Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/V14

[flexxx]

AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/

ich hab die karte im oberen slot wenn ich also device = /dev/sci0 eintrage zeigt er mir das an:

Spoiler

2013/12/30 18:24:23 5D6118 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:24:24 5D6118 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:24:24 774016E8 r hdplus [internal] T1 Resync command error, trying to reactivate!
2013/12/30 18:24:24 5D6118 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:24:24 5D6118 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:24:25 5D6118 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:24:25 5D6118 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:24:25 774016E8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2013/12/30 18:24:25 774016E8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/30 18:24:25 774016E8 r hdplus [internal] Calculated work ETU is 8.70 us reader mhz = 368
2013/12/30 18:24:25 774016E8 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2013/12/30 18:24:26 5D6118 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:24:26 5D6118 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:24:26 5D6118 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:24:27 5D6118 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:24:27 5D6118 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:24:27 774016E8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 251
2013/12/30 18:24:27 774016E8 r hdplus [internal] card system not supported
2013/12/30 18:24:27 774016E8 r hdplus [internal] Normal mode failed, reverting to Deprecated Mode
2013/12/30 18:24:27 5D6118 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:24:28 5D6118 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:24:28 5D6118 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:24:28 5D6118 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:24:28 5D6118 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:24:28 774016E8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2013/12/30 18:24:28 774016E8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/30 18:24:28 774016E8 r hdplus [internal] Calculated work ETU is 101.09 us reader mhz = 368
2013/12/30 18:24:29 774016E8 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2013/12/30 18:24:29 5D6118 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:24:29 5D6118 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:24:29 5D6118 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:24:30 5D6118 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:24:30 5D6118 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:24:30 774016E8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 251
2013/12/30 18:24:30 5D6118 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:24:30 5C53D0 h Reader hdplus restarted by WebIF from 192.168.0.100

bzw das:

Spoiler

[TABLE="class: status"]
[TR]
[TH="class: statuscol0"]hide[/TH]
[TH="class: statuscol1"]Thread ID[/TH]
[TH="class: statuscol2"]Type[/TH]
[TH="class: statuscol3"]ID[/TH]
[TH="class: statuscol4"]Label[/TH]
[TH="class: statuscol5"]AU[/TH]
[TH="class: statuscol6"]Crypted[/TH]
[TH="class: statuscol7"]Address[/TH]
[TH="class: statuscol8"]Port[/TH]
[TH="class: statuscol9"]Protocol[/TH]
[TH="class: statuscol10"]Login[/TH]
[TH="class: statuscol11"]Online[/TH]
[TH="class: statuscol12"]CAID:SRVID[/TH]
[TH="class: statuscol13"]Current Channel[/TH]
[TH="class: statuscol14"]LB Value/ Reader[/TH]
[TH="class: statuscol15"]Idle[/TH]
[TH="class: statuscol16"]Status[/TH]
[/TR]
[TR="class: s"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]0x5badf0 [/TD]
[TD="class: statuscol2"]s[/TD]
[TD="class: statuscol3"]0[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]server[/TD]
[TD="class: statuscol10"]30.12.13 18:17:17[/TD]
[TD="class: statuscol11"]00:11:28[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:11:28[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR="class: h"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]0x5c53d0 [/TD]
[TD="class: statuscol2"]h[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]http[/TD]
[TD="class: statuscol10"]30.12.13 18:17:17[/TD]
[TD="class: statuscol11"]00:11:28[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:01:29[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Readers 0/1[/TD]
[/TR]
[TR="class: r"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol2"]r[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]hdplus[/TD]
[TD="class: statuscol5"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol6"]OFF[/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]internal[/TD]
[TD="class: statuscol10"][/TD]
[TD="class: statuscol11"][/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol15"]00:04:35[/TD]
[TD="class: statuscol16"]ERROR

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Clients 1/1 (0 with ECM within last 25 seconds)[/TD]
[/TR]
[TR="class: c"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol2"]c[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]local[/TD]
[TD="class: statuscol5"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol6"]OFF[/TD]
[TD="class: statuscol7"]0.0.0.0[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]dvbapi[/TD]
[TD="class: statuscol10"]30.12.13 18:17:49[/TD]
[TD="class: statuscol11"]00:10:56[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:10:56[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[/TABLE]

 

[dodo83]

AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/

lass mal die einträge raus

[COLOR=#333333]mhz = 368[/COLOR]
[COLOR=#333333]cardmhz = 368[/COLOR]
[COLOR=#333333]ident = 1830:000000,003411,008011[/COLOR]

und starte oscam neu

ob bei dir ober dev/sci0 ist oder unten musst du selber herausfinden

am besten ein start log immer mit posten nach der änderung wenn du dir unsicher bist

 

[flexxx]

AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/

so hab sie jetzt rausgenommen, also mit sci0 ists so:

Spoiler

[TABLE="class: status"]
[TR]
[TH="class: statuscol0"]hide[/TH]
[TH="class: statuscol1"]Thread ID[/TH]
[TH="class: statuscol2"]Type[/TH]
[TH="class: statuscol3"]ID[/TH]
[TH="class: statuscol4"]Label[/TH]
[TH="class: statuscol5"]AU[/TH]
[TH="class: statuscol6"]Crypted[/TH]
[TH="class: statuscol7"]Address[/TH]
[TH="class: statuscol8"]Port[/TH]
[TH="class: statuscol9"]Protocol[/TH]
[TH="class: statuscol10"]Login[/TH]
[TH="class: statuscol11"]Online[/TH]
[TH="class: statuscol12"]CAID:SRVID[/TH]
[TH="class: statuscol13"]Current Channel[/TH]
[TH="class: statuscol14"]LB Value/ Reader[/TH]
[TH="class: statuscol15"]Idle[/TH]
[TH="class: statuscol16"]Status[/TH]
[/TR]
[TR="class: s"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]0xb0adf0[/TD]
[TD="class: statuscol2"]s[/TD]
[TD="class: statuscol3"]0[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]server[/TD]
[TD="class: statuscol10"]30.12.13 18:32:38[/TD]
[TD="class: statuscol11"]00:00:49[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:00:49[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR="class: h"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]0xb136c8[/TD]
[TD="class: statuscol2"]h[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]http[/TD]
[TD="class: statuscol10"]30.12.13 18:32:38[/TD]
[TD="class: statuscol11"]00:00:49[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:00:00[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Readers 0/1[/TD]
[/TR]
[TR="class: r"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol2"]r[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]hdplus[/TD]
[TD="class: statuscol5"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol6"]OFF[/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]internal[/TD]
[TD="class: statuscol10"][/TD]
[TD="class: statuscol11"][/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol15"]00:00:49[/TD]
[TD="class: statuscol16"]ERROR

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Clients 1/1 (0 with ECM within last 25 seconds)[/TD]
[/TR]
[TR="class: c"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol2"]c[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]local[/TD]
[TD="class: statuscol5"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol6"]OFF[/TD]
[TD="class: statuscol7"]0.0.0.0[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]dvbapi[/TD]
[TD="class: statuscol10"]30.12.13 18:33:07[/TD]
[TD="class: statuscol11"]00:00:20[/TD]
[TD="class: statuscol12"]none:none[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:00:20[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[/TABLE]
2013/12/30 18:32:49 B212B8 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/12/30 18:32:50 B212B8 r hdplus [internal] T1 Resync command error, trying to reactivate!
2013/12/30 18:32:52 B212B8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2013/12/30 18:32:52 B212B8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/30 18:32:52 B212B8 r hdplus [internal] Calculated work ETU is 6.40 us reader mhz = 500
2013/12/30 18:32:52 B212B8 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/30 18:32:53 B212B8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 251
2013/12/30 18:32:53 B212B8 r hdplus [internal] card system not supported
2013/12/30 18:32:53 B212B8 r hdplus [internal] Normal mode failed, reverting to Deprecated Mode
2013/12/30 18:32:54 B212B8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2013/12/30 18:32:54 B212B8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/30 18:32:54 B212B8 r hdplus [internal] Calculated work ETU is 74.40 us reader mhz = 500
2013/12/30 18:32:54 B212B8 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/30 18:32:56 B212B8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 251
2013/12/30 18:32:57 B212B8 r hdplus [internal] detect native nagra card
2013/12/30 18:32:58 B212B8 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/12/30 18:32:59 B212B8 r hdplus [internal] T1 Resync command error, trying to reactivate!
2013/12/30 18:33:00 B212B8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2013/12/30 18:33:00 B212B8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/30 18:33:00 B212B8 r hdplus [internal] Calculated work ETU is 6.40 us reader mhz = 500
2013/12/30 18:33:01 B212B8 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/30 18:33:02 B212B8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 251
2013/12/30 18:33:03 B212B8 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/12/30 18:33:04 B212B8 r hdplus [internal] T1 Resync command error, trying to reactivate!
2013/12/30 18:33:06 B212B8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2013/12/30 18:33:06 B212B8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/30 18:33:06 B212B8 r hdplus [internal] Calculated work ETU is 6.40 us reader mhz = 500
2013/12/30 18:33:06 B212B8 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/30 18:33:07 B212B8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 251
2013/12/30 18:33:07 B212B8 r hdplus [internal] card system not supported
2013/12/30 18:33:07 B212B8 r hdplus [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2013/12/30 18:33:07 B212B8 r hdplus [internal] card initializing error
2013/12/30 18:33:07 0 s init for all local cards done
2013/12/30 18:33:07 0 s anti cascading disabled
2013/12/30 18:33:07 B26238 c plain dvbapi-client granted (local, au=auto (1 reader))
2013/12/30 18:33:07 B26238 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1

und mit sci1 so:

Spoiler

[TABLE="class: status"]
[TR]
[TH="class: statuscol0"]hide[/TH]
[TH="class: statuscol1"]Thread ID[/TH]
[TH="class: statuscol2"]Type[/TH]
[TH="class: statuscol3"]ID[/TH]
[TH="class: statuscol4"]Label[/TH]
[TH="class: statuscol5"]AU[/TH]
[TH="class: statuscol6"]Crypted[/TH]
[TH="class: statuscol7"]Address[/TH]
[TH="class: statuscol8"]Port[/TH]
[TH="class: statuscol9"]Protocol[/TH]
[TH="class: statuscol10"]Login[/TH]
[TH="class: statuscol11"]Online[/TH]
[TH="class: statuscol12"]CAID:SRVID[/TH]
[TH="class: statuscol13"]Current Channel[/TH]
[TH="class: statuscol14"]LB Value/ Reader[/TH]
[TH="class: statuscol15"]Idle[/TH]
[TH="class: statuscol16"]Status[/TH]
[/TR]
[TR="class: s"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]0x7a9df0[/TD]
[TD="class: statuscol2"]s[/TD]
[TD="class: statuscol3"]0[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]server[/TD]
[TD="class: statuscol10"]30.12.13 18:35:14[/TD]
[TD="class: statuscol11"]00:00:22[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:00:22[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR="class: h"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]0x7b26c8[/TD]
[TD="class: statuscol2"]h[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]http[/TD]
[TD="class: statuscol10"]30.12.13 18:35:14[/TD]
[TD="class: statuscol11"]00:00:22[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:00:00[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Readers 0/1[/TD]
[/TR]
[TR="class: r"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol2"]r[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]hdplus[/TD]
[TD="class: statuscol5"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol6"]OFF[/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]internal[/TD]
[TD="class: statuscol10"][/TD]
[TD="class: statuscol11"][/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol15"]00:00:22[/TD]
[TD="class: statuscol16"]OFF

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Clients 1/1 (0 with ECM within last 25 seconds)[/TD]
[/TR]
[TR="class: c"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol2"]c[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]local[/TD]
[TD="class: statuscol5"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol6"]OFF[/TD]
[TD="class: statuscol7"]0.0.0.0[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]dvbapi[/TD]
[TD="class: statuscol10"]30.12.13 18:35:15[/TD]
[TD="class: statuscol11"]00:00:21[/TD]
[TD="class: statuscol12"]0000:EF10[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:00:21[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[/TABLE]
2013/12/30 18:35:25 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:25 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:26 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:26 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:26 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:27 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:27 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:27 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:28 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:28 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:28 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:28 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:29 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:29 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:29 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:30 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:30 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:30 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:31 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:31 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:31 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:31 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:32 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:32 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:32 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:33 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:33 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:33 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:34 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:34 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:34 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:34 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:35 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:35 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:35 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:36 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:36 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!

hier aus der oscam.log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Dec 30 18:35:14 2013
-------------------------------------------------------------------------------
2013/12/30 18:35:14 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9144 (mipsel-oe-linux)
2013/12/30 18:35:14 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 4462
2013/12/30 18:35:14 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2013/12/30 18:35:14 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2013/12/30 18:35:14 0 s signal handling initialized
2013/12/30 18:35:14 0 s 157 service-id's loaded in 6ms
2013/12/30 18:35:14 0 s cccam: initialized (fd=6, port=30000, prio=1)
2013/12/30 18:35:14 0 s hdplus [internal] creating thread for device /dev/sci1
2013/12/30 18:35:14 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/12/30 18:35:14 0 s waiting for local card init
2013/12/30 18:35:14 77105E60 r hdplus [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
2013/12/30 18:35:14 7B26C8 h webif: decompressed 55133 bytes back into 157704 bytes
2013/12/30 18:35:14 7B26C8 h HTTP Server running. ip=0.0.0.0 port=2002
2013/12/30 18:35:15 0 s init for all local cards done
2013/12/30 18:35:15 0 s anti cascading disabled
2013/12/30 18:35:15 77107B68 c plain dvbapi-client granted (local, au=auto (1 reader))
2013/12/30 18:35:15 77107B68 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2013/12/30 18:35:19 77107B68 c [DVBAPI] Receiver sends PMT command 3 for channel EF10
2013/12/30 18:35:19 77107B68 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0008 index 0003
2013/12/30 18:35:19 77107B68 c [ADD PID 0] CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2013/12/30 18:35:19 77107B68 c [ADD PID 1] CAID: 1843 ECM_PID: 19CC PROVID: 000000
2013/12/30 18:35:19 77107B68 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2013/12/30 18:35:19 77107B68 c [ADD PID 3] CAID: 098C ECM_PID: 1ACC PROVID: 000000
2013/12/30 18:35:19 77107B68 c [ADD PID 4] CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2013/12/30 18:35:19 77107B68 c Found 5 ECMpids and 6 STREAMpids in PMT
2013/12/30 18:35:19 77107B68 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0008 index 0003
2013/12/30 18:35:19 77107B68 c New program number: EF10 (RTL HD) [pmt_list_management 3]
2013/12/30 18:35:19 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:19 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:19 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:19 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:20 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:20 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:20 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:21 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:21 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:21 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:22 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:22 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 18:35:22 77107B68 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 18:35:23 77107B68 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!

 

[dodo83]

AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/

dann wird es wohl dev/sci0 sein
leider hast/bekommst du da einen Resync Error, probiere mal eine etwas ältere oscam version (8XXXer)

oder probier die erstmal mit scam zu aktivieren und dann mit oscam laufen zu lassen

 

[flexxx]

AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/

ältere version hab ich auch schon getestet, wird auch nix hell wie gesagt, die karte geht ja wenn ich die device auf 1 stelle... oder kann sie laufen, obwohl sie mit scam noch nicht aktiviert ist???

 

[dodo83]

AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/

wie die karte geht wenn du auf sci1 stellst? im post oben steht OFF, da muss ein CARDOK stehen
wenn die nicht aktiviert ist kann die nicht laufen, eingelesen aber sollte die schon werden

 

[flexxx]

AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/

nein sie geht nur wenn ich sie auf device = 1 stelle bei dev/sci0 geht nix... hatte sie eben mit scam am laufen, wieder zurück auf oscam kein bild, bin echt am verzweifeln...

das stand jetzt im log...

Spoiler

>> OSCam << cardserver started at Mon Dec 30 18:59:35 2013
-------------------------------------------------------------------------------
2013/12/30 18:59:35 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9144 (mipsel-oe-linux)
2013/12/30 18:59:35 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 5761
2013/12/30 18:59:35 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2013/12/30 18:59:35 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2013/12/30 18:59:35 0 s signal handling initialized
2013/12/30 18:59:35 0 s 157 service-id's loaded in 4ms
2013/12/30 18:59:35 0 s cccam: initialized (fd=6, port=30000, prio=1)
2013/12/30 18:59:35 0 s hdplus [internal] creating thread for device /dev/sci0
2013/12/30 18:59:35 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/12/30 18:59:35 0 s waiting for local card init
2013/12/30 18:59:35 77604970 r hdplus [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/12/30 18:59:35 77604970 r hdplus [internal] card detected
2013/12/30 18:59:35 B69C10 h webif: decompressed 55133 bytes back into 157704 bytes
2013/12/30 18:59:35 B69C10 h HTTP Server running. ip=0.0.0.0 port=2002
2013/12/30 18:59:36 77604970 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2013/12/30 18:59:36 77604970 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/30 18:59:36 77604970 r hdplus [internal] Calculated work ETU is 6.40 us reader mhz = 500
2013/12/30 18:59:36 77604970 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/30 18:59:37 77604970 r hdplus [internal] Warning: Card returned error on setting ifsd value to 251
2013/12/30 18:59:38 77604970 r hdplus [internal] detect native nagra card
2013/12/30 18:59:40 77604970 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/12/30 18:59:41 77604970 r hdplus [internal] T1 Resync command error, trying to reactivate!
2013/12/30 18:59:42 77604970 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2013/12/30 18:59:42 77604970 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/30 18:59:42 77604970 r hdplus [internal] Calculated work ETU is 6.40 us reader mhz = 500
2013/12/30 18:59:42 77604970 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/30 18:59:44 77604970 r hdplus [internal] Warning: Card returned error on setting ifsd value to 251
2013/12/30 18:59:45 77604970 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/12/30 18:59:46 77604970 r hdplus [internal] T1 Resync command error, trying to reactivate!
2013/12/30 18:59:47 77604970 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2013/12/30 18:59:47 77604970 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/30 18:59:47 77604970 r hdplus [internal] Calculated work ETU is 6.40 us reader mhz = 500
2013/12/30 18:59:48 77604970 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/30 18:59:49 77604970 r hdplus [internal] Warning: Card returned error on setting ifsd value to 251
2013/12/30 18:59:49 77604970 r hdplus [internal] card system not supported
2013/12/30 18:59:49 77604970 r hdplus [internal] Normal mode failed, reverting to Deprecated Mode
2013/12/30 18:59:50 77604970 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2013/12/30 18:59:50 77604970 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/30 18:59:50 77604970 r hdplus [internal] Calculated work ETU is 74.40 us reader mhz = 500
2013/12/30 18:59:50 77604970 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/30 18:59:51 77604970 r hdplus [internal] Warning: Card returned error on setting ifsd value to 251
2013/12/30 18:59:52 77604970 r hdplus [internal] detect native nagra card
2013/12/30 18:59:54 77604970 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/12/30 18:59:55 77604970 r hdplus [internal] T1 Resync command error, trying to reactivate!
2013/12/30 18:59:56 77604970 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2013/12/30 18:59:56 77604970 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/30 18:59:56 77604970 r hdplus [internal] Calculated work ETU is 6.40 us reader mhz = 500
2013/12/30 18:59:56 77604970 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/30 18:59:58 77604970 r hdplus [internal] Warning: Card returned error on setting ifsd value to 251
2013/12/30 18:59:59 77604970 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/12/30 19:00:00 77604970 r hdplus [internal] T1 Resync command error, trying to reactivate!
2013/12/30 19:00:01 77604970 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2013/12/30 19:00:01 77604970 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/30 19:00:01 77604970 r hdplus [internal] Calculated work ETU is 6.40 us reader mhz = 500
2013/12/30 19:00:01 77604970 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/30 19:00:03 77604970 r hdplus [internal] Warning: Card returned error on setting ifsd value to 251
2013/12/30 19:00:03 77604970 r hdplus [internal] card system not supported
2013/12/30 19:00:03 77604970 r hdplus [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2013/12/30 19:00:03 77604970 r hdplus [internal] card initializing error
2013/12/30 19:00:03 0 s init for all local cards done
2013/12/30 19:00:03 0 s anti cascading disabled
2013/12/30 19:00:03 77606678 c plain dvbapi-client granted (local, au=auto (1 reader))
2013/12/30 19:00:03 77606678 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1

 

[dodo83]

AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/

auf Device = 1 hattest du die im erstem Post und da stand UNKNOWN, die kann nicht so gehen nur mit oscam, da muss CARDOK stehen und die device für Interne Reader bei Dreamboxen ist nunmal sci0 oder sci1, die 1 wird wenn ich mich nicht irre bei Coolstream verwendet

 

[flexxx]

AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/

beim letzten log hatte ich es auf sci0 da gehts nicht, wenn ich device = 1 einstelle und oscam neu starte kommt dann bild..... das ist ja das komische... :/

 

[dodo83]

AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/

mit dev/sci0 wird die erkannt nur nicht richtig eingelesen

2013/12/30 18:59:35 77604970 r hdplus [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/12/30 18:59:35 77604970 r hdplus [internal] card detected
2013/12/30 18:59:35 B69C10 h webif: decompressed 55133 bytes back into 157704 bytes
2013/12/30 18:59:35 B69C10 h HTTP Server running. ip=0.0.0.0 port=2002
2013/12/30 18:59:36 77604970 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2013/12/30 18:59:36 77604970 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/30 18:59:36 77604970 r hdplus [internal] Calculated work ETU is 6.40 us reader mhz = 500
2013/12/30 18:59:36 77604970 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/30 18:59:37 77604970 r hdplus [internal] Warning: Card returned error on setting ifsd value to 251
2013/12/30 18:59:38 77604970 r hdplus [internal] detect native nagra card
2013/12/30 18:59:40 77604970 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

nur dann bekommst du den Resync Error

deswegen mein vorschlag mit einer 7XXXer oder 8XXXer oscam es zu probieren oder einfach einen externen reader zum testen nehmen

 

[flexxx]

AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/

Einen externen reader habe Ich leider nicht, wollte es eigentlich auch intern machen.. Ich Versuchs gleich nochmal mit einer älteren Version und poste den Log..

Gesendet von meinem HTC One S mit Tapatalk 2

 

[dodo83]

AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/

du hast ja 2 kartenslots, oder?
probier die karte im anderem mit dev/sci1 dann auch

 

[flexxx]

AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/

du meinst dann mit der älteren version oder??

 

[dodo83]

AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/

kannst auch erstmal mit der aktuellen danach kannst du immer noch wechseln

 

[flexxx]

AW: Diskussionsthread zum How-To [Newbiegeeignet] OScam mit Dreambox und S02/HD+/V13/

also mit der aktuellen oscam sieht der log im unteren schacht mit sci1 so aus:

Spoiler

2013/12/30 20:14:30 C952A8 r hdplus [internal] IFD: Opening device 1
2013/12/30 20:14:30 C952A8 r hdplus [internal] ERROR: Opening device 1 (errno=2 No such file or directory)
2013/12/30 20:14:30 C952A8 r hdplus [internal] IFD: ERROR: Can't open 1 device
2013/12/30 20:14:30 C952A8 r hdplus [internal] Cannot open device: 1
2013/12/30 20:14:48 C876C8 h WebIf: Received stale header from 192.168.0.100 (nonce=729626c9efcc7bc2e9048e8861cb5ce2, expectednonce=dedbf6505f5b36b2820eca304ad8dd05, opaque=09edf1a08e84bd833c233b456aded7d8).
2013/12/30 20:14:48 C876C8 h WebIf: Origin checked. Result: access from 192.168.0.100 => allowed
2013/12/30 20:14:49 C876C8 h add reader job action 9 queue length 2 hdplus
2013/12/30 20:14:49 C876C8 h Reader hdplus restarted by WebIF from 192.168.0.100
2013/12/30 20:14:49 C876C8 h WebIf: Origin checked. Result: access from 192.168.0.100 => allowed
2013/12/30 20:15:01 0 --- Skipped 6 duplicated log lines ---
2013/12/30 20:15:01 0 share-updater mode=interval t=240s
2013/12/30 20:15:30 C952A8 r hdplus [internal] IFD: Opening device 1
2013/12/30 20:15:30 C952A8 r hdplus [internal] ERROR: Opening device 1 (errno=2 No such file or directory)
2013/12/30 20:15:30 C952A8 r hdplus [internal] IFD: ERROR: Can't open 1 device
2013/12/30 20:15:30 C952A8 r hdplus [internal] Cannot open device: 1
2013/12/30 20:16:30 C952A8 r hdplus [internal] IFD: Opening device 1
2013/12/30 20:16:30 C952A8 r hdplus [internal] ERROR: Opening device 1 (errno=2 No such file or directory)
2013/12/30 20:16:30 C952A8 r hdplus [internal] IFD: ERROR: Can't open 1 device
2013/12/30 20:16:30 C952A8 r hdplus [internal] Cannot open device: 1
2013/12/30 20:16:32 C876C8 h WebIf: Received stale header from 192.168.0.100 (nonce=dedbf6505f5b36b2820eca304ad8dd05, expectednonce=9bec3f56df832578127eed9cac338188, opaque=09edf1a08e84bd833c233b456aded7d8).
2013/12/30 20:16:32 C876C8 h WebIf: Origin checked. Result: access from 192.168.0.100 => allowed
2013/12/30 20:16:32 C876C8 h add reader job action 9 queue length 3 hdplus
2013/12/30 20:16:32 C876C8 h Reader hdplus restarted by WebIF from 192.168.0.100
2013/12/30 20:16:32 C876C8 h WebIf: Origin checked. Result: access from 192.168.0.100 => allowed
2013/12/30 20:16:33 0 --- Skipped 1 duplicated log lines ---
2013/12/30 20:17:30 0 --- Skipped 3 duplicated log lines ---
2013/12/30 20:17:30 C952A8 r hdplus [internal] IFD: Opening device 1
2013/12/30 20:17:30 C952A8 r hdplus [internal] ERROR: Opening device 1 (errno=2 No such file or directory)
2013/12/30 20:17:30 C952A8 r hdplus [internal] IFD: ERROR: Can't open 1 device
2013/12/30 20:17:30 C952A8 r hdplus [internal] Cannot open device: 1
2013/12/30 20:18:30 C952A8 r hdplus [internal] IFD: Opening device 1
2013/12/30 20:18:30 C952A8 r hdplus [internal] ERROR: Opening device 1 (errno=2 No such file or directory)
2013/12/30 20:18:30 C952A8 r hdplus [internal] IFD: ERROR: Can't open 1 device
2013/12/30 20:18:30 C952A8 r hdplus [internal] Cannot open device: 1
2013/12/30 20:18:56 C876C8 h WebIf: Origin checked. Result: access from 192.168.0.100 => allowed
2013/12/30 20:18:56 C876C8 h WebIf: Received stale header from 192.168.0.100 (nonce=9bec3f56df832578127eed9cac338188, expectednonce=500306e55552b7431e00db60b6f79305, opaque=09edf1a08e84bd833c233b456aded7d8).
2013/12/30 20:18:56 C876C8 h WebIf: Origin checked. Result: access from 192.168.0.100 => allowed
2013/12/30 20:18:56 C876C8 h add reader job action 9 queue length 4 hdplus
2013/12/30 20:18:56 C876C8 h Reader hdplus restarted by WebIF from 192.168.0.100