Ciao,
Voglio usare la carta tiv*sat e una carta c*nax nella mia Dre*mbox 7000.
Quando lancio osc*m, le carte non si inizializzano bene 4 volte su 5. Però, se scasso una delle due carte da osc*m server, la carta rimasta definita, si avvia bene tutte le volte. Dunque se per esempio scasso la carta c*nax di osc*m.server, la scheda tiv*sat parte sempre bene.
Ne ho provate già tante, ma ancora non sono riuscito a farle avviare bene insieme su tutti i lanci.
Sto usando osc*m 8638.
osc*m.conf:
osc*m.server:
osc*m.user:
Log di un avvio fallito:
Esiste per caso un modo per avviare le carte una dopo l'altra invece di farle partire insieme?
Grazie in anticipo per ogni aiuto.
Voglio usare la carta tiv*sat e una carta c*nax nella mia Dre*mbox 7000.
Quando lancio osc*m, le carte non si inizializzano bene 4 volte su 5. Però, se scasso una delle due carte da osc*m server, la carta rimasta definita, si avvia bene tutte le volte. Dunque se per esempio scasso la carta c*nax di osc*m.server, la scheda tiv*sat parte sempre bene.
Ne ho provate già tante, ma ancora non sono riuscito a farle avviare bene insieme su tutti i lanci.
Sto usando osc*m 8638.
osc*m.conf:
[global]
logfile = stdout
fallbacktimeout = 2000
failbantime = 5
failbancount = 5
#netprio = 1
nice = -10
maxlogsize = 1000
preferlocalcards = 1
#readerrestartseconds = 7
block_same_ip = 0
block_same_name = 0
#lb_mode = 1
#lb_savepath = /var/log/lb.log
#lb_reopen_mode = 1
#fallbacktimeout = 2000
#failbantime = 5
#cachedelay = 120
#maxlogsize = 512
#saveinithistory = 1
WaitForCards = 1
[newcamd]
port = 33335@183D:005411,000000;33336@0B00:000000
key = 0102030405060708091011121314
logfile = stdout
fallbacktimeout = 2000
failbantime = 5
failbancount = 5
#netprio = 1
nice = -10
maxlogsize = 1000
preferlocalcards = 1
#readerrestartseconds = 7
block_same_ip = 0
block_same_name = 0
#lb_mode = 1
#lb_savepath = /var/log/lb.log
#lb_reopen_mode = 1
#fallbacktimeout = 2000
#failbantime = 5
#cachedelay = 120
#maxlogsize = 512
#saveinithistory = 1
WaitForCards = 1
[newcamd]
port = 33335@183D:005411,000000;33336@0B00:000000
key = 0102030405060708091011121314
osc*m.server:
[reader]
label = tivusatreader
detect = cd
protocol = internal
device = /dev/sci0
caid = 183D
ident = 183D:000000,005411
rsakey = nnnnnnnn
mhz = 500
cardmhz = 500
group = 1
emmcache = 1,3,6
#nagra_read = 2
auprovid = 005411
#lb_weight = 500
#ecmwhitelist = 183D@005411:91
#ecmheaderwhitelist = 80308ED387,81308ED387
[reader]
label = imaginreader
detect = cd
protocol = internal
device = /dev/sci1
caid = 0B00
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,6
#lb_weight = 100
label = tivusatreader
detect = cd
protocol = internal
device = /dev/sci0
caid = 183D
ident = 183D:000000,005411
rsakey = nnnnnnnn
mhz = 500
cardmhz = 500
group = 1
emmcache = 1,3,6
#nagra_read = 2
auprovid = 005411
#lb_weight = 500
#ecmwhitelist = 183D@005411:91
#ecmheaderwhitelist = 80308ED387,81308ED387
[reader]
label = imaginreader
detect = cd
protocol = internal
device = /dev/sci1
caid = 0B00
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,6
#lb_weight = 100
osc*m.user:
[account]
user = nnnnn
pwd = nnnnn
disabled = 0
au = tivusatreader,imaginreader
Group = 1,2
user = nnnnn
pwd = nnnnn
disabled = 0
au = tivusatreader,imaginreader
Group = 1,2
Log di un avvio fallito:
$ /var/bin/oscam -c /var/tuxbox/config
17:25:58 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8638 (powerpc-linux)
17:25:58 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 13905
17:25:58 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
17:25:58 0 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
17:25:58 0 s signal handling initialized
17:25:58 0 s newcamd: initialized (fd=3, port=33335)
17:25:58 0 s -> CAID: 183D PROVID: 005411, 000000
17:25:58 0 s newcamd: initialized (fd=4, port=33336)
17:25:58 0 s -> CAID: 0B00 PROVID: 000000
17:25:58 0 s tivusatreader [internal] creating thread for device /dev/sci0
17:25:58 0 s imaginreader [internal] creating thread for device /dev/sci1
17:25:58 0 s loadbalancer: can't read from file /tmp/.oscam/stat
17:25:58 0 s waiting for local card init
17:25:58 100FC6A0 h webif: decompressed 52609 bytes back into 152072 bytes
17:25:58 100FC6A0 h HTTP Server listening on port 51111
17:25:58 100F0F88 r tivusatreader [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=500)
17:25:58 100F2C00 r imaginreader [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
17:25:59 100F0F88 r tivusatreader [internal] card detected
17:25:59 100F2C00 r imaginreader [internal] card detected
17:26:00 100F2C00 r imaginreader [internal] ATR:
17:26:00 100F2C00 r imaginreader [internal] Init card protocol T0, FI=9, F=512, D=8, N=0
17:26:00 100F2C00 r imaginreader [internal] Calculated work ETU is 12.80 us
17:26:00 100F2C00 r imaginreader [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
17:26:01 100F0F88 r Warning reader tivusatreader: Total ATR characters received is: 14 instead of expected 27
17:26:01 100F0F88 r tivusatreader [internal] ATR:
17:26:01 100F0F88 r tivusatreader [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
17:26:01 100F0F88 r tivusatreader [internal] Calculated work ETU is 6.40 us
17:26:01 100F0F88 r tivusatreader [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
17:26:01 100F2C00 r imaginreader [internal] type: Conax, caid: 0B00, serial: ##########, hex serial: ########, card: v64
17:26:01 100F2C00 r imaginreader [internal] Providers: 1
17:26:01 100F2C00 r imaginreader [internal] Provider: 1 Provider-Id: 000000
17:26:01 100F2C00 r imaginreader [internal] Provider: 1 SharedAddress: 003C5559
17:26:01 100F2C00 r imaginreader [internal] found card system conax
17:26:01 100F2C00 r imaginreader [conax] Package: 1, id:
17:26:01 100F2C00 r imaginreader [conax] Package: 2, id:
17:26:01 100F2C00 r imaginreader [conax] Package: 3, id:
17:26:01 100F2C00 r imaginreader [conax] Package: 4, id:
17:26:01 100F2C00 r imaginreader [conax] ready for requests
17:26:02 100F0F88 r tivusatreader [internal] card system not supported
17:26:02 100F0F88 r tivusatreader [internal] Normal mode failed, reverting to Deprecated Mode
17:26:02 100F0F88 r tivusatreader [internal] ATR:
17:26:02 100F0F88 r tivusatreader [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
17:26:02 100F0F88 r tivusatreader [internal] Calculated work ETU is 74.40 us
17:26:02 100F0F88 r tivusatreader [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
17:26:03 100F0F88 r tivusatreader [internal] detect nagra tiger card
17:26:05 100F0F88 r tivusatreader [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
17:26:06 100F0F88 r tivusatreader [internal] T1 Resync command error, trying to reactivate!
17:26:07 100F0F88 r tivusatreader [internal] ATR:
17:26:07 100F0F88 r tivusatreader [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
17:26:07 100F0F88 r tivusatreader [internal] Calculated work ETU is 6.40 us
17:26:07 100F0F88 r tivusatreader [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
17:26:07 100F0F88 r tivusatreader [internal] card system not supported
17:26:07 100F0F88 r tivusatreader [internal] card initializing error
17:26:07 0 s init for all local cards done
17:26:07 0 s anti cascading disabled
17:26:07 10103958 c client connected to 33335 port
17:26:07 10103958 c encrypted newcamd:33335-client 192.168.1.33 granted (dm7kcl, au=on (2 reader))
17:26:07 10103958 c user dm7kcl authenticated successfully (mgcamd)
17:26:07 10103958 c AU disabled for user dm7kcl
17:26:07 10103958 c SID list will not be send to mgcamd client.
17:26:12 100FC6A0 h HTTP Server stopped
17:26:12 0 s killing client dm7kcl
17:26:12 0 s tivusatreader [internal] Killing reader
17:26:12 0 s imaginreader [conax] Killing reader
17:26:12 0 s userdb 5 accounts freed
17:26:12 0 s readerdb 2 readers freed
17:26:12 0 s cardserver down
17:25:58 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8638 (powerpc-linux)
17:25:58 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 13905
17:25:58 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
17:25:58 0 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
17:25:58 0 s signal handling initialized
17:25:58 0 s newcamd: initialized (fd=3, port=33335)
17:25:58 0 s -> CAID: 183D PROVID: 005411, 000000
17:25:58 0 s newcamd: initialized (fd=4, port=33336)
17:25:58 0 s -> CAID: 0B00 PROVID: 000000
17:25:58 0 s tivusatreader [internal] creating thread for device /dev/sci0
17:25:58 0 s imaginreader [internal] creating thread for device /dev/sci1
17:25:58 0 s loadbalancer: can't read from file /tmp/.oscam/stat
17:25:58 0 s waiting for local card init
17:25:58 100FC6A0 h webif: decompressed 52609 bytes back into 152072 bytes
17:25:58 100FC6A0 h HTTP Server listening on port 51111
17:25:58 100F0F88 r tivusatreader [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=500)
17:25:58 100F2C00 r imaginreader [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
17:25:59 100F0F88 r tivusatreader [internal] card detected
17:25:59 100F2C00 r imaginreader [internal] card detected
17:26:00 100F2C00 r imaginreader [internal] ATR:
17:26:00 100F2C00 r imaginreader [internal] Init card protocol T0, FI=9, F=512, D=8, N=0
17:26:00 100F2C00 r imaginreader [internal] Calculated work ETU is 12.80 us
17:26:00 100F2C00 r imaginreader [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
17:26:01 100F0F88 r Warning reader tivusatreader: Total ATR characters received is: 14 instead of expected 27
17:26:01 100F0F88 r tivusatreader [internal] ATR:
17:26:01 100F0F88 r tivusatreader [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
17:26:01 100F0F88 r tivusatreader [internal] Calculated work ETU is 6.40 us
17:26:01 100F0F88 r tivusatreader [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
17:26:01 100F2C00 r imaginreader [internal] type: Conax, caid: 0B00, serial: ##########, hex serial: ########, card: v64
17:26:01 100F2C00 r imaginreader [internal] Providers: 1
17:26:01 100F2C00 r imaginreader [internal] Provider: 1 Provider-Id: 000000
17:26:01 100F2C00 r imaginreader [internal] Provider: 1 SharedAddress: 003C5559
17:26:01 100F2C00 r imaginreader [internal] found card system conax
17:26:01 100F2C00 r imaginreader [conax] Package: 1, id:
17:26:01 100F2C00 r imaginreader [conax] Package: 2, id:
17:26:01 100F2C00 r imaginreader [conax] Package: 3, id:
17:26:01 100F2C00 r imaginreader [conax] Package: 4, id:
17:26:01 100F2C00 r imaginreader [conax] ready for requests
17:26:02 100F0F88 r tivusatreader [internal] card system not supported
17:26:02 100F0F88 r tivusatreader [internal] Normal mode failed, reverting to Deprecated Mode
17:26:02 100F0F88 r tivusatreader [internal] ATR:
17:26:02 100F0F88 r tivusatreader [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
17:26:02 100F0F88 r tivusatreader [internal] Calculated work ETU is 74.40 us
17:26:02 100F0F88 r tivusatreader [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
17:26:03 100F0F88 r tivusatreader [internal] detect nagra tiger card
17:26:05 100F0F88 r tivusatreader [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
17:26:06 100F0F88 r tivusatreader [internal] T1 Resync command error, trying to reactivate!
17:26:07 100F0F88 r tivusatreader [internal] ATR:
17:26:07 100F0F88 r tivusatreader [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
17:26:07 100F0F88 r tivusatreader [internal] Calculated work ETU is 6.40 us
17:26:07 100F0F88 r tivusatreader [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
17:26:07 100F0F88 r tivusatreader [internal] card system not supported
17:26:07 100F0F88 r tivusatreader [internal] card initializing error
17:26:07 0 s init for all local cards done
17:26:07 0 s anti cascading disabled
17:26:07 10103958 c client connected to 33335 port
17:26:07 10103958 c encrypted newcamd:33335-client 192.168.1.33 granted (dm7kcl, au=on (2 reader))
17:26:07 10103958 c user dm7kcl authenticated successfully (mgcamd)
17:26:07 10103958 c AU disabled for user dm7kcl
17:26:07 10103958 c SID list will not be send to mgcamd client.
17:26:12 100FC6A0 h HTTP Server stopped
17:26:12 0 s killing client dm7kcl
17:26:12 0 s tivusatreader [internal] Killing reader
17:26:12 0 s imaginreader [conax] Killing reader
17:26:12 0 s userdb 5 accounts freed
17:26:12 0 s readerdb 2 readers freed
17:26:12 0 s cardserver down
Esiste per caso un modo per avviare le carte una dopo l'altra invece di farle partire insieme?
Grazie in anticipo per ogni aiuto.
Zuletzt bearbeitet: