gelöst Cherche Oscam ubuntu 64 bit für HD Plus HD04

[jeanpaul]

Hallo,ich habe eine hd plus HD04 carte erhalten, und suche eine oscam für ubuntu Server, ich habe alle version getestet kein erfolg.
mein karte ist activiert und lauft in dreambox aber in mein ubuntu server lauft nichts da stett
CardOk
no Entiltement
ich habe wenig anung mit oscam, danke für eure hilfe

 

[dodo83]

Moin,
einfach die aktuellste OScam aus dem Trunk nehmen, bzw kompilieren auf dem Server.
Ansonsten die Configs von diesem posten und ein log ab start

 

[ghost0815]

CardOk
no Entiltement

Scheint als ob die Karte eingelesen wird, ihr aber Verlängerungs EMM´s fehlen.
Post Log und Conig´s bitte.

Wie Poste ich im OScam Bereich richtig

Hallo Zusammen, leider kam es in der Vergangenheit immer wieder dazu, dass sich Leute nicht richtig aritkulieren konnten. Daher möchten wir euch auf diesem Wege mal zeigen, welche Informationen eure Post von Problemen, Fragen etc. enthalten sollten. Aber bevor ihr hier eine Frage zum x-ten mal...

www.digital-eliteboard.com

 

[dodo83]

und lauft in dreambox

ich tippe mal auf Caid 0000 Problem

 

[ghost0815]

Dann kurz in orginal Hardware (HD+-Modul/HD+ Receiver) oder mit Gbox betreiben.

 

[jeanpaul]

ich muss arbeit gehen, mache ich die log heute abend.
ich habe schon in original modul lauft
aber bei ubuntu Server no Entiltement, ich denke liegt an oscam.
in dreambox mit openpli Image lauft nur bei ubuntu Server lauft nichts

 

[ghost0815]

Poste heute Abend den Log, die Confgs vom Ubuntu Server und Clienten/Receiver(Dreambox)

 

[jeanpaul]

oscam log

• Spoiler

  2020/05/11 01:50:37 00000000 s (main) System name = Linux
  [*]2020/05/11 01:50:37 00000000 s (main) Host name = ubuntu
  [*]2020/05/11 01:50:37 00000000 s (main) Release = 3.13.0-170-generic
  [*]2020/05/11 01:50:37 00000000 s (main) Version = #220-Ubuntu SMP Thu May 9 12:40:49 UTC 2019
  [*]2020/05/11 01:50:37 00000000 s (main) Machine = x86_64
  [*]2020/05/11 01:50:37 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1146
  [*]2020/05/11 01:50:37 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
  [*]2020/05/11 01:50:37 00000000 s (config) userdb reloaded: 7 accounts loaded, 0 expired, 2 disabled
  [*]2020/05/11 01:50:37 00000000 s (main) signal handling initialized
  [*]2020/05/11 01:50:37 00000000 s (config) 1888 service-id's loaded in 19 ms
  [*]2020/05/11 01:50:37 00000000 s (config) 3 entries read from oscam.whitelist
  [*]2020/05/11 01:50:37 00000000 s (net) cs378x: initialized (fd=4, port=2256)
  [*]2020/05/11 01:50:37 00000000 s (net) newcamd: initialized (fd=5, port=36000)
  [*]2020/05/11 01:50:37 00000000 s (net) -> CAID: 186A PROVID: 000000, 003411, 008011
  [*]2020/05/11 01:50:37 00000000 s (reader) hd+_hd04 [smartreader] creating thread for device Serial:Reader B363B88
  [*]2020/05/11 01:50:37 00000000 s (main) waiting for local card init
  [*]2020/05/11 01:50:37 38FD03B1 h (webif) webif: decompressed 179887 bytes back into 444048 bytes
  [*]2020/05/11 01:50:37 38FD03B1 h (webif) HTTP Server running. ip=:: port=63254
  [*]2020/05/11 01:50:37 0B2DFF0F r (reader) hd+_hd04 [smartreader] Reader initialized (device=Serial:Reader B363B88, detect=cd, mhz=343, cardmhz=343)
  [*]2020/05/11 01:50:39 00000000 s (main) init for all local cards done
  [*]2020/05/11 01:50:39 00000000 s (anticasc) anti cascading disabled
  [*]2020/05/11 11:18:32 0B2DFF0F r (reader) hd+_hd04 [smartreader] card detected
  [*]2020/05/11 11:18:36 0B2DFF0F r (reader) hd+_hd04 [smartreader] ATR: 3F xx xx xx xx.... 17
  [*]2020/05/11 11:18:36 0B2DFF0F r (reader) hd+_hd04 [smartreader] Effective reader settings mhz =343 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
  [*]2020/05/11 11:18:40 0B2DFF0F r (reader) hd+_hd04 [smartreader] Warning: Card returned error on setting ifsd value to 251
  [*]2020/05/11 11:18:40 0B2DFF0F r (reader) hd+_hd04 [smartreader] detected nagra merlin card in CAK7 mode
  [*]2020/05/11 11:18:41 0B2DFF0F r (reader) hd+_hd04 [smartreader] Rom revision: DNASP420 RevS60
  [*]2020/05/11 11:18:44 0B2DFF0F r (reader) hd+_hd04 [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  [*]2020/05/11 11:18:47 0B2DFF0F r (reader) hd+_hd04 [smartreader] T1 Resync command error, trying to reactivate!
  [*]2020/05/11 11:18:51 0B2DFF0F r (reader) hd+_hd04 [smartreader] ATR: 3F xx xx xx xx.... 17
  [*]2020/05/11 11:18:51 0B2DFF0F r (reader) hd+_hd04 [smartreader] Effective reader settings mhz =343 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
  [*]2020/05/11 11:18:55 0B2DFF0F r (reader) hd+_hd04 [smartreader] Warning: Card returned error on setting ifsd value to 251
  [*]2020/05/11 11:18:55 0B2DFF0F r (reader) hd+_hd04 [smartreader] detected nagra merlin card in CAK7 mode
  [*]2020/05/11 11:18:58 0B2DFF0F r (reader) hd+_hd04 [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  [*]2020/05/11 11:19:02 0B2DFF0F r (reader) hd+_hd04 [smartreader] T1 Resync command error, trying to reactivate!
  [*]2020/05/11 11:19:06 0B2DFF0F r (reader) hd+_hd04 [smartreader] ATR: 3F xx xx xx xx.... 17
  [*]2020/05/11 11:19:06 0B2DFF0F r (reader) hd+_hd04 [smartreader] Effective reader settings mhz =343 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
  [*]2020/05/11 11:19:09 0B2DFF0F r (reader) hd+_hd04 [smartreader] Warning: Card returned error on setting ifsd value to 251
  [*]2020/05/11 11:19:09 0B2DFF0F r (reader) hd+_hd04 [smartreader] detected nagra merlin card in CAK7 mode
  [*]2020/05/11 11:19:13 0B2DFF0F r (reader) hd+_hd04 [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  [*]2020/05/11 11:19:16 0B2DFF0F r (reader) hd+_hd04 [smartreader] T1 Resync command error, trying to reactivate!
  [*]2020/05/11 11:19:20 0B2DFF0F r (reader) hd+_hd04 [smartreader] ATR: 3F xx xx xx xx.... 17
  [*]2020/05/11 11:19:20 0B2DFF0F r (reader) hd+_hd04 [smartreader] Effective reader settings mhz =343 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
  [*]2020/05/11 11:19:24 0B2DFF0F r (reader) hd+_hd04 [smartreader] Warning: Card returned error on setting ifsd value to 251
  [*]2020/05/11 11:19:24 0B2DFF0F r (reader) hd+_hd04 [smartreader] detected nagra merlin card in CAK7 mode
  [*]2020/05/11 11:19:27 0B2DFF0F r (reader) hd+_hd04 [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  [*]2020/05/11 11:19:30 0B2DFF0F r (reader) hd+_hd04 [smartreader] T1 Resync command error, trying to reactivate!
  [*]2020/05/11 11:19:34 0B2DFF0F r (reader) hd+_hd04 [smartreader] ATR: 3F xx xx xx xx.... 17
  [*]2020/05/11 11:19:34 0B2DFF0F r (reader) hd+_hd04 [smartreader] Effective reader settings mhz =343 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
  [*]2020/05/11 11:19:38 0B2DFF0F r (reader) hd+_hd04 [smartreader] Warning: Card returned error on setting ifsd value to 251
  [*]2020/05/11 11:19:38 0B2DFF0F r (reader) hd+_hd04 [smartreader] detected nagra merlin card in CAK7 mode
  [*]2020/05/11 11:19:38 0B2DFF0F r (reader) hd+_hd04 [smartreader] ready for requests
  [*]2020/05/11 11:19:38 0B2DFF0F r (reader) hd+_hd04 [smartreader] found card system nagra merlin
  [*]2020/05/11 11:19:38 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
  [*]2020/05/11 11:19:38 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] ROM: D N A S P 4 2 0
  [*]2020/05/11 11:19:38 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] REV: R e v S 6 0
  [*]2020/05/11 11:19:38 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] SER: ############
  [*]2020/05/11 11:19:38 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] CAID: 0000
  [*]2020/05/11 11:19:38 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] Prv.ID: FF FF FF FF (sysid)
  [*]2020/05/11 11:19:42 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  [*]2020/05/11 11:19:45 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] T1 Resync command error, trying to reactivate!
  [*]2020/05/11 11:19:49 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] ATR: 3F xx xx xx xx.... 17
  [*]2020/05/11 11:19:49 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] Effective reader settings mhz =343 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
  [*]2020/05/11 11:19:53 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] Warning: Card returned error on setting ifsd value to 251
  [*]2020/05/11 11:19:53 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] detected nagra merlin card in CAK7 mode
  [*]2020/05/11 11:19:53 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] -----------------------------------------
  [*]2020/05/11 11:19:53 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] |id |tier |valid from |valid to |
  [*]2020/05/11 11:19:53 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] +----+--------+------------+------------+
  [*]2020/05/11 11:19:56 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  [*]2020/05/11 11:19:59 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] T1 Resync command error, trying to reactivate!
  [*]2020/05/11 11:20:03 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] ATR: 3F xx xx xx xx.... 17
  [*]2020/05/11 11:20:03 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] Effective reader settings mhz =343 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
  [*]2020/05/11 11:20:07 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] Warning: Card returned error on setting ifsd value to 251
  [*]2020/05/11 11:20:07 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] detected nagra merlin card in CAK7 mode
  [*]2020/05/11 11:20:07 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] -----------------------------------------

hier meine config
oscam server

Spoiler

[reader]
label = hd+_hd04
protocol = smartreader
device = Serial:Reader B363B88
autospeed = 0
caid = 186A
mod1 = 9D..63
mod2 = 86..1B
key3588 = FF..4C
data50 = B6..92
mod50 = DB..D5
key60 = 99..EB
exp60 = 26..21
nuid = 84..1E
cwekey = 1B..C6
idird = FFFFFFFF
cak7_mode = 1
detect = cd
nagra_read = 2
detect_seca_nagra_tunneled_card= 0
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-g = 1

oscam config

Spoiler

[global]
logfile = /var/log/oscam.log
logduplicatelines = 1
unlockparental = 1
waitforcards = 0
preferlocalcards = 1
lb_mode = 3
disablecrccws_only_for = 0500:50F000;098C:000000;09C4:000000;098D:000000;0500:030B00

und hier die log von dreambox

• Spoiler

  2020/05/11 09:32:56 00000000 s (main) System name = Linux
  [*]2020/05/11 09:32:56 00000000 s (main) Host name = dm7080
  [*]2020/05/11 09:32:56 00000000 s (main) Release = 3.4-4.0-dm7080
  [*]2020/05/11 09:32:56 00000000 s (main) Version = #1 SMP Tue Jul 25 13:32:41 CEST 2017
  [*]2020/05/11 09:32:56 00000000 s (main) Machine = mips
  [*]2020/05/11 09:32:56 00000000 s (main) Stb model = dm7080
  [*]2020/05/11 09:32:56 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 8126
  [*]2020/05/11 09:32:56 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  [*]2020/05/11 09:32:56 00000000 s (main) signal handling initialized
  [*]2020/05/11 09:32:56 00000000 s (config) 14 provid's loaded
  [*]2020/05/11 09:32:56 00000000 s (config) 172 service-id's loaded in 2 ms
  [*]2020/05/11 09:32:56 00000000 s (net) cs378x: initialized (fd=5, port=5462)
  [*]2020/05/11 09:32:56 00000000 s (net) newcamd: initialized (fd=6, port=4256)
  [*]2020/05/11 09:32:56 00000000 s (net) cccam: initialized (fd=7, port=2548)
  [*]2020/05/11 09:32:56 00000000 s (reader) hd+_hd04 [internal] creating thread for device /dev/sci0
  [*]2020/05/11 09:32:56 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
  [*]2020/05/11 09:32:56 6038ABCA r (reader) hd+_hd04 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz)
  [*]2020/05/11 09:32:56 6038ABCA r (reader) hd+_hd04 [internal] Reader sci internal, detected box type: dm7080
  [*]2020/05/11 09:32:56 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
  [*]2020/05/11 09:32:56 08F3739A c (client) plain dvbapi-client granted (dvbapiau, au=auto (13 reader))
  [*]2020/05/11 09:32:56 08F3739A c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache
  [*]2020/05/11 09:32:56 08F3739A c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
  [*]2020/05/11 09:32:56 08F3739A c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 8
  [*]2020/05/11 09:32:56 0897DFC7 h (webif) webif: decompressed 165686 bytes back into 402472 bytes
  [*]2020/05/11 09:32:56 0897DFC7 h (webif) HTTP Server running. ip=:: port=7080
  [*]2020/05/11 09:32:57 08F3739A c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CCC PROVID: 000000
  [*]2020/05/11 09:32:57 08F3739A c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19CC PROVID: 000000
  [*]2020/05/11 09:32:57 08F3739A c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1860 ECM_PID: 1ECC PROVID: 000000
  [*]2020/05/11 09:32:57 08F3739A c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1ACC PROVID: 000000
  [*]2020/05/11 09:32:57 08F3739A c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
  [*]2020/05/11 09:32:57 08F3739A c (dvbapi) Demuxer 0 ecmpid 5 CAID: 06CB ECM_PID: 0078 PROVID: 000000
  [*]2020/05/11 09:32:57 08F3739A c (dvbapi) Demuxer 0 ecmpid 6 CAID: 186A ECM_PID: 1FCC PROVID: 000000
  [*]2020/05/11 09:32:57 08F3739A c (dvbapi) Demuxer 0 ecmpid 7 CAID: 186D ECM_PID: 1FCD PROVID: 000000
  [*]2020/05/11 09:32:57 08F3739A c (dvbapi) Demuxer 0 ecmpid 8 CAID: 098D ECM_PID: 0108 PROVID: 000000
  [*]2020/05/11 09:32:57 08F3739A c (dvbapi) Demuxer 0 ecmpid 9 CAID: 1842 ECM_PID: 1FDF PROVID: 000000
  [*]2020/05/11 09:32:57 08F3739A c (dvbapi) Demuxer 0 ecmpid 10 CAID: 4B64 ECM_PID: 1FDF PROVID: 000000
  [*]2020/05/11 09:32:57 08F3739A c (dvbapi) Demuxer 0 found 11 ECM pids and 7 STREAM pids in CA PMT
  [*]2020/05/11 09:32:57 08F3739A c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
  [*]2020/05/11 09:32:57 6038ABCA r (reader) hd+_hd04 [internal] card detected
  [*]2020/05/11 09:32:59 6038ABCA r (reader) hd+_hd04 [internal] ATR: 3F xx xx xx xx.... 17
  [*]2020/05/11 09:32:59 6038ABCA r (reader) hd+_hd04 [internal] detected nagra merlin card in CAK7 mode
  [*]2020/05/11 09:33:00 6038ABCA r (reader) hd+_hd04 [internal] Rom revision: DNASP420 RevS60
  [*]2020/05/11 09:33:01 08F3739A c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  [*]2020/05/11 09:33:01 6038ABCA r (reader) hd+_hd04 [internal] ready for requests
  [*]2020/05/11 09:33:01 6038ABCA r (reader) hd+_hd04 [internal] found card system nagra merlin
  [*]2020/05/11 09:33:01 6038ABCA r (reader) hd+_hd04 [nagra merlin] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
  [*]2020/05/11 09:33:01 6038ABCA r (reader) hd+_hd04 [nagra merlin] ROM: D N A S P 4 2 0
  [*]2020/05/11 09:33:01 6038ABCA r (reader) hd+_hd04 [nagra merlin] REV: R e v S 6 0
  [*]2020/05/11 09:33:01 6038ABCA r (reader) hd+_hd04 [nagra merlin] SER: ############
  [*]2020/05/11 09:33:01 6038ABCA r (reader) hd+_hd04 [nagra merlin] CAID: 186A
  [*]2020/05/11 09:33:01 6038ABCA r (reader) hd+_hd04 [nagra merlin] Prv.ID: 00 00 34 11 (sysid)
  [*]2020/05/11 09:33:01 6038ABCA r (reader) hd+_hd04 [nagra merlin] Provider Sys ID: 34 11 is active to: 2020/07/02
  [*]2020/05/11 09:33:01 00000000 >> OSCam << cardserver log switched, version 1.20_svn, build r11578 (mipsel-oe-linux)
  [*]2020/05/11 09:33:01 6038ABCA r (reader) hd+_hd04 [nagra merlin] -----------------------------------------
  [*]2020/05/11 09:33:01 6038ABCA r (reader) hd+_hd04 [nagra merlin] |id |tier |valid from |valid to |
  [*]2020/05/11 09:33:01 6038ABCA r (reader) hd+_hd04 [nagra merlin] +----+--------+------------+------------+
  [*]2020/05/11 09:33:01 6038ABCA r (reader) hd+_hd04 [nagra merlin] |8011|006A |2020/05/05 |2021/05/06 |
  [*]2020/05/11 09:33:02 6038ABCA r (reader) hd+_hd04 [nagra merlin] |8011|006B |2014/01/01 |2014/01/02 |
  [*]2020/05/11 09:33:02 6038ABCA r (reader) hd+_hd04 [nagra merlin] -----------------------------------------
  [*]2020/05/11 09:33:02 6038ABCA r (reader) hd+_hd04 [nagra merlin] Prv.ID: 00 00 00 00
  [*]2020/05/11 09:33:02 6038ABCA r (reader) hd+_hd04 [nagra merlin] Prv.ID: 00 00 80 11
  [*]2020/05/11 09:33:02 08F3739A c (dvbapi) Demuxer 0 restarting decoding requests after 4531 ms with 1 enabled and 10 disabled ecmpids!
  [*]2020/05/11 09:33:02 08F3739A c (dvbapi) Demuxer 0 trying to descramble PID 6 CAID 186A PROVID 000000 ECMPID 1FCC ANY CHID PMTPID 0060 VPID 00FF
  [*]2020/05/11 09:33:02 08F3739A c (ecm) dvbapiau (186A@000000/0000/EF10/8F:268FF76967A6F11CDF823E034782743D): found (142 ms) by hd+_hd04 - RTL HD
  [*]2020/05/11 09:33:03 08F3739A c (ecm) dvbapiau (186A@000000/0000/EF10/8F:C51650D653C1D2C0D51130A73A0381B7): found (140 ms) by hd+_hd04 - RTL HD

 

[ghost0815]

2020/05/11 11:19:38 0B2DFF0F r (reader) hd+_hd04 [nagra merlin] CAID: 0000

Das ist das Problem....
Die Karte lief um ca halb 10 in der Dream, im Server hast du im ca 11:20 Caid 0000.

Karte ins Modul, warten bis es hell wird, dann wieder in den Server...

 

[dodo83]

welche OScam Version wird auf dem Server genutzt überhaupt?

 

[ghost0815]

Wenn er sie in den letzten Tagen nicht geändert hat, 11571

28.04.2020 OSCam: 1.20_svn Build: r11571 Compiler: x86_64-linux-gnu

neuere findet er hier...
-->OScam

bzw. könnte er auf seinem Server eine eigene bauen...
-->OScam Self-made (kompilieren)

Edit:
11578 im Anhang

 

[jeanpaul]

Hallo
das ist mein Problem, ich weis nichts wie Mann oscam kompilieren

mit oscam von ghost0815
ist gleich
CARDOK

Sie müssen registriert sein, um Links zu sehen.

 

[dodo83]

Sicher das die läuft oder immer noch die ältere Version?
Log ab start?
Wie man selber kompiliert würde dir oben auch verlinkt von @ghost0815

 

[jeanpaul]

ja ich habe versucht aber keine erfolg
folgende gemacht
cd /tmp
apt-get install cvs subversion
apt-get install autoconf libccid automake libtool gettext make cmake
apt-get install patch ncurses-bin gcc g++ flex bison pkg-config libpng3
apt-get install libusb-1.0-0 libusb-1.0-0-dev
svn checkout

Sie müssen registriert sein, um Links zu sehen.

oscam-svn
cd oscam-svn/
make allyesconfig
mkdir c
cd c
cmake -DWEBIF=1 ..
make
killall -9 oscam
cp oscam /bin/oscam

ich habe so gemacht, ist es richtig

wenn ich diese version probiere
OSCam: 1.20_svn Build: r11577 Compiler: x86_64-linux-gnu

ich sehe keine reader weil
cardreader_smartreader: no

 

[dodo83]

Ob die neue Oscam läuft siehst nur du, da musst du schon das neue Log ab start Posten wo man sieht welche es auch ist