/01/28 23:40:48 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:40:48 4C9985DB r (reader) HD01 [nagra] T1 Resync command succesfull ifsc = 251
• 2016/01/28 23:40:48 4C9985DB r (reader) HD01 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2016/01/28 23:40:49 4C9985DB r (reader) HD01 [nagra] T1 Resync command error, trying to reactivate!
• 2016/01/28 23:40:49 4C9985DB r (reader) HD01 [nagra] Buffers readed 0 bytes total time_us 75181
• 2016/01/28 23:40:50 4C9985DB r (reader) HD01 [nagra] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 35 62
• 2016/01/28 23:40:50 4C9985DB r (reader) HD01 [nagra] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2016/01/28 23:40:50 4C9985DB r (reader) HD01 [nagra] Setting baudrate to 115200 bps
• 2016/01/28 23:40:50 4C9985DB r (reader) HD01 [nagra] Calculated work ETU is 8.70 us reader mhz = 368
• 2016/01/28 23:40:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 1 value 00 time_us 10499
• 2016/01/28 23:40:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 2 value 00 time_us 78
• 2016/01/28 23:40:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 3 value 00 time_us 14146
• 2016/01/28 23:40:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 4 value 00 time_us 78
• 2016/01/28 23:40:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 5 value 00 time_us 1211
• 2016/01/28 23:40:50 4C9985DB r (reader) HD01 [nagra] Flush readed byte Nr 6 value 00 time_us 18613

 

[crazyhansi]

AW: HD01 bleibt dunkel (Smartmouse 2 Premium / OSCAM) - Brauche Unterstützung

Du kannst meine Settings probieren habe auch eine easymouse am raspberry das funkt perfekt. Speziell die mhz sind bei der hd plus wichtig. Meine mouse ist auf 600 mhz eingestellt.

Spoiler

[reader]
label = hdplus
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 1830
boxkey = A76xxxxxxD37C
rsakey = BF358xxxxxxxxxxxxxxxx09E4D9C5CCA4DD5
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2
ndsversion = 2

 

[C3PO]

AW: HD01 bleibt dunkel (Smartmouse 2 Premium / OSCAM) - Brauche Unterstützung

Auf jeden Fall stimmt mit dem Reader irgendwas nicht.
Der ATR deiner Karte ist nicht OK.

Bei Revision RevGC6 ist das der richtige ATR:
3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61

Früher bei Revision RevGC4 war das der richtige ATR:
3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63

In meinem Reader habe ich nichts für die beiden MHZ -Werte eingetragen.
Ev. hat Easymouse auch eine falsche Einstellung.


mlG

 

[soblabla]

AW: HD01 bleibt dunkel (Smartmouse 2 Premium / OSCAM) - Brauche Unterstützung

Zeigt mal deine aktuellen konfigs, mit meiner Konfig läuft es bei mir absolut perfekt.

Welche Raspberry hast du? Hast du einen USB Hub zwischen Raspi und Reader? Ist eventuell dein Netzteil für die Raspberry zu schwach? Zwei Ampere bei fünf Volt wird empfohlen,

 

[lokiy]

AW: HD01 bleibt dunkel (Smartmouse 2 Premium / OSCAM) - Brauche Unterstützung

Ich hab nen Raspberry Pi2. Reader ist direkt am USB-Anschluss des Pi angeschlossen. An dem hängt noch eine 2,5" Festplatte die ihren Strom über den Pi bekommt. Werde die zur Sicherheit heute abend mal wegnehmen. mein Pi hängt an einem 2,1A 5V-Netzteil, sollte also eigentlich gut reichen. Configs kann ich erst heute abend wieder posten.

 

[4gx35]

AW: HD01 bleibt dunkel (Smartmouse 2 Premium / OSCAM) - Brauche Unterstützung

dann nimm die platte einfach mal ab, resync error beim reader meist wegen überlastung,
ansonsten karte auf jeden fall mit 6mhz testen

 

[soblabla]

AW: HD01 bleibt dunkel (Smartmouse 2 Premium / OSCAM) - Brauche Unterstützung

Naja, mit der Festplatte,
wundert es mich auch nicht mehr...

 

[4gx35]

AW: HD01 bleibt dunkel (Smartmouse 2 Premium / OSCAM) - Brauche Unterstützung

habe keinen pi, aber festplatte sicherlich besser am aktiven hub ?

 

[lokiy]

AW: HD01 bleibt dunkel (Smartmouse 2 Premium / OSCAM) - Brauche Unterstützung

Oh man lag vermutlich echt an der Platte. Habe die jetzt an nen Hub mit externer Stromversorgung gehängt. Seitdem siehts ganz gut aus:

Spoiler

• 2016/01/29 15:17:54 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:5A27972F5B70EF49222C41AD9A28436F): found (285 ms) by HD01
• 2016/01/29 15:18:01 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:927D3767D3A89FE6EE016F3FEEC385D9): found (286 ms) by HD01
• 2016/01/29 15:18:08 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:7D313ED2B7C71B8DDAB03D850FE2EDE9): found (287 ms) by HD01
• 2016/01/29 15:18:15 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:463392F5DC434CAC6E7FCB6DECB768B4): found (285 ms) by HD01
• 2016/01/29 15:18:22 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:5D3FB987DEACC036479FA154F1EDBAF4): found (285 ms) by HD01
• 2016/01/29 15:18:29 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:A5F29DA15EEBE9F7F3A88C29E4EA6A6C): found (305 ms) by HD01
• 2016/01/29 15:18:36 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92DDB96CA565C717E06AC1DEC02DCE930): found (285 ms) by HD01
• 2016/01/29 15:18:43 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:C268041C2E0CDF34904361DD046DAC06): found (285 ms) by HD01
• 2016/01/29 15:18:50 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92026EE9A7A5CB78863094DA4FE1D768F): found (285 ms) by HD01
• 2016/01/29 15:18:57 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:4ADAC054E9459BA941546B589D9799CD): found (285 ms) by HD01
• 2016/01/29 15:19:04 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:5C662B1F4074064DC47AD143699ACA6D): found (285 ms) by HD01
• 2016/01/29 15:19:11 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:68E4DAB58CE9F90983857D6C2C9F216F): found (284 ms) by HD01
• 2016/01/29 15:19:18 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:C855BEBD3B785160175D2EE4E91973F3): found (285 ms) by HD01
• 2016/01/29 15:19:26 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:C51DA8E0DB8FAADEDF50076BCD12CF48): found (285 ms) by HD01
• 2016/01/29 15:19:33 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:972498455CB3EBD7A1B56D57F513D467): found (285 ms) by HD01
• 2016/01/29 15:19:40 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:9089B14140DB8C6B5FD544360AB1ED30): found (285 ms) by HD01
• 2016/01/29 15:19:47 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:EC1BD832A902E2633DE1025E940D5D8D): found (285 ms) by HD01
• 2016/01/29 15:19:54 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:9643D94C7A344337AA04F44C14E2B0A3): found (285 ms) by HD01
• 2016/01/29 15:20:01 18C11B09 c (ecm) oscam (1830@000000/0000/EF75/92:9F8B5FEB95F8C2F974C71148F160B9AD): found (286 ms) by HD01

Oh man sorry ich hatte die Platte beim ganzen Testen die letzten Tage total ausgeblendet und garnet daran gedacht, dass der Pi da überlastet sein könnte mit der Stromversorgung und der Peripherie. Dachte halt bei nem 2.1 A Netzteil wird da schon nix schief gehen. Danke für die Hilfe! Werde jetzt die Tage mal testen.

 

[lokiy]

AW: HD01 bleibt dunkel (Smartmouse 2 Premium / OSCAM) - Brauche Unterstützung

Ich habe nun noch ein weiteres Problem. Nach einem Neustart von OSCAM funktioniert alles korrekt. Wenn ich mich mit einem Client (Kodi über TvHeadend) verbinde, werden die HD Plus Programme ausgestrahlt. Schalte ich den Client aus und versuche kurze Zeit später wieder mit diesem oder einem anderen Client ein HD Plus Programm aufzurufen, bleibt das Bild schwarz. Im Log steht garnichts. Starte ich dann OSCAM neu klappt es. An TvHeadend scheint es auch nicht zu liegen nen Reconnect zu OSCAM bewirkt in diesem Fall auch nichts. Meine Config sieht nun aktuell so aus (größtenteils von soblabla übernommen, danke dafür!):

OSCAM.CONF:

Spoiler

[global]
logfile = /tmp/oscam.log
disableuserfile = 0
fallbacktimeout = 1500
clientmaxidle = 600
netprio = 1
nice = -20
maxlogsize = 2048
waitforcards_extra_delay = 300
readerrestartseconds = 2
usrfile = /tmp/oscam_log/user.log
emmlogdir = /tmp/oscam_log/
failbantime = 30
failbancount = 3

[cache]
max_time = 30

[webif]
httpport = 7777
httpuser = user
httppwd = meinpw
httprefresh = 10
httppollrefresh = 10
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httphelplang = de
httpallowed = 127.0.0.1,10.10.10.10-192.168.255.254

[newcamd]
key = 0106555378965432556421721314
port = 13010@1830:000000,003411,008011
keepalive = 1

OSCAM.SERVER:

Spoiler

[reader]
label = HD01
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 1830
boxkey = A****************C
rsakey = B*****************************************************************5
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-s = 1

OSCAM.USER:

Spoiler

[account]
user = meinuser
pwd = meinpw
au = HD01
group = 1

Ist das irgendein Timeout oder Keep-Alive Problem? Für weitere Hilfe wäre ich sehr dankbar.