Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

astracoupe · 28. Oktober 2012

Hallo bekomme die HD02 (schwarz) nicht zum laufen! Die S02 funktioniert 1A

Hier mal die configs (cccam)

F: ***** *****
SERVER LISTEN PORT : 12000
ALLOW WEBINFO: yes
SHOW EXTENEDED CLIENT INFO : yes
WEBINFO LISTEN PORT : 16001
ALLOW TELNETINFO: yes
TELNETINFO LISTEN PORT : 16000
TELNETINFO USERNAME : cccam
TELNETINFO PASSWORD : cccam
SERIAL READER : /dev/ttyUSB0 Reader 1
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
DISABLE EMM : no
EXTRA EMM LEVEL : no
SHOW TIMING : yes
DEBUG : yes
SOFTKEY FILE : /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
AUTOROLL FILE : /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
STATIC CW FILE : /var/media/ftp/uStor01/cs/cccam/constant.cw
CAID PRIO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.prio
PROVIDERINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.providers
MINIMUM CLIENT VERSION : 2.0.9
#MINIMUM DOWNHOPS: 1

Hier die oscam config

[global]
serverip = 192.168.178.001
logfile = stdout
clienttimeout = 7500
lb_mode = 1
lb_save = 800
lb_savepath = /var/media/ftp/uStor01/cs/oscam/savepath/.oscam/stat
lb_nbest_readers = 1
lb_nfb_readers = 2
lb_min_ecmcount = 5
lb_max_ecmcount = 250
lb_reopen_seconds = 120
lb_retrylimit = 800
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid = 09C4
lb_stat_cleanup = 336
lb_use_locking = 1
lb_reopen_mode = 1
lb_max_readers = 5
lb_auto_betatunnel = 0
double_check = 0
fallbacktimeout = 2600
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 2480
waitforcards = 0
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
resolvegethostbyname = 0

#[monitor]
#port = 988
#nocrypt = 192.168.0.0-192.168.255.255
#aulow = 120
#hideclient_to = 0
#monlevel = 4
#appendchaninfo = 1

[cccam]
port = 51070
reshare = 0
version = 2.1.1
ignorereshare = 0
minimizecards = 0
stealth = 0
updateinterval = 240
keepconnected = 1
forward_origin_card = 1

[webif]
httpport = 20282
httpuser = oscam
httppwd = freetz
httpcss = /var/media/ftp/uStor01/cs/oscam//style.css
httprefresh = 10
httpallowed = 127.0.0.1,192.168.177.1-192.168.178.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

die oscam.server

[reader]
label = skysat
protocol = mouse
device = /dev/ttyUSB0
services = skyde
caid = 1702,1833
boxkey = 1122334455667788
ecmwhitelist = 1702:93
detect = cd
mhz = 600
cardmhz = 600
group = 2
emmcache = 1,3,2
lb_weight = 300

[reader]
label = austriasat_camd3
protocol = camd35
device = 127.0.0.1,34000
user = FB-CS-Server-AustriaSat
password = Local
services = austriasat
inactivitytimeout = 0
caid = 0D05
ecmwhitelist = 0D05@000010:9C
group = 3

[reader]
label = orf_camd3
protocol = camd35
device = 127.0.0.1,34000
user = FB-CS-Server-ORF
password = Local1
services = orfcw
inactivitytimeout = 0
caid = 0D05
ecmwhitelist = 0D05@000004:9C
group = 4

hir die oscam user

[account] ###User Home-Client
user = cccam
pwd = cccam
group = 1,2,3,4
au = hdplussat,skysat
services = hdplus,skyde,orfcw,austriasat,hdaustria
caid = 1830,1702,1833,0d05,0648
betatunnel = 1833.0078:1702,1833.006A:1702,1833.006B:1702,1833. 006F:1702,1833.0070:1702,1833.0071:1702,1833.0072: 1702,1833.0077:1702,1833.0081:1702,1833.0069:1702, 1833.0082:1702,1833.0083:1702,1833.0084:1702,1833. 007C:1702,1833.0076:1702,1833.0075:1702,1833.006C: 1702
cccmaxhops = 2
keepalive = 1
numusers = 0
penalty = 0
#
[account] ### User Inet-Client
user = *****
pwd = *****
group = 1,2
au = 0
services = hdplus,skyde
caid = 1830,1702,1833
betatunnel = 1833.0078:1702,1833.006A:1702,1833.006B:1702,1833. 006F:1702,1833.0070:1702,1833.0071:1702,1833.0072: 1702,1833.0077:1702,1833.0081:1702,1833.0069:1702, 1833.0082:1702,1833.0083:1702,1833.0084:1702,1833. 007C:1702,1833.0076:1702,1833.0075:1702,1833.006C: 1702
cccmaxhops = 0
keepalive = 1
numusers = 0
penalty = 0

Kermit · 28. Oktober 2012

AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

Hi,

mit was versuchst du denn jetzt wirklich die HD+ Karte zu lesen? In der oscam.server ist kein passender Eintrag zu finden.
Um die HD02 lesen zu können über CCcam wird CCcam in Version 2.3.0 benötigt und der Reader Eintrag in der CCcam.cfg ist dann auch falsch.
Die Kombination OScam/CCcam birgt zudem diverse Fallstricke. Warum machst du nicht alles entweder nur über CCcam oder OScam?

Grüße

Kermit

astracoupe · 28. Oktober 2012

AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

Hättest du ne einstellung für hd02 und s02 über oscam?

Kermit · 28. Oktober 2012

AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

Hi,

hier HowTo Oscam.server - Konfigurationsvorschläge für diverse Karten findest du Vorschläge für diverse Kartentypen. Jedem Reader gibst du seine eigene Gruppe und bei den Usern kannst du dann group = 1,2 festlegen oder auch eingrenzen, wer was nicht bekommen darf. die passenden Keys für den HD02 Reader kannst du dir am besten über dieses Link ist nicht mehr aktiv. Tool holen.
Deine Clients sind wahrscheinlich mit CCcam ausgerüstest und dann kommt folgender Link HowTo Wie baue ich einen Cccam.Client in oscam ein noch hinzu.

Grüße

Kermit

astracoupe · 28. Oktober 2012

AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

Ne client ist momentan noch ne Kathrein UFS910 die kann kein cccam. Später kommt noch ne vu+ ultimo hinzu

Kermit · 28. Oktober 2012

AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

Hi,

OK, aber dann läuft auf der Kathrein OScam oder was hast du dort für eine Cam laufen?
Wenn es OScam ist, dann bindest du die C-Line entsprechend in der oscam.server ein und gut ist.

Grüße

Kermit

joopastron · 28. Oktober 2012

AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

Bedenke auch das du den Eintrage DVBAPI benötigst auf dem Client

[dvbapi]
enabled = 1
au = 1
boxtype = ufs910
user = dvbapi
pmt_mode = 0

oscam.user:

[account]
user = dvbapi
pwd = dvbapi
group = 1
au = 1
uniq = 0

astracoupe · 10. November 2012

AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

So hab jetzt auf easymouse2 gewechselt! Sky funkt 1A aber die HD02 wird nicht hell! Hier mal die configs und der log

oscam.conf

[global]
#logfile = /var/media/ftp/System/logs/oscam.log
disablelog = 1
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 2480
waitforcards = 1
preferlocalcards = 0
saveinithistory = 1
readerrestartseconds = 5
resolvegethostbyname = 0

[monitor]
port = 988
aulow = 120
hideclient/to = 0
monlevel = 4
appendchaninfo = 1

[newcamd]
#port = 56780@0d95:000000
port = 56781@1830:003411
port = 56782@1702:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 0

[camd35]
port = 55555 << für L:Line zum CCcam für die ORF 0d95 Karte -- testen!! und berichten!!

[webif]
httpport = 56783
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.177.1-192.168.178.255
httphideidleclients = 0
httpreadonly = 0

oscam.server

[reader]
label = skysat
protocol = mouse
device = /dev/ttyUSB1
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 2
emmcache = 1,1,2

[reader]
label = HD+
device = /dev/ttyUSB0
Protocol = mouse
detect = cd
enable = 1
mhz = 357
cardmhz = 368
smargopatch = 1
CAID = 1843
ident = 1843:003411
emmcache = 1,3,2
group = 1
rsakey = BF3xxxxxxxEF0
boxkey = A7xxxxxx7C

oscam.user

[account]
user = 4all_HDplus
pwd = hdplus_share4all
disabled = 0
group = 1
uniq = 1
sleep = 0
monlevel = 0
au = hdplussat
#services = hdplus
caid = 1830
ident = 1830:003411
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0

[account]
user = 4all_SkySAT
pwd = skySAT_share4all
disabled = 0
group = 2
uniq = 1
sleep = 0
monlevel = 0
au = skysat
#services = SkyGermany
caid = 1702,1833
betatunnel = 1833.FFFF:1702
ident = 1702:000000
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0

oscam.services

[hdplus]
caid = 1830,1843
provid = 000000,003411,008011
srvid = EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,5273,5274, 1519

[SkyGermany]
caid=1702,1833
srvid=006f,0070,0071,0072,006b,006a,000A,000B,002B,0029,0009,0014,0204,0008,0203,0019,0083,0082,0081,0084,002a,0010,0024,0017,0032,001d,001b,0022,001c,0013,001a,000e,000d,000c,00a8,0206,0016,0018,0034,0015,000f,00df,0106,0110,2011a,0124,012e,0138,0142,014c,0156,0160,00fc,003c,003d,3397,4461,4462,003f,003e,3393,0042,3394,700A,0044,3398,0043,6ff1,7009,3331,3395,0035,0096,0097,0098,0099,009A,009B,009C,0015,0201,0159,0163,016d,0046,0011,00dd,00de,00fd,014d,0143,0139,012f,S0125,011b,0107,0111,016b,0175,0078

oscam.provid

verbindung von oscamm zu cccam

cccam.config

CCcam config
#N: 127.0.0.1 56780 4all_ORF orf_share4all 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
L: 127.0.0.1 55555 4all_ORF orf_share4all 0d95 000000 256 #<< das muss erst jemand bestätigen!
N: 127.0.0.1 56781 4all_HDplus hdplus_share4all 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 56782 4all_SkySAT skySAT_share4all 01 02 03 04 05 06 07 08 09 10 11 12 13 14
F: ufs910 kathrein
SERVER LISTEN PORT : 12000
ALLOW WEBINFO: yes
SHOW EXTENEDED CLIENT INFO : yes
WEBINFO LISTEN PORT : 16001
ALLOW TELNETINFO: yes
TELNETINFO LISTEN PORT : 16000
TELNETINFO USERNAME : cccam
TELNETINFO PASSWORD : cccam
DISABLE EMM : no
EXTRA EMM LEVEL : no
SHOW TIMING : yes
DEBUG : yes
SOFTKEY FILE : /Chroot/chroot-rootfs/var/etc/cccam/SoftCam.Key
AUTOROLL FILE : /Chroot/chroot-rootfs/var/etc/cccam/AutoRoll.Key
STATIC CW FILE : /Chroot/chroot-rootfs/var/etc/cccam/constant.cw
CAID PRIO FILE : /Chroot/chroot-rootfs/var/etc/cccam/CCcam.prio
PROVIDERINFO FILE : /Chroot/chroot-rootfs/var/etc/cccam/CCcam.providers
MINIMUM CLIENT VERSION : 2.0.9
#MINIMUM DOWNHOPS: 1

oscam.log

2012/11/10 17:10:40 5DB908 r hd+ [mouse] card system not supported
2012/11/10 17:10:40 5DB908 r hd+ [mouse] Normal mode failed, reverting to Deprecated Mode
2012/11/10 17:10:45 5DB908 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2012/11/10 17:10:46 5DB908 r hd+ [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.57 Mhz as specified by user in reader MHZ setting ?????
2012/11/10 17:10:47 5DB908 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 28
2012/11/10 17:10:48 5DB908 r hd+ [mouse] detect native nagra card
2012/11/10 17:10:52 5DB908 r hd+ [mouse] T1 Resync command error, trying to reactivate!
2012/11/10 17:10:57 5DB908 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2012/11/10 17:10:58 5DB908 r hd+ [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.57 Mhz as specified by user in reader MHZ setting
2012/11/10 17:10:58 5DB908 r hd+ [mouse] Card responded ok for ifsd request of 28
2012/11/10 17:10:59 5DB908 r hd+ [mouse] type: NAGRA, caid: 1843, IRD ID: ############
2012/11/10 17:10:59 5DB908 r hd+ [mouse] ProviderID: 00 00 34 11
2012/11/10 17:10:59 5DB908 r hd+ [mouse] active to: 2012/12/26 11:59
2012/11/10 17:10:59 5DB908 r hd+ [mouse] -----------------------------------------
2012/11/10 17:10:59 5DB908 r hd+ [mouse] |id |tier |valid from |valid to |
2012/11/10 17:10:59 5DB908 r hd+ [mouse] +----+--------+------------+------------+
2012/11/10 17:10:59 5DB908 r hd+ [mouse] |8011|0066 |2011/05/16 |2012/05/16 |
2012/11/10 17:10:59 5DB908 r hd+ [mouse] |8011|0067 |2010/01/19 |2010/01/20 |
2012/11/10 17:10:59 5DB908 r hd+ [mouse] |8011|0BEA |2012/05/27 |2013/07/01 |
2012/11/10 17:10:59 5DB908 r hd+ [mouse] -----------------------------------------
2012/11/10 17:11:02 5DB908 r hd+ [mouse] T1 Resync command error, trying to reactivate!
2012/11/10 17:11:06 5DB908 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2012/11/10 17:11:08 5DB908 r hd+ [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.57 Mhz as specified by user in reader MHZ setting
2012/11/10 17:11:08 5DB908 r hd+ [mouse] Card responded ok for ifsd request of 28
2012/11/10 17:11:08 5DB908 r hd+ [mouse] card system not supported
2012/11/10 17:11:08 5DB908 r hd+ [mouse] card initializing error
2012/11/10 17:11:09 0 s init for all local cards done
2012/11/10 17:11:09 0 s anti cascading disabled
2012/11/10 17:11:09 5E6D80 c client connected to 56782 port
2012/11/10 17:11:09 5E6D80 c anonymous disconnected from 127.0.0.1
2012/11/10 17:11:09 5E8588 c client connected to 56782 port
2012/11/10 17:11:09 0 --- Skipped 1 duplicated log lines ---
2012/11/10 17:11:09 5E5578 c anonymous disconnected from 127.0.0.1
2012/11/10 17:11:09 5E3590 c client connected to 56782 port
2012/11/10 17:11:09 5E3590 c anonymous disconnected from 127.0.0.1
2012/11/10 17:11:09 5E8588 c encrypted newcamd:56782-client 127.0.0.1 granted (4all_SkySAT, au=on (1 reader))
2012/11/10 17:11:09 5E8588 c user 4all_SkySAT authenticated successfully (CCcam)
2012/11/10 17:11:09 5E8588 c AU enabled for user 4all_SkySAT on reader skysat
2012/11/10 17:11:15 5E8588 c 4all_SkySAT (1702&000000/0000/0009/93:46ED): found (3004 ms) by skysat - 1702:0009 unknown
2012/11/10 17:11:23 5E8588 c 4all_SkySAT (1702&000000/0000/0009/93:C40E): found (632 ms) by skysat - 1702:0009 unknown
2012/11/10 17:11:33 5E8588 c 4all_SkySAT (1702&000000/0000/0009/93:4F7B): found (623 ms) by skysat - 1702:0009 unknown

Kermit · 10. November 2012

AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

Hi,

nimm in der oscam.server den Parameter ident raus und setze mhz auf 368.

Grüße

Kermit

astracoupe · 10. November 2012

AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

Geht leider immer noch nicht!

der neue log

2012/11/10 17:18:45 5DB908 r hd+ [mouse] Card responded ok for ifsd request of 28
2012/11/10 17:18:45 5DB908 r hd+ [mouse] card system not supported
2012/11/10 17:18:45 5DB908 r hd+ [mouse] Normal mode failed, reverting to Deprecated Mode
2012/11/10 17:18:50 5DB908 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2012/11/10 17:18:51 5DB908 r hd+ [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.68 Mhz as specified by user in reader MHZ setting
2012/11/10 17:18:52 5DB908 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 28
2012/11/10 17:18:53 5DB908 r hd+ [mouse] detect native nagra card
2012/11/10 17:18:55 5DB908 r hd+ [mouse] T1 Resync command error, trying to reactivate!
2012/11/10 17:19:00 5DB908 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2012/11/10 17:19:01 5DB908 r hd+ [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.68 Mhz as specified by user in reader MHZ setting
2012/11/10 17:19:01 5DB908 r hd+ [mouse] Card responded ok for ifsd request of 28
2012/11/10 17:19:02 5DB908 r hd+ [mouse] type: NAGRA, caid: 1843, IRD ID: ############
2012/11/10 17:19:02 5DB908 r hd+ [mouse] ProviderID: 00 00 34 11
2012/11/10 17:19:02 5DB908 r hd+ [mouse] active to: 2012/12/26 11:59
2012/11/10 17:19:02 5DB908 r hd+ [mouse] -----------------------------------------
2012/11/10 17:19:02 5DB908 r hd+ [mouse] |id |tier |valid from |valid to |
2012/11/10 17:19:02 5DB908 r hd+ [mouse] +----+--------+------------+------------+
2012/11/10 17:19:02 5DB908 r hd+ [mouse] |8011|0066 |2011/05/16 |2012/05/16 |
2012/11/10 17:19:03 5DB908 r hd+ [mouse] |8011|0067 |2010/01/19 |2010/01/20 |
2012/11/10 17:19:03 5DB908 r hd+ [mouse] |8011|0BEA |2012/05/27 |2013/07/01 |
2012/11/10 17:19:03 5DB908 r hd+ [mouse] -----------------------------------------
2012/11/10 17:19:05 5DB908 r hd+ [mouse] T1 Resync command error, trying to reactivate!
2012/11/10 17:19:10 5DB908 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2012/11/10 17:19:11 5DB908 r hd+ [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.68 Mhz as specified by user in reader MHZ setting
2012/11/10 17:19:11 5DB908 r hd+ [mouse] Card responded ok for ifsd request of 28
2012/11/10 17:19:11 5DB908 r hd+ [mouse] card system not supported
2012/11/10 17:19:11 5DB908 r hd+ [mouse] card initializing error
2012/11/10 17:19:12 0 s init for all local cards done
2012/11/10 17:19:12 0 s anti cascading disabled
2012/11/10 17:19:12 5E7FD0 c client connected to 56782 port
2012/11/10 17:19:12 0 --- Skipped 1 duplicated log lines ---
2012/11/10 17:19:12 5E67C8 c anonymous disconnected from 127.0.0.1
2012/11/10 17:19:12 5E4FC0 c client connected to 56782 port
2012/11/10 17:19:12 5E4FC0 c anonymous disconnected from 127.0.0.1
2012/11/10 17:19:12 5E2930 c client connected to 56782 port
2012/11/10 17:19:12 5E2930 c anonymous disconnected from 127.0.0.1
2012/11/10 17:19:12 5E7FD0 c encrypted newcamd:56782-client 127.0.0.1 granted (4all_SkySAT, au=on (1 reader))
2012/11/10 17:19:12 5E7FD0 c user 4all_SkySAT authenticated successfully (CCcam)
2012/11/10 17:19:12 5E7FD0 c AU enabled for user 4all_SkySAT on reader skysat
2012/11/10 17:19:12 5E7FD0 c 4all_SkySAT (1702&000000/0000/0009/93:2A4B): found (644 ms) by skysat - 1702:0009 unknown
2012/11/10 17:19:22 5E7FD0 c 4all_SkySAT (1702&000000/0000/0009/93:3944): found (634 ms) by skysat - 1702:0009 unknown

astracoupe · 10. November 2012

AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

Hd02 läuft jetzt (wird vom Oscam erkannt) Wird aber auf dem Client (UFS910) nicht hell

oscam.server

[reader]
Label = HDplusHD02
Protocol = mouse
Device = /dev/ttyUSB0
cardmhz = 368
Detect = CD
Group = 1
CAID = 1843
rsakey = BF3xxxxxxD5
boxkey = A76xxxxxx37C
EMMCache = 1,1,2

Client einstellungen

oscam.server

[reader]
label = VIP
protocol = cccam
device = 192.168.178.1,12000
account = ufs910,kathrein
group = 1,2
emmcache = 1,1,2
detect = CD
caid = 1702,1833,1830,0D05,0500,0B00,0100,1722,1834,1843
cccversion = 2.1.3
cccbuild = 3316

oscam.user

oscam.user

##### oscam.user#############
#
[account]
user = dvbapi
pwd = dvbapi
group = 1,2
au = 1
uniq=0
betatunnel = 1833.FFFF:1702
#
######## Ende ##############

oscam.conf

oscam.conf

############# oscam.conf ##################################
# #
[global]
Nice = -1
ClientTimeout = 7
FallbackTimeout=3
ClientMaxIdle=120
CacheDelay = 120
BindWait = 5
ResolveDelay = 15
WaitForCards = 1
PreferLocalCards = 1
LogFile = stdout
saveinithistory = 1
readerrestartseconds = 5
#LogFile = /var/keys/oscam.log
#usrfile = /var/keys/oscam_usr.log

[monitor]
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo = 1

[webif]
httpport = 12345
httpuser = admin
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[dvbapi]
enabled = 1
au = 1
boxtype = ufs910
user = dvbapi
#
########################## Ende ##########################################

DVBAPI

[dvbapi]
enabled = 1
au = 1
boxtype = ufs910
user = dvbapi
pmt_mode = 0

Client bekommt alles vom cccam

cccam.cfg

CCcam config
#N: 127.0.0.1 56780 4all_ORF orf_share4all 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
L: 127.0.0.1 55555 4all_ORF orf_share4all 0d95 000000 256 #<< das muss erst jemand bestätigen!
N: 127.0.0.1 56781 4all_HDplus hdplus_share4all 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 56782 4all_SkySAT skySAT_share4all 01 02 03 04 05 06 07 08 09 10 11 12 13 14
F: ufs910 kathrein
SERVER LISTEN PORT : 12000
ALLOW WEBINFO: yes
SHOW EXTENEDED CLIENT INFO : yes
WEBINFO LISTEN PORT : 16001
ALLOW TELNETINFO: yes
TELNETINFO LISTEN PORT : 16000
TELNETINFO USERNAME : cccam
TELNETINFO PASSWORD : cccam
DISABLE EMM : no
EXTRA EMM LEVEL : no
SHOW TIMING : yes
DEBUG : yes
SOFTKEY FILE : /Chroot/chroot-rootfs/var/etc/cccam/SoftCam.Key
AUTOROLL FILE : /Chroot/chroot-rootfs/var/etc/cccam/AutoRoll.Key
STATIC CW FILE : /Chroot/chroot-rootfs/var/etc/cccam/constant.cw
CAID PRIO FILE : /Chroot/chroot-rootfs/var/etc/cccam/CCcam.prio
PROVIDERINFO FILE : /Chroot/chroot-rootfs/var/etc/cccam/CCcam.providers
MINIMUM CLIENT VERSION : 2.0.9
#MINIMUM DOWNHOPS: 1

bombadil · 10. November 2012

AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

Hi,

bin mir nicht sicher, ob das für die Kathi stimmt

Code:

 account = ufs910,kathrein

sonst versuche das so

Code:

user = ufs910
pwd = kathrein

Der User dvbapi braucht kein Passwort

Code:

 pwd = dvbapi

löschen

Liebe Grüße
Bombadil

astracoupe · 11. November 2012

AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

Hat nicht funktioniert! Mit der änderung geht nicht mal Sky!

Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

astracoupe

Newbie

Kermit

Guest

astracoupe

Newbie

Kermit

Guest

astracoupe

Newbie

Kermit

Guest

joopastron

astracoupe

Newbie

Kermit

Guest

astracoupe

Newbie

astracoupe

Newbie

bombadil

astracoupe

Newbie

Ähnliche Themen

Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

Newbie

Kermit

Guest

Newbie

Kermit

Guest

Newbie

Kermit

Guest

Newbie

Kermit

Guest

Newbie

Newbie

Newbie

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz