Fehler r02 Cannot open device: /dev/ttyUSB0

2010/02/14 12:10:09 8967 r02 Cannot open device: /dev/ttyUSB0
2010/02/14 12:10:09 24064 c02 user (093B&000000/2DC6/8A:1BB8): fake (120 ms)
2010/02/14 12:10:11 24064 c02 user (093B&000000/2B5D/82:AE83): fake (120 ms)
2010/02/14 12:10:18 24064 c02 user (093B&000000/2DD9/8A:35D1): fake (120 ms)
2010/02/14 12:10:19 24064 c02 user (093B&000000/2DC6/8A:4029): fake (121 ms)
2010/02/14 12:10:20 24064 c02 user (093B&000000/2B5D/82:A91F): fake (120 ms)
2010/02/14 12:10:28 24064 c02 user (093B&000000/2DD9/8A:793C): fake (120 ms)
2010/02/14 12:10:29 24064 c02 Connection closed to client

Zum Vergrößern anklicken....

>> OSCam << cardserver started at Mon Feb 15 10:13:39 2010
-------------------------------------------------------------------------------
2010/02/15 10:13:39 2572 s version=0.99.4svn, build #1033, system=i686-pc-linux, nice=-1
2010/02/15 10:13:39 2572 s max. clients=509, client max. idle=120 sec
2010/02/15 10:13:39 2572 s max. logsize=unlimited
2010/02/15 10:13:39 2572 s client timeout=55000 ms, fallback timeout=2500 ms, cache delay=120 ms
2010/02/15 10:13:39 2572 s shared memory initialized (size=4171948, id=0)
2010/02/15 10:13:39 2572 s auth size=4740
2010/02/15 10:13:39 2572 s services reloaded: 0 services freed, 3 services loaded
2010/02/15 10:13:39 2572 s userdb reloaded: 0 accounts freed, 4 accounts loaded, 0 expired
2010/02/15 10:13:39 2572 s signal handling initialized (type=sysv)
2010/02/15 10:13:39 2572 s 2276 service-id's loaded
2010/02/15 10:13:39 2573 s monitor: initialized (fd=6, port=988)
2010/02/15 10:13:39 2573 s camd 3.3x: disabled
2010/02/15 10:13:39 2573 s camd 3.5x: disabled
2010/02/15 10:13:39 2573 s cs378x: disabled
2010/02/15 10:13:39 2573 s newcamd: initialized (fd=7, port=34000, crypted)
2010/02/15 10:13:39 2573 s CAID: 093B
2010/02/15 10:13:39 2573 s provid #0: 000000
2010/02/15 10:13:39 2573 s radegast: disabled
2010/02/15 10:13:39 2573 s resolver thread started
2010/02/15 10:13:39 2573 s logger started (pid=2575)
2010/02/15 10:13:39 2573 s resolver started (pid=2576, delay=30 sec)
2010/02/15 10:13:39 2573 s reader started (pid=2577, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2010/02/15 10:13:39 2573 s Waiting for local card init ....
2010/02/15 10:13:41 2577 r02 card detected
2010/02/15 10:13:47 2577 r02 Error activating card: -10
2010/02/15 10:13:53 2577 r02 Error activating card: -10
2010/02/15 10:14:00 2577 r02 Error activating card: -10
2010/02/15 10:14:06 2577 r02 Error activating card: -10
2010/02/15 10:14:12 2577 r02 Error activating card: -10
2010/02/15 10:14:13 2577 r02 card initializing error
2010/02/15 10:14:13 2573 s Init for all local cards done !
2010/02/15 10:14:13 2573 s anti cascading disabled

Zum Vergrößern anklicken....

2010/02/15 10:13:41 2577 r02 card detected
2010/02/15 10:13:47 2577 r02 Error activating card: -10
2010/02/15 10:13:53 2577 r02 Error activating card: -10
2010/02/15 10:14:00 2577 r02 Error activating card: -10
2010/02/15 10:14:06 2577 r02 Error activating card: -10
2010/02/15 10:14:12 2577 r02 Error activating card: -10
2010/02/15 10:14:13 2577 r02 card initializing error
2010/02/15 10:14:13 2573 s Init for all local cards done !
2010/02/15 10:14:13 2573 s anti cascading disabled

Zum Vergrößern anklicken....

OSCam cardserver v0.99.4svn, build #1033 (i686-pc-linux) - (w) 2009 streamboard SVN

Zum Vergrößern anklicken....

[global]
nice = -1
WaitForCards = 1
ClientTimeout = 55
#LogFile = stdout
CacheDelay = 120

[monitor]
port = 988
aulow = 120
monlevel = 1

[newcamd]
key = 0102030405060708091011121314
port = 34000@093b:000000

Zum Vergrößern anklicken....

[reader]
Label = SkyItalia
Protocol = mouse
Detect = cd
Device = /dev/ttyUSB0
#mhz = 357
EMMCache = 1,1,2
Group = 1
CAID = 093B
BoxID = xxxxxxx
Customspeed = 0
Fallback = 0

Zum Vergrößern anklicken....

###################################
[account]
user = agadir
pwd = souss
group = 1
uniq = 1
caid = 093b
ident = 093b:000000
AU = SkyItalia
monlevel = 0

Zum Vergrößern anklicken....

Underdog81 schrieb:

Stell mal die MHz fest ein an deinem Smargo

Zum Vergrößern anklicken....