Easymouse + HD02 = Resets

[ako]

Hallo Leute.

Hab eine Easymouse mit einer HD02.
Hab mit der Combo das Problem, dass sich das Ganze alle paar Minuten resettet. So siehts in den Logs aus:

Spoiler

ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
[nagra] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
[nagra] Error getting card status.

[nagra] card ejected
20014/02/12 18:41:08 1192ED8 r hd02_easymouse [mouse] card detected
2014/02/12 18:41:09 1192ED8 r hd02_easymouse [mouse] ATR: Interessiert doch keinen
2014/02/12 18:41:09 1192ED8 r hd02_easymouse [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/02/12 18:41:09 1192ED8 r hd02_easymouse [mouse] Setting baudrate to 111600 bps
2014/02/12 18:41:09 1192ED8 r hd02_easymouse [mouse] Calculated work ETU is 5.33 us reader mhz = 600
2014/02/12 18:41:09 1192ED8 r hd02_easymouse [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2014/02/12 18:41:09 1192ED8 r hd02_easymouse [mouse] Card responded ok for ifsd request of 160
2014/02/12 18:41:10 1192ED8 r hd02_easymouse [mouse] detect native nagra card
2014/02/12 18:41:10 1192ED8 r hd02_easymouse [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min)
2014/02/12 18:41:11 1192ED8 r hd02_easymouse [mouse] T1 Resync command error, trying to reactivate!
02_easymouse [mouse] T1 Resync command error, trying to reactivate!
2014/02/12 18:41:12 116E1C8 c tamer (1702&000000/0000/00DF/93:00000000000000000000000000000000): sleeping (1 ms) - Sky Bundesliga 1
2014/02/12 18:41:13 1192ED8 r hd02_easymouse [mouse] ATR: Interessiert doch keinen
2014/02/12 18:41:13 1192ED8 r hd02_easymouse [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/02/12 18:41:13 1192ED8 r hd02_easymouse [mouse] Setting baudrate to 111600 bps
2014/02/12 18:41:13 1192ED8 r hd02_easymouse [mouse] Calculated work ETU is 5.33 us reader mhz = 600
2014/02/12 18:41:13 1192ED8 r hd02_easymouse [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2014/02/12 18:41:13 1192ED8 r hd02_easymouse [mouse] Card responded ok for ifsd request of 160
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [mouse] found card system nagra
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] ROM: Kennt
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] REV: Ihr doch
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] SER: ############
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] CAID: 1843
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] Prv.ID: Alle
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] Prv.ID: !
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] IRD ID: ############
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] active to: 2014/04/04 12:59
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] -----------------------------------------
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] |id |tier |valid from |valid to |
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] +----+--------+------------+------------+
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] |8011|0066 |2013/02/03 |2014/02/04 |
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] |8011|0BEA |2014/02/10 |2015/03/18 |
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] -----------------------------------------
2014/02/12 18:41:14 1192ED8 r hd02_easymouse [nagra] ready for requests

Das Ganze läuft an einem Raspberry mit aktivem USB HUB. Die Easymouse lief bis vor einiger Zeit zusammen mit einer I12 problemlos und wurde grundlos von einem Smargo ersetzt. Mit der HD02 hab ich dieses Problem.

Irgendwer einen Tipp? Ich wäre sehr dankbar!