EPG / Telextext / Sendung

[Drachenbluter2]

Habe folgendes Problem, das weder im EPG noch in der Kanalliste die EPG Daten regelmäßg geladen werden oder sogar fast nie.

Ich muss dafür durch jeden Sender Seppen, damit ich diese Daten sehen kann.
Was muss ich machen, damit die Daten endlich Abgerufen werden z.b aus dem internet oder so.

Weil dies schon sehr Nervt, habe Sat und Kabel angeschlossen!

habe auch schon den EPG Refresh aber irgend wie brachte er auch nichts

 

[McMighty]

AW: EPG / Telextext / Sendung

EPG Refresh richtig eingestellt? Bouquet oder Kanäle explizit angegeben?

 

[Drachenbluter2]

AW: EPG / Telextext / Sendung

Wollte gerade hin gehen und auf Bouquet erneut einstellen,
aber es kommt immer nur

Zurzeit läuft gerade eine Aktualisirung, diese aktion ist derzeit nicht möglich.

Immer wenn ich die Einstelling speicher möchte, selbst wenn ich über Funktion die Aktuallisirung Stope kommt die meldung beim speichern versuch.
Habe auch schon das Plugin Entfernt, Box neu gestartet und neu Installiert
Selbe problem wieder.

Auch nach 15 Minuten kann ich nicht Abspeichern.

 

[McMighty]

AW: EPG / Telextext / Sendung

Das ist komisch. Das Plugin scheint da irgendwie fehlerhaft zu sein. Zeiten kannst Du nicht ändern? Aktualisiere von 4Uhr bis 5Uhr, 10Sekunden pro Kanal...

 

[Drachenbluter2]

AW: EPG / Telextext / Sendung

Nichts kann ich ändern, kommt immer nur die Meldung
Zurzeit läuft gerade eine Aktualisirung, diese aktion ist derzeit nicht möglich.

 

[Drachenbluter2]

AW: EPG / Telextext / Sendung

Komisch über das Webinterface kann ich es ändern ! Aber EPG werden nicht Erneuert, Kanalliste ist immer noch leer nur die sendernamen

Du musst angemeldet sein, um Bilder zu sehen.

 

[McMighty]

AW: EPG / Telextext / Sendung

Siehe Deinen anderen Post. Flashe mal neu. Dein Image ist irgendwie komplett schräg

 

[Megabit]

AW: EPG / Telextext / Sendung

Schickst du deine Box nach beenden in den Standby oder Deep Standby? Wenn du sie komplett aus schaltest, ist der Epg-refresh aus. Stelle einfach um auf Pseudoaufnahmen, dann sollte es gehen.

Und wie McMighty schon schrieb, hast du mit Blau auch deine Bouquets markiert?

 

[Drachenbluter2]

Wenn ich im Webinterface auf Jetzt Auffrischen gehe kommt

Spoiler

web.Server Traceback (most recent call last)web.Server Traceback (most recent call last): div.error { color: red; font-family: Verdana, Arial, helvetica, sans-serif; font-weight: bold; } div { font-family: Verdana, Arial, helvetica, sans-serif; } div.stackTrace { } div.frame { padding: 1em; background: white; border-bottom: thin black dashed; } div.frame:first-child { padding: 1em; background: white; border-top: thin black dashed; border-bottom: thin black dashed; } div.location { } span.function { font-weight: bold; font-family: "Courier New", courier, monospace; } div.snippet { margin-bottom: 0.5em; margin-left: 1em; background: #FFFFDD; } div.snippetHighlightLine { color: red; } span.code { font-family: "Courier New", courier, monospace; } exceptions.AttributeError: 'NoneType' object has no attribute 'valid' /usr/lib/python2.7/site-packages/twisted/web/server.py:189 in process 188 189 190 /usr/lib/python2.7/site-packages/twisted/web/server.py:238 in render 237 238 239 /usr/lib/enigma2/python/Plugins/Extensions/EPGRefresh/EPGRefreshResource.py:24 in render 23 24 25 /usr/lib/enigma2/python/Plugins/Extensions/EPGRefresh/EPGRefresh.py:187 in forceRefresh 186 187 188 /usr/lib/enigma2/python/Plugins/Extensions/EPGRefresh/EPGRefresh.py:309 in prepareRefresh 308 309 310 /usr/lib/enigma2/python/Plugins/Extensions/EPGRefresh/EPGRefresh.py:274 in generateServicelist 273 274 275 /usr/lib/enigma2/python/Plugins/Extensions/EPGRefresh/EPGRefresh.py:215 in addServices 214 215 216 exceptions.AttributeError: 'NoneType' object has no attribute 'valid'

 

[Megabit]

AW: EPG / Telextext / Sendung

Da hast du keine Bouquets angegeben...Wenn du im EPG die Blaue Taste drückst, siehst du deine Fav Ordner. Jetzt mit Links/Rechts zwischen Sender und Bouquet wechseln. Wenn du keinen Sender hinzufügst, nimmt es die gesamten Favoriten.

Evtl. verträgt der Skin sich nicht mit dem EPG-Refresh.

 

[Drachenbluter2]

AW: EPG / Telextext / Sendung

Laut einstellung sind die Favos eingespeichert !

 

[Megabit]

AW: EPG / Telextext / Sendung

Hmm, teste mal mit einem anderen Skin....Ich habe den dmconcinnity HD, der läuft mit allem....

Und nicht !!! über das WebIF steuern...Mit der FB !

 

[Drachenbluter2]

AW: EPG / Telextext / Sendung

Nun stürtz wegen dem EPG refresher ständig die box ab

Spoiler

<crashlogs>
<enigma2crashlog>
<![CDATA[
tc/enigma2//userbouquet.dbe05.tv
10 entries in Bouquet userbouquet.dbe05.tv
loading bouquet... /etc/enigma2//userbouquet.austriasat.tv
20 entries in Bouquet userbouquet.austriasat.tv
loading bouquet... /etc/enigma2//userbouquet.dbe03.tv
3 entries in Bouquet userbouquet.dbe03.tv
loading bouquet... /etc/enigma2//userbouquet.dbe06.tv
17 entries in Bouquet userbouquet.dbe06.tv
loading bouquet... /etc/enigma2//userbouquet.erotik.tv
23 entries in Bouquet userbouquet.erotik.tv
loading bouquet... /etc/enigma2//userbouquet.3d.tv
2 entries in Bouquet userbouquet.3d.tv
loading bouquet... /etc/enigma2//userbouquet.favourites.tv
0 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2//userbouquet.LastScanned.tv
1423 entries in Bouquet userbouquet.LastScanned.tv
22 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2//bouquets.radio
loading bouquet... /etc/enigma2//userbouquet.radio_deutsch.radio
81 entries in Bouquet userbouquet.radio_deutsch.radio
loading bouquet... /etc/enigma2//userbouquet.dbe04.radio
15 entries in Bouquet userbouquet.dbe04.radio
loading bouquet... /etc/enigma2//userbouquet.dbe05.radio
0 entries in Bouquet userbouquet.dbe05.radio
loading bouquet... /etc/enigma2//userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
4 entries in Bouquet bouquets.radio
Renumbering...
[Time By]: Transponder
[EPGC] time updated.. but cache file not set yet.. dont start epg!!
[FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
[FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
[FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
[FONT] adding font /usr/share/enigma2/MetrixHD_MOD/fonts/Raleway-Regular.ttf...OK (Regular)
[FONT] adding font /usr/share/enigma2/MetrixHD_MOD/fonts/Raleway-Light.ttf...OK (RegularLight)
[FONT] adding font /usr/share/enigma2/MetrixHD_MOD/fonts/Raleway-Channel.ttf...OK (Block)
[FONT] adding font /usr/share/enigma2/MetrixHD_MOD/fonts/Meteocons.ttf...OK (Meteo)
[FONT] adding font /usr/share/fonts/LiberationSans-Regular.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/LiberationSans-Italic.ttf...OK (Subsi)
[FONT] adding font /usr/share/fonts/LiberationSans-Bold.ttf...OK (Subsb)
[FONT] adding font /usr/share/fonts/LiberationSans-BoldItalic.ttf...OK (Subsz)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: German keyboard
Activating language Deutsch
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: auto
[VideoMode] setting policy2: letterbox
[VideoMode] setting scaler_sharpness to: 0000000D
[VideoMode] setMode - port: HDMI, mode: 1080i, rate: 60Hz
Renumbering...
[EPGC Loads] Poller enabled.
[EPGC Save] Poller enabled.
[EPGC] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
setLCDBrightness 76
setLCDBrightness 153
Setting OSD position: 0 720 0 576
Setting OSD alpha: 255
Setting 3D mode: auto
Setting 3D depth: 50
[EPGC Save] Poller enabled.
[EPGC Loads] Poller enabled.
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
[Ipkg] Added to OPKG destinations: /
[Info-Panel] machinebrand: GigaBlue
[Info-Panel] machinename: 800 UE
[Info-Panel] oem name: gigablue
[Info-Panel] boxtype: gb800ue
[EPGRefresh] Error registering Notification-Domain: 'module' object has no attribute 'notificationQueue'
Plugin Extensions/WebInterface failed to load: No module named plugin
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> setting splitmode to: off
--> setting sharpness to: 00000000
--> setting auto_flesh to: 00000000
--> setting green_boost to: 00000000
--> setting blue_boost to: 00000000
--> setting dynamic_contrast to: 00000000
--> setting color_soace to: Edid(Auto)
--> setting scaler_vertical_dejagging to: disable
--> setting smooth to: disable
--> applying pep values
[AutoTimer] Auto Poll Enabled
[SwapManager] autostart
('skin: default', None, 'D')
('skin: default_FHD', None, 'D')
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/DreamPlex/skins/default/OpenSans.ttf...OK (OpenSans)
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 1 CI Slots
[CI_Activate_Config_CI0] no config file found
[CI_Activate_Config_CI0] error parsing xml...
[LED-GIGA] sessionstart
starting hotplug handler
[NAVIGATION] wasTimerWakeup = False, current time is Wed Aug 12 22:20:32 2015
[CrossEPG_Auto] AutoStart Enabled
[CrossEPG_Auto] Schedule Enabled at Mi 12 Aug 2015 22:20:32 CEST
[CrossEPG_Auto] Time set to Do 13 Aug 2015 16:00:00 CEST (now=Mi 12 Aug 2015 22:20:32 CEST)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
[SwapManager] autostart
EMC: +++ EMC V4.0.0beta20150525 startup
[EMC] checkImg is not Vti cannot import name BT_FIXRATIO
[LED-GIGA] sessionstart
[LED-GIGA] Starting !!
[LED-GIGA] initializing
[LED-GIGA] initVFD box = gb800ue
[(100, <class 'Screens.InfoBar.InfoBar'>)]
warning, skin is missing element key_yellow in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element key_blue in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element epg_description in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element key_green in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element key_red in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
[SKIN] No skin to read...
[SCREENNAME] RdsInfoDisplaySummary
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
warning, skin is missing element Tuner in <class 'Screens.Dish.Dish'>
warning, skin is missing element PTSSeekPointer in <class 'Screens.PVRState.TimeshiftState'>
warning, skin is missing element statusicon in <class 'Screens.PVRState.TimeshiftState'>
warning, skin is missing element eventname in <class 'Screens.PVRState.TimeshiftState'>
warning, skin is missing element PTSSeekBack in <class 'Screens.PVRState.TimeshiftState'>
warning, skin is missing element speed in <class 'Screens.PVRState.TimeshiftState'>
RemovePopup, id = ZapError
MetrixMODWeather lookup for ID 667931
warning, skin is missing element key_blue in <class 'Screens.InfoBar.InfoBar'>
warning, skin is missing element key_red in <class 'Screens.InfoBar.InfoBar'>
warning, skin is missing element key_green in <class 'Screens.InfoBar.InfoBar'>
warning, skin is missing element key_yellow in <class 'Screens.InfoBar.InfoBar'>
[SCREENNAME] RdsInfoDisplay
[LcdPicon] adding path: /media/hdd/picon/
[SCREENNAME] InfoBarSummary
[SCREENNAME] InfoBar
setValue 45
Setvolume: 45 45 (raw)
Setvolume: 35 35 (-1db)
main thread is non-idle! display spinner!
lastshutdown=True (True = last shutdown was OK)
NOK shutdown action=normal
bootup action=normal
[LogManager] Trim Poll Started
[EPGC] Refreshing EPGCache.
[EPGC] 7384 events read from /media/hdd/epg.dat
[LogManager] Trash Poll Started
[LogManager] probing folders
[LogManager] found following log's: ['/home/root/logs']
[LogManager] looking in: /home/root/logs
[LogManager] /home/root/logs: bytesToRemove -10245133
[NTP]: setting E2 time: 1439410837.68
set RTC to 2015/08/12 22:20 (rtc_offset = 7200 sec.)
[EPGC] time updated.. start EPG Mainloop
EMC: Setting EPG language: de_DE
[CAMSTARTER] Start/Check: 1
2015-08-12 22:20:38.231475
[CAMSTARTER] CAM 1 is Running, active cam 1: CCcam 2.3.0
[CAMSTARTER] Cam is running, exit camstarter
playing 1:0:19:EF10:421:1:C00000:0:0:0:
getResolvedKey config.usage.remote_fallback failed !! (Typo??)
[Picload] setPara max-X=220 max-Y=80 aspect_ratio=0.000000 cache=1 resize=1 bg=#FF000000
[Picload] decode picture... /media/hdd/picon/1_0_19_EF10_421_1_C00000_0_0_0.png
[EPGC] 7384 events read from /media/hdd/epg.dat
[SCREENNAME] InfoBar
setPixmapNum(0) failed! defined pixmaps: []
setPixmapNum(0) failed! defined pixmaps: []
RemovePopup, id = ZapError
allocate channel.. 0421:0001
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10832250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1082 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:EF10:421:1:C00000:0:0:0:
allocate demux
cidr invalid: 64
poll: unhandled POLLERR/HUP/NVAL for fd 31(16)
[SwapManager] Found a swapfile on /media/hdd/swapfile
[SwapManager] Swapfile is already active on /media/hdd/swapfile
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
poll: unhandled POLLERR/HUP/NVAL for fd 41(16)
[VLC] Checking for buildin servicets ... no
[VLC] Checking for existing and usable servicets.so ... No module named servicets
[VLC] Checking for usable gstreamer service ... yes
[EMCMS] python-mutagen is not available: No module named mutagen.mp3
EMC: Next trashcan cleanup in 160 minutes
[LED-GIGA] delay init on boot
[LED-GIGA] initVFD box = gb800ue
[SEC] set static current limiting
0.0.0.0
192.168
SerienRecorder plugin not found
ignore unsupported 32bpp -> 16bpp alphablend!
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 31(16)
job Components.Task.Job name=Prüfe EPG-Zwischenspeicher #tasks=2 completed with [] in None
[EPGC] Saving EPGCache.
[EPGC] store epg to realpath '/media/hdd/epg.dat'
[EPGC] 7372 events written to /media/hdd/epg.dat
[SEC] invalidate current switch params
job Components.Task.Job name=Prüfe EPG-Zwischenspeicher #tasks=2 completed with [] in None
[SEC] setVoltage 2
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
[EPGC] Saving EPGCache.
[EPGC] store epg to realpath '/media/hdd/epg.dat'
[EPGC] 7372 events written to /media/hdd/epg.dat
EMC delPathFromCache /media/hdd/movie/trashcan
EMC: [EMCMS] trashcan cleanup: nothing to delete...
[SEC] set dynamic current limiting
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 1f, inversion off, m_tuning 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x14e3130 running
[eEPGCache] channel 0x14e3130 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020
allocate demux
[EPGC] next update in 2 sec
decoder state: play, vpid=255, apid=259
DMX_SET_PES_FILTER(0xff) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x103) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0xff) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x20) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles page ffffffffffffffff (und)
setPixmapNum(0) failed! defined pixmaps: []
[Volume Adjust] Update Info
[Volume Adjust] Volume = 45
[Volume Adjust] load xml...
[Volume Adjust] New Channel
[Volume Adjust] oldvol = 0
[eDVBCAService] new service 1:0:19:EF10:421:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF10:421:1:C00000:0:0:0:
RemovePopup, id = ZapError
job Components.Task.Job name=Prüfe EPG-Zwischenspeicher #tasks=2 completed with [] in None
[EPGC] Refreshing EPGCache.
[EPGC] 7372 events read from /media/hdd/epg.dat
[Dish] tuning failed
[eDVBLocalTimerHandler] dont have correction.. set Transponder Diff
[eDVBLocalTimerHandler] set RTC Time
[eDVBLocalTimerHandler] Boxtype = [gb800ue]
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 22:20:43
[eDVBLocalTimerHandler] m_time_difference is -2
[eDVBLocalTimerHandler] set Linux Time
[EPGRefresh] Timer added <EPGRefreshTimerEntry (Mi 12 Aug 2015 22:21:13 CEST, 0, <bound method EPGRefresh.prepareRefresh of <Plugins.Extensions.EPGRefresh.EPGRefresh.EPGRefresh instance at 0x74238198>>)>
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
PATready
use pmtpid 0060 for service_id ef10
job Components.Task.Job name=Prüfe EPG-Zwischenspeicher #tasks=2 completed with [] in None
DEBUG VIDEOMODE/ smart1080p enabled
DEBUG VIDEOMODE/ no path or no service reference, presumably live TV
[VideoMode] setMode - port: HDMI, mode: 1080p50 is not available
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: auto
[VideoMode] setting policy2: letterbox
eventNewProgramInfo 0 0
have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020
decoder state: play, vpid=255, apid=259
[Volume Adjust] Update Info
[Volume Adjust] Volume = 45
[Volume Adjust] load xml...
[eDVBCIInterfaces] gotPMT
poll: unhandled POLLERR/HUP/NVAL for fd 60(16)
[EPGC] start caching events(1439410844)
sdt update done!
AITready
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
DEBUG VIDEOMODE/ smart1080p enabled
DEBUG VIDEOMODE/ no path or no service reference, presumably live TV
[VideoMode] setMode - port: HDMI, mode: 1080p50 is not available
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: auto
[VideoMode] setting policy2: letterbox
[EPGC] abort non avail virgin nownext reading
[EPGC] abort non avail virgin schedule reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[EPGC] nownext finished(1439410851)
[EPGC] schedule finished(1439410853)
[EPGC] schedule other finished(1439410860)
[EPGC] stop caching events(1439410860)
[EPGC] next update in 60 min
[EPGRefresh] In Timespan, will check if we're in Standby and have no Recordings running next
[EPGRefresh] About to start refreshing EPG
Traceback (most recent call last):
File "/usr/lib/enigma2/python/timer.py", line 239, in calcNextActivation
File "/usr/lib/enigma2/python/timer.py", line 310, in processActivation
File "/usr/lib/enigma2/python/timer.py", line 288, in doActivate
File "/usr/lib/enigma2/python/Plugins/Extensions/EPGRefresh/EPGRefreshTimer.py", line 75, in activate
File "/usr/lib/enigma2/python/Plugins/Extensions/EPGRefresh/EPGRefresh.py", line 309, in prepareRefresh
File "/usr/lib/enigma2/python/Plugins/Extensions/EPGRefresh/EPGRefresh.py", line 274, in generateServicelist
File "/usr/lib/enigma2/python/Plugins/Extensions/EPGRefresh/EPGRefresh.py", line 215, in addServices
AttributeError: 'NoneType' object has no attribute 'valid'
(PyObject_CallObject(<bound method EPGRefreshTimer.calcNextActivation of <Plugins.Extensions.EPGRefresh.EPGRefreshTimer.EPGRefreshTimer instance at 0x742298f0>>,()) failed)
]]>
</enigma2crashlog>
</crashlogs>
</openATV>

 

[Megabit]

AW: EPG / Telextext / Sendung

Du hast da im Image ein Problem....

1. Stick abziehen und neu Formatieren in Fat 32, aber hiermit,

Sie müssen registriert sein, um Links zu sehen.

2. Settings mit Dreamedit sichern.
3. CCcam.cfg. sichern.
4. Jetzt machst du alle Stecker, Kabel etc. von der Box ab, außer das zum TV.
5. Jetzt flasht du mal dies Image hier, klick,
6. Nun lädst du dir deine Settings wieder zurück.
7. Jetzt kommt der Zusatzfeed für das Cam. (Zum Download von CCcam 2.3.0)
8. Wenn dies alles Installiert ist, lässt du die Box mal etwa 1 std. Normal laufen um zu sehen, ob sie flüssig läuft.
9. Danach kannst du jetzt den Flashexpander vom Feed ziehen und einrichten.
10. Wenn dies erledigt, kommen nun die Picons, Skin usw.
11. Jetzt nochmals GUI neustarten und den EPG Refresh downloaden und einrichten.

Wenn alles richtig gemacht wurde, sollte die Box Astrein laufen.

 

[McMighty]

AW: EPG / Telextext / Sendung

Und auch mal ein anderes Image testen. Statt openATV mal OpenMips zB. Die Feeds sind ja andere. Bei dem einen mag das Plugin fehlerhaft sein, auf dem anderen nicht