Debian-Server: camd3 zu oscam zum client

[ragan62]

Ich mal wieder.
Hab auf meinem Debian-Server camd3 und oscam installiert.

Problem: Camd3 soll als reader für oscam laufen

also:
-camd3 > emu für orf und austria.
-oscam > reader für sky s02.

So sieht´s bisher aus.
Debian: oscam.conf

Spoiler

[global]
usrfile = /Oscam/log/oscamuser.log
logfile = /Oscam/log/oscam.log
cwlogdir = /Oscam/log/
disableuserfile = 0
usrfileflag = 1
fallbacktimeout = 2000
cachedelay = 120
unlockparental = 1
nice = -1
maxlogsize = 4000
saveinithistory = 1
lb_mode = 1
lb_savepath =


[monitor]
hideclient_to = 15
appendchaninfo = 0


[newcamd]
port = 15000@1702:000000
key = 0102030405060708091011121314
allowed = 0.0.0.0-255.255.255.255


[webif]
httpport = 83
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = xxxxxxxxxxxxxxxxxxx.com

Debian: oscam.server

Spoiler

[reader]
label = sky02
protocol = smartreader
device = 003:002
services = sky-s02
smargopatch = 1
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
ccchop = 2

[reader]
label = camd3
protocol = camd35
device = 127.0.0.1,16000
user = server
password = server
services = orf,austria
caid = 0D05
group = 2

Debian: camd3.config

Spoiler

UDP_PORT=16000
HTTP_PORT=9090
HTTP_ADMIN=camd3
HTTP_PASSWORD=camd3
LOG=1
DNS_CACHE=600
LOG_FILE=/var/keys/camd3.log
DBOX2_AU=0
USERS=/var/keys/camd3.users
SERVERS=/var/keys/camd3.servers
KEYS=/var/keys/camd3.keys
SOCKET=/var/tmp/camd.socket

Das Ergebnis:camd3 wird als proxy erkannt aber nicht (richtig) eingebunden.
Anfragen des client werden rejected.

Als Client (topfield 7700hdpvr, aaf enigma2) dient VizCam 1.19.

Client: vizcam.conf

Spoiler

[global]
logfile = stdout
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 160
bindwait = 120
nice = -1
serialreadertimeout = 1500
maxlogsize = 2
saveinithistory = 1
waitforcards = 0
lb_mode = 0
lb_save = 200

[webif]
httpport = 8888
httpuser = root
httppwd = vizcam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[monitor]
appendchaninfo = 1
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255

########################### readers ##############################
# enable = 0/1 (off/on this reader) #
##################################################################
[reader]
enable = 1
label = newcamd-reader
protocol = newcamd
key = 0102030405060708091011121314
device = 192.168.178.22,15000
user = benutzer1
caid = 1702,1833,0d05
password = password1
group = 1,2,3
emmcache = 1,1,2


########################### DVBAPI ###############################
######### die " ! " entfernen fuer jeweiliges Paket ##############
##################################################################
[account]
user = vizcam
pwd = pass
group = 1
au = 1
services = !hdplus,skyde,orf,austriasat
betatunnel = 1833.FFFF:1702
keepalive = 1
uniq = 0


[dvbapi]
enabled = 1
AU = 1
user = vizcam
boxtype = dbox2
########################### services #############################
[hdplus]
caid=1830,1843
srvid=277E,EF10,EF11,EF74,EF75,EF76,EF14,EF15,EF77

[skyde]
caid=1702,1833
srvid=003A,006f,0070,0071,0072,006B,006A,0077,007A,007B,007C,0084,0081,007e,0080,0083,0082,000F,000A,0001,007F,000B,002b,0009,0029,001b,002a,000e,0044,003e,18b2,000d,000C,0034,0017,0008,0204,0014,0024,0032,4462,4461,003c,0298,0043,0010,0206,0016,0203,003f,001d,0045,0018,0042,0022,0019,001a,700a,001c,0013,3393,003d,6ff1,00df,0011,00dd,00de,00fd,014d,0143,0139,012f,0125,011b,0107,0111,016b,0175,0035,3331,00a8,7009,6fff,0015,0201,0159,0163,016d,0046,00fb,0105,010f,0119,0123,012d,0137,0141,014b,0106,0110,011a,0124,012e,0138,0142,014c,0156,0160,00fc,0096,0097,0098,0099,009A,009B,009C,2EFE,0075,07FF,0040,0039,0023,0026,0021,0027,0038,0025,007c,0076

[orf]
caid=0D05
srvid=132F,1330,3332,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27

[austriasat]
caid=0D05
srvid=003E,07FF,4462,4461,2EFE,6FEE,6FEF,6FF0,6FFD,6FFF,07FA,07FD,0046,0045,07FF,6FF3,6FF0

Wäre erfreut über jede Hilfe.


ps: Wenn ich camd3 als zweiten reader in vizcam angebe funzt es, ist aber nicht was ich will.
Sieht so aus:

Spoiler

[reader]
enable = 1
label = camd3-reader
protocol = camd35
device = 192.168.178.22,16000
user = benutzer1
caid = 0d05
password = password1
group = 1,2,3
emmcache = 1,1,2

 

[GTD Bastion]

AW: Debian-Server: camd3 zu oscam zum client

Hast du überhaupt Camd3 gestartet?
Wenn ja, poste bitte mal deine Oscam.user

 

[mr.nice53]

AW: Debian-Server: camd3 zu oscam zum client

Ich habe das gleiche Problem ich habe Camd3 gestartet.
Nur ich habe keinen Debian-Server.

oscam.user

Spoiler

[account]
user = xxxxx
pwd =
group = 1,2,3,4
caid = 1702,1833,1843,09C4,0D05
uniq = 0
monlevel = 4
sleep = 0
au = sky,hdplus,orf
ident = 0000:000000,003411,008011,041700,FFF400,020810,020820,024400,023800,030700,030B00,023B00,021110,0408,000004,000010
services = skyde,skywelt,skyweltextra,skyfilm,skysport,skybundesliga,skymusicchoiceextra,skyhd,sky3d,bluemovie,skyselect,skysonstige,hdplus,skybundesliga,bigbrother,orf,austriasat
betatunnel = 1833.0072:1702,1833.006A:1702,1833.006B:1702,1833.006F:1702,1833.0070:1702,1833.0071:1702,1833.0075:1702,1833.007A:1702,1833.007B:1702,1833.007C:1702,1833.007E:1702,1833.007F:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084:1702,1833.0077:1702,1833.0069:1702,1833.0076:1702
chid = 0604:000014,000069,0000F4,0000F5,0000FA
suppresscmd08 = 0
cccmaxhops = 2
cccreshare = 1
keepalive = 1

 

[Kermit]

AW: Debian-Server: camd3 zu oscam zum client

Hallo ragan62,

wie sieht denn dein Log aus, wenn du die entsprechenden Sender anschauen willst?
Wenn ich bei mir OScam neustarte, sieht das Genauso aus, wie bei dir. Der Eintrag ändert sich aber, wenn einmal die Sender aufgerufen wurden. Btw wie sieht deine User Konfig aus?

Grüße

Kermit

 

[ragan62]

AW: Debian-Server: camd3 zu oscam zum client

Leider kann ich erst jetzt antworten:emoticon-0124-worri

meine oscam.user (relevanter Auszug)

Spoiler

[account]
user = benutzer1
pwd = xxxxxx
group = 1,2
monlevel = 1
au = 1
services = orf,austria,sky-s02
caid = 1702,1833,0D05
keepalive = 0

@T1x: camd3 läuft, wird auch durch vizcam auf client angesprochen.

Das log zeigt zwar an, dass der camd3-reader existiert zeigt aber keine anfragen auf!

oscam.log (Auszug)

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Nov 19 18:27:58 2011
-------------------------------------------------------------------------------
2011/11/19 18:27:58 B74406C0 s >> OSCam << cardserver started, version 1.10rc-svn-SB-Trunk-by-Giftstaub, build #5921 (i686-pc-linux)
2011/11/19 18:27:58 B74406C0 s version=1.10rc-svn-SB-Trunk-by-Giftstaub, build #5921, system=i686-pc-linux, nice=-1
2011/11/19 18:27:58 B74406C0 s client max. idle=120 sec, debug level=0
2011/11/19 18:27:58 B74406C0 s max. logsize=4000 Kb, loghistorysize=4096 bytes
2011/11/19 18:27:58 B74406C0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2011/11/19 18:27:58 B74406C0 s services reloaded: 0 services freed, 4 services loaded, rejected 0
2011/11/19 18:27:58 B74406C0 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
2011/11/19 18:27:58 B74406C0 s signal handling initialized (type=sysv)
2011/11/19 18:27:58 B74406C0 s 143 service-id's loaded in 0ms
2011/11/19 18:27:58 B74406C0 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/11/19 18:27:58 B74406C0 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/11/19 18:27:58 B74406C0 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/11/19 18:27:58 B74406C0 s monitor: disabled
2011/11/19 18:27:58 B74406C0 s camd33: disabled
2011/11/19 18:27:58 B74406C0 s camd35: disabled
2011/11/19 18:27:58 B74406C0 s cs378x: disabled
2011/11/19 18:27:58 B74406C0 s newcamd: initialized (fd=8, port=15000, crypted)
2011/11/19 18:27:58 B74406C0 s CAID: 1702
2011/11/19 18:27:58 B74406C0 s provid #0: 000000
2011/11/19 18:27:58 B74406C0 s radegast: disabled
2011/11/19 18:27:58 B74406C0 s http thread started
2011/11/19 18:27:58 B74406C0 s creating thread for device 003:002
2011/11/19 18:27:58 B74406C0 s creating thread for device 127.0.0.1
2011/11/19 18:27:58 B74406C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/11/19 18:27:58 B74406C0 s waiting for local card init
2011/11/19 18:27:58 B73E6B70 p proxy thread started (thread=B73E6B70, label=camd3, server=127.0.0.1)
2011/11/19 18:27:58 B73E6B70 p proxy 127.0.0.1:16000 (fd=13)
2011/11/19 18:27:58 B73F2B70 r reader thread started (thread=B73F2B70, label=sky02, device=003:002, detect=cd, mhz=600, cardmhz=600)
2011/11/19 18:27:58 B73F2B70 r Using 0x82 as endpoint for smartreader hardware detection
2011/11/19 18:27:58 B73F2B70 r Found smartreader device 003:002
2011/11/19 18:27:58 B73FEB70 h HTTP Server listening on port 83
2011/11/19 18:27:58 B73F2B70 r sky02 card detected
2011/11/19 18:28:04 B73F2B70 r ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2011/11/19 18:28:04 B73F2B70 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2011/11/19 18:28:06 B73F2B70 r detect irdeto tunneled nagra card
2011/11/19 18:28:06 B73F2B70 r no rsa key configured -> using irdeto mode
2011/11/19 18:28:06 B73F2B70 r detect irdeto card
2011/11/19 18:28:06 B73F2B70 r caid: 1702, acs: 3.84, country code: GER
2011/11/19 18:28:06 B73F2B70 r providers: 4, ascii serial: xxxxxxxxxxx, hex serial: xxxxxxx, hex base: 1A
2011/11/19 18:28:09 B73F2B70 r active providers: 2 (000000,000000)
2011/11/19 18:28:09 B73F2B70 r found cardsystem irdeto
2011/11/19 18:28:09 B73F2B70 r entitlements for provider: 2, id: 000000
2011/11/19 18:28:09 B73F2B70 r chid: 0107, date: 2008/01/19 - 2008/01/21
//cut!
2011/11/19 18:28:11 B73F2B70 r chid: 05F1, date: 2011/04/16 - 2011/12/26
2011/11/19 18:28:12 B73F2B70 r [irdeto-reader] ready for requests
2011/11/19 18:28:12 B74406C0 s init for all local cards done
2011/11/19 18:28:12 B74406C0 s anti cascading disabled
2011/11/19 18:28:12 B6B9DB70 c client connected to 15000 port
2011/11/19 18:28:12 B6BA9B70 c client connected to 15000 port
2011/11/19 18:28:12 B6BA9B70 c encrypted newcamd:15000-client 192.168.178.37 granted (benutzer3, au=off)
2011/11/19 18:28:12 B6BA9B70 c user benutzer3 authenticated successfully (OSCam)
2011/11/19 18:28:12 B6BA9B70 c AU disabled for user benutzer3
2011/11/19 18:28:12 B6B9DB70 c encrypted newcamd:15000-client 192.168.178.100 granted (benutzer1, au=auto (2 reader))
2011/11/19 18:28:12 B6B9DB70 c user benutzer1 authenticated successfully (OSCam)
2011/11/19 18:28:12 B6B9DB70 c AU enabled for user benutzer1 on reader sky02
2011/11/19 18:28:13 B6B9DB70 c housekeeping lb stats thread started
2011/11/19 18:28:13 B6B9DB70 c benutzer1 (1702&000000/0071/93:7F12): found (654 ms) by sky02 (of 1 avail 1)

 

[GTD Bastion]

AW: Debian-Server: camd3 zu oscam zum client

Du brauchst pro Caid einen Newcamd Port.
Daher müsstest du da noch einen Port definieren.

 

[ragan62]

AW: Debian-Server: camd3 zu oscam zum client

Mir ist irgendwie nicht klar, was du meinst.:wacko1:

Denke du meinst wohl oscam.conf.

Bisher:
[newcamd]
port = 15000@1702:000000
key = 0102030405060708091011121314
allowed = 0.0.0.0-255.255.255.255

dazu etwa:
[newcamd]
port = 15001@0d05:000000,000004
key = 0102030405060708091011121314
allowed = 0.0.0.0-255.255.255.255



?

 

[GTD Bastion]

AW: Debian-Server: camd3 zu oscam zum client

Nicht ganz korrekt...so muss das aussehen:

Spoiler

[newcamd]
port                          = 15000@1702:000000;15001@0d05:000000,000004
key                           = 0102030405060708091011121314
allowed                       = 0.0.0.0-255.255.255.255

Dementsprechend muss deine Clientconfig mit Vizcam so aussehen:

Spoiler

[reader]
enable       = 1
label        = newcamd-reader
protocol     = newcamd
key          = 0102030405060708091011121314
device       = 192.168.178.22,15000
user         = benutzer1
caid         = 1702,1833
password     = password1
group        = 1,2,3
emmcache     = 1,1,2

[reader]
enable       = 1
label        = newcamd-reader
protocol     = newcamd
key          = 0102030405060708091011121314
device       = 192.168.178.22,15001
user         = benutzer1
caid         = 0d05
password     = password1
group        = 1,2,3
emmcache     = 1,1,2

Wie bereits geschrieben brauchst du pro Caid je einen Newcamd Port und musst dementsprechend auch die N-Lines einrichten.

 

[arys]

AW: Debian-Server: camd3 zu oscam zum client

Hallo!

leider habe ich das gleiche Problem, camd3 als proxy für oscam!

Oscam verbindet sich leider nicht mit camd3.



Oscam version OSCAM 1.20-unstable_svn build #5982

camd3 versionen siehe da:

[10.12.2011 19:00:57 camd3: BOXTYPE: server
10.12.2011 19:00:57 camd3: LOG: 1
10.12.2011 19:00:57 camd3: UDP_PORT: 22222
10.12.2011 19:00:57 camd3: HTTP_PORT: 9080
10.12.2011 19:00:57 camd3: LOG_FILE: /var/keys/camd3.log
10.12.2011 19:00:57 camd3: DNS_CACHE: 60 sec
10.12.2011 19:00:57 camd3: UserDB(add): USER=server PASS=waldemar FROM=any SERVICES=all
10.12.2011 19:00:57 camd3: KeyDB: started
10.12.2011 19:00:57 camd3: HTTP: started on port 9080
10.12.2011 19:01:00 camd3: camd v3.902 - erfolgreich gestartet
10.12.2011 19:07:38 camd3: BOXTYPE: server
10.12.2011 19:07:38 camd3: LOG: 1
10.12.2011 19:07:38 camd3: UDP_PORT: 22222
10.12.2011 19:07:38 camd3: HTTP_PORT: 9080
10.12.2011 19:07:38 camd3: LOG_FILE: /var/keys/camd3.log
10.12.2011 19:07:38 camd3: DNS_CACHE: 60 sec
10.12.2011 19:07:38 camd3: UserDB(add): USER=server PASS=waldemar FROM=any SERVICES=all
10.12.2011 19:07:38 camd3: KeyDB: started
10.12.2011 19:07:38 camd3: HTTP: started on port 9080
10.12.2011 19:07:42 camd3: camd v3.902 - erfolgreich gestartet
10.12.2011 19:10:30 camd3: BOXTYPE: server
10.12.2011 19:10:30 camd3: LOG: 1
10.12.2011 19:10:30 camd3: UDP_PORT: 22222
10.12.2011 19:10:30 camd3: HTTP_PORT: 9080
10.12.2011 19:10:30 camd3: LOG_FILE: /var/keys/camd3.log
10.12.2011 19:10:30 camd3: DNS_CACHE: 60 sec
10.12.2011 19:10:30 camd3: UserDB(add): USER=oscam PASS=verbindung FROM=any SERVICES=all
10.12.2011 19:10:30 camd3: KeyDB: started
10.12.2011 19:10:30 camd3: HTTP: started on port 9080
10.12.2011 19:10:33 camd3: camd v3.902 - erfolgreich gestartet
10.12.2011 19:11:38 camd3: BOXTYPE: server
10.12.2011 19:11:38 camd3: LOG: 1
10.12.2011 19:11:38 camd3: UDP_PORT: 22222
10.12.2011 19:11:38 camd3: HTTP_PORT: 9080
10.12.2011 19:11:38 camd3: LOG_FILE: /var/keys/camd3.log
10.12.2011 19:11:38 camd3: DNS_CACHE: 60 sec
10.12.2011 19:11:38 camd3: UserDB(add): USER=oscam PASS=verbindung FROM=any SERVICES=all
10.12.2011 19:11:38 camd3: KeyDB: started
10.12.2011 19:11:38 camd3: HTTP: started on port 9080
10.12.2011 19:11:42 camd3: camd v3.902 - erfolgreich gestartet
10.12.2011 19:13:40 camd3: BOXTYPE: server
10.12.2011 19:13:40 camd3: LOG: 1
10.12.2011 19:13:40 camd3: UDP_PORT: 22222
10.12.2011 19:13:40 camd3: HTTP_PORT: 9080
10.12.2011 19:13:40 camd3: LOG_FILE: /var/keys/camd3.log
10.12.2011 19:13:40 camd3: DNS_CACHE: 60 sec
10.12.2011 19:13:40 camd3: UserDB(add): USER=oscam1 PASS=verbindung FROM=any SERVICES=all
10.12.2011 19:13:40 camd3: UserDB(add): USER=oscam2 PASS=verbindung FROM=any SERVICES=all
10.12.2011 19:13:40 camd3: UserDB(add): USER=oscam3 PASS=verbindung FROM=any SERVICES=all
10.12.2011 19:13:40 camd3: KeyDB: started
10.12.2011 19:13:40 camd3: HTTP: started on port 9080
10.12.2011 19:13:44 camd3: camd v3.902 - erfolgreich gestartet
10.12.2011 19:21:42 camd3: BOXTYPE: server
10.12.2011 19:21:42 camd3: LOG: 1
10.12.2011 19:21:42 camd3: UDP_PORT: 22222
10.12.2011 19:21:42 camd3: HTTP_PORT: 9080
10.12.2011 19:21:42 camd3: LOG_FILE: /var/keys/camd3.log
10.12.2011 19:21:42 camd3: DNS_CACHE: 60 sec
10.12.2011 19:21:42 camd3: UserDB(add): USER=oscam1 PASS=verbindung FROM=any SERVICES=all
10.12.2011 19:21:42 camd3: UserDB(add): USER=oscam2 PASS=verbindung FROM=any SERVICES=all
10.12.2011 19:21:42 camd3: UserDB(add): USER=oscam3 PASS=verbindung FROM=any SERVICES=all
10.12.2011 19:21:42 camd3: KeyDB: started
10.12.2011 19:21:42 camd3: HTTP: started on port 9080
10.12.2011 19:21:45 camd3: camd v3.899 - erfolgreich gestartet
10.12.2011 19:30:55 camd3: BOXTYPE: server
10.12.2011 19:30:55 camd3: LOG: 1
10.12.2011 19:30:55 camd3: UDP_PORT: 51697
10.12.2011 19:30:55 camd3: HTTP_PORT: 9080
10.12.2011 19:30:55 camd3: LOG_FILE: /var/keys/camd3.log
10.12.2011 19:30:55 camd3: DNS_CACHE: 60 sec
10.12.2011 19:30:55 camd3: UserDB(add): USER=oscam1 PASS=verbindung FROM=any SERVICES=all
10.12.2011 19:30:55 camd3: UserDB(add): USER=oscam2 PASS=verbindung FROM=any SERVICES=all
10.12.2011 19:30:55 camd3: UserDB(add): USER=oscam3 PASS=verbindung FROM=any SERVICES=all
10.12.2011 19:30:55 camd3: KeyDB: started
10.12.2011 19:30:55 camd3: HTTP: started on port 9080
10.12.2011 19:30:58 camd3: camd v3.899 - erfolgreich gestartet/QUOTE]


wer kann helfen?????? danke

lg arys

 

[arys]

AW: Debian-Server: camd3 zu oscam zum client

JEPPPPPPPPPP es geht!!!


an alle die das auch mal machen mit camd3 proxy! Einfach mal die Sender anwählen und umschalten dann geht der proxy camd3 in Betrieb !!!!!

lg arys

 

[dboxyo]

AW: Debian-Server: camd3 zu oscam zum client

Haben das Szenario mit CCcam, klappt auch ohne Probleme. Werden nur keine Provider angezeigt, ist aber auch nicht wichtig.