AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/
Danke für die schnellen Antworten @Laila:
Habe jetzt doch ne neue Oscam am laufen (letzte stable OSCam r9836 - hatte vergessen die rechte zu setzen).
hat aber leider nicht viel gebracht,
meine neue oscam.server:
boxkey/rsa sind imo richtig, selbst wenn ncht, müsste ja wenigstens die sky karte gehen oder?
wo ist eigentlich der unterschied zwischen mhz und cardmhz in deeiner config-datei?
- - - - - - - - - -
ok, danke.
Hab die Karten am Receiver umgesteckt, sollte jetzt passen von der Anzeige, ändeert nur nichts am Error der Karten
OSCAM r9836
Danke für die schnellen Antworten @Laila:
Habe jetzt doch ne neue Oscam am laufen (letzte stable OSCam r9836 - hatte vergessen die rechte zu setzen).
hat aber leider nicht viel gebracht,
meine neue oscam.server:
[reader]
label = SkyGermany
enable = 1
protocol = internal
device = /dev/sci0
caid = 1702,1833
services=SkyGermany
boxid = 12345678
detect = CD
mhz = 2700
cardmhz = -1
autospeed = 1
group = 1
emmcache = 1,1,2
[reader]
label = HDPlus
enable = 1
protocol = internal
device = /dev/sci1
rsakey =
boxkey =
caid = 1830
services=HDPlus
detect = CD
mhz = 2700
cardmhz = -1
autospeed = 1
cardmhz = 368
group = 2
emmcache = 1,1,2
label = SkyGermany
enable = 1
protocol = internal
device = /dev/sci0
caid = 1702,1833
services=SkyGermany
boxid = 12345678
detect = CD
mhz = 2700
cardmhz = -1
autospeed = 1
group = 1
emmcache = 1,1,2
[reader]
label = HDPlus
enable = 1
protocol = internal
device = /dev/sci1
rsakey =
boxkey =
caid = 1830
services=HDPlus
detect = CD
mhz = 2700
cardmhz = -1
autospeed = 1
cardmhz = 368
group = 2
emmcache = 1,1,2
boxkey/rsa sind imo richtig, selbst wenn ncht, müsste ja wenigstens die sky karte gehen oder?
wo ist eigentlich der unterschied zwischen mhz und cardmhz in deeiner config-datei?
- - - - - - - - - -
2014/09/04 14:04:28 B087B0 r HDPlus [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D = S02 Karte
ok, danke.
Hab die Karten am Receiver umgesteckt, sollte jetzt passen von der Anzeige, ändeert nur nichts am Error der Karten

2014/09/04 15:06:48 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/09/04 15:06:48 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/04 15:06:48 0 s signal handling initialized
2014/09/04 15:06:48 0 s 157 service-id's loaded in 4 ms
2014/09/04 15:06:48 0 s 4 provid's loaded
2014/09/04 15:06:48 0 s cccam: initialized (fd=6, port=64000, prio=1)
2014/09/04 15:06:48 0 s SkyGermany [internal] creating thread for device /dev/sci0
2014/09/04 15:06:48 0 s HDPlus [internal] creating thread for device /dev/sci1
2014/09/04 15:06:48 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/04 15:06:48 0 s waiting for local card init
2014/09/04 15:06:48 9EE4C0 r HDPlus [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=2700, cardmhz=368)
2014/09/04 15:06:48 9E8B80 r SkyGermany [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=2700, cardmhz=-1)
2014/09/04 15:06:48 9F02F0 h webif: decompressed 154648 bytes back into 365608 bytes
2014/09/04 15:06:48 9F02F0 h HTTP Server running. ip=0.0.0.0 port=3001
2014/09/04 15:06:49 9E8B80 r SkyGermany [internal] card detected
2014/09/04 15:06:49 9EE4C0 r HDPlus [internal] card detected
2014/09/04 15:06:51 9EE4C0 r HDPlus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/04 15:06:51 9EE4C0 r HDPlus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/04 15:06:51 9EE4C0 r HDPlus [internal] Calculated work ETU is 1.19 us reader mhz = 2700
2014/09/04 15:06:51 9EE4C0 r HDPlus [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:06:51 9EE4C0 r HDPlus [internal] Warning: Card returned error on setting ifsd value to 251
2014/09/04 15:06:52 9E8B80 r SkyGermany [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/09/04 15:06:52 9E8B80 r SkyGermany [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/09/04 15:06:52 9E8B80 r SkyGermany [internal] Calculated work ETU is 20.67 us reader mhz = 2700
2014/09/04 15:06:52 9E8B80 r SkyGermany [internal] ATR Fsmax is 6 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:06:52 9EE4C0 r HDPlus [internal] detect native nagra card
2014/09/04 15:06:52 9EE4C0 r HDPlus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/04 15:06:53 9EE4C0 r HDPlus [internal] T1 Resync command error, trying to reactivate!
2014/09/04 15:06:53 9E8B80 r SkyGermany [internal] detect irdeto tunneled nagra card
2014/09/04 15:06:53 9E8B80 r SkyGermany [internal] no rsa key configured -> using irdeto mode
2014/09/04 15:06:53 9E8B80 r SkyGermany [internal] detect irdeto card
2014/09/04 15:06:54 9EE4C0 r HDPlus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/04 15:06:54 9EE4C0 r HDPlus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/04 15:06:54 9EE4C0 r HDPlus [internal] Calculated work ETU is 1.19 us reader mhz = 2700
2014/09/04 15:06:54 9EE4C0 r HDPlus [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:06:54 9EE4C0 r HDPlus [internal] Warning: Card returned error on setting ifsd value to 251
2014/09/04 15:06:55 9EE4C0 r HDPlus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/04 15:06:55 9EE4C0 r HDPlus [internal] T1 Resync command error, trying to reactivate!
2014/09/04 15:06:55 9E8B80 r SkyGermany [internal] card system not supported
2014/09/04 15:06:55 9E8B80 r SkyGermany [internal] Normal mode failed, reverting to Deprecated Mode
2014/09/04 15:06:56 9EE4C0 r HDPlus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/04 15:06:56 9EE4C0 r HDPlus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/04 15:06:56 9EE4C0 r HDPlus [internal] Calculated work ETU is 1.19 us reader mhz = 2700
2014/09/04 15:06:57 9EE4C0 r HDPlus [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:06:57 9EE4C0 r HDPlus [internal] Warning: Card returned error on setting ifsd value to 251
2014/09/04 15:06:57 9EE4C0 r HDPlus [internal] card system not supported
2014/09/04 15:06:57 9EE4C0 r HDPlus [internal] Normal mode failed, reverting to Deprecated Mode
2014/09/04 15:06:58 9E8B80 r SkyGermany [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/09/04 15:06:58 9E8B80 r SkyGermany [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/09/04 15:06:58 9E8B80 r SkyGermany [internal] Calculated work ETU is 13.78 us reader mhz = 2700
2014/09/04 15:06:58 9E8B80 r SkyGermany [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:06:58 9EE4C0 r HDPlus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/04 15:06:58 9EE4C0 r HDPlus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/04 15:06:58 9EE4C0 r HDPlus [internal] Calculated work ETU is 13.78 us reader mhz = 2700
2014/09/04 15:06:58 9EE4C0 r HDPlus [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:06:59 9EE4C0 r HDPlus [internal] Warning: Card returned error on setting ifsd value to 251
2014/09/04 15:06:59 9E8B80 r SkyGermany [internal] detect irdeto tunneled nagra card
2014/09/04 15:06:59 9E8B80 r SkyGermany [internal] no rsa key configured -> using irdeto mode
2014/09/04 15:06:59 9E8B80 r SkyGermany [internal] detect irdeto card
2014/09/04 15:07:00 9EE4C0 r HDPlus [internal] detect native nagra card
2014/09/04 15:07:00 9EE4C0 r HDPlus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/04 15:07:00 9EE4C0 r HDPlus [internal] T1 Resync command error, trying to reactivate!
2014/09/04 15:07:01 9E8B80 r SkyGermany [internal] card system not supported
2014/09/04 15:07:01 9E8B80 r SkyGermany [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/04 15:07:01 9E8B80 r SkyGermany [internal] card initializing error
2014/09/04 15:07:02 9EE4C0 r HDPlus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/04 15:07:02 9EE4C0 r HDPlus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/04 15:07:02 9EE4C0 r HDPlus [internal] Calculated work ETU is 1.19 us reader mhz = 2700
2014/09/04 15:07:02 9EE4C0 r HDPlus [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:07:02 9EE4C0 r HDPlus [internal] Warning: Card returned error on setting ifsd value to 251
2014/09/04 15:07:02 9EE4C0 r HDPlus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/04 15:07:02 9EE4C0 r HDPlus [internal] T1 Resync command error, trying to reactivate!
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] Calculated work ETU is 1.19 us reader mhz = 2700
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] Warning: Card returned error on setting ifsd value to 251
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] card system not supported
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] card initializing error
2014/09/04 15:07:05 0 s init for all local cards done
2014/09/04 15:07:05 0 s anti cascading disabled
2014/09/04 15:07:05 7750BB88 c plain dvbapi-client granted (local, au=auto (2 reader))
2014/09/04 15:07:05 7750BB88 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/09/04 15:07:06 7750BB88 c [ADD PID 0] CAID: 1833 ECM_PID: 18B6 PROVID: 000000
2014/09/04 15:07:06 7750BB88 c [ADD PID 1] CAID: 09C4 ECM_PID: 1BB6 PROVID: 000000
2014/09/04 15:07:06 7750BB88 c [ADD PID 2] CAID: 09AF ECM_PID: 1FB6 PROVID: 000000
2014/09/04 15:07:06 7750BB88 c [ADD PID 3] CAID: 098C ECM_PID: 1AB6 PROVID: 000000
2014/09/04 15:07:06 7750BB88 c Found 4 ECMpids and 3 STREAMpids in PMT
2014/09/04 15:07:06 7750BB88 c [DVBAPI] Receiver wants to demux srvid 0083 on adapter 0000 camask 0008 index 0003 pmtpid 0064
2014/09/04 15:07:06 7750BB88 c New program number: 0083 (Sky Cinema HD) [pmt_list_management 3]
2014/09/04 15:07:06 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:06 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:07 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:07 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:07 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:08 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:08 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:08 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:08 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:09 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:09 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:09 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:10 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:10 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:10 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:11 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:11 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:11 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:11 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:06:48 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/04 15:06:48 0 s signal handling initialized
2014/09/04 15:06:48 0 s 157 service-id's loaded in 4 ms
2014/09/04 15:06:48 0 s 4 provid's loaded
2014/09/04 15:06:48 0 s cccam: initialized (fd=6, port=64000, prio=1)
2014/09/04 15:06:48 0 s SkyGermany [internal] creating thread for device /dev/sci0
2014/09/04 15:06:48 0 s HDPlus [internal] creating thread for device /dev/sci1
2014/09/04 15:06:48 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/04 15:06:48 0 s waiting for local card init
2014/09/04 15:06:48 9EE4C0 r HDPlus [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=2700, cardmhz=368)
2014/09/04 15:06:48 9E8B80 r SkyGermany [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=2700, cardmhz=-1)
2014/09/04 15:06:48 9F02F0 h webif: decompressed 154648 bytes back into 365608 bytes
2014/09/04 15:06:48 9F02F0 h HTTP Server running. ip=0.0.0.0 port=3001
2014/09/04 15:06:49 9E8B80 r SkyGermany [internal] card detected
2014/09/04 15:06:49 9EE4C0 r HDPlus [internal] card detected
2014/09/04 15:06:51 9EE4C0 r HDPlus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/04 15:06:51 9EE4C0 r HDPlus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/04 15:06:51 9EE4C0 r HDPlus [internal] Calculated work ETU is 1.19 us reader mhz = 2700
2014/09/04 15:06:51 9EE4C0 r HDPlus [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:06:51 9EE4C0 r HDPlus [internal] Warning: Card returned error on setting ifsd value to 251
2014/09/04 15:06:52 9E8B80 r SkyGermany [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/09/04 15:06:52 9E8B80 r SkyGermany [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/09/04 15:06:52 9E8B80 r SkyGermany [internal] Calculated work ETU is 20.67 us reader mhz = 2700
2014/09/04 15:06:52 9E8B80 r SkyGermany [internal] ATR Fsmax is 6 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:06:52 9EE4C0 r HDPlus [internal] detect native nagra card
2014/09/04 15:06:52 9EE4C0 r HDPlus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/04 15:06:53 9EE4C0 r HDPlus [internal] T1 Resync command error, trying to reactivate!
2014/09/04 15:06:53 9E8B80 r SkyGermany [internal] detect irdeto tunneled nagra card
2014/09/04 15:06:53 9E8B80 r SkyGermany [internal] no rsa key configured -> using irdeto mode
2014/09/04 15:06:53 9E8B80 r SkyGermany [internal] detect irdeto card
2014/09/04 15:06:54 9EE4C0 r HDPlus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/04 15:06:54 9EE4C0 r HDPlus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/04 15:06:54 9EE4C0 r HDPlus [internal] Calculated work ETU is 1.19 us reader mhz = 2700
2014/09/04 15:06:54 9EE4C0 r HDPlus [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:06:54 9EE4C0 r HDPlus [internal] Warning: Card returned error on setting ifsd value to 251
2014/09/04 15:06:55 9EE4C0 r HDPlus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/04 15:06:55 9EE4C0 r HDPlus [internal] T1 Resync command error, trying to reactivate!
2014/09/04 15:06:55 9E8B80 r SkyGermany [internal] card system not supported
2014/09/04 15:06:55 9E8B80 r SkyGermany [internal] Normal mode failed, reverting to Deprecated Mode
2014/09/04 15:06:56 9EE4C0 r HDPlus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/04 15:06:56 9EE4C0 r HDPlus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/04 15:06:56 9EE4C0 r HDPlus [internal] Calculated work ETU is 1.19 us reader mhz = 2700
2014/09/04 15:06:57 9EE4C0 r HDPlus [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:06:57 9EE4C0 r HDPlus [internal] Warning: Card returned error on setting ifsd value to 251
2014/09/04 15:06:57 9EE4C0 r HDPlus [internal] card system not supported
2014/09/04 15:06:57 9EE4C0 r HDPlus [internal] Normal mode failed, reverting to Deprecated Mode
2014/09/04 15:06:58 9E8B80 r SkyGermany [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/09/04 15:06:58 9E8B80 r SkyGermany [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/09/04 15:06:58 9E8B80 r SkyGermany [internal] Calculated work ETU is 13.78 us reader mhz = 2700
2014/09/04 15:06:58 9E8B80 r SkyGermany [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:06:58 9EE4C0 r HDPlus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/04 15:06:58 9EE4C0 r HDPlus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/04 15:06:58 9EE4C0 r HDPlus [internal] Calculated work ETU is 13.78 us reader mhz = 2700
2014/09/04 15:06:58 9EE4C0 r HDPlus [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:06:59 9EE4C0 r HDPlus [internal] Warning: Card returned error on setting ifsd value to 251
2014/09/04 15:06:59 9E8B80 r SkyGermany [internal] detect irdeto tunneled nagra card
2014/09/04 15:06:59 9E8B80 r SkyGermany [internal] no rsa key configured -> using irdeto mode
2014/09/04 15:06:59 9E8B80 r SkyGermany [internal] detect irdeto card
2014/09/04 15:07:00 9EE4C0 r HDPlus [internal] detect native nagra card
2014/09/04 15:07:00 9EE4C0 r HDPlus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/04 15:07:00 9EE4C0 r HDPlus [internal] T1 Resync command error, trying to reactivate!
2014/09/04 15:07:01 9E8B80 r SkyGermany [internal] card system not supported
2014/09/04 15:07:01 9E8B80 r SkyGermany [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/04 15:07:01 9E8B80 r SkyGermany [internal] card initializing error
2014/09/04 15:07:02 9EE4C0 r HDPlus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/04 15:07:02 9EE4C0 r HDPlus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/04 15:07:02 9EE4C0 r HDPlus [internal] Calculated work ETU is 1.19 us reader mhz = 2700
2014/09/04 15:07:02 9EE4C0 r HDPlus [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:07:02 9EE4C0 r HDPlus [internal] Warning: Card returned error on setting ifsd value to 251
2014/09/04 15:07:02 9EE4C0 r HDPlus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/04 15:07:02 9EE4C0 r HDPlus [internal] T1 Resync command error, trying to reactivate!
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] Calculated work ETU is 1.19 us reader mhz = 2700
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] Warning: Card returned error on setting ifsd value to 251
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] card system not supported
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/04 15:07:04 9EE4C0 r HDPlus [internal] card initializing error
2014/09/04 15:07:05 0 s init for all local cards done
2014/09/04 15:07:05 0 s anti cascading disabled
2014/09/04 15:07:05 7750BB88 c plain dvbapi-client granted (local, au=auto (2 reader))
2014/09/04 15:07:05 7750BB88 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/09/04 15:07:06 7750BB88 c [ADD PID 0] CAID: 1833 ECM_PID: 18B6 PROVID: 000000
2014/09/04 15:07:06 7750BB88 c [ADD PID 1] CAID: 09C4 ECM_PID: 1BB6 PROVID: 000000
2014/09/04 15:07:06 7750BB88 c [ADD PID 2] CAID: 09AF ECM_PID: 1FB6 PROVID: 000000
2014/09/04 15:07:06 7750BB88 c [ADD PID 3] CAID: 098C ECM_PID: 1AB6 PROVID: 000000
2014/09/04 15:07:06 7750BB88 c Found 4 ECMpids and 3 STREAMpids in PMT
2014/09/04 15:07:06 7750BB88 c [DVBAPI] Receiver wants to demux srvid 0083 on adapter 0000 camask 0008 index 0003 pmtpid 0064
2014/09/04 15:07:06 7750BB88 c New program number: 0083 (Sky Cinema HD) [pmt_list_management 3]
2014/09/04 15:07:06 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:06 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:07 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:07 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:07 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:08 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:08 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:08 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:08 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:09 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:09 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:09 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:10 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:10 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:10 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:11 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:11 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/09/04 15:07:11 7750BB88 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/09/04 15:07:11 7750BB88 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
OSCAM r9836