Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenloses um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereiche, welche für Gäste verwehrt bleiben

Diablo WiFi and WPA / WPA2 Problems + Solution

Lightning01

Newbie
Registriert
1. August 2009
Beiträge
1
Reaktionspunkte
2
Punkte
23
Hi,

First of all I do speak german as well but I prefer to write this in english (more people can read it!!)

I just want to share my findings after a few hours of debugging WPA / WPA2 WLAN encryption as many other people seem to have troubles as well!!

1.) WPA/WPA2 config method has changed in version 1.77, there is no separate config / menu entry for WAP and WPA2, this has not been updated in CAS studio (yet), also LANG files have not been changed (new files attached - English and German - copy to \MENU\LANG - its not possible to set key via CI Menu), best way to configure WPA is config.xml file directly, see below.

2.) If you want to pair Diablo Wifi with a Cisco AP (c1100 in my case) you will encounter problems as soon as you turn on WPA/WPA2. Reason is a timeout during WAP Key handshake.
Cisco Debug commands (needs level 15):
debug dot11 aaa manager all
debug dot11 aaa dispatcher
term mon


Now you will see the following during authentication:
//SNIP
dot11_mgr_sm_hs_callback: [1] Handshake msg to 0019.2896.2613, timer set: timeout 100 ms
dot11_mgr_sm_run_machine: Executing Action(WPAV2_PTK_MSG2_WAIT,TIMEOUT) for 0019.2896.2613
//SNIP

due to the time-out the authentication will finaly fail:
//SNIP
dot11_mgr_sm_handshake_fail: Handshake failure for 0019.2896.2613
dot11_aaa_send_response: wlccp_ap_auth_method_done 50, method_done 8
dot11_aaa_send_response: Sending response: 0 for: 0019.2896.2613
%DOT11-7-AUTH_FAILED: Station 0019.2896.2613 Authentication failed
//SNIP

To anyway make the WPA/WPA2 working time-out needs to be set to a higher value (in global config mode):
dot11 wpa handshake timeout 500

Then you should get something like that
//SNIP
Aug 2 21:19:51.306: dot11_mgr_sm_hs_callback: [3] Handshake msg to 0019.2896.2613, timer set: timeout 500 ms
Aug 2 21:19:51.335: dot11_mgr_sm_parse_client_pak: Received EAPOL packet from 0019.2896.2613
//SNIP

//SNIP
Aug 2 21:19:51.379: wpav2 Handshake passed
Aug 2 21:19:51.380: dot11_mgr_sm_handshake_pass: Handshake pass for 0019.2896.2613
Aug 2 21:19:51.380: dot11_aaa_send_response: wlccp_ap_auth_method_done 50, method_done 8
Aug 2 21:19:51.380: dot11_aaa_send_response: Sending response: 2 for: 0019.2896.2613
Aug 2 21:19:51.380: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 0019.2896.2613 Associated KEY_MGMT[WPAv2 PSK]
Aug 2 21:19:51.380: dot11_aaa_client_associate: Associated 0019.2896.2613
//SNIP

Finally here is the explanation for the config file:
WIFI_ENABLED="Y"
Wifi ON/OFF
WIFI_DOMAIN="ETSI"
Regulatory Domain --> see
Du musst dich Anmelden oder Registrieren um diesen link zusehen!
for further infos

WIFI_AP="testssid"
ESSID
WIFI_DHCP="Y"
DHCP YES/NO
WIFI_IP="0.0.0.0"
NOT REQUIRED IF DHCP YES
WIFI_NETMASK="0.0.0.0"
NOT REQUIRED IF DHCP YES
WIFI_GATEWAY="0.0.0.0"
NOT REQUIRED IF DHCP YES
WIFI_DNS="0.0.0.0"
NOT REQUIRED IF DHCP YES
WIFI_ENCRYPT="WPA-PSK + WPA2-PSK"
encryption to be used
WIFI_WEP_KEYIDX="1"
only used for WEP64 and WEP128
WIFI_WEP64_Key1="0000000000"
only used for WEP64 and WEP128
WIFI_WEP64_Key2="0000000000"
only used for WEP64 and WEP128
WIFI_WEP64_Key3="0000000000"
only used for WEP64 and WEP128
WIFI_WEP64_Key4="0000000000"
only used for WEP64 and WEP128
WIFI_WEP128_Key1="00000000000000000000000000"
only used for WEP64 and WEP128
WIFI_WEP128_Key2="00000000000000000000000000"
only used for WEP64 and WEP128
WIFI_WEP128_Key3="00000000000000000000000000"
only used for WEP64 and WEP128
WIFI_WEP128_Key4="00000000000000000000000000"
only used for WEP64 and WEP128
WIFI_WPA_PSK="1234567890"
WPA/WPA2 PSK (ASCII 7 to 63 characters)
WIFI_WPA_PMKPSK="1234567890"
WPA/WPA2 PSK (ASCII 7 to 63 characters)
WIFI_WPA_PMKAP="testssid"
ESSID (max 30 ASCII characters- used as PBKDF2 salt)
WIFI_WPA_PMK="78CC308D65C76BB78AD422EDD2CB228A1281F4101B59B30636F478316C57CA88"
WPA/WPA2 cleartext encryption KEY --> calculated as explained here Link veralten (gelöscht)
WIFI_TXPOWER="17"
WIFI Transmit Power

I hope i could help a few people,
rgds Lightning
 
AW: Diablo WiFi and WPA / WPA2 Problems + Solution

Lightning01, great work, well done.

Most Diablo WiFi problems are caused by unreliable WiFi connections on one side, the other part may be configuration problems. Will investigate your findings.

Thanks again!!!

Lasst mich wissen falls ihr das nicht lesen könnt. Übersetzen ist kein Problem.
 
AW: Diablo WiFi and WPA / WPA2 Problems + Solution

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

lesen schon und das ganze funktioniert auch, allerdings nicht mehr nach neustart bzw aus und wieder einschalten des Fernsehers.. er findet mein Netzwerk auch immer wieder, allerdings verbindet er nicht vernünftig wenn ich es einfach übers WiFi-Menü-Steuere..
 
Zurück
Oben