AW: Dreambox 800 als Server und Pc als Client ?
Hi Phantom,
also auf der Dreambox ist cccam 2.0.11 mit newcs 1.6.2 diese habe ich so eingestellt für homecs:
CCCam : F: Kinderzimmer pass1 200 { 0:0:2 }
C: 192.168.1.4 12000
Newcs: wurde von mir nicht verändert :
Lower Cardreader</NAME>
<TYPE>sci</TYPE>
<MHZ>600</MHZ>
<NODE>/dev/sci0</NODE>
odd</PARITY></P><RESET>normal</RESET>
<EXPORT>Yes</EXPORT>
<ENABLED>Yes</ENABLED>
<BLOCKSA>No</BLOCKSA>
<BLOCKUA>No</BLOCKUA>
<BLOCKGA>No</BLOCKGA>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<IRDETO-CAMKEY>0000000000000000</IRDETO-CAMKEY>
<IRDETO-CAMKEY-DATA>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</IRDETO-CAMKEY-DATA>
<CRYPTO-SPECIAL>No</CRYPTO-SPECIAL>
<IPK>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</IPK>
<UCPK>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</UCPK>
No</PTSHANDSHAKE></P><CARDDETECT>yes</CARDDETECT>
<NEWCAMD_PORT>34000</NEWCAMD_PORT>
<AUTOSID>Yes</AUTOSID>
<SECA-PPV>no</SECA-PPV>
0000</PINCODE> </P>
round</PRIORITY></P></DEVICE>
<DEVICE>
<NAME>Upper Cardreader</NAME>
<TYPE>sci</TYPE>
<MHZ>358</MHZ>
<NODE>/dev/sci1</NODE>
odd</PARITY></P><RESET>normal</RESET>
<EXPORT>Yes</EXPORT>
<ENABLED>Yes</ENABLED>
<BLOCKSA>No</BLOCKSA>
<BLOCKUA>No</BLOCKUA>
<BLOCKGA>No</BLOCKGA>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<IRDETO-CAMKEY>0000000000000000</IRDETO-CAMKEY>
<IRDETO-CAMKEY-DATA>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</IRDETO-CAMKEY-DATA>
<CRYPTO-SPECIAL>No</CRYPTO-SPECIAL>
<IPK>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</IPK>
<UCPK>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</UCPK>
No</PTSHANDSHAKE></P><CARDDETECT>yes</CARDDETECT>
<NEWCAMD_PORT>34001</NEWCAMD_PORT>
<AUTOSID>Yes</AUTOSID>
<SECA-PPV>no</SECA-PPV>
0000</PINCODE> </P>
round</PRIORITY></P></DEVICE>
</READERS>
<RADEGASTSERVER>
<!-- valid value for enable are:
Yes, No - Enable or Disable radegast server. -->
<ENABLED>No</ENABLED>
<!-- valid value for port are:
0,65535 - Which port to listen for incomming connections. -->
10001</PORT></P><ALLOW>
<!-- valid value for hostname are:
all, IP-address or DNS-name. -->
<HOSTNAME>localhost</HOSTNAME>
</ALLOW>
</RADEGASTSERVER>
<CACHE>
<!-- valid value for emm are:
0-255 - Number of EMM's to cache. -->
<EMM>20</EMM>
<!-- valid value for ecm are:
0-255 - Number of ECM's to cache.
-1 - Dynamic ECM Cache. -->
<ECM>-1</ECM>
</CACHE>
<HTTPD>
<SERVER><!-- Port to accept connections on -->
8080</PORT></P><ENABLED>yes</ENABLED>
</SERVER>
<USER>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<NAME>newcs</NAME>
<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->
newcs</PASSWORD></P>
<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<ACCESSLEVEL>admin</ACCESSLEVEL>
</USER>
</HTTPD>
<DEBUG>
<!-- valid value for password:
Max 25 characters and minimum 8, this is case-sensitive. -->
NewCSpwd</PASSWORD></P><!-- valid value for mode:
simple, advanced - Set TCP-Console to advanced mode to get access to
potentially dangerous features.-->
<MODE>simple</MODE>
<!-- valid value for level are:
normal, verbose, spam - How extensive debug should be. -->
<LEVEL>normal</LEVEL>
<!-- valid value for type are:
Init, general, ecm, emm, net, all - Section of debug that should be displayed. -->
<TYPE>general</TYPE>
<!-- valid value for output are:
Console, udp, tcp, file, all - Where to show debug. -->
<OUTPUT>console,tcp</OUTPUT>
<!-- console_options are so you can set own loglevel/type for console-logger:
Should hold level and type-tags like above. -->
<CONSOLE_OPTIONS>normal,init</CONSOLE_OPTIONS>
<!-- valid value for logfile are:
Path and filename - Where to write debug logs if file or all is chosed in output. -->
<LOGFILE>/hdd/newcs.txt</LOGFILE>
<!-- file_options are so you can set own loglevel/type for file-logger:
Should hold level and type-tags like above. -->
<FILE_OPTIONS>spam,all</FILE_OPTIONS>
<!-- valid value for udp_host are:
IP-address or DNS-name - Where to send debug if udp or all is chosed in output. -->
<UDP_HOST>192.168.1.10</UDP_HOST>
<!-- valid value for udp_port are:
0,65535 - Which port to send the udp packets. -->
<UDP_PORT>1000</UDP_PORT>
<!-- udp_options are so you can set own loglevel/type for udp-logger:
Should hold level and type-tags like above. -->
<UDP_OPTIONS>normal,init</UDP_OPTIONS>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<TCP_PORT>1001</TCP_PORT>
<!-- tcp_options are so you can set own loglevel/type for tcp-logger:
Should hold level and type-tags like above. -->
<TCP_OPTIONS>normal,init</TCP_OPTIONS>
</DEBUG>
<NEWCAMDSERVER>
<!-- valid value for enabled are:
Yes, No - Enable or Disable newcamd server. -->
<ENABLED>Yes</ENABLED>
<!-- valid value for name are:
Any name - Used to identify server to remote clients,
if the remote client isnt newcamd, this field have no purpouse. -->
<NAME>newcs</NAME>
<!-- valid value for deskey are:
any 14x2 numbers - Used to encrypt the communication between
the client and the server. -->
<DESKEY>01 02 03 04 05 06 07 08 09 10 11 12 13 14</DESKEY>
<!-- Notes about users:
The first user doesnt have au without beeing it set to on (unlike newcamd cardserver).
You can add as many user-sections as you want, just put them under eachother. -->
<USER>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<NAME>dummy</NAME>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
dummy</PASSWORD></P><!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
21000</PORT></P><!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<AU>on</AU>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<SIDOVERRIDE>off</SIDOVERRIDE>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<SPIDER>No</SPIDER>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<RATE>2</RATE>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<CARDLEVEL>1</CARDLEVEL>
</USER>
<USER>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<NAME>mpcs</NAME>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
dummy</PASSWORD></P><!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
21000</PORT></P><!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<AU>on</AU>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<SIDOVERRIDE>off</SIDOVERRIDE>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<SPIDER>No</SPIDER>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<RATE>2</RATE>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<CARDLEVEL>1</CARDLEVEL>
</USER>
</NEWCAMDSERVER>
<CHAMELEON2>
<SERVER>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
1234</PORT></P><!-- enable or disable the server, valid values are yes/no -->
<ENABLED>No</ENABLED>
</SERVER>
<!-- Connect to remote Chamelon server with the below credentials --></P><HOSTNAME>localhost</HOSTNAME>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
1234</PORT></P><!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<NAME>myname</NAME>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
mypassword</PASSWORD></P><!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<REALM>myShares</REALM>
</PEER>
<USER>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<NAME>myname</NAME>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
mypassword</PASSWORD></P><!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<REALM>myShares</REALM>
</USER>
</CHAMELEON2>
wie werden die mit einander verbunden ?
