Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

( gelöst ) How to use *.image.in-memory

Zuletzt bearbeitet von einem Moderator:
Du musst schon in ein Verzeichnis gehen, in dem du Schreibrechte hast
 
Du hast recht ich habe / home / freetz benutzt ist alles ok danke.

Plase help my extact kernel-vr9-5490_07.01.bin and System-vr9-5490_07.01.map for my fritz 5490 not hawe 5491, thanks.

The
Du musst dich Anmelden oder Registrieren um diesen link zusehen!
trunk hawe only for 5491 not for 5490

Du musst dich Anmelden oder Registrieren um diesen Inhalt sichtbar zu machen!
 
@gobi2000 your Fritz box model is still quite new. I do not own any and can find it difficult to know which method will actually work. So you have to give it a try and report. Here are different instructions:

or here..
I found something about your box. That belongs to NAND-Flash-Modelle (DualBoot): h**ps://www.ip-forum.eu/howto-fritz-box-firmware-images-auch-unsignierte-ueber-den-bootloader-installieren-577
 
Zuletzt bearbeitet:
probably the wrong file will be used. the file is needed *.image.in-memory }"
 
Yes haw *.image.in-memory }

Du musst dich Anmelden oder Registrieren um diesen Inhalt sichtbar zu machen!
 
Zuletzt bearbeitet von einem Moderator:
@gobi2000 As I see it, there are 2 different things here:

1. in post # 68 you try an image on your Fritz box to flash

2. in post # 70 you are in the VMWare when building an image
 
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…