HD+ und Sky Karte laufen nur einzeln, nicht zusammen

Daniel775 · 8. Februar 2011

Weiss jemand in dieser Situation weiter?
Irgendwie schaffe ich es nicht beide Karten mit den Readern einzubinden.

Geräte:
AzBox Premium HD
Synology DS207
Aktiver 7 Port USB-Hub
2x Smartreader von MaxDigital

Karten:
Sky S02
HD+ schwarz HD02

Client:
AzBox mit cccam Protokol Version 2.2.1

Server:
DS207 mit oscam version 1.00-unstable_svn, build #4100 und cccam 2.1.2
cccam hat über newcamd Port 34000 und 34001 verbindung zu oscam

Configs:
oscam.conf

[global]
logfile = /opt/var/etc/oscam.log
nice = -1
maxlogsize = 0

[newcamd]
port = 34000@1702:000000;34001@1843:000000
serverip = 127.0.0.1
key = 0102030405060708091011121314
allowed = 0.0.0.0-255.255.255.255
keepalive = 1
mgclient = 0

[webif]
httpport = 83
httpuser = oscam
httppwd = admin
httprefresh = 0
httpallowed = 127.0.0.1,192.168.170.0-192.168.170.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

oscam.server

[reader]
label = sky
enable = 1
protocol = mouse
device = /dev/ttyUSB0
services = sky
caid = 1702,1833
force_irdeto = 1
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
ident = 1702:000000;1833:000000
group = 1
emmcache = 1,3,2
lb_weight = 100

[reader]
label = hdplus
enable = 1
protocol = mouse
device = /dev/ttyUSB1
services = hdplus
smargopatch = 1
caid = 1843
rsakey = BF***
boxkey = A7***
detect = cd
mhz = 357
cardmhz = 357
ident = 1843:000000,003411,008011
group = 2
emmcache = 1,3,2
lb_weight = 100

oscam.user

[account]
user = usersky
pwd = passsky
group = 1
monlevel = 2
au = sky
services = sky
caid = 1702
betatunnel = 1833.007A:1702,1833.007B:1702,1833.007C:1702,1833.007E:1702,1833.007F:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084:1702
ident = 1702:000000

[account]
user = userhd
pwd = passhd
group = 2
monlevel = 2
au = 1
services = hdplus
caid = 1843
ident = 1843:000000,003411,008011
cccmaxhops = 0
keepalive = 0

cccam.cfg

N: 127.0.0.1 34000 usersky passsky 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 34001 userhd passhd 01 02 03 04 05 06 07 08 09 10 11 12 13 14
F: user pass

SERVER LISTEN PORT : 12000
#SERIAL READER : /dev/ttyUSB0 smartreader+
#SMARTCARD CLOCK FREQUENCY : /dev/ttyUSB0 6000000
DEBUG: No
DISABLE EMM : Yes
SOFTKEY FILE : /opt/bin/etc/SoftCam.Key
AUTOROLL FILE : /opt/bin/etc/AutoRoll.Key
CAID PRIO FILE : /opt/bin/etc/CCcam.prio
PROVIDERINFO FILE : /opt/bin/etc/CCcam.providers
CHANNELINFO FILE : /opt/bin/etc/CCcam.channelinfo
STATIC CW FILE : /opt/bin/etc/constant.cw
WEBINFO USERNAME :XXX
WEBINFO PASSWORD :XXX

oscam.log
Reader hdplus aktiviert

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Feb 8 18:56:57 2011
-------------------------------------------------------------------------------
2011/02/08 18:56:57 4000 s version=1.00-unstable_svn, build #4100, system=powerpc-tuxbox-linux, nice=-1
2011/02/08 18:56:57 4000 s client max. idle=120 sec, debug level=0
2011/02/08 18:56:57 4000 s max. logsize=10 Kb
2011/02/08 18:56:57 4000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/02/08 18:56:57 4000 s client max. idle=120 sec, debug level=0
2011/02/08 18:56:57 4000 s max. logsize=10 Kb
2011/02/08 18:56:57 4000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/02/08 18:56:57 4000 s auth size=4800
2011/02/08 18:56:57 4000 s services reloaded: 0 services freed, 11 services loaded
2011/02/08 18:56:57 4000 s userdb reloaded: 0 accounts freed, 2 accounts loaded, 0 expired, 0 disabled
2011/02/08 18:56:57 4000 s signal handling initialized (type=sysv)
2011/02/08 18:56:57 4000 s 8 service-id's loaded
2011/02/08 18:56:57 4000 s can't open file "/opt/var/etc/oscam.tiers" (err=2), no tier-id's loaded
2011/02/08 18:56:57 4000 s 3 provid's loaded
2011/02/08 18:56:57 4000 s can't open file "/opt/var/etc/oscam.ird" (errno=2) irdeto guessing not loaded
2011/02/08 18:56:57 4000 s monitor: disabled
2011/02/08 18:56:57 4000 s camd33: disabled
2011/02/08 18:56:57 4000 s camd35: disabled
2011/02/08 18:56:57 4000 s cs378x: disabled
2011/02/08 18:56:57 4000 s newcamd: initialized (fd=6, port=34000, ip=127.0.0.1, crypted)
2011/02/08 18:56:57 4000 s CAID: 1702
2011/02/08 18:56:57 4000 s provid #0: 000000
2011/02/08 18:56:57 4000 s newcamd: initialized (fd=7, port=34001, ip=127.0.0.1, crypted)
2011/02/08 18:56:57 4000 s CAID: 1843
2011/02/08 18:56:57 4000 s provid #0: 000000
2011/02/08 18:56:57 4000 s cccam: disabled
2011/02/08 18:56:57 4000 s radegast: disabled
2011/02/08 18:56:57 4000 s http thread started
2011/02/08 18:56:57 4000 s creating thread for device /dev/ttyUSB0 slot 0
2011/02/08 18:56:57 4000 s creating thread for device /dev/ttyUSB1 slot 0
2011/02/08 18:56:57 4002 h HTTP Server listening on port 83
2011/02/08 18:56:57 8003 r reader thread started (thread= 8003, label=sky, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2011/02/08 18:56:57 4000 s waiting for local card init
2011/02/08 18:56:57 C004 r reader thread started (thread= C004, label=hdplus, device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2011/02/08 18:56:57 C004 r ERROR in IO_Serial_Read errno=11
2011/02/08 18:56:58 C004 r hdplus card detected
2011/02/08 18:56:59 8003 r sky card detected
2011/02/08 18:57:03 C004 r ATR: ** ** ** **
2011/02/08 18:57:03 C004 r ERROR: Could not read reader->convention
2011/02/08 18:57:03 C004 r Error activating card.
2011/02/08 18:57:04 8003 r ATR: ** ** ** **
2011/02/08 18:57:04 8003 r ERROR: Could not read reader->convention
2011/02/08 18:57:04 8003 r Error activating card.
2011/02/08 18:57:09 C004 r ATR: ** ** ** **
2011/02/08 18:57:09 C004 r ERROR: Could not read reader->convention
2011/02/08 18:57:09 C004 r Error activating card.
2011/02/08 18:57:10 8003 r ATR: ** ** ** **
2011/02/08 18:57:10 8003 r ERROR: Could not read reader->convention
2011/02/08 18:57:10 8003 r Error activating card.
2011/02/08 18:57:14 C004 r ATR: ** ** ** **9
2011/02/08 18:57:14 C004 r ERROR: Could not read reader->convention
2011/02/08 18:57:14 C004 r Error activating card.
2011/02/08 18:57:16 8003 r ATR: ** ** ** **
2011/02/08 18:57:16 8003 r ERROR: Could not read reader->convention
2011/02/08 18:57:16 8003 r Error activating card.
2011/02/08 18:57:20 C004 r ATR: ** ** ** **
2011/02/08 18:57:20 C004 r ERROR: Could not read reader->convention
2011/02/08 18:57:20 C004 r Error activating card.
2011/02/08 18:57:21 8003 r ATR: ** ** ** **
2011/02/08 18:57:21 8003 r ERROR: Could not read reader->convention
2011/02/08 18:57:21 8003 r Error activating card.
2011/02/08 18:57:26 C004 r ATR: ** ** ** **
2011/02/08 18:57:26 C004 r ERROR: Could not read reader->convention
2011/02/08 18:57:26 C004 r Error activating card.
2011/02/08 18:57:26 C004 r card initializing error
2011/02/08 18:57:27 8003 r ATR: ** ** ** ** ** ** ** **
2011/02/08 18:57:27 8003 r ERROR: Could not read reader->convention
2011/02/08 18:57:27 8003 r Error activating card.
2011/02/08 18:57:27 8003 r card initializing error
2011/02/08 18:57:28 4000 s init for all local cards done
2011/02/08 18:57:28 4000 s anti cascading disabled

Reader hdplus deaktiviert

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Feb 8 19:00:24 2011
-------------------------------------------------------------------------------
2011/02/08 19:00:24 4000 s version=1.00-unstable_svn, build #4100, system=powerpc-tuxbox-linux, nice=-1
2011/02/08 19:00:24 4000 s client max. idle=120 sec, debug level=0
2011/02/08 19:00:24 4000 s max. logsize=10 Kb
2011/02/08 19:00:24 4000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/02/08 19:00:24 4000 s auth size=4800
2011/02/08 19:00:24 4000 s services reloaded: 0 services freed, 11 services loaded
2011/02/08 19:00:24 4000 s userdb reloaded: 0 accounts freed, 2 accounts loaded, 0 expired, 0 disabled
2011/02/08 19:00:24 4000 s signal handling initialized (type=sysv)
2011/02/08 19:00:24 4000 s 8 service-id's loaded
2011/02/08 19:00:24 4000 s can't open file "/opt/var/etc/oscam.tiers" (err=2), no tier-id's loaded
2011/02/08 19:00:24 4000 s 3 provid's loaded
2011/02/08 19:00:24 4000 s can't open file "/opt/var/etc/oscam.ird" (errno=2) irdeto guessing not loaded
2011/02/08 19:00:24 4000 s monitor: disabled
2011/02/08 19:00:24 4000 s camd33: disabled
2011/02/08 19:00:24 4000 s camd35: disabled
2011/02/08 19:00:24 4000 s cs378x: disabled
2011/02/08 19:00:24 4000 s newcamd: initialized (fd=6, port=34000, ip=127.0.0.1, crypted)
2011/02/08 19:00:24 4000 s CAID: 1702
2011/02/08 19:00:24 4000 s provid #0: 000000
2011/02/08 19:00:24 4000 s newcamd: initialized (fd=7, port=34001, ip=127.0.0.1, crypted)
2011/02/08 19:00:24 4000 s CAID: 1843
2011/02/08 19:00:24 4000 s provid #0: 000000
2011/02/08 19:00:24 4000 s cccam: disabled
2011/02/08 19:00:24 4000 s radegast: disabled
2011/02/08 19:00:24 4000 s http thread started
2011/02/08 19:00:24 4000 s creating thread for device /dev/ttyUSB0 slot 0
2011/02/08 19:00:24 4000 s waiting for local card init
2011/02/08 19:00:24 4002 h HTTP Server listening on port 83
2011/02/08 19:00:24 8003 r reader thread started (thread= 8003, label=sky, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2011/02/08 19:00:26 8003 r sky card detected
2011/02/08 19:00:37 8003 r version=1.00-unstable_svn, build #4100, system=powerpc-tuxbox-linux, nice=-1
2011/02/08 19:00:37 8003 r client max. idle=120 sec, debug level=0
2011/02/08 19:00:37 8003 r max. logsize=10 Kb
2011/02/08 19:00:37 8003 r client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/02/08 19:00:37 8003 r chid: 7D27, date: ****/**/** - ****/**/**
...
2011/02/08 19:00:39 8003 r [irdeto-reader] ready for requests
2011/02/08 19:00:40 4000 s init for all local cards done
2011/02/08 19:00:40 4000 s anti cascading disabled

Vorgehensweise nach Systemstart (DS207)
Login mit telnet:

mknod /dev/ttyUSB0 c 188 0
mknod /dev/ttyUSB1 c 188 0

insmod /opt/lib/modules/2.6.15/kernel/drivers/usb/serial/usbserial.ko
insmod /opt/lib/modules/2.6.15/kernel/drivers/usb/serial/ftdi_sio.ko

lsmod:

Module Size Used by Tainted: P
ftdi_sio 31848 1
usbserial 32848 4 ftdi_sio
...

dmesg:

usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
usb 1-2.5: new full speed USB device using ehci_hcd and address 19
ftdi_sio 1-2.5:1.0: FTDI USB Serial Device converter detected
drivers/usb/serial/ftdi_sio.c: Detected FT232BM
usb 1-2.5: FTDI USB Serial Device converter now attached to ttyUSB0
usb 1-2.4: new full speed USB device using ehci_hcd and address 20
ftdi_sio 1-2.4:1.0: FTDI USB Serial Device converter detected
drivers/usb/serial/ftdi_sio.c: Detected FT232BM
usb 1-2.4: FTDI USB Serial Device converter now attached to ttyUSB1

cat /proc/bus/usb/devices:

...
T: Bus=01 Lev=02 Prnt=02 Port=99 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0403 ProdID=6001 Rev= 4.00
S: Product=USBDevice
S: SerialNumber=Reader 77
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

T: Bus=01 Lev=02 Prnt=02 Port=99 Cnt=02 Dev#= 19 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0403 ProdID=6001 Rev= 4.00
S: Product=USBDevice
S: SerialNumber=Reader 59
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

Smartreader Settings:
Reader 1:
Mode = Autoswitch
Kernel = Normal
T-Mode = T=0
EGT = 0

Reader 2:
Mode = Autoswitch
Kernel = Normal
T-Mode = T=0
EGT = 0

Smartreader Firmware:
Reader 1: 1.4
Reader 2: 1.4

cccam Server:
Shares:

HTML:

Available shares: 2

+----------------------+--------+----+---------+----------+-------+-------+
| Host                 | Type   |Caid| System  | Providers|Uphops | Nodes |
|                      |        |    |         |          |Maxdown|       |
+----------------------+--------+----+---------+----------+-------+-------+
|127.0.0.1:34000       |newcamd |1702|betacrypt|0,1,2,3   |1   7  |       |
|127.0.0.1:34001       |newcamd |1843|nagra    |0         |1   7  |       |
+----------------------+--------+----+---------+----------+-------+-------+

HTML:

Providers:

Available providers: 

+----+----------+--------------------------------------------+---------+
|Caid| Provider | Provider Name                              | System  |
+----+----------+--------------------------------------------+---------+
|1702|          |Premiere/Premiere Star (19E)[tunneled Nagra]|betacrypt|
|1702|         1|Premiere                                    |betacrypt|
|1702|         2|Premiere                                    |betacrypt|
|1702|         3|Premiere                                    |betacrypt|
|1843|          |Unknown                                     |nagra    |
+----+----------+--------------------------------------------+---------+

Daniel775 · 9. Februar 2011

AW: HD+ und Sky Karte laufen nur einzeln, nicht zusammen

Hat keiner eine Idee?
Ich habe irgendwie das Gefühl, das das Setting /dev/ttyUSB0 oder 1 garnix bringt. Er kann die Devices nicht auseinanderhalten. Weil wenn ich zum Beispiel für die HD+ Karte Device = /dev/ttyUSB1 zuweise, die Sky Karte als erstes in den USB-Hub einstecke und anschließend die HD+ Karte einstecke, danach die Sky Karte wieder entferne, dann müsste diese Hardwarezuweisung passen. Jedenfalls sagt mir dmesg das so.

Code:

...
usb 1-2.5: FTDI USB Serial Device converter now attached to ttyUSB0
...
usb 1-2.5: FTDI USB Serial Device converter now attached to ttyUSB1
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
...

Und komischerweise sagt mir die Log von oscam das er beide Karten gefunden hat. Obwohl nur eine drinsteckt!?

Code:

2011/02/09 15:41:18     8003 r reader thread started (thread=    8003, label=sky, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2011/02/09 15:41:18     C004 r reader thread started (thread=    C004, label=hdplus, device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2011/02/09 15:41:20     8003 r sky card detected
2011/02/09 15:41:20     C004 r hdplus card detected

zotte007 · 17. Juni 2011

AW: HD+ und Sky Karte laufen nur einzeln, nicht zusammen

@Daniel775

Folgendes: Ich besitze neuerdings eine Synology DS111 worauf ich Oscam + Smargo zum laufen gebracht habe.
Nun will ich eine HD+ Card (weiss) im Smargo betreiben. Leider klappt das nicht.
Egal welche Einstellungen ich im Smargo oder in der oscam.server (mhz,cardmhz,smargopatch) wähle, ich bekomme immer diese Fehlermeldung:

2011/06/17 23:46:09 401A1BA0 r hdplus card detected
2011/06/17 23:46:17 401A1BA0 r ATR: XX XX 95 XX FF 91 81 71 FE 47 00 XX 4E 41 XX
50 31 34 32 20 52 65 76 47 43 34 63
2011/06/17 23:46:18 401A1BA0 r Maximum frequency for this card is formally 5 Mhz
, clocking it to 3.57 Mhz
2011/06/17 23:46:20 401A1BA0 r detect native nagra card
2011/06/17 23:46:28 401A1BA0 r card system not supported
2011/06/17 23:46:28 401A1BA0 r Normal mode failed, reverting to Deprecated Mode
2011/06/17 23:46:36 401A1BA0 r ATR: XX XX 95 XX FF 91 81 71 FE 47 00 XX 4E 41 XX

Da du ein ähnliches System am laufen hast wollte ich fragen ob du mir deine Smargo HWConfig und den Server-Eintrag mitteilen kannst womit deine HD+ Card mittels Smargo/Oscam auf deiner Syno läuft.

HD+ und Sky Karte laufen nur einzeln, nicht zusammen

Daniel775

Ist gelegentlich hier

Daniel775

Ist gelegentlich hier

zotte007

Ist gelegentlich hier

Ähnliche Themen

HD+ und Sky Karte laufen nur einzeln, nicht zusammen

Daniel775

Ist gelegentlich hier

Daniel775

Ist gelegentlich hier

zotte007

Ist gelegentlich hier

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz