Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

CS DBox2, Oscam, CCcam

    Nobody is reading this thread right now.
L

Luzzzmann

Ist oft hier
Registriert
2. September 2011
Beiträge
162
Reaktionspunkte
6
Punkte
38
Hallo zusammen.
Ich habe folgdende Konstellation:

1 Nokia Dbox2 die server sein soll, mit Abel MC , Keywelt Image, MPCS, Oscam, (keine Ahung was es genau ist, blicke durch die Bezeichnungen nicht so durch) Im Cardserver Menü steht MPCS auf grün. Folgende Configs sind drauf:

Oscam.config

PHP: 
#
# main configuration
#

[global]
nice                  = -1
WaitForCards        = 1
ClientTimeout       = 5
LogFile = stdout
Level               = 15
CacheDelay          = 120
saveinithistory     = 1

[webif]
httpport            = 666
httprefresh         = 10
httpallowed         = 192.168.0.0-192.168.255.255
httphideidleclients = 1
httpreadonly        = 0

# logging

logfile       = /var/log/oscam/oscam.log
usrfile       = /var/log/oscam/oscamuser.log
cwlogdir      = /var/log/oscam/cw


# anti-cascading

[anticasc]
enabled       = 1
numusers      = 1
sampletime    = 2
samples       = 5
penalty       = 1
aclogfile     = /var/log/oscam/aclog.log
denysamples   = 9

# protocols


[cccam]
port              = 47111
reshare             = 1
version            = 2.1.1
build              = 2971

[dvbapi]
enabled             = 1
au                  = 1
boxtype             = dbox2
user                = DBOX
pmt_mode            = 0
Oscam.server

PHP: 
#
# reader configuration
#

# TEST Sky-S02

[reader]
label                         = Sky-S02
device                        = /dev/tts/1
Protocol                      = mouse
detect                        = cd
enable                        = 1
smargopatch                   = 1
services                      = Sky-S02
CAID                          = 1702,1722,1833,1834,1836,09c4,09c7,09af,1861
ident                         = 000000 
emmcache                      = 1,3,2
group                         = 1
mhz                           = 600
cardmhz                       = 600 


# remote CCcam reader

[reader]
label      = remote
protocol   = cccam
device     = 192.168.1.199,47111
account    = ServerLogIn,LetMeIn2011
group      = 1
caid       = 1702,1722,1833,1834,1836,09c4,09c7,09af,1861
cccversion = 1.2.1
cccbuild   = 5678
Oscam.user

PHP: 
#
# user configuration
#

# Eigene User

[account]
user  = DBOX
group = 1
au    = 1
CAID  = 1702,1722,1833,1834,1836,09c4,09c7,09af,1861

c: 192.168.1.199 47111 ServerLogIn LetMeIn2011

# 2.Account

[account]
user  = Sagem
pwd   = sagembox
group = 1
au    = 1
CAID  = 1702,1722,1833,1834,1836,09c4,09c7,09af,1861

[account]
user  = ServerLogIn    
pwd   = LetMeIn2011
group = 1
au    = 1
CAID  = 1702,1722,1833,1834,1836,09c4,09c7,09af,1861
für was ist der u.a User Account genau ? und müsste der nicht in der oscam.server nochmal auftauchen ??


es wird aber nicht hell.
ist die oscam.server so ok für eine P02 Karte in Netcologne Kabelnetz ???
Warum steht dort ERROR ???

später soll dann die Sagembox Client werden. Aber erstmal sollte die Serverbox ja mit der Karte alleine helle werden...

Bitte um Hilfestellung ! Dankesehr !

Hier noch ein Screenshot vom Webinterface...:
 
AW: CS DBox2, Oscam, CCcam

Erst einmal wird das hier nichts ohne ein Log....

Du hast eine P02...mit der Caid 09C7....was also machst du da mit den Caids? Diese können dir alle bis auf die 09C7 egal sein.

Der Service muss auch angepasst werden.
 
AW: CS DBox2, Oscam, CCcam

Hi, ich dachte die P02 hat 1702 und 1833 !?
Die anderen Caids hab ich eingetragen, weil davon was im log stand...

PHP: 
2011/08/01 20:57:30     4000 s version=1.00-unstable_svn, build #3818, system=powerpc-tuxbox-linux, nice=-1
2011/08/01 20:57:30     4000 s client max. idle=120 sec, debug level=0
2011/08/01 20:57:30     4000 s max. logsize=4000 Kb
2011/08/01 20:57:30     4000 s client timeout=10000 ms, fallback timeout=2000 ms, cache delay=120 ms
2011/08/01 20:57:30     4000 s auth size=4800
2011/08/01 20:57:30     4000 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2011/08/01 20:57:31     4000 s userdb reloaded: 0 accounts freed, 3 accounts loaded, 0 expired, 0 disabled
2011/08/01 20:57:31     4000 s signal handling initialized (type=sysv)
2011/08/01 20:57:31     4000 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/08/01 20:57:31     4000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/08/01 20:57:31     4000 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/08/01 20:57:31     4000 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/08/01 20:57:31     4000 s monitor: disabled
2011/08/01 20:57:31     4000 s camd33: disabled
2011/08/01 20:57:31     4000 s camd35: disabled
2011/08/01 20:57:31     4000 s cs378x: disabled
2011/08/01 20:57:31     4000 s newcamd: disabled
2011/08/01 20:57:31     4000 s cccam: initialized (fd=6, port=47111, crypted)
2011/08/01 20:57:31     4000 s radegast: disabled
2011/08/01 20:57:31     4000 s http thread started
2011/08/01 20:57:31     4000 s creating thread for device /dev/tts/1 slot 0
2011/08/01 20:57:31     8003 r reader thread started (thread=    8003, device=/dev/tts/1, detect=cd, mhz=357, cardmhz=357)
2011/08/01 20:57:31     4000 s waiting for local card init
2011/08/01 20:57:31     4002 h HTTP Server listening on port 666
2011/08/01 20:57:31     8003 r WARNING: your card is asking for custom_baudrate = 1200, but your configuration can only deliver custom_baudrate = -2147483648
2011/08/01 20:57:31     8003 r You are over- or underclocking, try OSCam when running your reader at normal clockspeed as required by your card, and setting mhz and cardmhz parameters accordingly.
2011/08/01 20:57:31     8003 r You are probably connecting your reader via a serial port, OSCam has more flexibility switching to custom_baudrates when using an USB->serial converter, preferably based on FTDI chip.
2011/08/01 20:57:32     8003 r WARNING: your card is asking for custom_baudrate = 9600, but your configuration can only deliver custom_baudrate = -2147483648
2011/08/01 20:57:32     8003 r You are over- or underclocking, try OSCam when running your reader at normal clockspeed as required by your card, and setting mhz and cardmhz parameters accordingly.
2011/08/01 20:57:33     8003 r You are probably connecting your reader via a serial port, OSCam has more flexibility switching to custom_baudrates when using an USB->serial converter, preferably based on FTDI chip.
2011/08/01 20:57:34     8003 r card detected
2011/08/01 20:57:37     8003 r ATR: F8 F8 80 F8 80 78 00 80 80 00 78 F0 E0 FC 80 80 78 FF 
2011/08/01 20:57:37     8003 r ERROR: Could not read reader->convention
2011/08/01 20:57:37     8003 r Error activating card.
2011/08/01 20:57:42     8003 r ATR: F8 F8 80 F8 80 78 00 80 80 00 78 F0 E0 FC 80 80 78 FF 
2011/08/01 20:57:42     8003 r ERROR: Could not read reader->convention
2011/08/01 20:57:42     8003 r Error activating card.
2011/08/01 20:57:46     8003 r ATR: F8 F8 80 F8 80 78 00 80 80 00 78 F0 E0 FC 80 80 78 FF 
2011/08/01 20:57:46     8003 r ERROR: Could not read reader->convention
2011/08/01 20:57:46     8003 r Error activating card.
2011/08/01 20:57:50     8003 r ATR: F8 F8 80 F8 80 78 00 80 80 00 78 F0 E0 FC 80 80 78 FF 
2011/08/01 20:57:50     8003 r ERROR: Could not read reader->convention
2011/08/01 20:57:50     8003 r Error activating card.
2011/09/04 18:20:44     8003 r ATR: F8 F8 80 F8 80 78 00 80 80 00 78 F0 E0 FC 80 80 78 FF 
2011/09/04 18:20:44     8003 r ERROR: Could not read reader->convention
2011/09/04 18:20:44     8003 r Error activating card.
2011/09/04 18:20:45     8003 r card initializing error
2011/09/04 18:20:45     4000 s init for all local cards done
2011/09/04 18:20:45     4000 s anti cascading disabled
2011/09/04 18:20:45     C004 c plain dvbapi-client granted (DBOX, au=auto)
2011/09/04 18:20:45     C004 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2011/09/04 18:20:45     C004 c dvbapi: found pmt file /tmp/pmt.tmp
2011/09/04 18:20:45     C004 c dvbapi: [ADD PID 0] CAID: 1702    ECM_PID: 1746    PROVID: 000000
2011/09/04 18:20:45     C004 c dvbapi: [ADD PID 1] CAID: 1722    ECM_PID: 1646    PROVID: 000000
2011/09/04 18:20:45     C004 c dvbapi: [ADD PID 2] CAID: 1833    ECM_PID: 1846    PROVID: 000000
2011/09/04 18:20:45     C004 c dvbapi: [ADD PID 3] CAID: 1834    ECM_PID: 1C46    PROVID: 000000
2011/09/04 18:20:45     C004 c dvbapi: [ADD PID 4] CAID: 09C4    ECM_PID: 1B46    PROVID: 000000
2011/09/04 18:20:45     C004 c dvbapi: [ADD PID 5] CAID: 09C7    ECM_PID: 1D46    PROVID: 000000
2011/09/04 18:20:45     C004 c dvbapi: [ADD PID 6] CAID: 09AF    ECM_PID: 1F46    PROVID: 000000
2011/09/04 18:20:45     C004 c dvbapi: [ADD PID 7] CAID: 1861    ECM_PID: 1946    PROVID: 000000
2011/09/04 18:20:45     C004 c dvbapi: new program number: 002B (1702:002B unknown)
2011/09/04 18:20:46     C004 c DBOX (1702&000000/002B/93:3ED8): not found (18 ms) (of 1 avail 1)
2011/09/04 18:20:46     C004 c DBOX (1722&000000/002B/93:6754): rejected group (127 ms) (of 0 avail 0)
2011/09/04 18:20:46     C004 c DBOX (1833&000000/002B/89:DBE4): not found (19 ms) (of 1 avail 1)
2011/09/04 18:20:46     C004 c DBOX (1834&000000/002B/89:030C): rejected group (129 ms) (of 0 avail 0)
2011/09/04 18:20:47     C004 c DBOX (09C4&000000/002B/90:EFFE): rejected group (127 ms) (of 0 avail 0)
2011/09/04 18:20:47     C004 c DBOX (09C7&000000/002B/A6:A66A): rejected group (126 ms) (of 0 avail 0)
2011/09/04 18:20:47     C004 c DBOX (09AF&000000/002B/8D:6981): rejected group (129 ms) (of 0 avail 0)
2011/09/04 18:20:47     C004 c DBOX (1861&000000/002B/8E:2324): rejected group (128 ms) (of 0 avail 0)
2011/09/04 18:20:47     C004 c dvbapi: try pids again #1
2011/09/04 18:20:48     C004 c DBOX (1702&000000/002B/93:3ED8): not found (19 ms) (of 1 avail 1)
2011/09/04 18:20:48     C004 c DBOX (1722&000000/002B/93:6754): rejected group (129 ms) (of 0 avail 0)
2011/09/04 18:20:48     C004 c DBOX (1833&000000/002B/89:DBE4): not found (34 ms) (of 1 avail 1)
2011/09/04 18:20:48     C004 c DBOX (1834&000000/002B/89:030C): rejected group (129 ms) (of 0 avail 0)
2011/09/04 18:20:49     C004 c DBOX (09C4&000000/002B/90:EFFE): rejected group (129 ms) (of 0 avail 0)
2011/09/04 18:20:49     C004 c DBOX (09C7&000000/002B/A6:A66A): rejected group (128 ms) (of 0 avail 0)
2011/09/04 18:20:49     C004 c DBOX (09AF&000000/002B/8D:6981): rejected group (130 ms) (of 0 avail 0)
2011/09/04 18:20:49     C004 c DBOX (1861&000000/002B/8E:2324): rejected group (131 ms) (of 0 avail 0)
2011/09/04 18:20:49     C004 c dvbapi: try pids again #2
2011/09/04 18:20:50     C004 c DBOX (1702&000000/002B/93:3ED8): not found (22 ms) (of 1 avail 1)
2011/09/04 18:20:50     C004 c DBOX (1722&000000/002B/93:6754): rejected group (121 ms) (of 0 avail 0)
2011/09/04 18:20:50     C004 c DBOX (1833&000000/002B/89:DBE4): not found (24 ms) (of 1 avail 1)
2011/09/04 18:20:50     C004 c DBOX (1834&000000/002B/89:030C): rejected group (121 ms) (of 0 avail 0)
2011/09/04 18:20:51     C004 c DBOX (09C4&000000/002B/90:2CBE): rejected group (121 ms) (of 0 avail 0)
2011/09/04 18:20:51     C004 c DBOX (09C7&000000/002B/A6:2974): rejected group (130 ms) (of 0 avail 0)
2011/09/04 18:20:51     C004 c DBOX (09AF&000000/002B/8D:5E70): rejected group (122 ms) (of 0 avail 0)
2011/09/04 18:20:51     C004 c DBOX (1861&000000/002B/8E:2055): rejected group (125 ms) (of 0 avail 0)
2011/09/04 18:20:51     C004 c dvbapi: try pids again #3
2011/09/04 18:20:51     C004 c dvbapi: can't decode channel
 
AW: CS DBox2, Oscam, CCcam

Der Reader wird nicht initalisiert...
Nehm bei MHZ und CARDMHZ im Reader 368
 
AW: CS DBox2, Oscam, CCcam

tut nicht

PHP: 
>> OSCam <<  cardserver started at Mon Aug  1 20:57:29 2011
-------------------------------------------------------------------------------
2011/08/01 20:57:29     4000 s version=1.00-unstable_svn, build #3818, system=powerpc-tuxbox-linux, nice=-1
2011/08/01 20:57:29     4000 s client max. idle=120 sec, debug level=0
2011/08/01 20:57:29     4000 s max. logsize=4000 Kb
2011/08/01 20:57:29     4000 s client timeout=10000 ms, fallback timeout=2000 ms, cache delay=120 ms
2011/08/01 20:57:30     4000 s auth size=4800
2011/08/01 20:57:30     4000 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2011/08/01 20:57:30     4000 s userdb reloaded: 0 accounts freed, 3 accounts loaded, 0 expired, 0 disabled
2011/08/01 20:57:30     4000 s signal handling initialized (type=sysv)
2011/08/01 20:57:30     4000 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/08/01 20:57:30     4000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/08/01 20:57:30     4000 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/08/01 20:57:30     4000 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/08/01 20:57:30     4000 s monitor: disabled
2011/08/01 20:57:30     4000 s camd33: disabled
2011/08/01 20:57:30     4000 s camd35: disabled
2011/08/01 20:57:30     4000 s cs378x: disabled
2011/08/01 20:57:30     4000 s newcamd: disabled
2011/08/01 20:57:31     4000 s cccam: initialized (fd=6, port=47111, crypted)
2011/08/01 20:57:31     4000 s radegast: disabled
2011/08/01 20:57:31     4000 s http thread started
2011/08/01 20:57:31     4000 s creating thread for device /dev/tts/1 slot 0
2011/08/01 20:57:31     8003 r reader thread started (thread=    8003, device=/dev/tts/1, detect=cd, mhz=368, cardmhz=368)
2011/08/01 20:57:31     4000 s waiting for local card init
2011/08/01 20:57:31     4002 h HTTP Server listening on port 666
2011/08/01 20:57:31     8003 r WARNING: your card is asking for custom_baudrate = 1200, but your configuration can only deliver custom_baudrate = -2147483648
2011/08/01 20:57:31     8003 r You are over- or underclocking, try OSCam when running your reader at normal clockspeed as required by your card, and setting mhz and cardmhz parameters accordingly.
2011/08/01 20:57:31     8003 r You are probably connecting your reader via a serial port, OSCam has more flexibility switching to custom_baudrates when using an USB->serial converter, preferably based on FTDI chip.
2011/08/01 20:57:32     8003 r WARNING: your card is asking for custom_baudrate = 9600, but your configuration can only deliver custom_baudrate = -2147483648
2011/08/01 20:57:32     8003 r You are over- or underclocking, try OSCam when running your reader at normal clockspeed as required by your card, and setting mhz and cardmhz parameters accordingly.
2011/08/01 20:57:32     8003 r You are probably connecting your reader via a serial port, OSCam has more flexibility switching to custom_baudrates when using an USB->serial converter, preferably based on FTDI chip.
2011/08/01 20:57:34     8003 r card detected
2011/08/01 20:57:37     8003 r ATR: F8 F8 80 F8 80 78 00 80 80 00 78 F0 E0 FC 80 80 78 FF 
2011/08/01 20:57:37     8003 r ERROR: Could not read reader->convention
2011/08/01 20:57:37     8003 r Error activating card.
2011/08/01 20:57:42     8003 r ATR: F8 F8 80 F8 80 78 00 80 80 00 78 F0 E0 FC 80 80 78 FF 
2011/08/01 20:57:42     8003 r ERROR: Could not read reader->convention
2011/08/01 20:57:42     8003 r Error activating card.
2011/08/01 20:57:46     8003 r ATR: F8 F8 80 F8 80 78 00 80 80 00 78 F0 E0 FC 80 80 78 FF 
2011/08/01 20:57:46     8003 r ERROR: Could not read reader->convention
2011/08/01 20:57:46     8003 r Error activating card.
2011/08/01 20:57:50     8003 r ATR: F8 F8 80 F8 80 78 00 80 80 00 78 F0 E0 FC 80 80 78 FF 
2011/08/01 20:57:50     8003 r ERROR: Could not read reader->convention
2011/08/01 20:57:50     8003 r Error activating card.
2011/08/01 20:57:54     8003 r ATR: F8 F8 80 F8 80 78 00 80 80 00 78 F0 E0 FC 80 80 78 FF 
2011/08/01 20:57:54     8003 r ERROR: Could not read reader->convention
2011/08/01 20:57:54     8003 r Error activating card.
2011/08/01 20:57:55     8003 r card initializing error
2011/08/01 20:57:55     4000 s init for all local cards done
2011/08/01 20:57:55     4000 s anti cascading disabled
2011/08/01 20:57:55     C004 c plain dvbapi-client granted (DBOX, au=auto)
2011/08/01 20:57:55     C004 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2011/08/01 20:59:16     4002 h Got sigpipe signal -> captured
 
AW: CS DBox2, Oscam, CCcam

Dein Reader liefert nicht die Baudraten die gebraucht werden...Da wirst du wahrscheinlich keinen Erfolg haben....:emoticon-0124-worri
 
AW: CS DBox2, Oscam, CCcam

das heisst ?!

was muss ich tun ?!
 
AW: CS DBox2, Oscam, CCcam

Evtl. eine andere Cam verbauen oder im Image schauen ob du die Baudraten irgendwie beeinflussen kannst.

Kein Plan....^^
 
AW: CS DBox2, Oscam, CCcam

Aber es muss doch jemand hier diese Kombi am laufen haben... Ich hab gelesen das
es so funzt:

Server: Nokia D-Box2, Multicam Abel Rev2, Pre***re P02 Karte, Keywelt Image, CCcam 209 & Newcs, ucode 0014,
Client: Nokia D-Box2, Keywelt Image, CCcam 209, ucode 0014,

wie bekommen ich das mit CCcam un Newcs hin ?
 
AW: CS DBox2, Oscam, CCcam

Wenn du das iwo gelesen hast, dann wende dich doch auch an die Leute die es geschrieben haben.

Ich kann dir an der Stelle leider nicht weiterhelfen.
Und für CCcam und NewCS bist du hier im OScam Bereich leider falsch. :emoticon-0112-wonde
 
AW: CS DBox2, Oscam, CCcam

Ja die Leute antworten ja nicht... ist das dasnn was anderes ? Sorry ich blicke durch die Unterschiede nicht durch.... :-(
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

W
gelöst HD+ 05 Karte aktivieren
2 3
Antworten
34
Aufrufe
996
wfra1
W
A
Aussetzer bei Oscam Client mit V23 Karte
2
Antworten
23
Aufrufe
859
DarkStarXxX
D
No matching reader found
Antworten
3
Aufrufe
159
bubbl
gelöst Oscam Server hinter VPS Oscam Server Problem
2 3
Antworten
30
Aufrufe
782
TDCroPower
W
  • Gesperrt
HD+ 05 mit Oscam
Antworten
2
Aufrufe
267
leyla38
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…