CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

[prangsta]

AW: CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

Du kannst in der oscam.conf am server aber nicht den gleichen port für CCcam und cs378x nutzen !
Hoffe du hast dann denn CCcam port dann mit # auskommentiert !

 

[carverman]

AW: CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

Habe jetzt diesen Teil in die oscam.conf eingefügt:

[cs378x]
port = 10111
serverip = 192.168.178.40

 

[webman2]

AW: CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

Am besten, Du postest nach den Einträgen alle Konfigs nochmal ....

 

[carverman]

AW: CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

Okay. Habe jetzt serverip raus genommen. Den cccam Teil hatte ich schon gelöscht.
Das heißt es steht jetzt nur noch

[cs378x]
port = 10111

da.

Configs schicke ich gleich.

 

[webman2]

AW: CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

So muss es sein ...

 

[carverman]

AW: CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

Hier nochmal die Daten vom Server:

oscam.conf

Spoiler

[global]
#serverip = 0.0.0.0
disablelog = 0
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
saveinithistory = 1
loghistorysize = 4096
nice = -1
clientmaxidle = 0
waitforcards = 0

[webif]
httpport = 10114
httpuser = oscam
httppwd = test4321
httphelplang = de
httprefresh = 15
httpallowed = 192.168.177.0-192.168.178.255
hideclient_to = 15

[cs378x]
port = 10222

oscam.user

Spoiler

[account]
user = user1
pwd = pass1
au = 1
group = 1

oscam.server

Spoiler

[reader]
label = V14
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

oscam.srvid

Spoiler

#OSCAM.TIERS created by Hk2k2, last change 0501152230:
# tier/chid table for OSCam (2012/04/10 OSCam-Wiki)
# Format/Syntax:
# CAID[,CAID]...:tierID|description
# CAID[,CAID]...:ChID|description
# Example:
# 0919,093B,09CD:000B|Service
# 1702,1833,1722,1834:7D22|Sky Film

# ORF CW 0D05
0D05:0001|ORF All
0D05:0010|ATV+

# ORF ICE 0D95
0D95:0001|ORF/ATV
0D95:0002|ORF/ATV
0D95:000D|ORF/ATV 30 Tage
0D95:002A|Austriasat
0D95:002B|Austriasat XXX Channels
0D95:002C|Austriasat XXX Channels
0D95:F000|ORF/ATV 30 Tage

# ORF ICE 0648
0648:0001|ORF/ATV
0648:0002|ORF/ATV
0648:000D|ORF/ATV 30 Tage
0648:0015|HD-Austria
0648:001D|HD-Austria Demo
0648:002A|Austriasat
0648:002B|Austriasat XXX Channels
0648:002C|Austriasat XXX Channels
0648:7FF7|ORF unknown
0648:7FFB|ORF unknown
0648:F000|ORF/ATV 30 Tage
0648:FFD8|ORF unknown
0648:FFE0|ORF unknown

# SKY V13/V14
09C4,098C:0046|HD+ (Gratisjahr)
09C4,098C:0047|HD-Austria
09C4,098C:0056|Sky 3D Welt
09C4,098C:0057|Sky 3D Film
09C4,098C:0058|Sky 3D Sport
09C4,098C:005A|Sky Sport HD Extra
09C4,098C:007D|Sky Sport
09C4,098C:0081|Sky Bundesliga
09C4,098C:008E|beate-uhse.tv
09C4,098C:00BC|ORF All
09C4,098C:00BD|ATV/Puls4
09C4,098C:00C0|Sky Welt Extra (Sky Welt)
09C4,098C:00C4|sportdigital
09C4,098C:00C7|Sky Welt (Sky Starter)
09C4,098C:00C8|Sky Film
09C4,098C:00C9|Sky Welt HD (Sky Welt)
09C4,098C:00CA|Sky Film HD
09C4,098C:00CB|Sky Sport HD
09C4,098C:00D4|HD+ (Abo)
09C4,098C:00E4|Sky Bundesliga HD
09C4,098C:00E5|Sky Sport HD
09C4,098C:00F3|Blue Movie Info

oscam.dvbapi ist leer


Daten vom Client

oscam.conf

Spoiler

[global]
logfile = stdout
nice = -1

[dvbapi]
enabled = 1
au = 1
user = dvbapi
boxtype = duckbox

[webif]
httpport = 16002
httpuser = oscam
httppwd =
httphelplang = de
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.user

Spoiler

[account]
user = dvbapi
au = 1
group = 1

oscam.server

Spoiler

[reader]
label = v14
protocol = cs378x
device = 192.168.178.40,10222
user = user1
password = pass1
group = 1
reconnecttimeout = 60
keepalive = 1

oscam.dvbapi

Spoiler

P: 098C 1
I:0

Habe den Port für cs378x in der oscam.conf des Servers und in der oscam.server des Client auf 10222 geändert, da ich den Port 10111 später noch für cccam benötige.

 

[prangsta]

AW: CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

Jo so müsste es fluppen !!
Try out und nen log vom start beider oscams hinter schieben hier

 

[carverman]

AW: CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

Okay.
Hier der Live Log vom Client nach Neustart:

Spoiler

• 2015/08/13 00:47:46 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10940 (sh4-streamboard-linux-gnu-stapi)
• 2015/08/13 00:47:46 00000000 s (main) System name = Linux
• 2015/08/13 00:47:46 00000000 s (main) Host name = arguspinguluxmini
• 2015/08/13 00:47:46 00000000 s (main) Release = 2.6.32.61_stm24_0217
• 2015/08/13 00:47:46 00000000 s (main) Version = #1 PREEMPT Sun Jun 21 04:03:40 CEST 2015
• 2015/08/13 00:47:46 00000000 s (main) Machine = sh4
• 2015/08/13 00:47:46 00000000 s (main) Stb model = spark
• 2015/08/13 00:47:46 00000000 s (main) Stb boxtype = spark
• 2015/08/13 00:47:46 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2727
• 2015/08/13 00:47:46 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2015/08/13 00:47:46 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2015/08/13 00:47:46 00000000 s (main) signal handling initialized
• 2015/08/13 00:47:46 00000000 s (reader) v14 [cs378x] creating thread for device 192.168.178.40
• 2015/08/13 00:47:46 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2015/08/13 00:47:46 00000000 s (main) waiting for local card init
• 2015/08/13 00:47:46 6CCC7F28 p (reader) v14 [cs378x] proxy 192.168.178.40:10111
• 2015/08/13 00:47:46 6CCC7F28 p (reader) 192.168.178.40: resolved ip=192.168.178.40
• 2015/08/13 00:47:46 6CCC7F28 p (reader) v14 [cs378x] connecting to 192.168.178.40:10111
• 2015/08/13 00:47:46 6CCC7F28 p (reader) v14 [cs378x] proxy initialized, server 192.168.178.40:10111
• 2015/08/13 00:47:46 0F6A5D03 h (webif) webif: decompressed 163435 bytes back into 391368 bytes
• 2015/08/13 00:47:46 0F6A5D03 h (webif) HTTP Server running. ip=0.0.0.0 port=16002
• 2015/08/13 00:47:46 00000000 s (main) init for all local cards done
• 2015/08/13 00:47:46 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
• 2015/08/13 00:47:46 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
• 2015/08/13 00:47:46 00000000 s (anticasc) anti cascading disabled
• 2015/08/13 00:47:46 0A20D2C0 c (client) plain dvbapi-client granted (dvbapi, au=auto (1 reader))
• 2015/08/13 00:47:46 0A20D2C0 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam.ccache
• 2015/08/13 00:47:46 0A20D2C0 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
• 2015/08/13 00:47:47 0A20D2C0 c (dvbapi) Demuxer 0 found 0 ECMpids and 9 STREAMpids in PMT
• 2015/08/13 00:47:47 0A20D2C0 c (dvbapi) Demuxer 0 serving srvid 2EE3 (FFFE@000000:2EE3 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 002C

Un der Live Log vom Server nach Neustart:

Spoiler

• 2015/08/12 22:50:52 76C039E8 r (reader) V14 [mouse] Flush readed byte Nr 16 value f0 time_us 1284
• 2015/08/12 22:50:52 76C039E8 r (reader) V14 [mouse] Flush readed byte Nr 17 value ff time_us 1299
• 2015/08/12 22:50:52 76C039E8 r (reader) V14 [mouse] Flush readed byte Nr 18 value ff time_us 33
• 2015/08/12 22:50:52 76C039E8 r (reader) V14 [mouse] Flush readed byte Nr 19 value f5 time_us 1291
• 2015/08/12 22:50:52 76C039E8 r (reader) V14 [mouse] Flush readed byte Nr 20 value 73 time_us 1301
• 2015/08/12 22:50:52 76C039E8 r (reader) V14 [mouse] Flush readed byte Nr 21 value 3f time_us 32
• 2015/08/12 22:50:52 76C06198 c (client) encrypted cs378x-client 192.168.178.41 granted (user1, au=auto (1 reader))
• 2015/08/12 22:50:52 76C039E8 r (reader) V14 [mouse] Buffers readed 21 bytes total time_us 133416
• 2015/08/12 22:50:52 76C039E8 r (reader) V14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
• 2015/08/12 22:50:52 76C039E8 r (reader) V14 [mouse] card detected
• 2015/08/12 22:50:53 76C039E8 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75149
• 2015/08/12 22:50:54 76C039E8 r (reader) V14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/08/12 22:50:54 76C039E8 r (reader) V14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
• 2015/08/12 22:50:54 76C039E8 r (reader) V14 [mouse] Setting baudrate to 153600 bps
• 2015/08/12 22:50:54 76C039E8 r (reader) V14 [mouse] Calculated work ETU is 3.88 us reader mhz = 600
• 2015/08/12 22:50:54 76C039E8 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75146
• 2015/08/12 22:50:54 76C039E8 r (reader) V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [mouse] Card type: P1TV
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [mouse] Rom version: 20AA
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [mouse] Credit available on card: 0 euro
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [mouse] Extended 4C detected
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [mouse] FuseByte: 00
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [mouse] Region Code:
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [mouse] Country Code: DEU
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [mouse] Pincode read: 5315
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [mouse] PCB settings: FF FF FF FF
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [mouse] ready for requests
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [mouse] found card system videoguard2
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [videoguard2] card detected
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [videoguard2] ------------------------------------------------------------------
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [videoguard2] +---------+----------+---------------------+---------------------+
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [videoguard2] |------- This card is not active, so no package available! ------|
• 2015/08/12 22:50:55 76C039E8 r (reader) V14 [videoguard2] ------------------------------------------------------from-ins70--
• 2015/08/12 22:51:33 F55848 h (lock) WARNING lock http_lock (WRITELOCK) timed out.

 

[webman2]

AW: CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

Poste das live-logg des clients länger, dass man den Zugriff auf die Karte sieht.

 

[carverman]

AW: CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

Ich glaube mehr kommt da nicht.
Nicht wundern ich habe den Port auf 10222 geändert. Habe ich in den Dateien in meinem vorherigen Post abgeändert.

Live Log Client

Spoiler

• 2015/08/13 01:08:34 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10940 (sh4-streamboard-linux-gnu-stapi)
• 2015/08/13 01:08:34 00000000 s (main) System name = Linux
• 2015/08/13 01:08:34 00000000 s (main) Host name = arguspinguluxmini
• 2015/08/13 01:08:34 00000000 s (main) Release = 2.6.32.61_stm24_0217
• 2015/08/13 01:08:34 00000000 s (main) Version = #1 PREEMPT Sun Jun 21 04:03:40 CEST 2015
• 2015/08/13 01:08:34 00000000 s (main) Machine = sh4
• 2015/08/13 01:08:34 00000000 s (main) Stb model = spark
• 2015/08/13 01:08:34 00000000 s (main) Stb boxtype = spark
• 2015/08/13 01:08:34 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 3966
• 2015/08/13 01:08:34 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2015/08/13 01:08:34 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2015/08/13 01:08:34 00000000 s (main) signal handling initialized
• 2015/08/13 01:08:34 00000000 s (reader) v14 [cs378x] creating thread for device 192.168.178.40
• 2015/08/13 01:08:34 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2015/08/13 01:08:34 00000000 s (main) waiting for local card init
• 2015/08/13 01:08:34 0F79C1EB p (reader) v14 [cs378x] proxy 192.168.178.40:10222
• 2015/08/13 01:08:34 0F79C1EB p (reader) 192.168.178.40: resolved ip=192.168.178.40
• 2015/08/13 01:08:34 0F79C1EB p (reader) v14 [cs378x] connecting to 192.168.178.40:10222
• 2015/08/13 01:08:34 0F79C1EB p (reader) v14 [cs378x] connect failed: Connection refused
• 2015/08/13 01:08:34 0F79C1EB p (reader) v14 [cs378x] proxy initialized, server 192.168.178.40:10222
• 2015/08/13 01:08:34 6CCC7F28 h (webif) webif: decompressed 163435 bytes back into 391368 bytes
• 2015/08/13 01:08:34 6CCC7F28 h (webif) HTTP Server running. ip=0.0.0.0 port=16002
• 2015/08/13 01:08:35 00000000 s (main) init for all local cards done
• 2015/08/13 01:08:35 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
• 2015/08/13 01:08:35 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
• 2015/08/13 01:08:35 00000000 s (anticasc) anti cascading disabled
• 2015/08/13 01:08:35 0A20D2C0 c (client) plain dvbapi-client granted (dvbapi, au=auto (1 reader))
• 2015/08/13 01:08:35 0A20D2C0 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam.ccache
• 2015/08/13 01:08:35 0A20D2C0 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
• 2015/08/13 01:08:35 0A20D2C0 c (dvbapi) Demuxer 0 found 0 ECMpids and 9 STREAMpids in PMT
• 2015/08/13 01:08:35 0A20D2C0 c (dvbapi) Demuxer 0 serving srvid 2EE3 (FFFE@000000:2EE3 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 002C
• 2015/08/13 01:09:05 0F79C1EB p (reader) v14 [cs378x] connecting to 192.168.178.40:10222

 

[webman2]

AW: CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

Connection refused ..
2015/08/13 01:08:35 0A20D2C0 c (client) plain dvbapi-client granted (dvbapi, au=auto (1 reader))
2015/08/13 01:08:34 0F79C1EB p (reader) v14 [cs378x] connecting to 192.168.178.40:10222
2015/08/13 01:08:34 0F79C1EB p (reader) v14 [cs378x] connect failed: Connection refused

 

[prangsta]

AW: CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

Das war der pingu log !
Und da connected nur der dvbapi user ?
Oder hab ich vor lauter fifa bälle auf den tomaten ?
Connection zu reader 192......... Refused

 

[webman2]

AW: CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

Hast Du den port auf dem Router freigegeben ? cs378x tcp

 

[carverman]

AW: CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

Ne auf dem Router habe ich nichts eingestellt. Was muss ich dort tun?

 

[webman2]

AW: CS Problem mit Raspberry, Easymouse, V14 und Pingulux mini als Client

IPv4 port forwarding machen