Fausto + MultiCAS

[kiliantv]

Fausto + MultiCAS tutorial

1st Install "setup.exe Fausto v1.43 Windows on a PC.

2nd Insert FTP files "cccam.cfg" and "newcamd.cfg in AZbox folder / plugins / OpenXCAS / MultiCAS
(NOTE: prior to insertion in each file set the IP address that has a PC, that is where all writes N: 192.168.xy enter the IP address of your PC)

3rd Insert file "FaustoServers.cfg in the following sub-folder on the PC where the installed Fausto (C: \ Program Files \ Fausto \ EMU \ CardServer)
(NOTE: prior to inserting the file set the IP address that has a PC, that is where all writes N: 192.168.xy enter the IP address of your PC)

4th Unpack the archive "Fausto keys.zip" and put all files in the following sub-folder on the PC where the installed Fausto (C: \ Program Files \ Fausto \ Keys)

5th Fausto Start by clicking the icon on the desktop PC.

6th Select Tools -> Emulator -> Server -> Manager, click the Load and Start.

7th TAB select Monitor, click on the folder icon with a green arrow to enter the path to KEYS.BIN file (C: \ Program Files \ Fausto \ Keys)

8th Make a MultiCAS restart to connect to the server Fausto.

9th Switch to a channel package from CanalDigitaal (19.2E), for example. Film1.1, TMF, RTL4, and so on. and will open it immediately. In addition to the package, opens the new Cy (13E) channels as well as Bulsatcom (39E) + Arena Sports 1-4.
Note: Cyprus Cy new channels at any time change the keys and see them on the homepage and manually add in Fausto Emulator.


keys date 12.04.2010

Gracias a dvlajkovic

Nicht von mir getestet.

New Fausto Version 1.43 (15/03/2010)

 

[2predator]

AW: Fausto + MultiCAS

hi

wollte mal fragen was das für vorteile bringen soll gegenüber einen cccam server?

 

[kiliantv]

AW: Fausto + MultiCAS

Here's how to open up Viasat channels at Sirius 4.8E in softencrypted NDS(Videoguard) format using

Fausto EMU + AZbox HD + MultiCAS:

1. Insert by FTP files "CCcam.cfg" and "newcamd.cfg in Azbox folder /PLUGINS/OpenXCAS/MultiCAS.
(NOTE: Prior to insertion, edit each file in order to set IP address of your PC.
Where it reads N: 192.168.x.y enter IP address of your PC).
2. Insert attached file "FaustoServers.cfg" in the sub-folder of your PC where Fausto is installed (C:\Program Files\Fausto\EMU\CardServer)
(NOTE: Before inserting the file, edit it in order to set IP address of your PC. Hence, where it reads N: 192.168.x.y enter IP address of your PC).
3. Start Fausto by clicking on its icon at your desktop of PC.
4. Select Tools > Emulator > Server > Manager, click on Load button and then on Start button.
5. Select TAB Monitor, click on the folder icon with a green arrow to enter the following path to “KEYS.BIN” file (C:\Program Files\Fausto\Keys).
6. Make a restart of MultiCAS.
7. Enter the settings of MultiCAS: Plug-ins > OpenXCAS > Camd Setup > MultiCAS > Smartcard interface > Smart Card Splitter & CS.
8. Press "Left" arrow button (next to OK) of your remote control to select "Client NewCamd”.
9. Press “Blue” button of your remote control to "Load Configuration".
10. Press “Red” button of your remote control to "Save".
11. Press "Close" button of your remote control.
12. Confirm "All login to server" with YES.
13. Go to TV mode with the "Close" button of your remote control.
14. Make (again!) restart of MultiCAS.
15. Wait for MultiCAS to connect to Fausto Server (the screen should briefly read “Success 5/5”).
16. Switch to one of the channels from the package (i.e. DR 1) and wait till it's decoded (complete list of all channels that can be watched this way is attached here below)

NOTE: no keys needed to watch these Viasat channels, but I've included the latest ones for those that follow Canal Digit**l

Nicht von mir getestet.