FB7390 + Freetz + Smargo + HD02 (schwarze HD+)

[DEDEX7200Pro]

Hallo Leute,

ich brauche mal Hilfe, mein Receiver kann kein OSCam und die FritzBox kein CCCam, aber man soll ja OSCam entsprechend einstellen können. Meine Log gibt mir folgendes aus:

Spoiler

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Sat Oct 12 23:12:21 2013
-------------------------------------------------------------------------------
2013/10/12 23:12:21      400 s >> OSCam <<  cardserver started, version 1.10rc-s
2013/10/12 23:12:21      400 s version=1.10rc-svn, build #6089, system=mips-pc-l
2013/10/12 23:12:21      400 s client max. idle=120 sec, debug level=0
2013/10/12 23:12:21      400 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2013/10/12 23:12:21      400 s client timeout=5000 ms, fallback timeout=2000 ms,
2013/10/12 23:12:21      400 s services reloaded: 0 services freed, 1 services l
2013/10/12 23:12:21      400 s userdb reloaded: 1 accounts loaded, 0 expired, 0
2013/10/12 23:12:21      400 s signal handling initialized (type=sysv)
2013/10/12 23:12:21      400 s 18 service-id's loaded in 0ms
2013/10/12 23:12:21      400 s 18 tier-id's loaded
2013/10/12 23:12:21      400 s 5 provid's loaded
2013/10/12 23:12:21      400 s 22 lengths for caid guessing loaded
2013/10/12 23:12:21      400 s monitor: initialized (fd=9, port=988)
2013/10/12 23:12:21      400 s camd33: disabled
2013/10/12 23:12:21      400 s camd35: disabled
2013/10/12 23:12:21      400 s cs378x: disabled
2013/10/12 23:12:21      400 s newcamd: disabled
2013/10/12 23:12:21      400 s cccam: initialized (fd=10, port=12000, crypted)
2013/10/12 23:12:21      400 s radegast: disabled
2013/10/12 23:12:21      C04 h HTTP Server listening on port 83
2013/10/12 23:12:21      400 s http thread started
2013/10/12 23:12:21      400 s creating thread for device 002:002
2013/10/12 23:12:21     1005 r reader thread started (thread=    1005, label=hdp
2013/10/12 23:12:21     1005 r Using 0x82 as endpoint for smartreader hardware d
2013/10/12 23:12:21     1005 r Found smartreader device 002:002
2013/10/12 23:12:21      400 s loadbalancer: can't read from file /tmp/.oscam/st
2013/10/12 23:12:21      400 s waiting for local card init
2013/10/12 23:12:22     1005 r hdplus card detected
2013/10/12 23:12:25     1005 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53
2013/10/12 23:12:25     1005 r Maximum frequency for this card is formally 5 Mhz
2013/10/12 23:12:26     1005 r detect native nagra card
2013/10/12 23:12:27     1005 r [nagra-reader] type: NAGRA, caid: 1843, IRD ID: F
2013/10/12 23:12:27     1005 r [nagra-reader] ProviderID: 00 00 34 11
2013/10/12 23:12:27     1005 r [nagra-reader] active to: 2013/12/13 01:00
2013/10/12 23:12:29     1005 r -----------------------------------------
2013/10/12 23:12:29     1005 r |id  |tier    |valid from  |valid to    |
2013/10/12 23:12:29     1005 r +----+--------+------------+------------+
2013/10/12 23:12:29     1005 r |8011|0066    |2012/05/28  |2013/05/29  |
2013/10/12 23:12:29     1005 r |8011|0067    |2010/01/19  |2010/01/20  |
2013/10/12 23:12:29     1005 r |8011|0BEA    |2013/09/27  |2014/11/02  |
2013/10/12 23:12:29     1005 r -----------------------------------------
2013/10/12 23:12:31     1005 r card system not supported
2013/10/12 23:12:31     1005 r Normal mode failed, reverting to Deprecated Mode
2013/10/12 23:12:34     1005 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53
2013/10/12 23:12:34     1005 r Maximum frequency for this card is formally 5 Mhz
2013/10/12 23:12:36     1005 r detect native nagra card
2013/10/12 23:12:38     1005 r card system not supported
2013/10/12 23:12:38     1005 r card initializing error
2013/10/12 23:12:39      400 s init for all local cards done
2013/10/12 23:12:39      400 s anti cascading disabled
2013/10/12 23:12:39     1807 c anonymous disconnected  from 192.168.1.21
2013/10/12 23:12:39     1807 c thread     1807 ended!
2013/10/12 23:12:55     1C07 c encrypted cccam-client 192.168.1.21 granted (admi
2013/10/12 23:14:12     1005 r Error processing ecm for caid 1843, srvid EF14 (s
2013/10/12 23:14:12     1C07 c admin (1843&000000/EF14/89:668B): not found (1 ms
2013/10/12 23:14:13     1005 r Error processing ecm for caid 1843, srvid 151A (s
2013/10/12 23:14:13     1C07 c admin (1843&000000/151A/89:2BE9): not found (1 ms
2013/10/12 23:14:14     1005 r Error processing ecm for caid 1843, srvid 1519 (s
2013/10/12 23:14:14     1C07 c admin (1843&000000/1519/89:4069): not found (1 ms
2013/10/12 23:14:17     1005 r Error processing ecm for caid 1843, srvid 1519 (s
2013/10/12 23:14:17     1C07 c admin (1843&000000/1519/89:16DD): not found (1 ms
2013/10/12 23:14:24     1005 r Error processing ecm for caid 1843, srvid 1519 (s
2013/10/12 23:14:24     1C07 c admin (1843&000000/1519/89:9DF4): not found (1 ms
2013/10/12 23:14:31     1005 r Error processing ecm for caid 1843, srvid 1519 (s
2013/10/12 23:14:31     1C07 c admin (1843&000000/1519/89:701A): not found (1 ms
2013/10/12 23:14:39     1005 r Error processing ecm for caid 1843, srvid 157F (s
2013/10/12 23:14:39     1C07 c admin (1843&000000/157F/89:F858): not found (1 ms
2013/10/12 23:14:40     1005 r Error processing ecm for caid 1843, srvid 157F (s

Du musst angemeldet sein, um Bilder zu sehen.

 

[Enterprises]

AW: FB7390 + Freetz + Smargo + HD02 (schwarze HD+)

Erstmal Oscam updaten

version=1.10rc-svn, build #6089

Dann Reader Config posten weil:

card initializing error

 

[DEDEX7200Pro]

Ich hab mal ein Update gemacht auf die Version

v1.20-unstable_svn build r8959

Die oscam.log gibt nun folgendes zusätzlich aus, also card initialization error kommt nach wie vor:

cccam: Bind request failed, adress already in use, waiting another xx seconds

....

Hier die oscam.conf:

Spoiler

[global]logfile = /var/log/oscam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 1000
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance/save = 0


[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
hideclient/to = 30
monlevel = 1
appendchaninfo = 0


#[newcamd]
#port = 34001@1830:003411
#key = 0102030405060708091011121314
#allowed = 0.0.0.0-255.255.255.255
#keepalive = 0
#mgclient = 0


[cccam]
port = 12000
reshare = 2
version = 2.3.0
updateinterval = 0


[webif]
httpport = 81
httpuser = user
httppwd = password
httpcss = /var/InternerSpeicher/service/oscam/style.css
httprefresh = 10
httpallowed = 192.168.0.0-192.168.255.255
httphideidleclients = 1
httpreadonly = 0

Hier die oscam.server:

Spoiler

[reader]label = hdplus
protocol = smartreader
device = 002:002
smargopatch = 1
services = hdplus
caid = 1843
rsakey = BF...5D
boxkey = A7...7C
detect = cd
nagra_read = 1
mhz = 369
cardmhz = 369
ident = 1843:000000,003411,008011
group = 1
emmcache = 1,3,2
saveemm-g = 1

Hier die oscam.user:

Spoiler

[account]
user = user
pwd = password
group = 1
monlevel = 1
services = hdplus
caid = 1843
au = 1

Logauszug

Spoiler

-------------------------------------------------------------------------------
2013/10/13 10:38:25        0 s >> OSCam <<  cardserver started, version 1.20-uns
2013/10/13 10:38:25        0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1
2013/10/13 10:38:25        0 s services reloaded: 0 services freed, 1 services l
2013/10/13 10:38:25        0 s userdb reloaded: 1 accounts loaded, 0 expired, 0
2013/10/13 10:38:25        0 s signal handling initialized
2013/10/13 10:38:25        0 s 12 service-id's loaded in 0ms
2013/10/13 10:38:25        0 s 18 tier-id's loaded
2013/10/13 10:38:25        0 s 5 provid's loaded
2013/10/13 10:38:25        0 s 22 lengths for caid guessing loaded
2013/10/13 10:38:25        0 s monitor: initialized (fd=7, port=988)
2013/10/13 10:38:25        0 s cccam: initialized (fd=8, port=12000)
2013/10/13 10:38:25   5B2C98 h webif: decompressed 54245 bytes back into 154648
2013/10/13 10:38:25   5B2C98 h HTTP Server couldn't bind on port 81 (errno=125 A
2013/10/13 10:38:25        0 s hdplus [smartreader] creating thread for device 0
2013/10/13 10:38:25   5E0980 r hdplus [smartreader] Using 0x01/0x82 as endpoint
2013/10/13 10:38:25   5E0980 r Found smartreader device 002:002
2013/10/13 10:38:25        0 s loadbalancer: can't read from file /tmp/.oscam/st
2013/10/13 10:38:25        0 s waiting for local card init
2013/10/13 10:38:25   5E0980 r hdplus [smartreader] Reader initialized (device=0
2013/10/13 10:38:26   5E0980 r hdplus [smartreader] card detected
2013/10/13 10:38:29   5E0980 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71
2013/10/13 10:38:29   5E0980 r hdplus [smartreader] Init card protocol T1, FI=9,
2013/10/13 10:38:29   5E0980 r hdplus [smartreader] Calculated work ETU is 8.67
2013/10/13 10:38:29   5E0980 r hdplus [smartreader] ATR Fsmax is 5 MHz, clocking
2013/10/13 10:38:29   5E0980 r hdplus [smartreader] Card responded ok for ifsd r
2013/10/13 10:38:30   5E0980 r hdplus [smartreader] detect native nagra card
2013/10/13 10:38:34   5E0980 r hdplus [smartreader] Resync error: readtimeouts 0
2013/10/13 10:38:35   5E0980 r hdplus [smartreader] T1 Resync command error, try
2013/10/13 10:38:38   5E0980 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71
2013/10/13 10:38:38   5E0980 r hdplus [smartreader] Init card protocol T1, FI=9,
2013/10/13 10:38:38   5E0980 r hdplus [smartreader] Calculated work ETU is 8.67
2013/10/13 10:38:39   5E0980 r hdplus [smartreader] ATR Fsmax is 5 MHz, clocking
2013/10/13 10:38:39   5E0980 r hdplus [smartreader] Card responded ok for ifsd r
2013/10/13 10:38:39   5E0980 r hdplus [smartreader] card system not supported
2013/10/13 10:38:39   5E0980 r hdplus [smartreader] Normal mode failed, revertin
2013/10/13 10:38:42   5E0980 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71
2013/10/13 10:38:42   5E0980 r hdplus [smartreader] Init card protocol T1, FI=9,
2013/10/13 10:38:42   5E0980 r hdplus [smartreader] Calculated work ETU is 100.8
2013/10/13 10:38:43   5E0980 r hdplus [smartreader] ATR Fsmax is 5 MHz, clocking
2013/10/13 10:38:44   5E0980 r hdplus [smartreader] Warning: Card returned error
2013/10/13 10:38:45   5E0980 r hdplus [smartreader] detect native nagra card
2013/10/13 10:38:46   5E0980 r hdplus [smartreader] Resync error: readtimeouts 0
2013/10/13 10:38:47   5E0980 r hdplus [smartreader] T1 Resync command error, try
2013/10/13 10:38:50   5E0980 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71
2013/10/13 10:38:50   5E0980 r hdplus [smartreader] Init card protocol T1, FI=9,
2013/10/13 10:38:50   5E0980 r hdplus [smartreader] Calculated work ETU is 8.67
2013/10/13 10:38:50   5E0980 r hdplus [smartreader] ATR Fsmax is 5 MHz, clocking
2013/10/13 10:38:50   5E0980 r hdplus [smartreader] Card responded ok for ifsd r
2013/10/13 10:38:54   5E0980 r hdplus [smartreader] Resync error: readtimeouts 0
2013/10/13 10:38:55   5E0980 r hdplus [smartreader] T1 Resync command error, try
2013/10/13 10:38:59   5E0980 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71
2013/10/13 10:38:59   5E0980 r hdplus [smartreader] Init card protocol T1, FI=9,
2013/10/13 10:38:59   5E0980 r hdplus [smartreader] Calculated work ETU is 8.67
2013/10/13 10:38:59   5E0980 r hdplus [smartreader] ATR Fsmax is 5 MHz, clocking
2013/10/13 10:38:59   5E0980 r hdplus [smartreader] Card responded ok for ifsd r
2013/10/13 10:38:59   5E0980 r hdplus [smartreader] card system not supported
2013/10/13 10:38:59   5E0980 r hdplus [smartreader] card initializing error
2013/10/13 10:39:00        0 s init for all local cards done
2013/10/13 10:39:00        0 s anti cascading disabled
2013/10/13 10:41:43   5E8770 c anonymous disconnected from 192.168.1.21
2013/10/13 10:42:16   5E8770 c encrypted cccam-client 192.168.1.21 granted (admi
2013/10/13 10:42:38   5E8770 c user(1843&000000/0000/EF74/89:727D18C1AAD1ED8C5 .....) : rejected group (0ms) - Sat.1 HD (No matching reader)

Kurze frage, wie kann ich eigentlich die komplette log File laden?

 

[mxer]

AW: FB7390 + Freetz + Smargo + HD02 (schwarze HD+)

cccam: Bind request failed, adress already in use

Rennt Cccam noch im Hintergrund?
Ausmachen und nur oscam starten lassen, sonst krallt sich cccam die Karte und oscam kommt nicht zum Zuge.
Laß auch mal die Idents leer, kannst Du später immernoch reinnehmen.

Nicht 369MHz sondern 368MHz nehmen.
Oder leerlassen.

 

[DEDEX7200Pro]

AW: FB7390 + Freetz + Smargo + HD02 (schwarze HD+)

CCCam läuft gar nicht, auf der 7390 ist nur OSCam drauf, nachher soll aber ein CCCam Client drauf zu greifen. Muss ich bei USB2Serial Einstellungen vornehmen?!?

 

[mxer]

AW: FB7390 + Freetz + Smargo + HD02 (schwarze HD+)

Wenn der Smargo nicht im Mouse-Modus läuft: FTDI-SIO Treiber raus.

 

[DEDEX7200Pro]

AW: FB7390 + Freetz + Smargo + HD02 (schwarze HD+)

okay, war und ist so eingestellt, hab jetzt auf 368 MHz abgeändert, immer noch kein Erfolg. Die idents sind raus. Der Bind-Fehler ist weg. PL2303 muss auch raus, oder? Bzw. ist draußen

Neue Log:

Spoiler

-------------------------------------------------------------------------------


 monitor: initialized (fd=7, port=988)
 cccam: Bind request failed (Address already in use), waiting another 119 second
 cccam: Bind request failed (Address already in use), waiting another 29 seconds




     0 s creating pidfile /tmp/.oscam/oscam.pid with pid 12527
     0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
signal handling initialized
218 service-id's loaded in 8ms
2013/10/13 12:59:35   5B3C60 h webif: decompressed 54245 bytes back into 154648
2:59:54   5E8578 r hdplus [smartreader] detect native nagra card
 Calculated work ETU is 100.81 us
 ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.69 MHz (specifi
 Warning: Card returned error on setting ifsd value to 28
 detect native nagra card
 Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
 T1 Resync command error, trying to reactivate!
 ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30
 Init card protocol T1, FI=9, F=512, D=16, N=255
 Calculated work ETU is 8.67 us
 ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.69 MHz (specifi
 Card responded ok for ifsd request of 28
 Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
 T1 Resync command error, trying to reactivate!
 ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30
 Init card protocol T1, FI=9, F=512, D=16, N=255
 Calculated work ETU is 8.67 us
 ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.69 MHz (specifi
 Card responded ok for ifsd request of 28
 card system not supported
 card initializing error

 

[mxer]

AW: FB7390 + Freetz + Smargo + HD02 (schwarze HD+)

Smargo ist wie eingestellt?
Sollte so sein:
auto
normal
0
0

Software 1.05

P.S.: laß mal testweise den Nagra-Dingens auf 0.

 

[Enterprises]

AW: FB7390 + Freetz + Smargo + HD02 (schwarze HD+)

Nimm mal eine andere Oscam: v1.20-unstable_svn build r8959
etwas älter zBsp: 8828

Das kann auch raus

smargopatch = 1
nagra_read = 1

 

[mxer]

AW: FB7390 + Freetz + Smargo + HD02 (schwarze HD+)

Smargopatch = 0
Und damit soll der Smargo gehen?

 

[horstlacht]

AW: FB7390 + Freetz + Smargo + HD02 (schwarze HD+)

Stell das mal so ein
Damit ist dann meine Smargo losgelaufen. Hast du Smargo auch direkt am USB Port der freetz dran?


mhz = 600
cardmhz = 369

Smargopatch habe ich auch nicht gesetzt.

 

[Enterprises]

AW: FB7390 + Freetz + Smargo + HD02 (schwarze HD+)

Der Smargopatch ist schon lang nimmer nötig

 

[mxer]

AW: FB7390 + Freetz + Smargo + HD02 (schwarze HD+)

Aha, danke, wieder dazugelernt. :good: