m
0x000000060000-0x000000080000 : "Splash"
44m37m1m2J1;1H(B)B?3l?9haseblock(): Magic bitmas
U-Boot 2009.03-svn1773 (Nov 02 2010 - 15:25:47) Coolstream HDxystemFS"
arcv
steadcvmac
Chipset information): Magic bitmask 0x1
Vendor: Conexant Type: CX2450x (Nevis) Revision: D0 Fuses: 7EFE6D24cd: USB 2.0 'Enhanced' Host Controller (E
steadriver
jffs2_scan_eraseblock()
Option: 00410000 max. clock: 600 MHz Core voltage: low.0: Trident CX2450X EHCI USB-Controller
Clock informationtead
jffs2_sc
MPG0: 594.000 MHz MPG1: 594.000 MHz HD : 593.407 MHz AUD : 491.520 MHzber 1
PLL0: 432.000 MHz PLL1: 594.000 MHz PLL2: 533.333 MHz00
CPU : 594.000 MHz from PLL1 USB
Serial number: 010-00006630 (0A-0019E6)ialNumber: cx2450x-ehci.0
*** Warning - bad CRC, using default environment ***
hub 1-0:1.0: 1 port detected
Network configuration
cx2450x-ehci cx2450
MAC: Conexant VMAC rev. 07 address: 00-C5-5C-00-19-E6
cx2450x-ehc
PHY: IC Plus IP101 address: 09gned bus number 2
Error: Bad gzipped data
Error: no valid bmp or bmp
cx2450x-ehci cx2450
Image Type: ARM Linux Kernel Image (uncompressed)
usb usb2: New USB
Data Size: 2132628 Bytes = 2 MB=0002
Load Address: 00048000
usb usb2: New USB devi
Entry Point: 00048000=2, SerialNumber=1
Verifying Checksum ... OK
Loading Kernel Image ... OKX2450X EHCI USB-Controller
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.s by BluePeerCrew ehci_hcd
Linux version 2.6.34.13-nevis by BluePeerCrew (gcc version 4.6.3 (crosstool-NG 1ehci.1
hub 2-0:1.0: USB hub found
.15.2) ) #1 Fri Nov 23 201.0: 1 po
Machine: CoolStream HDx IRD
Memory policy: ECC disabled, Data cache writeback
ALSA device list:
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536
NET: Registered protocol family 17
Kernel command line: console=ttyRI0 mtdparts=cx2450xflash:384k(U-Boot)ro,128k(Spcan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0x0500 in
lash),4096k(kernel),28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384Mead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000
PID hash table entries: 2048 (order: 1, 8192 bytes)
stead
stead
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)t found at 0x00000018: 0x0200 in
vmalloc : 0x98800000 - 0xe0000000 (1144 MB)
stead
jffs2_scan_eraseblock():
lowmem : 0x80000000 - 0x98000000 ( 384 MB)900 in
jffs2_scan_era
.text : 0x80062000 - 0x80429000 (3868 kB)00024: 0xb00e in
.data : 0x8042a000 - 0x8044a360 ( 129 kB)ead
Further such events for this erase block
NR_IRQS:352 printed
Console: colour dummy device 80x30
usb 1-1: Ne
console [ttyRI0] enableddor=13fe, idProduct=1f23
Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504)
usb 1-1: New USB device strings: Mfr=1, Product=2,
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
usb 1-1: Man
NET: Registered protocol family 16
usb 1-1: SerialNum
bio: create slab <bio-0> at 0
scsi0
SCSI subsystem initialized
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)ock1 (driver?)
1f02
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
1f03 28160 mtdblock3 (driver?)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)e to mount root fs on unknown-block(0,0)
TCP: Hash tables configured (established 16
NET: Registered protocol family 1vision: D0 Fuses: 7EFE6D24
RPC: Registered udp transport module.
RPC: Registered tcp transport module.z Core voltage: low
RPC: Registered tcp NFSv4.1 backchannel transport module.mation
MPG0: 594.000 MHz MPG1: 594.00
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (SUMMARY) 2001-2006 Red Hat, Inc.
CPU : 5
msgmni has been set to 752
Me
io scheduler noop registered
Start End
io scheduler deadline registered (default)
.x
cx2450xflash: Found 1 x16 devices at 0x0 in 16-bit bankRC, using default environment ***
Amd/Fujitsu Extended Query Table at 0x0040nfigurationck: 600 MHz Core vo
MAC: Con
cx2450xflash: CFI does not contain boot bank location. Assuming top.nformation
MPG0: 594.00
PHY: IC Plus IP101
number of CFI chips: 1: 491.520 MHz
4 cmdlinepart partitions found on MTD device cx2450xflash
Error: no valid bmp or bmp.gz image at f0060000
Creating 4 MTD partitions on "cx2450xflash":
Hit any key to stop autoboot: 0Hz from
usb usb1: Product: Trident CX2450X EHCI USB-Controllerpressed)
Memory policy: ECC disabled, Data c
usb usb1: Manufacturer: Linux 2.6.34.13-nevis by BluePeerCrew ehci_hcd zonelists in Zone order, mobility grouping on. Total pages: 97536 E
usb usb1: SerialNumber: cx2450x-ehci.0
Verifying Checksum ..
Kerne
hub 1-0:1.0: USB hub foundRI0 mtdparts=cx2450xflash:
hub 1-0:1.0: 1 port detected
OK
Starting kernel
cx2450x-ehci cx2450x-ehci.1: Trident CX2450X EHCI USB-Controller,28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384MLinux ve
cx2450x-ehci cx2450x-ehci.1: new USB bus registered, assigned bus number 2h table entries: 2048 (order: 1, 8192 bytes)
Virtual kernel memory layout:, mobility groupin
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Kernel com
fixmap : 0xfff000
usb usb2: Product: Trident CX2450X EHCI USB-Controller
DMA : 0xffc00000 - 0xffe
usb usb2: Manufacturer: Linux 2.6.34.13-nevis by BluePeerCrew ehci_hcdvmalloc : 0x98800000 - 0xe0000000 (1144 MB)
usb usb2: SerialNumber: cx2450x-ehci.10x80000000 - 0x98000000 ( 384 MB)byt
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 po
Consol
No soundcards found.80x30ayout:
TCP cubic registeredsole [ttyRI0] enable
NET: Registered protocol family 17ng delay loop... 593.10 BogoMIPS (
NET: Registered protocol family 150xfffe0000 ( 896 kB)
M
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0x0500 ing write buffer coherency: ok
vmalloc
NET: Registe
steadotoco
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000004: 0x0200 in0000000 - 0x98000000
SCSI subsystem initialized
stead
consol
NET: Regi
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000001c: 0x0900 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000020: 0x3200 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000024: 0xb00e in
stead
Further such events for this erase block will not be printed
usb 1-1: New USB device found, idVendor=13fe, idProduct=1f23
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: STORE N GO
usb 1-1: Manufacturer: Verbatim
usb 1-1: SerialNumber: 079113712171
scsi0 : usb-storage 1-1:1.0
Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
empty_blocks 219, bad_blocks 0, c->nr_blocks 220
VFS: Cannot open root device "mtd3" or unknown-block(0,0)
Please append a correct "root=" boot option; here are the available partitions:
1f00 384 mtdblock0 (driver?)
1f01 128 mtdblock1 (driver?)
1f02 4096 mtdblock2 (driver?)
1f03 28160 mtdblock3 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
