CS + Pairing DM800

[Moschi]

Hallo Leute,

ich habe schon seit Jahren 2 DM800, nun habe ich mir ein Sky Paket geleistet und möchte das gerne ins Schlafzimmer sharen ( wird dann eine v14 sein). Nun habe ich auch einiges gelesen, möchte aber vorab nochmal einige Sachen klären.

1. Ich flashe beide DMs auf die aktuelle NewEnigma2 Version.
2. Installation OSCAM -> was muss ich hier genau konfigurieren? Evtl. nehme ich noch meinen Bruder dazu, möchte aber nicht das er weiter sharen kann.
3. Muss ich ja nun alle EMMs blocken und das LOG auswerten welche für die Aktivierung der Karte sind, funktioniert die Verlängerung dann immer automatisch oder muss ich diese dann immer auslesen und manuell auf die Karte schreiben?

Da ich erst ab Dienstag wieder zuhause sind, und ich ja wie immer nicht warten kann und möchte das es natürlich schnell läuft, was kann ich schon herunterladen bzw. vorbereiten damit ich mich nicht erst zuhause damit beschäftigen muss?

Vielleicht hat ja jemand ein paar aktuelle Anleitungen, damit ich mir dann zuhause nicht alles zusammen suchen muss

Gruß Martin

 

[dodo83]

AW: CS + Pairing DM800

1. sollte schon mal passen
2. beispiel Config: https://www.digital-eliteboard.com/332945-v14-beispiel-config-fuer-dreambox-und-igel-raspi.html
bezüglich weiter sharen: ist doch dein Bruder, sag es ihm doch, ansonsten reshare auf 0
3. Verlängerung musst du natürlich auch manuell schreiben (1 EMM), du blockst ja alles

hier mal alles notwendige: https://www.digital-eliteboard.com/326090-faq-rund-um-sky-v13-v14-pairing.html

 

[Moschi]

AW: CS + Pairing DM800

Hi,

bin gerade bei der Oscam Installation, benötige ich startup scripte?

 

[dodo83]

AW: CS + Pairing DM800

normalerweise werden die Scripte mit Installiert wenn man Oscam vom Feed lädt

 

[Moschi]

AW: CS + Pairing DM800

da bekomme ich aber nicht die aktuellste Version, zumindest sehe ich die da nicht. Sehe da immer nur Oscam RC 1.10 version 6098 und eine neuere unstable 9787

 

[Moschi]

AW: CS + Pairing DM800

habe jetzt die unstable 9787 genommen, bei der dm800HD müsste doch der KartenSlot sci0 sein oder?

Hier mal meine Configs, bitte mal drüber schauen bevor ich starte.

oscam.server

Spoiler

[reader]
label = v14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
autospeed = 1
cardmhz = 2700
group = 1
emmcache = 1,3,15
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

oscam.config

Spoiler

[global]
logfile = /var/cache/oscam.log
disableuserfile = 0
clienttimeout = 900000
fallbacktimeout = 4900
clientmaxidle = 60
bindwait = 20
netprio = 0
nice = -1
maxlogsize = 100
preferlocalcards = 1
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
pmt_mode = 0
decodeforever = 1
[webif]
httpport = meinhttpport
httpuser = meinUser
httppwd = meinPW
httprefresh = 10
httpallowed = 127.0.0.1,192.168.1.1-192.168.255.255,0.0.0.0-255.255.255.255
httpdyndns = meinedyndnsIP
[cache]
Delay = 120

oscam.user

Spoiler

[account]
user = local
group = 1
au = 1

Wenn alles passt, nun die Karte die den Reci, auf der SKY Homepage die Aktivierung starten, richtig? Danach in den Logs nach dem Aktivierungs emm suchen?

Gruß Martin

 

[dodo83]

AW: CS + Pairing DM800

erstmal gucken ob die Karte eingelesen wird
soweit sieht die Config OK aus
die OScam würde ich auf eine Version ab 9848 manuell updaten, da wurden Probleme mit Freezern bei der V14 behoben

 

[Moschi]

AW: CS + Pairing DM800

ist sci0 auch richtig? Ich bekomme im LiveLog immer diese Fehlermeldung

no suitable readers found that can be used for decoding!

Updaten kann ich dann später machen

Gruß Martin

 

[dodo83]

AW: CS + Pairing DM800

poste mal das ganze log ab oscam start dann kann man dir dazu was sagen, aus der kurzen Fehlermeldung nicht

 

[Alex]

AW: CS + Pairing DM800

Zeig doch mal das ganze Start-Log

 

[Moschi]

AW: CS + Pairing DM800

startlog = oscam.log?

 

[Alex]

AW: CS + Pairing DM800

Ja genau ein und aus dem oscam.log halt den Start von Oscam mit einlesen der Karte usw.

 

[Moschi]

AW: CS + Pairing DM800

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Dec 31 10:35:41 2014
-------------------------------------------------------------------------------
2014/12/31 10:35:41 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9787 (mipsel-oe-linux)
2014/12/31 10:35:41 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1349
2014/12/31 10:35:41 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/12/31 10:35:41 0 s signal handling initialized
2014/12/31 10:35:41 0 s v14 [internal] creating thread for device /dev/sci0
2014/12/31 10:35:41 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/12/31 10:35:41 0 s waiting for local card init
2014/12/31 10:35:41 534D68 r v14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2014/12/31 10:35:41 536B98 h webif: decompressed 151082 bytes back into 360672 bytes
2014/12/31 10:35:41 536B98 h HTTP Server running. ip=0.0.0.0 port=8080
2014/12/31 10:35:43 0 s init for all local cards done
2014/12/31 10:35:43 0 s anti cascading disabled
2014/12/31 10:35:43 53D280 c plain dvbapi-client granted (local, au=auto (1 reader))
2014/12/31 10:35:43 53D280 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/12/31 10:35:44 53D280 c Found 0 ECMpids and 5 STREAMpids in PMT
2014/12/31 10:35:44 53D280 c [DVBAPI] Receiver wants to demux srvid 2EF4 on adapter 0000 camask 0008 index 0003 pmtpid 002E
2014/12/31 10:35:44 53D280 c New program number: 2EF4 (FFFE:2EF4 unknown) [pmt_list_management 3]
2014/12/31 10:41:58 536B98 h Refresh Server requested by WebIF from 192.168.2.36
2014/12/31 11:00:06 534D68 r v14 [internal] card detected
2014/12/31 11:00:07 534D68 r v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/12/31 11:00:07 534D68 r v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/12/31 11:00:07 534D68 r v14 [internal] TEST tempo mhz check = 500 mhz
2014/12/31 11:00:07 534D68 r v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2014/12/31 11:00:07 534D68 r v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/12/31 11:00:08 534D68 r v14 [internal] Card type: P1TV
2014/12/31 11:00:08 534D68 r v14 [internal] Rom version: 20AA
2014/12/31 11:00:08 534D68 r v14 [internal] Credit available on card: 0 euro
2014/12/31 11:00:08 534D68 r v14 [internal] Extended 4C detected
2014/12/31 11:00:08 534D68 r v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2014/12/31 11:00:08 534D68 r v14 [internal] found card system videoguard2
2014/12/31 11:00:08 534D68 r v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/12/31 11:00:08 534D68 r v14 [videoguard2] card detected
2014/12/31 11:00:08 534D68 r v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/12/31 11:00:09 534D68 r v14 [videoguard2] creating thread for device /dev/sci0
2014/12/31 11:00:09 5426D8 r v14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2014/12/31 11:00:10 5426D8 r v14 [videoguard2] card detected
2014/12/31 11:00:10 5426D8 r v14 [internal] Doing fast reset
2014/12/31 11:00:11 5426D8 r v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/12/31 11:00:11 5426D8 r v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/12/31 11:00:11 5426D8 r v14 [internal] TEST tempo mhz check = 500 mhz
2014/12/31 11:00:11 5426D8 r v14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2014/12/31 11:00:11 5426D8 r v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/12/31 11:00:12 5426D8 r v14 [internal] Card type: P1TV
2014/12/31 11:00:12 5426D8 r v14 [internal] Rom version: 20AA
2014/12/31 11:00:12 5426D8 r v14 [internal] Credit available on card: 0 euro
2014/12/31 11:00:12 5426D8 r v14 [internal] Extended 4C detected
2014/12/31 11:00:12 5426D8 r v14 [internal] FuseByte: 00
2014/12/31 11:00:12 5426D8 r v14 [internal] Region Code:
2014/12/31 11:00:12 5426D8 r v14 [internal] Pincode read: 6986
2014/12/31 11:00:12 5426D8 r v14 [internal] PCB settings: FF FF FF FF
2014/12/31 11:00:12 5426D8 r v14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/12/31 11:00:12 5426D8 r v14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2014/12/31 11:00:12 5426D8 r v14 [internal] ready for requests
2014/12/31 11:00:12 5426D8 r v14 [internal] found card system videoguard2
2014/12/31 11:00:12 5426D8 r v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/12/31 11:00:12 5426D8 r v14 [videoguard2] card detected
2014/12/31 11:00:12 5426D8 r v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/12/31 11:01:31 5426D8 r v14 [videoguard2] card detected
2014/12/31 11:01:31 5426D8 r v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/12/31 11:01:38 5426D8 r v14 [videoguard2] card detected
2014/12/31 11:01:38 5426D8 r v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/12/31 11:02:18 5426D8 r v14 [videoguard2] card ejected
2014/12/31 11:05:37 5426D8 r v14 [internal] card detected
2014/12/31 11:05:38 5426D8 r v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/12/31 11:05:38 5426D8 r v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/12/31 11:05:38 5426D8 r v14 [internal] TEST tempo mhz check = 500 mhz
2014/12/31 11:05:38 5426D8 r v14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2014/12/31 11:05:38 5426D8 r v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/12/31 11:05:39 5426D8 r v14 [internal] Card type: P1TV
2014/12/31 11:05:39 5426D8 r v14 [internal] Rom version: 20AA
2014/12/31 11:05:39 5426D8 r v14 [internal] Credit available on card: 0 euro
2014/12/31 11:05:39 5426D8 r v14 [internal] Extended 4C detected
2014/12/31 11:05:39 5426D8 r v14 [internal] FuseByte: 00
2014/12/31 11:05:39 5426D8 r v14 [internal] Region Code:
2014/12/31 11:05:40 5426D8 r v14 [internal] Pincode read: 6986
2014/12/31 11:05:40 5426D8 r v14 [internal] PCB settings: FF FF FF FF
2014/12/31 11:05:40 5426D8 r v14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/12/31 11:05:40 5426D8 r v14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2014/12/31 11:05:40 5426D8 r v14 [internal] ready for requests
2014/12/31 11:05:40 5426D8 r v14 [internal] found card system videoguard2
2014/12/31 11:05:40 5426D8 r v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/12/31 11:05:40 5426D8 r v14 [videoguard2] card detected
2014/12/31 11:05:40 5426D8 r v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/12/31 11:11:15 536B98 h v14 [videoguard2] Restarting reader
2014/12/31 11:11:15 536B98 h v14 [videoguard2] creating thread for device /dev/sci0
2014/12/31 11:11:15 54C450 r v14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2014/12/31 11:11:15 54C450 r v14 [videoguard2] card detected
2014/12/31 11:11:17 54C450 r v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/12/31 11:11:17 54C450 r v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/12/31 11:11:17 54C450 r v14 [internal] TEST tempo mhz check = 500 mhz
2014/12/31 11:11:17 54C450 r v14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2014/12/31 11:11:17 54C450 r v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/12/31 11:11:18 54C450 r v14 [internal] Card type: P1TV
2014/12/31 11:11:18 54C450 r v14 [internal] Rom version: 20AA
2014/12/31 11:11:18 54C450 r v14 [internal] Credit available on card: 0 euro
2014/12/31 11:11:18 54C450 r v14 [internal] Extended 4C detected
2014/12/31 11:11:18 54C450 r v14 [internal] FuseByte: 00
2014/12/31 11:11:18 54C450 r v14 [internal] Region Code:
2014/12/31 11:11:18 54C450 r v14 [internal] Pincode read: 6986
2014/12/31 11:11:18 54C450 r v14 [internal] PCB settings: FF FF FF FF
2014/12/31 11:11:18 54C450 r v14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/12/31 11:11:18 54C450 r v14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2014/12/31 11:11:18 54C450 r v14 [internal] ready for requests
2014/12/31 11:11:18 54C450 r v14 [internal] found card system videoguard2
2014/12/31 11:11:18 54C450 r v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/12/31 11:11:18 54C450 r v14 [videoguard2] card detected
2014/12/31 11:11:18 54C450 r v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/12/31 11:11:40 536B98 h Stopping log...


-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Wed Dec 31 11:11:40 2014
-------------------------------------------------------------------------------
2014/12/31 11:11:40 536B98 h >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r9787 (mipsel-oe-linux)
2014/12/31 11:11:40 536B98 h Refresh Server requested by WebIF from 192.168.2.100
2014/12/31 11:11:47 536B98 h v14 [videoguard2] Restarting reader
2014/12/31 11:11:47 536B98 h v14 [videoguard2] creating thread for device /dev/sci0
2014/12/31 11:11:47 550830 r v14 [videoguard2] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2014/12/31 11:11:47 550830 r v14 [videoguard2] Cannot open device: /dev/sci0
2014/12/31 11:12:47 550830 r v14 [videoguard2] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2014/12/31 11:12:47 550830 r v14 [videoguard2] Cannot open device: /dev/sci0
2014/12/31 11:13:43 53D280 c [ADD PID 0] CAID: 1833 ECM_PID: 18BA PROVID: 000000
2014/12/31 11:13:43 53D280 c [ADD PID 1] CAID: 09C4 ECM_PID: 1BBA PROVID: 000000
2014/12/31 11:13:43 53D280 c [ADD PID 2] CAID: 09AF ECM_PID: 1FBA PROVID: 000000
2014/12/31 11:13:43 53D280 c [ADD PID 3] CAID: 098C ECM_PID: 1ABA PROVID: 000000
2014/12/31 11:13:43 53D280 c Found 4 ECMpids and 5 STREAMpids in PMT
2014/12/31 11:13:43 53D280 c [DVBAPI] Receiver wants to demux srvid 0081 on adapter 0000 camask 0008 index 0003 pmtpid 0062
2014/12/31 11:13:43 53D280 c New program number: 0081 (1833:0081 unknown) [pmt_list_management 3]
2014/12/31 11:13:43 53D280 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/31 11:13:43 53D280 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/12/31 11:13:43 53D280 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/31 11:13:43 53D280 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/12/31 11:13:45 53D280 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/31 11:13:45 53D280 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/12/31 11:13:45 53D280 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/31 11:13:45 53D280 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/12/31 11:13:46 53D280 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/31 11:13:46 53D280 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/12/31 11:13:46 53D280 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/31 11:13:47 53D280 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/12/31 11:13:47 53D280 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/31 11:13:47 53D280 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/12/31 11:13:48 53D280 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/31 11:13:48 53D280 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/12/31 11:13:48 550830 r v14 [videoguard2] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2014/12/31 11:13:48 550830 r v14 [videoguard2] Cannot open device: /dev/sci0

und das bekomme ich nun auch

• 2014/12/31 11:41:16 53D808 c [DVBAPI] Demuxer #0 trying to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1ABA ANY CHID PMTPID 0062 VPID 02FF
• 2014/12/31 11:41:16 534D88 r v14 [videoguard2] classD3 ins54: no cw --> Card isn't active
• 2014/12/31 11:41:16 534D88 r v14 [videoguard2] classD3 ins54: no cw --> Card is paired
• 2014/12/31 11:41:16 53D808 c local (098C&000000/0259/0081/98:687C7E7684A931DFF91D7B6578560E93): not found (67 ms) by v14

 

[Alex]

AW: CS + Pairing DM800

In dem letzte Log Fetzen wurde die Karte gelesen, das sieht gut. Jetzt musst du hakt warten bis die entsprehenden EMMS kommen

 

[Moschi]

AW: CS + Pairing DM800

das da im Abschnitt, den ich extra gepsotet habe, Card is paired steht ist richtig so?