Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extentpermitted by applicable law.
Last login: Sun Oct 13 10:27:08 2013 from roby-pc.homenet.telecomitalia.it
we@we:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-48squeeze4) (dannf@debi an.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Sep 23 23:00:18 UTC 201 3
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000077000000 (usable)
[ 0.000000] BIOS-e820: 0000000077000000 - 000000007f000000 (reserved)
[ 0.000000] BIOS-e820: 000000007f000000 - 000000007fde0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.5 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around i t.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) = => (reserved)
[ 0.000000] last_pfn = 0x7fde0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 3779d000 - 37fefde6
[ 0.000000] Allocated new RAMDISK: 00100000 - 00952de6
[ 0.000000] Move RAMDISK from 000000003779d000 - 0000000037fefde5 to 00100000 - 00952de5
[ 0.000000] ACPI: RSDP 000f7a00 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 7fee3000 00038 (v01 Nvidia AWRDACPI 42302E31 AWRD 0000 0000)
[ 0.000000] ACPI: FACP 7fee3080 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 0000 0000)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has
zero address or length: 0000000000000000/1 (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT 7fee3100 05F78 (v01 NVIDIA AWRDACPI 00001000 MSFT 0300 0000)
[ 0.000000] ACPI: FACS 7fee1800 00040
[ 0.000000] ACPI: HPET 7fee9140 00038 (v01 Nvidia AWRDACPI 42302E31 AWRD 0000 0098)
[ 0.000000] ACPI: MCFG 7fee9180 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 0000 0000)
[ 0.000000] ACPI: APIC 7fee9080 00098 (v01 Nvidia AWRDACPI 42302E31 AWRD 0000 0000)
[ 0.000000] ACPI: SSDT 7fee9820 003A8 (v01 PmRef CpuPm 00003000 INTL 2004 0311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1161MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014cad2c] TEXT DATA BSS ==> [0001000000 - 00014cad2c]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00014cb000 - 00014d10bf] BRK ==> [00014cb000 - 00014d10bf]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000100000 - 0000952de6] NEW RAMDISK ==> [0000100000 - 0000952de6]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f38b0] f38b0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007fde0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00077000
[ 0.000000] 0: 0x0007f000 -> 0x0007fde0
[ 0.000000] On node 0 totalpages: 490863
[ 0.000000] free_area_init_node: node 0, pgdat c13b2900, node_mem_map c14d320 0
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2324 pages used for memmap
[ 0.000000] HighMem zone: 262350 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:7010 0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34360 r0 d22984 u1048576
[ 0.000000] pcpu-alloc: s34360 r0 d22984 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 486771
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=U UID=dba36021-2af0-43b3-9c69-2c7f9a256986 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0007fde0)
[ 0.000000] Memory: 1931272k/2094976k available (2509k kernel code, 30932k re served, 1315k data, 380k init, 1058696k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bd000 - 0xc141c000 ( 380 kB)
[ 0.000000] .data : 0xc1273733 - 0xc13bc504 (1315 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1273733 (2509 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, N odes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2200.010 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer fr equency.. 4400.02 BogoMIPS (lpj=8800040)
[ 0.004020] Security Framework initialized
[ 0.004025] SELinux: Disabled at boot.
[ 0.004031] Mount-cache hash table entries: 512
[ 0.004142] Initializing cgroup subsys ns
[ 0.004146] Initializing cgroup subsys cpuacct
[ 0.004149] Initializing cgroup subsys devices
[ 0.004151] Initializing cgroup subsys freezer
[ 0.004153] Initializing cgroup subsys net_cls
[ 0.004173] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004175] CPU: L2 cache: 1024K
[ 0.004178] CPU: Physical Processor ID: 0
[ 0.004179] CPU: Processor Core ID: 0
[ 0.004182] mce: CPU supports 6 MCE banks
[ 0.004189] CPU0: Thermal monitoring enabled (TM2)
[ 0.004192] using mwait in idle threads.
[ 0.004198] Performance Events: Core2 events, Intel PMU driver.
[ 0.004203] ... version: 2
[ 0.004205] ... bit width: 40
[ 0.004206] ... generic registers: 2
[ 0.004208] ... value mask: 000000ffffffffff
[ 0.004209] ... max period: 000000007fffffff
[ 0.004211] ... fixed-purpose events: 3
[ 0.004212] ... event mask: 0000000700000003
[ 0.004216] Checking 'hlt' instruction... OK.
[ 0.021013] ACPI: Core revision 20090903
[ 0.028059] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028482] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068712] CPU0: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 1024K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.156113] CPU1: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d
[ 0.156120] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160049] Brought up 2 CPUs
[ 0.160051] Total of 2 processors activated (8799.97 BogoMIPS).
[ 0.160564] CPU0 attaching sched-domain:
[ 0.160568] domain 0: span 0-1 level MC
[ 0.160570] groups: group c2803778 cpus 0 group c2903778 cpus 1
[ 0.160576] CPU1 attaching sched-domain:
[ 0.160578] domain 0: span 0-1 level MC
[ 0.160580] groups: group c2903778 cpus 1 group c2803778 cpus 0
[ 0.160635] devtmpfs: initialized
[ 0.160635] regulator: core version 0.5
[ 0.160635] NET: Registered protocol family 16
[ 0.160635] ACPI: bus type pci registered
[ 0.160635] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31
[ 0.160635] PCI: MCFG area at f0000000 reserved in E820
[ 0.160635] PCI: Using MMCONFIG for extended config space
[ 0.160635] PCI: Using configuration type 1 for base access
[ 0.160635] bio: create slab <bio-0> at 0
[ 0.160790] ACPI: EC: Look up EC in DSDT
[ 0.169244] ACPI: Interpreter enabled
[ 0.169248] ACPI: (supports S0 S1 S4 S5)
[ 0.169269] ACPI: Using IOAPIC for interrupt routing
[ 0.177244] ACPI: No dock devices found.
[ 0.177489] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.178572] pci 0000:00:03.1: reg 10 io port: [0xff00-0xff3f]
[ 0.178587] pci 0000:00:03.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.178592] pci 0000:00:03.1: reg 24 io port: [0x1c80-0x1cbf]
[ 0.178625] pci 0000:00:03.1: PME# supported from D3hot D3cold
[ 0.178631] pci 0000:00:03.1: PME# disabled
[ 0.178701] pci 0000:00:03.3: reg 10 32bit mmio: [0xeff00000-0xeff7ffff]
[ 0.178902] pci 0000:00:04.0: reg 10 32bit mmio: [0xeffff000-0xefffffff]
[ 0.178939] pci 0000:00:04.0: supports D1 D2
[ 0.178941] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.178945] pci 0000:00:04.0: PME# disabled
[ 0.178974] pci 0000:00:04.1: reg 10 32bit mmio: [0xefffe000-0xefffe0ff]
[ 0.179021] pci 0000:00:04.1: supports D1 D2
[ 0.179023] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179027] pci 0000:00:04.1: PME# disabled
[ 0.179076] pci 0000:00:08.0: reg 20 io port: [0xfc00-0xfc0f]
[ 0.179127] pci 0000:00:09.0: reg 10 32bit mmio: [0xefff4000-0xefff7fff]
[ 0.179172] pci 0000:00:09.0: PME# supported from D3hot D3cold
[ 0.179175] pci 0000:00:09.0: PME# disabled
[ 0.179275] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179278] pci 0000:00:0b.0: PME# disabled
[ 0.179338] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179341] pci 0000:00:0c.0: PME# disabled
[ 0.179400] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179403] pci 0000:00:0d.0: PME# disabled
[ 0.179433] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.179437] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.179442] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977]
[ 0.179447] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73]
[ 0.179451] pci 0000:00:0e.0: reg 20 io port: [0xf700-0xf70f]
[ 0.179456] pci 0000:00:0e.0: reg 24 32bit mmio: [0xefff8000-0xefff9fff]
[ 0.179513] pci 0000:00:0f.0: reg 10 32bit mmio: [0xefffd000-0xefffdfff]
[ 0.179518] pci 0000:00:0f.0: reg 14 io port: [0xf600-0xf607]
[ 0.179523] pci 0000:00:0f.0: reg 18 32bit mmio: [0xefffc000-0xefffc0ff]
[ 0.179528] pci 0000:00:0f.0: reg 1c 32bit mmio: [0xefffb000-0xefffb00f]
[ 0.179566] pci 0000:00:0f.0: supports D1 D2
[ 0.179568] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179573] pci 0000:00:0f.0: PME# disabled
[ 0.179598] pci 0000:00:10.0: reg 10 32bit mmio: [0xed000000-0xedffffff]
[ 0.179605] pci 0000:00:10.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.179612] pci 0000:00:10.0: reg 1c 64bit mmio: [0xee000000-0xeeffffff]
[ 0.179619] pci 0000:00:10.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.179705] pci 0000:00:0a.0: transparent bridge
[ 0.179708] pci 0000:00:0a.0: bridge io port: [0xc000-0xcfff]
[ 0.179712] pci 0000:00:0a.0: bridge 32bit mmio: [0xefb00000-0xefbfffff]
[ 0.179716] pci 0000:00:0a.0: bridge 32bit mmio pref: [0xefa00000-0xefafffff]
[ 0.179762] pci 0000:00:0b.0: bridge io port: [0xb000-0xbfff]
[ 0.179765] pci 0000:00:0b.0: bridge 32bit mmio: [0xef900000-0xef9fffff]
[ 0.179769] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xef800000-0xef8fffff]
[ 0.179815] pci 0000:00:0c.0: bridge io port: [0xe000-0xefff]
[ 0.179818] pci 0000:00:0c.0: bridge 32bit mmio: [0xef700000-0xef7fffff]
[ 0.179823] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xefe00000-0xefefffff]
[ 0.179868] pci 0000:00:0d.0: bridge io port: [0xd000-0xdfff]
[ 0.179871] pci 0000:00:0d.0: bridge 32bit mmio: [0xefd00000-0xefdfffff]
[ 0.179876] pci 0000:00:0d.0: bridge 64bit mmio pref: [0xefc00000-0xefcfffff]
[ 0.179889] pci_bus 0000:00: on NUMA node 0
[ 0.179893] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.180090] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.236569] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disa bled.
[ 0.236707] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disa bled.
[ 0.236843] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disa bled.
[ 0.236979] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disa bled.
[ 0.237114] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disa bled.
[ 0.237250] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disa bled.
[ 0.237385] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disa bled.
[ 0.237520] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disa bled.
[ 0.237656] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disa bled.
[ 0.237794] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
[ 0.237930] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[ 0.238072] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[ 0.238211] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0
[ 0.238350] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0
[ 0.238487] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 0.238623] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)
[ 0.238759] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15)
[ 0.238896] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15)
[ 0.239035] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disa bled.
[ 0.239172] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.239347] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.239513] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.239679] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.239844] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.240017] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.240183] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.240349] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.240514] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.240680] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.240846] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
[ 0.241013] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
[ 0.241179] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
[ 0.241346] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
[ 0.241512] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.241678] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
[ 0.241844] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.242012] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.242179] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.242345] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.242512] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.242620] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=io+mem ,locks=none
[ 0.242623] vgaarb: loaded
[ 0.242638] PCI: Using ACPI for IRQ routing
[ 0.242638] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.242638] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.242638] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.248018] Switching to clocksource tsc
[ 0.249214] pnp: PnP ACPI init
[ 0.249224] ACPI: bus type pnp registered
[ 0.253279] pnp: PnP ACPI: found 14 devices
[ 0.253281] ACPI: ACPI bus type pnp unregistered
[ 0.253285] PnPBIOS: Disabled by ACPI PNP
[ 0.253294] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.253296] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.253299] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.253302] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.253305] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.253307] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.253311] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.253314] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
[ 0.253317] system 00:01: iomem range 0x77000000-0x7effffff has been reserved
[ 0.253322] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.253325] system 00:02: ioport range 0x295-0x314 has been reserved
[ 0.253327] system 00:02: ioport range 0x880-0x88f has been reserved
[ 0.253335] system 00:0c: iomem range 0xf0000000-0xf1ffffff has been reserved
[ 0.253340] system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
[ 0.253343] system 00:0d: iomem range 0xfeff0000-0xfeff00ff has been reserved
[ 0.253345] system 00:0d: iomem range 0x7fee0000-0x7fefffff could not be rese rved
[ 0.253348] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.253351] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.253354] system 00:0d: iomem range 0x100000-0x7fedffff could not be reserv ed
[ 0.253357] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be rese rved
[ 0.253360] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.253363] system 00:0d: iomem range 0xfeff0000-0xfeff03ff could not be rese rved
[ 0.288095] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
[ 0.288098] pci 0000:00:0a.0: IO window: 0xc000-0xcfff
[ 0.288103] pci 0000:00:0a.0: MEM window: 0xefb00000-0xefbfffff
[ 0.288107] pci 0000:00:0a.0: PREFETCH window: 0xefa00000-0xefafffff
[ 0.288112] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.288115] pci 0000:00:0b.0: IO window: 0xb000-0xbfff
[ 0.288119] pci 0000:00:0b.0: MEM window: 0xef900000-0xef9fffff
[ 0.288122] pci 0000:00:0b.0: PREFETCH window: 0x000000ef800000-0x000000ef8 fffff
[ 0.288127] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[ 0.288129] pci 0000:00:0c.0: IO window: 0xe000-0xefff
[ 0.288133] pci 0000:00:0c.0: MEM window: 0xef700000-0xef7fffff
[ 0.288137] pci 0000:00:0c.0: PREFETCH window: 0x000000efe00000-0x000000efe fffff
[ 0.288141] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
[ 0.288144] pci 0000:00:0d.0: IO window: 0xd000-0xdfff
[ 0.288148] pci 0000:00:0d.0: MEM window: 0xefd00000-0xefdfffff
[ 0.288151] pci 0000:00:0d.0: PREFETCH window: 0x000000efc00000-0x000000efc fffff
[ 0.288161] pci 0000:00:0a.0: setting latency timer to 64
[ 0.288168] pci 0000:00:0b.0: setting latency timer to 64
[ 0.288174] pci 0000:00:0c.0: setting latency timer to 64
[ 0.288181] pci 0000:00:0d.0: setting latency timer to 64
[ 0.288184] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.288187] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.288190] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.288192] pci_bus 0000:01: resource 1 mem: [0xefb00000-0xefbfffff]
[ 0.288194] pci_bus 0000:01: resource 2 pref mem [0xefa00000-0xefafffff]
[ 0.288197] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.288199] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.288201] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.288204] pci_bus 0000:02: resource 1 mem: [0xef900000-0xef9fffff]
[ 0.288206] pci_bus 0000:02: resource 2 pref mem [0xef800000-0xef8fffff]
[ 0.288209] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.288211] pci_bus 0000:03: resource 1 mem: [0xef700000-0xef7fffff]
[ 0.288213] pci_bus 0000:03: resource 2 pref mem [0xefe00000-0xefefffff]
[ 0.288216] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.288218] pci_bus 0000:04: resource 1 mem: [0xefd00000-0xefdfffff]
[ 0.288221] pci_bus 0000:04: resource 2 pref mem [0xefc00000-0xefcfffff]
[ 0.288247] NET: Registered protocol family 2
[ 0.288324] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.288618] TCP established hash table entries: 131072 (order: 8, 1048576 byt es)
[ 0.289052] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.289340] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.289343] TCP reno registered
[ 0.289449] NET: Registered protocol family 1
[ 0.289837] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
[ 0.289849] pci 0000:00:04.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
[ 0.367778] pci 0000:00:04.0: PCI INT A disabled
[ 0.368042] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
[ 0.368046] pci 0000:00:04.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.368058] pci 0000:00:04.1: PCI INT B disabled
[ 0.368110] pci 0000:00:10.0: Boot video device
[ 0.368155] Unpacking initramfs...
[ 0.588397] Freeing initrd memory: 8523k freed
[ 0.594893] audit: initializing netlink socket (disabled)
[ 0.594910] type=2000 audit(1381650745.591:1): initialized
[ 0.598057] highmem bounce pool size: 64 pages
[ 0.598062] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.599279] VFS: Disk quotas dquot_6.5.2
[ 0.599326] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.599392] msgmni has been set to 1723
[ 0.599564] alg: No test for stdrng (krng)
[ 0.599608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 53)
[ 0.599611] io scheduler noop registered
[ 0.599612] io scheduler anticipatory registered
[ 0.599614] io scheduler deadline registered
[ 0.599643] io scheduler cfq registered (default)
[ 0.599762] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
[ 0.599795] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.599904] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X
[ 0.599910] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.599995] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X
[ 0.600001] pcieport 0000:00:0d.0: setting latency timer to 64
[ 0.600133] isapnp: Scanning for PnP cards...
[ 0.952989] isapnp: No Plug & Play device found
[ 0.954141] Linux agpgart interface v0.103
[ 0.954261] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.954352] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.954665] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.954815] PNP: PS/2 Controller [PNP0303
S2K,PNP0f13
S2M] at 0x60,0x64 irq 1,12
[ 0.957690] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.957695] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.957750] mice: PS/2 mouse device common for all mice
[ 0.957790] rtc_cmos 00:05: RTC can wake from S4
[ 0.957818] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.957852] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.957865] cpuidle: using governor ladder
[ 0.957867] cpuidle: using governor menu
[ 0.957870] No iBFT detected.
[ 0.958164] TCP cubic registered
[ 0.958285] NET: Registered protocol family 10
[ 0.958915] Mobile IPv6
[ 0.958917] NET: Registered protocol family 17
[ 0.958935] Using IPI No-Shortcut mode
[ 0.958988] PM: Resume from disk failed.
[ 0.958997] registered taskstats version 1
[ 0.959319] rtc_cmos 00:05: setting system clock to 2013-10-13 07:52:26 UTC ( 1381650746)
[ 0.959361] Initalizing network drop monitor service
[ 0.959383] Freeing unused kernel memory: 380k freed
[ 0.959601] Write protecting the kernel text: 2512k
[ 0.959621] Write protecting the kernel read-only data: 912k
[ 0.974686] udev[56]: starting version 164
[ 0.987856] input: AT Translated Set 2 keyboard as /devices/platform/i8042/se rio0/input/input0
[ 1.084247] usbcore: registered new interface driver usbfs
[ 1.084400] usbcore: registered new interface driver hub
[ 1.084560] usbcore: registered new device driver usb
[ 1.096996] SCSI subsystem initialized
[ 1.097085] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.097115] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
[ 1.097156] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 1.097159] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 1.097190] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus numbe r 1
[ 1.097230] ehci_hcd 0000:00:04.1: debug port 1
[ 1.097239] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 1.097258] ehci_hcd 0000:00:04.1: irq 22, io mem 0xefffe000
[ 1.104541] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.104550] ACPI: Thermal Zone [THRM] (40 C)
[ 1.108520] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 1.108544] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.108547] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.108549] usb usb1: Product: EHCI Host Controller
[ 1.108551] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.108553] usb usb1: SerialNumber: 0000:00:04.1
[ 1.108683] usb usb1: configuration #1 chosen from 1 choice
[ 1.108745] hub 1-0:1.0: USB hub found
[ 1.108755] hub 1-0:1.0: 8 ports detected
[ 1.108886] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.6 4.
[ 1.109181] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 1.109189] forcedeth 0000:00:0f.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
[ 1.109194] forcedeth 0000:00:0f.0: setting latency timer to 64
[ 1.120447] FDC 0 is a post-1991 82077
[ 1.122798] fan PNP0C0B:00: registered as cooling_device0
[ 1.122803] ACPI: Fan [FAN] (on)
[ 1.123101] libata version 3.00 loaded.
[ 1.205441] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.628957] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 13, addr 00: 01:2e:18:cc:50
[ 1.628961] forcedeth 0000:00:0f.0: highdma pwrctl mgmt lnktim msi desc-v3
[ 1.628978] ahci 0000:00:0e.0: version 3.0
[ 1.629391] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 1.629402] ahci 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
[ 1.629450] ahci 0000:00:0e.0: irq 27 for MSI/MSI-X
[ 1.629456] ahci 0000:00:0e.0: controller can do NCQ, turning on CAP_NCQ
[ 1.629507] ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf imp l IDE mode
[ 1.629511] ahci 0000:00:0e.0: flags: 64bit ncq sntf led clo pmp pio
[ 1.629514] ahci 0000:00:0e.0: setting latency timer to 64
[ 1.629846] scsi0 : ahci
[ 1.629951] scsi1 : ahci
[ 1.630000] scsi2 : ahci
[ 1.630047] scsi3 : ahci
[ 1.630170] ata1: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8100 irq 27
[ 1.630173] ata2: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8180 irq 27
[ 1.630176] ata3: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8200 irq 27
[ 1.630178] ata4: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8280 irq 27
[ 1.630220] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
[ 1.630248] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 1.630251] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 1.630268] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus numbe r 2
[ 1.630292] ohci_hcd 0000:00:04.0: irq 23, io mem 0xeffff000
[ 1.686018] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.686021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.686024] usb usb2: Product: OHCI Host Controller
[ 1.686025] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 1.686027] usb usb2: SerialNumber: 0000:00:04.0
[ 1.686108] usb usb2: configuration #1 chosen from 1 choice
[ 1.686135] hub 2-0:1.0: USB hub found
[ 1.686144] hub 2-0:1.0: 8 ports detected
[ 1.686199] pata_amd 0000:00:08.0: version 0.4.1
[ 1.686243] pata_amd 0000:00:08.0: setting latency timer to 64
[ 1.686309] scsi4 : pata_amd
[ 1.686365] scsi5 : pata_amd
[ 1.686883] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.686887] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.948012] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.948024] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.948029] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.060008] usb 2-7: new full speed USB device using ohci_hcd and address 2
[ 2.272018] usb 2-7: New USB device found, idVendor=0403, idProduct=6001
[ 2.272021] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.272087] usb 2-7: configuration #1 chosen from 1 choice
[ 2.336010] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.336868] ata1.00: ATA-7: Hitachi HTS541640J9SA00, SB1OC74P, max UDMA/100
[ 2.336871] ata1.00: 78140160 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.337904] ata1.00: configured for UDMA/100
[ 2.338000] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54164 SB1O PQ : 0 ANSI: 5
[ 2.338155] ata6: port disabled. ignoring.
[ 2.345987] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 2.346040] sd 0:0:0:0: [sda] Write Protect is off
[ 2.346043] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.346072] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
[ 2.346217] sda: sda1 sda2 < sda5 >
[ 2.756046] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.123903] PM: Starting manual resume from disk
[ 3.123907] PM: Resume from partition 8:5
[ 3.123908] PM: Checking hibernation image.
[ 3.124050] PM: Error -22 checking image file
[ 3.124052] PM: Resume from disk failed.
[ 3.156790] kjournald starting. Commit interval 5 seconds
[ 3.156800] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.972067] udev[380]: starting version 164
[ 5.347220] ACPI: WMI: Mapper loaded
[ 5.651735] ACPI: I/O resource nForce2_smbus [0x1c00-0x1c3f] conflicts with A CPI region SM00 [0x1c00-0x1c05]
[ 5.651777] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.651780] nForce2_smbus 0000:00:03.1: Error probing SMB1.
[ 5.651839] i2c i2c-0: nForce2 SMBus adapter at 0x1c80
[ 5.670287] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:0 0/input/input1
[ 5.670294] ACPI: Power Button [PWRB]
[ 5.670367] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp ut2
[ 5.670371] ACPI: Power Button [PWRF]
[ 5.710261] ACPI: SSDT 7fee9200 0026C (v01 PmRef Cpu0Ist 00003000 INTL 2004 0311)
[ 5.710512] processor LNXCPU:00: registered as cooling_device1
[ 5.710741] ACPI: SSDT 7fee96c0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 2004 0311)
[ 5.710972] processor LNXCPU:01: registered as cooling_device2
[ 5.985342] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.383102] usbcore: registered new interface driver usbserial
[ 6.383115] USB Serial support registered for generic
[ 6.383144] usbcore: registered new interface driver usbserial_generic
[ 6.383146] usbserial: USB Serial Driver core
[ 6.419747] [drm] Initialized drm 1.1.0 20060810
[ 6.968511] USB Serial support registered for FTDI USB Serial Device
[ 6.968541] ftdi_sio 2-7:1.0: FTDI USB Serial Device converter detected
[ 6.968568] usb 2-7: Detected FT232BM
[ 6.968570] usb 2-7: Number of endpoints 2
[ 6.968571] usb 2-7: Endpoint 1 MaxPacketSize 64
[ 6.968573] usb 2-7: Endpoint 2 MaxPacketSize 64
[ 6.968575] usb 2-7: Setting MaxPacketSize 64
[ 6.970003] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[ 6.970130] usb 2-7: FTDI USB Serial Device converter now attached to ttyUSB0
[ 6.970148] usbcore: registered new interface driver ftdi_sio
[ 6.970151] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 7.030720] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[ 7.030726] nouveau 0000:00:10.0: PCI INT A -> Link[AIGP] -> GSI 23 (level, l ow) -> IRQ 23
[ 7.030731] nouveau 0000:00:10.0: setting latency timer to 64
[ 7.032476] [drm] nouveau 0000:00:10.0: failed to evaluate _DSM: 5
[ 7.032816] [drm] nouveau 0000:00:10.0: Detected an NV40 generation card (0x0 63000a2)
[ 7.033264] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PR OM
[ 7.033268] [drm] nouveau 0000:00:10.0: ... BIOS signature not found
[ 7.033270] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PR AMIN
[ 7.061539] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/seri o1/input/input4
[ 7.071790] [drm] nouveau 0000:00:10.0: ... appears to be valid
[ 7.071793] [drm] nouveau 0000:00:10.0: BIT BIOS found
[ 7.071796] [drm] nouveau 0000:00:10.0: Bios version 05.73.32.08
[ 7.071798] [drm] nouveau 0000:00:10.0: TMDS table script pointers not stubbe d
[ 7.071800] [drm] nouveau 0000:00:10.0: BIT table 'd' not found
[ 7.071803] [drm] nouveau 0000:00:10.0: Found Display Configuration Block ver sion 3.0
[ 7.071806] [drm] nouveau 0000:00:10.0: DCB connector table: VHER 0x30 5 10 2
[ 7.071809] [drm] nouveau 0000:00:10.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
[ 7.071811] [drm] nouveau 0000:00:10.0: 1: 0x00001161: type 0x61 idx 1 tag 0x07
[ 7.071814] [drm] nouveau 0000:00:10.0: Raw DCB entry 0: 01000110 00000023
[ 7.071820] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 0 at offset 0xCD9D
[ 7.071839] [drm] nouveau 0000:00:10.0: ======= misaligned reg 0x001020FB === ====
[ 7.071878] [drm] nouveau 0000:00:10.0: ======= misaligned reg 0x001020FB === ====
[ 7.071937] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 1 at offset 0xCEE9
[ 7.071939] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 2 at offset 0xCEEA
[ 7.071961] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 3 at offset 0xD06C
[ 7.071966] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 4 at offset 0xD0EC
[ 7.071969] [drm] nouveau 0000:00:10.0: Pointer to flat panel table invalid
[ 7.079569] [TTM] Zone kernel: Available graphics memory: 441364 kiB.
[ 7.079571] [TTM] Zone highmem: Available graphics memory: 970712 kiB.
[ 7.079581] [drm] nouveau 0000:00:10.0: 128 MiB VRAM
[ 7.080623] [drm] nouveau 0000:00:10.0: 64 MiB GART (aperture)
[ 7.080985] [drm] nouveau 0000:00:10.0: Allocating FIFO number 0
[ 7.081258] [drm] nouveau 0000:00:10.0: nouveau_channel_alloc: initialised FI FO 0
[ 7.081264] [drm] nouveau 0000:00:10.0: Initial CRTC_OWNER is 0
[ 7.081269] [drm] nouveau 0000:00:10.0: Saving VGA fonts
[ 7.113513] [drm] nouveau 0000:00:10.0: Detected a VGA connector
[ 7.114420] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on vga encoder (o utput 0)
[ 7.164507] [drm] nouveau 0000:00:10.0: Load detected on output A
[ 7.164660] [drm] nouveau 0000:00:10.0: allocated 1024x768 fb: 0x49000, bo f6 793800
[ 7.230803] [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on vga encoder (o utput 0)
[ 7.230807] [drm] nouveau 0000:00:10.0: Output VGA-1 is running on CRTC 0 usi ng output A
[ 7.232765] Console: switching to colour frame buffer device 128x48
[ 7.236732] fb0: nouveaufb frame buffer device
[ 7.236734] registered panic notifier
[ 7.236739] [drm] Initialized nouveau 0.0.15 20090420 for 0000:00:10.0 on min or 0
[ 7.286035] HDA Intel 0000:00:09.0: power state changed by ACPI to D0
[ 7.286073] HDA Intel 0000:00:09.0: power state changed by ACPI to D0
[ 7.286357] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 7.286362] HDA Intel 0000:00:09.0: PCI INT A -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
[ 7.286365] hda_intel: Disable MSI for Nvidia chipset
[ 7.286393] HDA Intel 0000:00:09.0: setting latency timer to 64
[ 7.872008] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 8.192069] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:09.0/inp ut/input5
[ 9.169047] Adding 1633272k swap on /dev/sda5. Priority:-1 extents:1 across: 1633272k
[ 9.350832] EXT3 FS on sda1, internal journal
[ 9.461055] loop: module loaded
[ 10.388691] forcedeth 0000:00:0f.0: irq 28 for MSI/MSI-X
[ 11.742622] fuse init (API version 7.13)
[ 18.192007] [drm] nouveau 0000:00:10.0: Load detected on output A
[ 18.220517] [drm] nouveau 0000:00:10.0: Load detected on output A
[ 18.332086] [drm] nouveau 0000:00:10.0: Allocating FIFO number 1
[ 18.332340] [drm] nouveau 0000:00:10.0: nouveau_channel_alloc: initialised FI FO 1
[ 19.674762] Bluetooth: Core ver 2.15
[ 19.674822] NET: Registered protocol family 31
[ 19.674824] Bluetooth: HCI device and connection manager initialized
[ 19.674827] Bluetooth: HCI socket layer initialized
[ 19.747379] Bluetooth: L2CAP ver 2.14
[ 19.747382] Bluetooth: L2CAP socket layer initialized
[ 19.757401] Bluetooth: RFCOMM TTY layer initialized
[ 19.757406] Bluetooth: RFCOMM socket layer initialized
[ 19.757408] Bluetooth: RFCOMM ver 1.11
[ 19.838230] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.838233] Bluetooth: BNEP filters: protocol multicast
[ 19.884865] Bridge firewalling registered
[ 20.120667] Bluetooth: SCO (Voice Link) ver 0.6
[ 20.120669] Bluetooth: SCO socket layer initialized
[ 20.460004] eth0: no IPv6 routers present
[ 21.557376] lp: driver loaded but no devices found
[ 21.722997] ppdev: user-space parallel port driver
[ 23.932506] [drm] nouveau 0000:00:10.0: Load detected on output A
[ 23.964506] [drm] nouveau 0000:00:10.0: Load detected on output A
[ 24.096008] [drm] nouveau 0000:00:10.0: Load detected on output A
[ 30.029182] CPU0 attaching NULL sched-domain.
[ 30.029186] CPU1 attaching NULL sched-domain.
[ 30.128052] CPU0 attaching sched-domain:
[ 30.128056] domain 0: span 0-1 level MC
[ 30.128058] groups: group c2803778 cpus 0 group c2903778 cpus 1
[ 30.128064] CPU1 attaching sched-domain:
[ 30.128066] domain 0: span 0-1 level MC
[ 30.128068] groups: group c2903778 cpus 1 group c2803778 cpus 0
[ 1767.036876] usb 2-7: USB disconnect, address 2
[ 1767.037998] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnect ed from ttyUSB0
[ 1767.038018] ftdi_sio 2-7:1.0: device disconnected
[ 1783.716015] usb 2-3: new full speed USB device using ohci_hcd and address 3
[ 1783.944025] usb 2-3: New USB device found, idVendor=0403, idProduct=6001
[ 1783.944030] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1783.944035] usb 2-3: Product: FT232R USB UART
[ 1783.944038] usb 2-3: Manufacturer: FTDI
[ 1783.944041] usb 2-3: SerialNumber: AD02EAS0
[ 1783.944171] usb 2-3: configuration #1 chosen from 1 choice
[ 1783.952082] ftdi_sio 2-3:1.0: FTDI USB Serial Device converter detected
[ 1783.952118] usb 2-3: Detected FT232RL
[ 1783.952121] usb 2-3: Number of endpoints 2
[ 1783.952125] usb 2-3: Endpoint 1 MaxPacketSize 64
[ 1783.952128] usb 2-3: Endpoint 2 MaxPacketSize 64
[ 1783.952131] usb 2-3: Setting MaxPacketSize 64
[ 1783.955089] usb 2-3: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1807.336512] [drm] nouveau 0000:00:10.0: Load detected on output A
[ 1807.368555] [drm] nouveau 0000:00:10.0: Load detected on output A
[ 1807.400509] [drm] nouveau 0000:00:10.0: Load detected on output A
[ 1809.236515] [drm] nouveau 0000:00:10.0: Load detected on output A
[ 2343.988020] [drm] nouveau 0000:00:10.0: Load detected on output A
we@we:~$
