Quantcast
Aktuelles
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

CCcam 2.3.2 ARM für Vu4k - Ultimo4k solo4k solo4kse uno4k

uf2k

Spezialist
Registriert
20. Juni 2009
Beiträge
631
Reaktionspunkte
1.396
Punkte
273
Ort
Schlummerland
Habe eine ipk erstellt nur für die Ultimo4k, sollte auch bei der solo4k, solo4kse, uno4k, Zero 4K
arbeiten.

Hinweis nur für VTI Image

2.3.2
-several network fixes
released 03 Mar 2018 14:26:24

2.3.1
-remove all emu
-several network fixes
-released 25 Feb 2018 21:41:46

2.3.0
-add seca tunneled nagra card support (may need card reset to see new revision after updating)
-add SID LIMIT (see CCcam.cfg for details)
-several smartcard fixes
-several network fixes

2.2.1
-added via 3.0 emu (add working key in SoftCam.Key)
-fixed parsing GLOBAL EMM setting
-fixed occasional freeze (bug since 2.2.0)
-random loadbalance preference
-smartcard fixes

2.2.0
-several smartcard fixes
-added SCIDEVICES setting (see CCcam.cfg for details)
-fixed timings display
-fixed possible crash with SMP
-don't clear SMARTCARD SID ASSIGN and LOADBALANCE settings when configfile changes (changing these settings requires a restart, so they should not be touched when config is re-read)
-added SMARTCARD SID REJECT (see CCcam.cfg for details)
-distribute ASSIGN/REJECT info to clients to improve performance (needs 2.2.0 server and clients)
-improved detecting when CCcam.cfg has changed
-added GLOBAL EMM setting (clientside), to control generation of GA EMM traffic (see CCcam.cfg for details)

2.1.4
-ndz smartcard fixes
-ecm timeout decreased
-via26 emu
-seca handler improvement

2.1.3
-important cardreader fixes
-DRE crypt support
-963 support
-reenabled n2 emu

2.1.2
-several smartcard fixes
-via emm fixes
-seca emm fixes
-added SMARTCARD SID ASSIGN, see CCcam.cfg for details
-TNT sat
-double login loop fix
-serverside emm overload fix

2.1.1
-fixed MINIMUM CLIENT VERSION check, broken since 2.1.0
-several smartcard fixes

2.1.0
-keep persistant ecm counts for clients
-i2 emu
-IGNORE NODE option (see CCcam.cfg)
-emm caid tunneling
-Added seca handler to prefer or ignore SECA2 or SECA3 (see CCcam.cfg)

2.0.11
-support caid tunnelling
-improved chid selection

2.0.10
-improved system selection (based on distance). Note that prios from prio file overrule this and might give worse results
-fixed aborting lengthy request when switching channels
-fixed low audio pid detection

2.0.9
-improved system selection
-fixed irdeto chid selection
-dm800 detection
-fixed minor memleak

2.0.8
-fixed n2 emu freezes with static (non-openssl) version
-improved system selection (making prio file mostly obsolete)

2.0.7
-fixed camcrypt on static (non-openssl) version
-fixed segfault reading config

2.0.6
-ignore errors on emm demux (caused n2 AU to abort on certain hardware)
-tps au fix
-various optimizations; avoid server slowing down because of slow clients

2.0.5
-global share limits (see CCcam.cfg for details)
-global minimum required downhops setting (see CCcam.cfg for details)
-n2 AU fix (/var/keys/ROM120.bin required)
-cryptoworks sc fix
-90f sc fix
-viaccess sc emm fix
-changed 'double client login reject' mechanism
-G line local sharing fixed
-graceful shutdown

2.0.4
-support more than one emm listener (see CCcam.cfg for details)
-tps au fixes
-nds sc init fix

2.0.3
-nagra fixes
-G line remote sharing fixed
-allow more limits in C/F/G

2.0.2
-nagra fixes
-irdeto camcrypt
-tps au
-cryptoworks keys no longer hardcoded

2.0.1
-changed G: line syntax, see CCcam.cfg for details
-multiple G: lines on the same local port supported
-each G: line can have different localhost
-each G: line can have different pass
-sharing between G: lines supported
-nagra2 MECM

2.0.0
-removed gbox_indirect support
-added gbox support
-several smartcard fixes
-several smartcard reader fixes
-fixed LOADBALANCE parsing (broken in 1.7.1)

1.7.1
-several smartcard fixes
-conax ca pin support (use 'PIN:' in CCcam.cfg)
-added SMARTCARD WRITE DELAY setting, to tweak performance on mastera/sc8in1 and such
-moved providernames to an external file /var/etc/CCcam.providers. Format is 'hexvalue "providername" comments'
-channelname can now be displayed in webif instead of caid:ident:sid when defined in /var/etc/CCcam.channelinfo
-demuxapi support dropped
-gbox indirect: reuse slots
-avoid glitch when zapping over recorded channel (7025)
-two cam devices on DM600

1.7.0
-fixed password bug (consider using "MINIMUM CLIENT VERSION: 1.7.0" to avoid risk)
-added viaccess smartcard emm
-added support for gbox indirect/local connection
-added optional ip address/hostname to F: line, no ip given allows the connection from all ip's (See CCcam.cfg for example)
-tps au (tune to Hotbird transponder 10873 vertical)
-added smartcard custom post-init (see CCcam.cfg) Currently only T=0 supported
-support to override detected dvb api version
-support sc8in1 (note: PHOENIX READER PATH --> SERIAL READER in CCcam.cfg)

1.6.2
-fixed crash when reading malformed SoftCam.Key
-fixed possible crash betacrypt smartcard emm
-minor irdeto improvements
-added config option to avoid (hidden) chids being ignored on irdeto smartcard (See CCcam.cfg)
-added timeslots per friend connection, now possible to only open connection for a few hours (See CCcam.cfg for example)
-Nagra emu fixes

1.6.1
-fixed irdeto camdata setting (setting was not used correctly in 1.6.0)
-CCcam.prio: nagra caid:ident entries with nonzero ident now always match
(nagra ident is unknown at time of prio check, see CCcam.cfg for details)
-few small workarounds for buggy 7025 scidriver
-show share (nodeid_handlerid) in ecm.info
-tps.bin support (fixed location /var/keys/tps.bin), using systemtime

1.6.0
-fixed wrong irdeto camdata default (since 1.4.0)
-implemented irdeto camdata setting
-improved self learning for irdeto
-fixed constant cw
-added biss support
-added priolist support
-max C / F username length now 20 instead of 19
-max C / F password length now unlimited instead of 16
-switches to enable/disable web and telnet info info interfaces
-implemented authentication for web and telnet info interfaces
-Note: the web and telnet info port paramater have changed name in the config file
-Note2: /var/keys/CCcam.ignore does not exist anymore and /var/etc/CCcam.prio is the new one
see CCcam.cfg for details

1.5.0
-improved dvb api detection (for systems with both demuxapi and dvb devicenodes)
-avoid exit on systems that provide nonworking dvb devicenodes
-avoid blocking on nonworking newcamd connection (since 1.4.0)
-added column in client info output to see the ecm time per client, only available if SHOW TIMING is on
-reworked share and provider info into tabular form

1.4.0
-implemented irdeto camkey setting
-runtime dvb api version detection
-implemented share limits on client side (just like server side), see CCcam.cfg for details
-implemented load balancing between identical cards, see CCcam.cfg for details
-finetuned tcp behaviour and settings, saving some network load
-fixed newcamd connection emm
-seca smartcard entitlements fix
-irdeto smartcard emm fix
-removed -k cmdline parm, use config file instead
-cmdline parms could previously be overruled by rereading cfg file, fixed

1.3.1
-7025: several bugfixes
-7025: decoding of all 8 channels (1.3.0 only 4)
-fixed viaccess smartcard
-fixed stealth mode, also set per N line now (see CCcam.cfg)

1.3.0
-fixed some 64 bits issues
-fixed radegast provider id and nano field
-reduced binary size
-immediately interrupt lengthy emu calculations when zap takes place
-userinfo was not correctly reread, therefore you needed to restart CCcam when certain parts of the userinfo changed, fixed
-it is now possible to block a channel for a client, based on caid:id:sid see F entry config for an example
-changed emu share limits behaviour, <1.3.0 an emu matched a F entry limit with {caid:ident:n}, for any nonzero ident. >=1.3.0, an emu only matches {caid:0:n}
-added '-l' cmdline option, to disable all 'self-learning' stuff. This option might avoid problems with irdeto smartcards
-ports 15000-15004 and port 14000 are now gone. Use 16000 and 16001 (html) instead
-implemented workerthread pool to handle client requests, to improve handling larger numbers of clients
-added support for cryptoworks camcrypted cards (incl arena tv). IPK handing is internal, no need for external keys and such
-added support for BEEF patched cards using nagra over seca tunnelling, add id's in config file(see example)
-added conax smartcard support (ecm+emm)
-added entitlements for cryptoworks and conax smartcards
-allow emm one extra level

1.2.1
-fixed smartcard support for some seca providers
-fixed smartcard activation for some seca providers

1.2.0
-fixed betacrypt entitlements
-fixed betacrypt emm
-fixed nds entitlements
-fixed nds freeze with certain ecm on phoenix
-irdeto emu emm added
-seca emu added
-initialise all cards before starting to decode, ensures immediate success on startup
-restart emm when a card is inserted, for easier activation of new cards
-faster client ecm handling (new client logon no longer delays requests of existing clients)
-command-based info interface on port 16000
-web info interface on port 16001
(As of now getting info from ports 15000-15004 is deprecated. This interface will be removed in the next release.)
-newcamd stealth mode added
-removed <1.1.1 backward compatibility code from share protocol, to allow full use of optimisations introduced in 1.1.1
-when CCcam was connecting to a share it kept on connecting on same ip, not very good when a dyndns address was in the config
-ecm request cache didn't work in all situations, caching fixed and improved.
-emm didn't always work on demuxapi systems (e.g. relook, mutant). Fixed.
-WARNING: F: entry syntax changed, check and update your CCcam.cfg; added parameters to allow emusharing and emm, per client

1.1.1
-when a share doesn't work for a certain channel, skip aliases of that share for that channel
(aliases are the same cards shared through different routes, they have equal nodeID_shareID at the end of their line in the output on port 15002)
-ignore '0' providerids on seca cards
-nagra2 emu fix for some providers
-fixed occasional nds emm freeze
-allow multiple L: entries to connect to different cards on the same camd3 server/port
-fixed phoenix on certain comport chipsets
-optimized share protocol (backward compatibility with <1.1.1 guaranteed, warning, will be removed in next release)

1.1.0
-camd3 support, one card per L: line
-support to add downshare limits to F: entries

1.0.0
-first public release
-various smartcards
-various emus
-share2share support (C: and F: entry)
-newcamd support (N: entry)
-radegast support (R: entry)
-all shares are available for clients on a single port (default 12000)
-emu's can be shared one hop down only
-cards can be shared multiple hops down
-each CCcam node has a unique nodeid
-routes to a card are given with nodelists
-when a card is reachable through multiple routes, each unique route will be available as individual share
-shares with nodeid 'abc' in the routelist are never sent to client with nodeid 'abc', to avoid route loops
-watch your shares, including full routelist, on port 15002
-start with -h to view available commandline options
-syslog support, start with -v for more verbosity
-start with -d to run in foreground, and log to console instead of syslog
-inserted cards (in either available reader) start working right away
-all used config and key files are re-read on change, never need to restart CCcam

-d run in the foreground (implies -v and -q)
-v be verbose
-q don't use syslog (use on old systems)
-C <configfile> use <configfile> instead of default (%s)
-f filter on specific demux data (saves some CPU,but some platforms might not handle this very well)
-n show network packets
-s disable server
-t show timing
-l disable self-learning capabilities

CCcam 2.3.1 released on 25 Feb 2018 21:41:46
IPK: Download

Neu:
CCcam 2.3.2 released on 03 Mar 2018 14:26:24
IPK: Download nur für VTI Image
ZIP: Download beinhaltet CCcam.mips32el, CCcam.x86_64 und CCcam.armv7ve

Die libstdc++.so.6.0.20 die in der ipk vorhanden ist, ist die
Nach den Installation, wird die originale /usr/lib/libstdc++.so.6.0.20 als backup in /usr/lib/libstdc++.so.6.0.20.old umbenannt.

Viel Spaß
 

Anhänge

Du musst angemeldet sein, um die Anhangsliste zu sehen.
Zuletzt bearbeitet:
Nix anderes als alle alten CCcam Versionen (ausser Emu, der wurde komplett entfernt).
 
Läuft halt auf ARM Boxen, was vorher nicht der fall war

Gesendet von meinem LG-H850 mit Tapatalk
 
Hi.
Mal ne blöde Frage. In welchen Ordner kommt die cccam.cfg ?


Gesendet von meinem SM-N9005 mit Tapatalk
 
bei atv kommt die aber nach keys

edit schleppe mein starscipt seit jahren immer mit, installiere nur von hand
 
Zuletzt bearbeitet:
Ihr müsst mir nochmal helfen.
Bin jetzt von VTI auf ATV 6.2 gewechselt.
Hab das Softcamfeet installiert und die ipk für Cccam draufgebügelt.
Leider habe ich jetzt keine Möglichkeit die cccam auszuwählen. Wenn ich jetzt aber oscam vom feed installiere habe ich die Möglichkeit.
Jemand ne Idee ?

Gesendet von meinem SM-N9005 mit Tapatalk
 
Menü / Info Panel / Softcam-Panel / Whäle Cam 1 mit links oder rechts Pfeil uswählen und starten...
 
Ja is schon klar. Er zeigt mir aber cccam 2.3.1 nicht an.

Gesendet von meinem SM-N9005 mit Tapatalk
 
Zuletzt bearbeitet von einem Moderator:
Jep

Gesendet von meinem SM-N9005 mit Tapatalk
 
Zuletzt bearbeitet von einem Moderator:
Leider nein.
Hab die ipk. in temp. Verzeichniss kopiert und dann mit 0 Fehlern installiert und Neustart gemacht.
 
Zurück
Oben