Maexchen74
Ist gelegentlich hier
- Registriert
- 20. Januar 2010
- Beiträge
- 48
- Reaktionspunkte
- 0
- Punkte
- 26
Hallo zusammen,
habe meine Oscam soweit hinbekommen, dank eurer hilfe. Doch gleine aussetzer habe ich noch unter den freien Programmen.
Vielleicht könnt ihr ja mal einen Blick auf meine einstellungen werfen.
oscam.conf
oscam.server
oscam.user
oscam.srvid
oscam.dvbapi
newcs.xml.dm800
newcs.xml
CCcam.cfg
Auszug aus dem WEBif
habe meine Oscam soweit hinbekommen, dank eurer hilfe. Doch gleine aussetzer habe ich noch unter den freien Programmen.
Vielleicht könnt ihr ja mal einen Blick auf meine einstellungen werfen.
oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.00-svn build #3303
# Read more:
[global]
serverip =
logfile =
disablelog = 1
disableuserfile = 1
usrfileflag = 1
#clienttimeout = 500
fallbacktimeout = 1000
clientmaxidle = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 10
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 256
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 4
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
#resolvegethostbyname = 1
[newcamd]
key = 0102030405060708091011121314
port = 24000@1834:000000
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
pmt_mode = 0
#request_mode = 1
#CAID request mode:
#0 = try all possible CAIDs one by one, default
#1 = try all CAIDs simultaneously
#ignore = 1833
#priority = 0100:0006a,0628:000000,0500:041700,0500:042700,1702,0D05
[webif]
httpport = 8081
httpuser = admin
httppwd =
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255
httphideidleclients = 0
httpreadonly = 0
# Read more:
Sie müssen registriert sein, um Links zu sehen.
[global]
serverip =
logfile =
disablelog = 1
disableuserfile = 1
usrfileflag = 1
#clienttimeout = 500
fallbacktimeout = 1000
clientmaxidle = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 10
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 256
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 4
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
#resolvegethostbyname = 1
[newcamd]
key = 0102030405060708091011121314
port = 24000@1834:000000
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
pmt_mode = 0
#request_mode = 1
#CAID request mode:
#0 = try all possible CAIDs one by one, default
#1 = try all CAIDs simultaneously
#ignore = 1833
#priority = 0100:0006a,0628:000000,0500:041700,0500:042700,1702,0D05
[webif]
httpport = 8081
httpuser = admin
httppwd =
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255
httphideidleclients = 0
httpreadonly = 0
oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.00-unstable_svn build #4651
# Read more:
[reader]
label = kabel
enable = 1
protocol = internal
detect = CD
device = /dev/sci0
# sci0 Lower Card Reader!!!!!
emmcache = 1,3,2
caid = 1834
group = 1
mhz = 368
cardmhz = 368
lb_weight = 100
rsakey = 8****1
boxkey = 6****B
# Read more:
Sie müssen registriert sein, um Links zu sehen.
[reader]
label = kabel
enable = 1
protocol = internal
detect = CD
device = /dev/sci0
# sci0 Lower Card Reader!!!!!
emmcache = 1,3,2
caid = 1834
group = 1
mhz = 368
cardmhz = 368
lb_weight = 100
rsakey = 8****1
boxkey = 6****B
oscam.user
# oscam.user generated automatically by Streamboard OSCAM 1.00-svn build #3303
# Read more:
[account]
user = local
pwd = local
disabled = 0
expdate =
group = 1
hostname =
uniq = 0
sleep = 0
monlevel = 4
au = 1
services =
caid =
ident =
chid =
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0
# Read more:
Sie müssen registriert sein, um Links zu sehen.
[account]
user = local
pwd = local
disabled = 0
expdate =
group = 1
hostname =
uniq = 0
sleep = 0
monlevel = 4
au = 1
services =
caid =
ident =
chid =
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0
oscam.srvid
0100:177A|Canal Digitaal|Geschiedenis 24|TV
0100:177F|Canal Digitaal|Holland Doc 24|TV
0100:1784|Canal Digitaal|Consumenten 24|TV
0100:1789|Canal Digitaal|Humor 24/Nost.Net|TV
0100:1793|Canal Digitaal|Boomerang|TV
0100:1798|Canal Digitaal|Discovery Science|TV
0100:179D|Canal Digitaal|Discovery Travel & Living|TV
0100:17A2|Canal Digitaal|Het Gesprek|TV
0100:17AC|Canal Digitaal|Body in Balance|TV
0100:17B1|Canal Digitaal|E! Entertainement|TV
0100:17C0|Canal Digitaal|Ned2 HD|TV
0100:17CA|Canal Digitaal|SBS6 HD|TV
0100:13AE|Canal Digitaal|Nat Geo Wild|TV
0100:13BA|Canal Digitaal|Retro Music TV|TV
0100:1B62|Canal Digitaal|Discovery HD|TV
0100:1B67|Canal Digitaal|NGC HD|TV
0100:1B6C|Canal Digitaal|RTL4 HD|TV
0100:1B71|Canal Digitaal|Brava HDTV|TV
0100:1B7B|Canal Digitaal|Ned1 HD|TV
0100:5156|Canal Digitaal|History|TV
0100:5158|Canal Digitaal|Sport1.2/Eredivisie Live2|TV
0100:13B1|Canal Digitaal|Eurosport HD|TV
0100:13B2|Canal Digitaal|History HD|TV
0100:51AE|Canal Digitaal|Film1.2|TV
0100:51B3|Canal Digitaal|Film1.3|TV
0100:51B8|Canal Digitaal|Film1 Action|TV
0100:51BD|Canal Digitaal|Sport1|TV
0100:51C2|Canal Digitaal|Sport1.2|TV
0100:51C7|Canal Digitaal|Car Channel|TV
0100:51D6|Canal Digitaal|Ned3 HD|TV
0100:51DB|Canal Digitaal|Film1 HD|TV
0100:51E0|Canal Digitaal|Sport1 HD|TV
0100:5212|Canal Digitaal|RTL7 HD|TV
0100:5217|Canal Digitaal|RTL5 HD|TV
0100:521C|Canal Digitaal|Net5 HD|TV
0100:5221|Canal Digitaal|Één HD|TV
0100:5226|Canal Digitaal|Ketnet/Canvas HD|TV
0100:522B|Canal Digitaal|Veronica/DisneyXD HD|TV
0100:4F7E|Canal Digitaal|Bebe TV|TV
0100:6FEF|Canal Digitaal|MTV Dance|TV
0100:6FF0|Canal Digitaal|VH1|TV
0100:6FF1|Canal Digitaal|VH1 Classic|TV
0100:6FF3|Canal Digitaal|MTV Rocks|TV
0100:6FB8|Canal Digitaal|MTVN HD|TV
0100:1F47|Canal Digitaal|Mezzo|TV
0100:6FFF|Canal Digitaal|MTV Music|TV
0100:7007|Canal Digitaal|MTV NL|TV
0100:2525|Canal Digitaal|Motors TV|TV
0100:4F50|Canal Digitaal|JimJam|TV
0100:4F55|Canal Digitaal|Hustler TV|TV
0100:4F56|Canal Digitaal|Zone Reality|TV
0100:4F57|Canal Digitaal|Extreme Sports|TV
0100:219F|Canal Digitaal|Yacht & Sail|TV
0100:07D4|Canal Digitaal|RTL4 SD|TV
0100:07D5|Canal Digitaal|RTL5 SD|TV
0100:07D6|Canal Digitaal|RTL7 SD|TV
0100:07DA|Canal Digitaal|TV Oranje|TV
0100:07DF|Canal Digitaal|Discovery|TV
0100:07E4|Canal Digitaal|Animal Planet|TV
0100:07E9|Canal Digitaal|Eurosport|TV
0100:07EE|Canal Digitaal|Cartoon Network/TCM|TV
0100:07F3|Canal Digitaal|RTL8 SD|TV
0100:07F9|Canal Digitaal|Hallmark Channel|TV
0100:07FD|Canal Digitaal|Dorcel TV|TV
0100:4F62|Canal Digitaal|XXX Xtreme|TV
0100:4F8E|Canal Digitaal|Eurosport 2|TV
0100:0FA5|Canal Digitaal|Film1.1|TV
0100:0FA6|Canal Digitaal|Sport1|TV
0100:0FA7|Canal Digitaal|Film1.2|TV
0100:0FAB|Canal Digitaal|Ned1 SD|TV
0100:0FAC|Canal Digitaal|Ned2 SD|TV
0100:0FAD|Canal Digitaal|Ned3 SD|TV
0100:0FAE|Canal Digitaal|Nick/Comedy Central|TV
0100:0FAF|Canal Digitaal|National Geographic|TV
0100:138C|Canal Digitaal|Net5 SD|TV
0100:138D|Canal Digitaal|SBS6 SD|TV
0100:1397|Canal Digitaal|TMF|TV
0100:139C|Canal Digitaal|Veronica/DisneyXD SD|TV
0100:139F|Canal Digitaal|MGM Channel|TV
0100:13A4|Canal Digitaal|Film1.3|TV
0100:13A5|Canal Digitaal|Comedy Central|TV
0100:13A6|Canal Digitaal|Eredivisie Live1|TV
0100:3335|Canal Digitaal|ESPN America|TV
0100:31E7|Canal Digitaal|Één SD|TV
0100:31E8|Canal Digitaal|Ketnet/Canvas SD|TV
0100:31F4|Canal Digitaal|Man-X|TV
0100:0FCF|Canal Digitaal|Radio 4 Surround|Radio
0100:13A8|Canal Digitaal|Radio 2|Radio
0100:13A9|Canal Digitaal|3FM|Radio
0100:13AB|Canal Digitaal|Radio 5|Radio
0100:31EA|Canal Digitaal|VRT Radio 1|Radio
0100:31EB|Canal Digitaal|VRT Radio 2|Radio
0100:31EC|Canal Digitaal|MNM|Radio
0100:31ED|Canal Digitaal|Studio Brussel|Radio
0100:31EE|Canal Digitaal|Klara|Radio
0100:177F|Canal Digitaal|Holland Doc 24|TV
0100:1784|Canal Digitaal|Consumenten 24|TV
0100:1789|Canal Digitaal|Humor 24/Nost.Net|TV
0100:1793|Canal Digitaal|Boomerang|TV
0100:1798|Canal Digitaal|Discovery Science|TV
0100:179D|Canal Digitaal|Discovery Travel & Living|TV
0100:17A2|Canal Digitaal|Het Gesprek|TV
0100:17AC|Canal Digitaal|Body in Balance|TV
0100:17B1|Canal Digitaal|E! Entertainement|TV
0100:17C0|Canal Digitaal|Ned2 HD|TV
0100:17CA|Canal Digitaal|SBS6 HD|TV
0100:13AE|Canal Digitaal|Nat Geo Wild|TV
0100:13BA|Canal Digitaal|Retro Music TV|TV
0100:1B62|Canal Digitaal|Discovery HD|TV
0100:1B67|Canal Digitaal|NGC HD|TV
0100:1B6C|Canal Digitaal|RTL4 HD|TV
0100:1B71|Canal Digitaal|Brava HDTV|TV
0100:1B7B|Canal Digitaal|Ned1 HD|TV
0100:5156|Canal Digitaal|History|TV
0100:5158|Canal Digitaal|Sport1.2/Eredivisie Live2|TV
0100:13B1|Canal Digitaal|Eurosport HD|TV
0100:13B2|Canal Digitaal|History HD|TV
0100:51AE|Canal Digitaal|Film1.2|TV
0100:51B3|Canal Digitaal|Film1.3|TV
0100:51B8|Canal Digitaal|Film1 Action|TV
0100:51BD|Canal Digitaal|Sport1|TV
0100:51C2|Canal Digitaal|Sport1.2|TV
0100:51C7|Canal Digitaal|Car Channel|TV
0100:51D6|Canal Digitaal|Ned3 HD|TV
0100:51DB|Canal Digitaal|Film1 HD|TV
0100:51E0|Canal Digitaal|Sport1 HD|TV
0100:5212|Canal Digitaal|RTL7 HD|TV
0100:5217|Canal Digitaal|RTL5 HD|TV
0100:521C|Canal Digitaal|Net5 HD|TV
0100:5221|Canal Digitaal|Één HD|TV
0100:5226|Canal Digitaal|Ketnet/Canvas HD|TV
0100:522B|Canal Digitaal|Veronica/DisneyXD HD|TV
0100:4F7E|Canal Digitaal|Bebe TV|TV
0100:6FEF|Canal Digitaal|MTV Dance|TV
0100:6FF0|Canal Digitaal|VH1|TV
0100:6FF1|Canal Digitaal|VH1 Classic|TV
0100:6FF3|Canal Digitaal|MTV Rocks|TV
0100:6FB8|Canal Digitaal|MTVN HD|TV
0100:1F47|Canal Digitaal|Mezzo|TV
0100:6FFF|Canal Digitaal|MTV Music|TV
0100:7007|Canal Digitaal|MTV NL|TV
0100:2525|Canal Digitaal|Motors TV|TV
0100:4F50|Canal Digitaal|JimJam|TV
0100:4F55|Canal Digitaal|Hustler TV|TV
0100:4F56|Canal Digitaal|Zone Reality|TV
0100:4F57|Canal Digitaal|Extreme Sports|TV
0100:219F|Canal Digitaal|Yacht & Sail|TV
0100:07D4|Canal Digitaal|RTL4 SD|TV
0100:07D5|Canal Digitaal|RTL5 SD|TV
0100:07D6|Canal Digitaal|RTL7 SD|TV
0100:07DA|Canal Digitaal|TV Oranje|TV
0100:07DF|Canal Digitaal|Discovery|TV
0100:07E4|Canal Digitaal|Animal Planet|TV
0100:07E9|Canal Digitaal|Eurosport|TV
0100:07EE|Canal Digitaal|Cartoon Network/TCM|TV
0100:07F3|Canal Digitaal|RTL8 SD|TV
0100:07F9|Canal Digitaal|Hallmark Channel|TV
0100:07FD|Canal Digitaal|Dorcel TV|TV
0100:4F62|Canal Digitaal|XXX Xtreme|TV
0100:4F8E|Canal Digitaal|Eurosport 2|TV
0100:0FA5|Canal Digitaal|Film1.1|TV
0100:0FA6|Canal Digitaal|Sport1|TV
0100:0FA7|Canal Digitaal|Film1.2|TV
0100:0FAB|Canal Digitaal|Ned1 SD|TV
0100:0FAC|Canal Digitaal|Ned2 SD|TV
0100:0FAD|Canal Digitaal|Ned3 SD|TV
0100:0FAE|Canal Digitaal|Nick/Comedy Central|TV
0100:0FAF|Canal Digitaal|National Geographic|TV
0100:138C|Canal Digitaal|Net5 SD|TV
0100:138D|Canal Digitaal|SBS6 SD|TV
0100:1397|Canal Digitaal|TMF|TV
0100:139C|Canal Digitaal|Veronica/DisneyXD SD|TV
0100:139F|Canal Digitaal|MGM Channel|TV
0100:13A4|Canal Digitaal|Film1.3|TV
0100:13A5|Canal Digitaal|Comedy Central|TV
0100:13A6|Canal Digitaal|Eredivisie Live1|TV
0100:3335|Canal Digitaal|ESPN America|TV
0100:31E7|Canal Digitaal|Één SD|TV
0100:31E8|Canal Digitaal|Ketnet/Canvas SD|TV
0100:31F4|Canal Digitaal|Man-X|TV
0100:0FCF|Canal Digitaal|Radio 4 Surround|Radio
0100:13A8|Canal Digitaal|Radio 2|Radio
0100:13A9|Canal Digitaal|3FM|Radio
0100:13AB|Canal Digitaal|Radio 5|Radio
0100:31EA|Canal Digitaal|VRT Radio 1|Radio
0100:31EB|Canal Digitaal|VRT Radio 2|Radio
0100:31EC|Canal Digitaal|MNM|Radio
0100:31ED|Canal Digitaal|Studio Brussel|Radio
0100:31EE|Canal Digitaal|Klara|Radio
oscam.dvbapi
# oscam.user generated automatically by Streamboard OSCAM 1.00-svn build #3303
# Read more:
#force = 1
#P: 0628 1
I: 1830
P: 1843 1
# Read more:
Sie müssen registriert sein, um Links zu sehen.
#force = 1
#P: 0628 1
I: 1830
P: 1843 1
newcs.xml.dm800
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around
)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
-->
<newCSconfig>
<globals>
<!-- valid value for listening-ip are:
IPv4 adress of local interface.
<listening-ip>127.0.0.1</listening-ip> -->
</globals>
<readers name="SCI">
<device>
<name>Lower Cardreader</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<cache>
<!-- valid value for emm are:
0-255 - Number of EMM's to cache. -->
<emm>20</emm>
<!-- valid value for ecm are:
0-255 - Number of ECM's to cache.
-1 - Dynamic ECM Cache. -->
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<name>newcs</name>
<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->
<password>newcs</password>
<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<!-- valid value for password:
Max 25 characters and minimum 8, this is case-sensitive. -->
<password>NewCSpwd</password>
<!-- valid value for mode:
simple, advanced - Set TCP-Console to advanced mode to get access to
potentially dangerous features.-->
<mode>simple</mode>
<!-- valid value for level are:
normal, verbose, spam - How extensive debug should be. -->
<level>normal</level>
<!-- valid value for type are:
Init, general, ecm, emm, net, all - Section of debug that should be displayed. -->
<type>general</type>
<!-- valid value for output are:
Console, udp, tcp, file, all - Where to show debug. -->
<output>console,tcp</output>
<!-- console_options are so you can set own loglevel/type for console-logger:
Should hold level and type-tags like above. -->
<console_options>normal,init</console_options>
<!-- valid value for logfile are:
Path and filename - Where to write debug logs if file or all is chosed in output. -->
<logfile>/hdd/newcs.txt</logfile>
<!-- file_options are so you can set own loglevel/type for file-logger:
Should hold level and type-tags like above. -->
<file_options>spam,all</file_options>
<!-- valid value for udp_host are:
IP-address or DNS-name - Where to send debug if udp or all is chosed in output. -->
<udp_host>192.168.1.10</udp_host>
<!-- valid value for udp_port are:
0,65535 - Which port to send the udp packets. -->
<udp_port>1000</udp_port>
<!-- udp_options are so you can set own loglevel/type for udp-logger:
Should hold level and type-tags like above. -->
<udp_options>normal,init</udp_options>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<tcp_port>1001</tcp_port>
<!-- tcp_options are so you can set own loglevel/type for tcp-logger:
Should hold level and type-tags like above. -->
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<!-- valid value for enabled are:
Yes, No - Enable or Disable newcamd server. -->
<enabled>Yes</enabled>
<!-- valid value for name are:
Any name - Used to identify server to remote clients,
if the remote client isnt newcamd, this field have no purpouse. -->
<name>newcs</name>
<!-- valid value for deskey are:
any 14x2 numbers - Used to encrypt the communication between
the client and the server. -->
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<!-- Notes about users:
The first user doesnt have au without beeing it set to on (unlike newcamd cardserver).
You can add as many user-sections as you want, just put them under eachother. -->
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>dummy</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>dummy</password>
<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
<port>21000</port>
<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<au>on</au>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<sidoverride>off</sidoverride>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<spider>No</spider>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<cardlevel>1</cardlevel>
</user>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>mpcs</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>dummy</password>
<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
<port>21000</port>
<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<au>on</au>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<sidoverride>off</sidoverride>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<spider>No</spider>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<cardlevel>1</cardlevel>
</user>
</newcamdserver>
<chameleon2>
<server>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- enable or disable the server, valid values are yes/no -->
<enabled>No</enabled>
</server>
<peer> <!-- Connect to remote Chamelon server with the below credentials -->
<hostname>localhost</hostname>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<realm>myShares</realm>
</peer>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<realm>myShares</realm>
</user>
</chameleon2>
</newCSconfig>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around

The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
-->
<newCSconfig>
<globals>
<!-- valid value for listening-ip are:
IPv4 adress of local interface.
<listening-ip>127.0.0.1</listening-ip> -->
</globals>
<readers name="SCI">
<device>
<name>Lower Cardreader</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<cache>
<!-- valid value for emm are:
0-255 - Number of EMM's to cache. -->
<emm>20</emm>
<!-- valid value for ecm are:
0-255 - Number of ECM's to cache.
-1 - Dynamic ECM Cache. -->
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<name>newcs</name>
<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->
<password>newcs</password>
<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<!-- valid value for password:
Max 25 characters and minimum 8, this is case-sensitive. -->
<password>NewCSpwd</password>
<!-- valid value for mode:
simple, advanced - Set TCP-Console to advanced mode to get access to
potentially dangerous features.-->
<mode>simple</mode>
<!-- valid value for level are:
normal, verbose, spam - How extensive debug should be. -->
<level>normal</level>
<!-- valid value for type are:
Init, general, ecm, emm, net, all - Section of debug that should be displayed. -->
<type>general</type>
<!-- valid value for output are:
Console, udp, tcp, file, all - Where to show debug. -->
<output>console,tcp</output>
<!-- console_options are so you can set own loglevel/type for console-logger:
Should hold level and type-tags like above. -->
<console_options>normal,init</console_options>
<!-- valid value for logfile are:
Path and filename - Where to write debug logs if file or all is chosed in output. -->
<logfile>/hdd/newcs.txt</logfile>
<!-- file_options are so you can set own loglevel/type for file-logger:
Should hold level and type-tags like above. -->
<file_options>spam,all</file_options>
<!-- valid value for udp_host are:
IP-address or DNS-name - Where to send debug if udp or all is chosed in output. -->
<udp_host>192.168.1.10</udp_host>
<!-- valid value for udp_port are:
0,65535 - Which port to send the udp packets. -->
<udp_port>1000</udp_port>
<!-- udp_options are so you can set own loglevel/type for udp-logger:
Should hold level and type-tags like above. -->
<udp_options>normal,init</udp_options>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<tcp_port>1001</tcp_port>
<!-- tcp_options are so you can set own loglevel/type for tcp-logger:
Should hold level and type-tags like above. -->
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<!-- valid value for enabled are:
Yes, No - Enable or Disable newcamd server. -->
<enabled>Yes</enabled>
<!-- valid value for name are:
Any name - Used to identify server to remote clients,
if the remote client isnt newcamd, this field have no purpouse. -->
<name>newcs</name>
<!-- valid value for deskey are:
any 14x2 numbers - Used to encrypt the communication between
the client and the server. -->
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<!-- Notes about users:
The first user doesnt have au without beeing it set to on (unlike newcamd cardserver).
You can add as many user-sections as you want, just put them under eachother. -->
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>dummy</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>dummy</password>
<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
<port>21000</port>
<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<au>on</au>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<sidoverride>off</sidoverride>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<spider>No</spider>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<cardlevel>1</cardlevel>
</user>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>mpcs</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>dummy</password>
<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
<port>21000</port>
<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<au>on</au>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<sidoverride>off</sidoverride>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<spider>No</spider>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<cardlevel>1</cardlevel>
</user>
</newcamdserver>
<chameleon2>
<server>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- enable or disable the server, valid values are yes/no -->
<enabled>No</enabled>
</server>
<peer> <!-- Connect to remote Chamelon server with the below credentials -->
<hostname>localhost</hostname>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<realm>myShares</realm>
</peer>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<realm>myShares</realm>
</user>
</chameleon2>
</newCSconfig>
newcs.xml
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around
)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
-->
<newCSconfig>
<globals>
<!-- valid value for listening-ip are:
IPv4 adress of local interface.
<listening-ip>127.0.0.1</listening-ip> -->
</globals>
<readers name="SCI">
<device>
<name>Lower Cardreader</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<device>
<name>Upper Cardreader</name>
<type>sci</type>
<mhz>358</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<!-- valid value for enable are:
Yes, No - Enable or Disable radegast server. -->
<enabled>No</enabled>
<!-- valid value for port are:
0,65535 - Which port to listen for incomming connections. -->
<port>10001</port>
<allow>
<!-- valid value for hostname are:
all, IP-address or DNS-name. -->
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<!-- valid value for emm are:
0-255 - Number of EMM's to cache. -->
<emm>20</emm>
<!-- valid value for ecm are:
0-255 - Number of ECM's to cache.
-1 - Dynamic ECM Cache. -->
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<name>newcs</name>
<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->
<password>newcs</password>
<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<!-- valid value for password:
Max 25 characters and minimum 8, this is case-sensitive. -->
<password>NewCSpwd</password>
<!-- valid value for mode:
simple, advanced - Set TCP-Console to advanced mode to get access to
potentially dangerous features.-->
<mode>simple</mode>
<!-- valid value for level are:
normal, verbose, spam - How extensive debug should be. -->
<level>normal</level>
<!-- valid value for type are:
Init, general, ecm, emm, net, all - Section of debug that should be displayed. -->
<type>general</type>
<!-- valid value for output are:
Console, udp, tcp, file, all - Where to show debug. -->
<output>console,tcp</output>
<!-- console_options are so you can set own loglevel/type for console-logger:
Should hold level and type-tags like above. -->
<console_options>normal,init</console_options>
<!-- valid value for logfile are:
Path and filename - Where to write debug logs if file or all is chosed in output. -->
<logfile>/hdd/newcs.txt</logfile>
<!-- file_options are so you can set own loglevel/type for file-logger:
Should hold level and type-tags like above. -->
<file_options>spam,all</file_options>
<!-- valid value for udp_host are:
IP-address or DNS-name - Where to send debug if udp or all is chosed in output. -->
<udp_host>192.168.1.10</udp_host>
<!-- valid value for udp_port are:
0,65535 - Which port to send the udp packets. -->
<udp_port>1000</udp_port>
<!-- udp_options are so you can set own loglevel/type for udp-logger:
Should hold level and type-tags like above. -->
<udp_options>normal,init</udp_options>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<tcp_port>1001</tcp_port>
<!-- tcp_options are so you can set own loglevel/type for tcp-logger:
Should hold level and type-tags like above. -->
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<!-- valid value for enabled are:
Yes, No - Enable or Disable newcamd server. -->
<enabled>Yes</enabled>
<!-- valid value for name are:
Any name - Used to identify server to remote clients,
if the remote client isnt newcamd, this field have no purpouse. -->
<name>newcs</name>
<!-- valid value for deskey are:
any 14x2 numbers - Used to encrypt the communication between
the client and the server. -->
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<!-- Notes about users:
The first user doesnt have au without beeing it set to on (unlike newcamd cardserver).
You can add as many user-sections as you want, just put them under eachother. -->
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>dummy</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>dummy</password>
<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
<port>21000</port>
<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<au>on</au>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<sidoverride>off</sidoverride>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<spider>No</spider>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<cardlevel>1</cardlevel>
</user>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>mpcs</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>dummy</password>
<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
<port>21000</port>
<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<au>on</au>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<sidoverride>off</sidoverride>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<spider>No</spider>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<cardlevel>1</cardlevel>
</user>
</newcamdserver>
<chameleon2>
<server>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- enable or disable the server, valid values are yes/no -->
<enabled>No</enabled>
</server>
<peer> <!-- Connect to remote Chamelon server with the below credentials -->
<hostname>localhost</hostname>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<realm>myShares</realm>
</peer>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<realm>myShares</realm>
</user>
</chameleon2>
</newCSconfig>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around

The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
-->
<newCSconfig>
<globals>
<!-- valid value for listening-ip are:
IPv4 adress of local interface.
<listening-ip>127.0.0.1</listening-ip> -->
</globals>
<readers name="SCI">
<device>
<name>Lower Cardreader</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<device>
<name>Upper Cardreader</name>
<type>sci</type>
<mhz>358</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<!-- valid value for enable are:
Yes, No - Enable or Disable radegast server. -->
<enabled>No</enabled>
<!-- valid value for port are:
0,65535 - Which port to listen for incomming connections. -->
<port>10001</port>
<allow>
<!-- valid value for hostname are:
all, IP-address or DNS-name. -->
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<!-- valid value for emm are:
0-255 - Number of EMM's to cache. -->
<emm>20</emm>
<!-- valid value for ecm are:
0-255 - Number of ECM's to cache.
-1 - Dynamic ECM Cache. -->
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<name>newcs</name>
<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->
<password>newcs</password>
<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<!-- valid value for password:
Max 25 characters and minimum 8, this is case-sensitive. -->
<password>NewCSpwd</password>
<!-- valid value for mode:
simple, advanced - Set TCP-Console to advanced mode to get access to
potentially dangerous features.-->
<mode>simple</mode>
<!-- valid value for level are:
normal, verbose, spam - How extensive debug should be. -->
<level>normal</level>
<!-- valid value for type are:
Init, general, ecm, emm, net, all - Section of debug that should be displayed. -->
<type>general</type>
<!-- valid value for output are:
Console, udp, tcp, file, all - Where to show debug. -->
<output>console,tcp</output>
<!-- console_options are so you can set own loglevel/type for console-logger:
Should hold level and type-tags like above. -->
<console_options>normal,init</console_options>
<!-- valid value for logfile are:
Path and filename - Where to write debug logs if file or all is chosed in output. -->
<logfile>/hdd/newcs.txt</logfile>
<!-- file_options are so you can set own loglevel/type for file-logger:
Should hold level and type-tags like above. -->
<file_options>spam,all</file_options>
<!-- valid value for udp_host are:
IP-address or DNS-name - Where to send debug if udp or all is chosed in output. -->
<udp_host>192.168.1.10</udp_host>
<!-- valid value for udp_port are:
0,65535 - Which port to send the udp packets. -->
<udp_port>1000</udp_port>
<!-- udp_options are so you can set own loglevel/type for udp-logger:
Should hold level and type-tags like above. -->
<udp_options>normal,init</udp_options>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<tcp_port>1001</tcp_port>
<!-- tcp_options are so you can set own loglevel/type for tcp-logger:
Should hold level and type-tags like above. -->
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<!-- valid value for enabled are:
Yes, No - Enable or Disable newcamd server. -->
<enabled>Yes</enabled>
<!-- valid value for name are:
Any name - Used to identify server to remote clients,
if the remote client isnt newcamd, this field have no purpouse. -->
<name>newcs</name>
<!-- valid value for deskey are:
any 14x2 numbers - Used to encrypt the communication between
the client and the server. -->
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<!-- Notes about users:
The first user doesnt have au without beeing it set to on (unlike newcamd cardserver).
You can add as many user-sections as you want, just put them under eachother. -->
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>dummy</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>dummy</password>
<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
<port>21000</port>
<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<au>on</au>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<sidoverride>off</sidoverride>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<spider>No</spider>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<cardlevel>1</cardlevel>
</user>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>mpcs</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>dummy</password>
<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
<port>21000</port>
<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<au>on</au>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<sidoverride>off</sidoverride>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<spider>No</spider>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<cardlevel>1</cardlevel>
</user>
</newcamdserver>
<chameleon2>
<server>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- enable or disable the server, valid values are yes/no -->
<enabled>No</enabled>
</server>
<peer> <!-- Connect to remote Chamelon server with the below credentials -->
<hostname>localhost</hostname>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<realm>myShares</realm>
</peer>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<realm>myShares</realm>
</user>
</chameleon2>
</newCSconfig>
CCcam.cfg
C:
N: 127.0.0.1 24000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 24000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Auszug aus dem WEBif
OSCAM 1.20-unstable_svn build #5882
[TABLE="class: menu"]
[TR]
[TD]
[TD]
[TD]
[TD]
[TD]
[TD]
[TD]
[TD="class: script"]
[TD="class: shutdown"]
[/TR]
[/TABLE]
[TABLE="class: status"]
[TR]
[/TR]
[TR="class: s"]
[TD="class: statuscol0"]
[TD="class: statuscol1"]0x53fe98[/TD]
[TD="class: statuscol2"]s[/TD]
[TD="class: statuscol3"]0[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]server[/TD]
[TD="class: statuscol10"]05.11.11 22:00:24[/TD]
[TD="class: statuscol11"]10:38:52[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]10:38:52[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR="class: h"]
[TD="class: statuscol0"]
[TD="class: statuscol1"]0x54c1f8[/TD]
[TD="class: statuscol2"]h[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]http[/TD]
[TD="class: statuscol10"]05.11.11 22:00:24[/TD]
[TD="class: statuscol11"]10:38:52[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:14:58[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Readers 0/1[/TD]
[/TR]
[TR="class: r"]
[TD="class: statuscol0"]
[TD="class: statuscol1"]0x54aa00[/TD]
[TD="class: statuscol2"]r[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]kabel[/TD]
[TD="class: statuscol5"]
[TD="class: statuscol6"]OFF[/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]internal[/TD]
[TD="class: statuscol10"][/TD]
[TD="class: statuscol11"][/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"]
[TD="class: statuscol15"]10:38:52[/TD]
[TD="class: statuscol16"]UNKNOWN
[/TR]
[/TABLE]
2011/11/06 8:11:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:12:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:12:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:13:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:13:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:14:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:14:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:15:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:15:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:16:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:16:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:17:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:17:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:18:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:18:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:19:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:19:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:20:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:20:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:21:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:21:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:22:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:22:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:23:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:23:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:24:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:24:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:25:08 54C1F8 h Restart requested by WebIF from 192.168.178.20
2011/11/06 8:25:08 54C1F8 h restart oscam requested
2011/11/06 8:25:09 54C1F8 h HTTP Server: Shutdown requested.
2011/11/06 8:25:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:25:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:26:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:26:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:27:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:27:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:28:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:28:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:29:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:29:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:30:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:30:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:31:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:31:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:32:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:32:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:33:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:33:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:34:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:34:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:35:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:35:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:36:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:36:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:37:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:37:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:38:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:38:24 54AA00 r Cannot open device: /dev/sci0
[TABLE="class: menu"]
[TR]
[TD]
Sie müssen registriert sein, um Links zu sehen.
[/TD][TD]
Sie müssen registriert sein, um Links zu sehen.
[/TD][TD]
Sie müssen registriert sein, um Links zu sehen.
[/TD][TD]
Sie müssen registriert sein, um Links zu sehen.
[/TD][TD]
Sie müssen registriert sein, um Links zu sehen.
[/TD][TD]
Sie müssen registriert sein, um Links zu sehen.
[/TD][TD]
Sie müssen registriert sein, um Links zu sehen.
[/TD][TD="class: script"]
Sie müssen registriert sein, um Links zu sehen.
[/TD][TD="class: shutdown"]
Sie müssen registriert sein, um Links zu sehen.
[/TD][/TR]
[/TABLE]
[TABLE="class: status"]
[TR]
[/TR]
[TR="class: s"]
[TD="class: statuscol0"]
Sie müssen registriert sein, um Links zu sehen.
[/TD][TD="class: statuscol1"]0x53fe98[/TD]
[TD="class: statuscol2"]s[/TD]
[TD="class: statuscol3"]0[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]server[/TD]
[TD="class: statuscol10"]05.11.11 22:00:24[/TD]
[TD="class: statuscol11"]10:38:52[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]10:38:52[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR="class: h"]
[TD="class: statuscol0"]
Sie müssen registriert sein, um Links zu sehen.
[/TD][TD="class: statuscol1"]0x54c1f8[/TD]
[TD="class: statuscol2"]h[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]http[/TD]
[TD="class: statuscol10"]05.11.11 22:00:24[/TD]
[TD="class: statuscol11"]10:38:52[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:14:58[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Readers 0/1[/TD]
[/TR]
[TR="class: r"]
[TD="class: statuscol0"]
Sie müssen registriert sein, um Links zu sehen.
[/TD][TD="class: statuscol1"]0x54aa00[/TD]
[TD="class: statuscol2"]r[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]kabel[/TD]
[TD="class: statuscol5"]
Sie müssen registriert sein, um Links zu sehen.
[/TD][TD="class: statuscol6"]OFF[/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]internal[/TD]
[TD="class: statuscol10"][/TD]
[TD="class: statuscol11"][/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"]
Sie müssen registriert sein, um Links zu sehen.
[/TD][TD="class: statuscol15"]10:38:52[/TD]
[TD="class: statuscol16"]UNKNOWN
Sie müssen registriert sein, um Links zu sehen.
[/TD][/TR]
[/TABLE]
2011/11/06 8:11:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:12:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:12:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:13:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:13:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:14:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:14:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:15:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:15:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:16:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:16:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:17:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:17:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:18:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:18:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:19:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:19:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:20:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:20:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:21:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:21:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:22:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:22:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:23:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:23:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:24:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:24:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:25:08 54C1F8 h Restart requested by WebIF from 192.168.178.20
2011/11/06 8:25:08 54C1F8 h restart oscam requested
2011/11/06 8:25:09 54C1F8 h HTTP Server: Shutdown requested.
2011/11/06 8:25:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:25:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:26:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:26:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:27:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:27:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:28:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:28:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:29:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:29:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:30:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:30:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:31:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:31:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:32:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:32:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:33:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:33:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:34:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:34:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:35:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:35:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:36:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:36:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:37:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:37:24 54AA00 r Cannot open device: /dev/sci0
2011/11/06 8:38:24 54AA00 r ERROR opening device /dev/sci0
2011/11/06 8:38:24 54AA00 r Cannot open device: /dev/sci0
Zuletzt bearbeitet: