Hallo Mitstreiter,
ich mache gerade meine ersten Schritte mit dem System 564 LX & Debian 6....
Ich bekomme diese Meldung und weiß leider nicht was ich damit machen soll.
Ist es so i.O. oder ....
Danke für die Info vorab.
Gruß swede
Using username "root".
Linux igel 2.6.32-5-686 #1 SMP Mon Jan 16 16:04:25 UTC 2012 i686
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Feb 26 23:06:52 2012 from pc-stefan-new.fritz.box
root@igel:~# apt-get install pcscd
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Statusinformationen werden eingelesen... Fertig
Die folgenden zusätzlichen Pakete werden installiert:
libc-bin libc6 libc6-i686 libccid libpcsclite1 libusb-1.0-0 locales
multiarch-support
Vorgeschlagene Pakete:
glibc-doc systemd
Die folgenden NEUEN Pakete werden installiert:
libccid libpcsclite1 libusb-1.0-0 multiarch-support pcscd
Die folgenden Pakete werden aktualisiert (Upgrade):
libc-bin libc6 libc6-i686 locales
4 aktualisiert, 5 neu installiert, 0 zu entfernen und 222 nicht aktualisiert.
Es müssen noch 0 B von 12,6 MB an Archiven heruntergeladen werden.
Nach dieser Operation werden 4.333 kB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren [J/n]? j
Lese Changelogs... Fertig
eglibc (2.13-25) unstable; urgency=medium
Starting with the eglibc package version 2.13-5, the libraries are
shipped in the multiarch directory /lib/<triplet> instead of the more
traditional /lib, where <triplet> is the multiarch triplet and can be
retrieved with 'dpkg-architecture -qDEB_HOST_MULTIARCH'. Similarly the
includes are now shipped in /usr/include/<triplet> instead of the more
traditional /usr/include.
The toolchain in Debian has been updated to cope with that, and most
build systems should be unaffected. If you are using a non-Debian
toolchain to build your software and it is not able to cope with
multiarch, you might try to pass the following options to your
compiler:
-B/usr/lib/<triplet> -I/usr/include/<triplet>
Alternatively if the build system makes hard to pass the above options,
you might try to set the LIBRARY_PATH and CPATH environment variables:
LIBRARY_PATH=/usr/lib/<triplet>
CPATH=/usr/include/<triplet>
export LIBRARY_PATH CPATH
-- Aurelien Jarno <aurel32@debian.org> Mon, 09 Jan 2012 12:47:16 +0100
eglibc (2.13-7) unstable; urgency=low
Starting with version 2.13, eglibc provides an SSSE3 optimized version
of memcpy() on the amd64 architecture. This version might copy memory
backward in some conditions, which causes issues if the source and
destination overlap. memmove() should be used in such cases, but some
programs still wrongly use memcpy().
For this reason, on the amd64 architecture the Debian package provides
two wrappers which can be use to workaround and/or debug the issue:
- /usr/lib/x86_64-linux-gnu/libc/memcpy-preload.so simply replace all
calls to memcpy() by a call to memmove()
- /usr/lib/x86_64-linux-gnu/libc/memcpy-syslog-preload.so does the same,
but in addition logs (with rate limit) the issue to syslog, so that it
can be detected and fixed.
To use these wrapper on a single binary, the easiest way is to use the
LD_PRELOAD environment variable:
- LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libc/memcpy-preload.so /path/to/binary
- LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libc/memcpy-syslog-preload.so /path/to/binary
For system-wide usage, it is possible to add the path of one of the
wrapper to /etc/ld.so.preload.
For more details about the issue, please see:
-- Aurelien Jarno <aurel32@debian.org> Sat, 11 Jun 2011 18:02:52 +0200
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
(END)
ich mache gerade meine ersten Schritte mit dem System 564 LX & Debian 6....
Ich bekomme diese Meldung und weiß leider nicht was ich damit machen soll.
Ist es so i.O. oder ....
Danke für die Info vorab.
Gruß swede
Using username "root".
Linux igel 2.6.32-5-686 #1 SMP Mon Jan 16 16:04:25 UTC 2012 i686
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Feb 26 23:06:52 2012 from pc-stefan-new.fritz.box
root@igel:~# apt-get install pcscd
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Statusinformationen werden eingelesen... Fertig
Die folgenden zusätzlichen Pakete werden installiert:
libc-bin libc6 libc6-i686 libccid libpcsclite1 libusb-1.0-0 locales
multiarch-support
Vorgeschlagene Pakete:
glibc-doc systemd
Die folgenden NEUEN Pakete werden installiert:
libccid libpcsclite1 libusb-1.0-0 multiarch-support pcscd
Die folgenden Pakete werden aktualisiert (Upgrade):
libc-bin libc6 libc6-i686 locales
4 aktualisiert, 5 neu installiert, 0 zu entfernen und 222 nicht aktualisiert.
Es müssen noch 0 B von 12,6 MB an Archiven heruntergeladen werden.
Nach dieser Operation werden 4.333 kB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren [J/n]? j
Lese Changelogs... Fertig
eglibc (2.13-25) unstable; urgency=medium
Starting with the eglibc package version 2.13-5, the libraries are
shipped in the multiarch directory /lib/<triplet> instead of the more
traditional /lib, where <triplet> is the multiarch triplet and can be
retrieved with 'dpkg-architecture -qDEB_HOST_MULTIARCH'. Similarly the
includes are now shipped in /usr/include/<triplet> instead of the more
traditional /usr/include.
The toolchain in Debian has been updated to cope with that, and most
build systems should be unaffected. If you are using a non-Debian
toolchain to build your software and it is not able to cope with
multiarch, you might try to pass the following options to your
compiler:
-B/usr/lib/<triplet> -I/usr/include/<triplet>
Alternatively if the build system makes hard to pass the above options,
you might try to set the LIBRARY_PATH and CPATH environment variables:
LIBRARY_PATH=/usr/lib/<triplet>
CPATH=/usr/include/<triplet>
export LIBRARY_PATH CPATH
-- Aurelien Jarno <aurel32@debian.org> Mon, 09 Jan 2012 12:47:16 +0100
eglibc (2.13-7) unstable; urgency=low
Starting with version 2.13, eglibc provides an SSSE3 optimized version
of memcpy() on the amd64 architecture. This version might copy memory
backward in some conditions, which causes issues if the source and
destination overlap. memmove() should be used in such cases, but some
programs still wrongly use memcpy().
For this reason, on the amd64 architecture the Debian package provides
two wrappers which can be use to workaround and/or debug the issue:
- /usr/lib/x86_64-linux-gnu/libc/memcpy-preload.so simply replace all
calls to memcpy() by a call to memmove()
- /usr/lib/x86_64-linux-gnu/libc/memcpy-syslog-preload.so does the same,
but in addition logs (with rate limit) the issue to syslog, so that it
can be detected and fixed.
To use these wrapper on a single binary, the easiest way is to use the
LD_PRELOAD environment variable:
- LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libc/memcpy-preload.so /path/to/binary
- LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libc/memcpy-syslog-preload.so /path/to/binary
For system-wide usage, it is possible to add the path of one of the
wrapper to /etc/ld.so.preload.
For more details about the issue, please see:
Sie müssen registriert sein, um Links zu sehen.
Sie müssen registriert sein, um Links zu sehen.
-- Aurelien Jarno <aurel32@debian.org> Sat, 11 Jun 2011 18:02:52 +0200
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
(END)
