card detect fail

darki86 · 15. November 2008

NAAAAABEND,
Bin ma wieder am bastelln, es geht um meinen debian cccam card server...
der server rennt wie ne 1, habe CCcam 2.10.0 am laufen. aber irgendwie mag
der meine Karte nicht ... weis da einer ne abhilfe? ich habe eine Phoenix smartmouse
darn hängen mit 3.85Mhz und 6Mhz Modus, habe die mouse auf 6Mhz gesezt.
Der serielle port müsste theoretisch eigentlich auch passen...

CODE :

serv:/emu/cccam# ./CCcam.x86 -d
19:53:41.235 CCcam: ======================================================================
19:53:41.236 CCcam: starting CCcam 2.0.10 compiled on Nov 1 2008@19:01:02
19:53:41.236 CCcam: ======================================================================
19:53:41.236 CCcam: online using nodeId 1c09e1448714c60d
19:53:41.239 CCcam: create 1 cam device(s)
19:53:41.760 CCcam: card detect fail
19:53:41.760 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
19:53:41.760 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
19:53:41.761 CCcam: static cw not found or bad
19:53:41.761 CCcam: parsed 0 entries from /var/etc/CCcam.prio
19:53:41.765 CCcam: added 510 provider names from /var/etc/CCcam.providers
19:53:41.765 CCcam: added 4 channel names from /var/etc/CCcam.channelinfo
19:53:41.765 CCcam: server started on port 7545
19:53:42.288 CCcam: card detect fail
19:53:43.816 CCcam: card detect fail

---------------------------------------------------------

meine cccam.cfg sieht so aus :

SERVER LISTEN PORT : 7545

PHOENIX READER PATH : /dev/ttyS0

# SERIAL READER : /dev/ttyS0

DISABLE EMM : yes

#---------------------------------------------------------------------#

F: ich ich

F: wohnzimmer wohnzimmer

#---------------------------------------------------------------------#

# SOFTKEY FILE : /var/keys/SoftCam.Key
# AUTOROLL FILE : /var/keys/AutoRoll.Key
# STATIC CW FILE : /var/keys/constant.cw
# CAID PRIO FILE : /var/etc/CCcam.prio
# PROVIDERINFO FILE : /var/etc/CCcam.providers
# CHANNELINFO FILE : /var/etc/CCcam.channelinfo
# LOG WARNINGS : /tmp/warnings.txt

# WEBINFO LISTEN PORT : 16001
# SHOW EXTENEDED CLIENT INFO : no
# WEBINFO USERNAME : <Benutzername>
# WEBINFO PASSWORD : <Passwort>

#---------------------------------------------------------------------#

darki86 · 16. November 2008

AW: card detect fail

keiner ne Ahung ? :-$

Nasher · 16. November 2008

AW: card detect fail

ich glaube cccam läuft nur in kombination mit newcs.
ist beim multicam so, daher kann es sein, das es bei externen cardreader auch so ist.

darki86 · 16. November 2008

AW: card detect fail

mhhhhhhhhhhhhhhh stimmt ... hab ich ganz übersehen... wer lesen kan, ist klar im vorteil ^^ ....

wen man mit CCcam oder Mgcam arbeiten will muss man dan ja von newcs auf ein xtra cam gehen... wieso nimmt man nicht einfach newcs zu sharen ?

@nd1 · 16. November 2008

AW: card detect fail

Sag doch erstmal noch was für ne Karte du da drin hast

darki86 · 16. November 2008

AW: card detect fail

öhm is ne nds karte von pw

@nd1 · 16. November 2008

AW: card detect fail

Die NDS Karte läuft schonmal nur mit 3,57 Mhz, sonst geht erstmal gar nix

darki86 · 16. November 2008

AW: card detect fail

mhhh öhm lag ich ma wieder falsch^^
gut , hab nun die smartmouse umgestellt, und werde nacher noch nen versuch starten.
aber wieso nimmt man nicht gleich newcs sonder geht über 2 emus zum ziel ?

@nd1 · 16. November 2008

AW: card detect fail

NewCS ist einfach ein klasse Cardserver, der mit vielen Karten, sowie halt auch mit vielen Boxen bzw. Anschlüssen umgehen kann und wenn man wie ich ne dbox2 hat kommt man net drumrum NewCS einzusetzen, denn das CCcam kann das Multicam in der dbox2 nicht direkt ansprechen, sondern nur die Kartenleser am seriellen Anschluss, aber NewCS kann es und deswegen sehr nützlich. Meine Conax Karte z.B. kriegte ich in der CCcam direkt auch net zum Laufen, ob es überhaupt geht weiß ich gar net, dann halt Umweg über NewCS probiert und Problem war gelöst...

darki86 · 17. November 2008

AW: card detect fail

sooo hab nun die smartmouse auf 3,579 Mhz stehn, aber irgendwie will das immer noch nicht so ganz ... das ganze versuche ich gerade mit newcs... die fehlermeldung schaut so aus "Card 0900 on port /dev/ttyS0 failed"

hier meine config ....

<?xml version="1.0"?>
<!--

For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around

)

The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.

** This is the example file for Phoenix Interface.

-->

<newCSconfig>
<readers name="Phoenix">
<device>
<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>357</mhz>
<node>/dev/ttyS0</node>
<parity>even</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>


<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>

</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>

<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>

<name>newcs</name>

<password>newcs</password>

<accesslevel>admin</accesslevel>
</user>
</httpd>

<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>

<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>

<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>localhost</hostname>
<port>34000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
</newcamdserver>

</newCSconfig>

@nd1 · 17. November 2008

AW: card detect fail

Hier liegt dein Fehler



Die Kommentarzeichen raus und 8 Nullen rein, also so

<boxkey>00000000</boxkey>

war auch mein Fehler zu anfangs, die NDS Karte bootet nicht ohne einen Boxcode und da Premiere die Boxen mit der Karte nicht verheiratet ist der einfach 8mal die 0

darki86 · 17. November 2008

AW: card detect fail

YEEEEEHAAAA , DANKE !!!!

jez macht er schon mehr

Aber ich glaube da sitmmt immer noch was nicht ganz mit der config ...

erst schreit er [ 19:06:16 ] [ NewCS ] Ready to GO!

und dan kommt Card 0900 on port /dev/ttyS0 failed

Code :

serv:~# newcs start
[SCRIPT] start: NewCS Server
This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:40:27
Reading Config file from /etc/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 19:06:12 ] [ Box detect ] Box type 1 (General Boxtype - PC compatible)
[ 19:06:12 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to NO
[ 19:06:12 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 19:06:12 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 19:06:12 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 19:06:12 ] [ Config ] /dev/ttyS0 ECM priority: round
[ 19:06:12 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 19:06:12 ] [ EMM Cache ] Initialising dynamic Cache
[ 19:06:12 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2161
[ 19:06:12 ] [ Loader ] Starting Telnet on port 1001
[ 19:06:12 ] [ Loader ] Started HTTP-server on port: 8080
[ 19:06:12 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 19:06:12 ] [ Phoenix ] Opening device /dev/ttyS0
[ 19:06:12 ] [ Phoenix ] Setting Parity to: ODD
[ 19:06:12 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 19:06:12 ] [ Phoenix ] Setting Baud to standard 9600
[ 19:06:13 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
serv:~# [ 19:06:14 ] [ ATR ] T=0 1etu=13.02us Guardtime:15etu WWT:76800etu
[ 19:06:14 ] [ ATR ] Historical bytes: T [B0] [01] i [FF] J P p [00] [00] K W [01] [00] [00]
[ 19:06:14 ] [ Loader ] Init NDS card
[ 19:06:14 ] [ Phoenix ] Setting Parity to: ODD
[ 19:06:14 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 19:06:14 ] [ Phoenix ] Setting Baud to custom 76800
[ 19:06:16 ] [ Loader ] Card 0900 on port /dev/ttyS0 failed
[ 19:06:16 ] [ Loader ] Starting Newcamd Server on port 15000
[ 19:06:16 ] [ Newcamd ] Newcamd thread Server started on port 15000
[ 19:06:16 ] [ NewCS ] Ready to GO!

[ 19:06:16 ] [ Loader ] Reinit card with caid 0900
[ 19:06:16 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 19:06:16 ] [ Phoenix ] Opening device /dev/ttyS0
[ 19:06:16 ] [ Phoenix ] Setting Parity to: ODD
[ 19:06:16 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 19:06:16 ] [ Phoenix ] Setting Baud to standard 9600
[ 19:06:16 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 19:06:18 ] [ ATR ] T=0 1etu=13.02us Guardtime:15etu WWT:76800etu
[ 19:06:18 ] [ ATR ] Historical bytes: T [B0] [01] i [FF] J P p [00] [00] K W [01] [00] [00]
[ 19:06:18 ] [ Loader ] Init NDS card
[ 19:06:18 ] [ Phoenix ] Setting Parity to: ODD
[ 19:06:18 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 19:06:18 ] [ Phoenix ] Setting Baud to custom 76800
[ 19:06:19 ] [ Loader ] Card 0900 on port /dev/ttyS0 failed
[ 19:06:19 ] [ Loader ] Reinit card with caid 0900
[ 19:06:19 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 19:06:19 ] [ Phoenix ] Opening device /dev/ttyS0
[ 19:06:19 ] [ Phoenix ] Setting Parity to: ODD
[ 19:06:19 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 19:06:19 ] [ Phoenix ] Setting Baud to standard 9600
[ 19:06:19 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 19:06:20 ] [ ATR ] T=0 1etu=13.02us Guardtime:15etu WWT:76800etu
[ 19:06:20 ] [ ATR ] Historical bytes: T [B0] [01] i [FF] J P p [00] [00] K W [01] [00] [00]
[ 19:06:20 ] [ Loader ] Init NDS card
[ 19:06:20 ] [ Phoenix ] Setting Parity to: ODD
[ 19:06:20 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 19:06:20 ] [ Phoenix ] Setting Baud to custom 76800
[ 19:06:22 ] [ Loader ] Card 0900 on port /dev/ttyS0 failed
[ 19:06:22 ] [ Loader ] Reinit card with caid 0900
[ 19:06:22 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 19:06:22 ] [ Phoenix ] Opening device /dev/ttyS0
[ 19:06:22 ] [ Phoenix ] Setting Parity to: ODD
[ 19:06:22 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 19:06:22 ] [ Phoenix ] Setting Baud to standard 9600
[ 19:06:22 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 19:06:23 ] [ ATR ] T=0 1etu=13.02us Guardtime:15etu WWT:76800etu
[ 19:06:23 ] [ ATR ] Historical bytes: T [B0] [01] i [FF] J P p [00] [00] K W [01] [00] [00]
[ 19:06:23 ] [ Loader ] Init NDS card
[ 19:06:23 ] [ Phoenix ] Setting Parity to: ODD
[ 19:06:23 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 19:06:23 ] [ Phoenix ] Setting Baud to custom 76800
[ 19:06:25 ] [ Loader ] Card 0900 on port /dev/ttyS0 failed
[ 19:06:25 ] [ Loader ] Reinit card with caid 0900
[ 19:06:25 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 19:06:25 ] [ Phoenix ] Opening device /dev/ttyS0
[ 19:06:25 ] [ Phoenix ] Setting Parity to: ODD
[ 19:06:25 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 19:06:25 ] [ Phoenix ] Setting Baud to standard 9600
[ 19:06:25 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 19:06:26 ] [ ATR ] T=0 1etu=13.02us Guardtime:15etu WWT:76800etu
[ 19:06:26 ] [ ATR ] Historical bytes: T [B0] [01] i [FF] J P p [00] [00] K W [01] [00] [00]
[ 19:06:26 ] [ Loader ] Init NDS card
[ 19:06:26 ] [ Phoenix ] Setting Parity to: ODD
[ 19:06:26 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 19:06:26 ] [ Phoenix ] Setting Baud to custom 76800
[ 19:06:28 ] [ Loader ] Card 0900 on port /dev/ttyS0 failed
[ 19:06:28 ] [ Loader ] Reinit card with caid 0900
[ 19:06:28 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 19:06:28 ] [ Phoenix ] Opening device /dev/ttyS0
[ 19:06:28 ] [ Phoenix ] Setting Parity to: ODD
[ 19:06:28 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 19:06:28 ] [ Phoenix ] Setting Baud to standard 9600
[ 19:06:28 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 19:06:29 ] [ ATR ] T=0 1etu=13.02us Guardtime:15etu WWT:76800etu
[ 19:06:29 ] [ ATR ] Historical bytes: T [B0] [01] i [FF] J P p [00] [00] K W [01] [00] [00]
[ 19:06:29 ] [ Loader ] Init NDS card
[ 19:06:29 ] [ Phoenix ] Setting Parity to: ODD
[ 19:06:29 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 19:06:29 ] [ Phoenix ] Setting Baud to custom 76800
[ 19:06:31 ] [ Loader ] Card 0900 on port /dev/ttyS0 failed
newcs stop
[SCRIPT] stop: NewCS Server
NEWCS Exitted...

hier nochma die config ^^ :

<?xml version="1.0"?>
<!--

For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around

)

The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.

** This is the example file for Phoenix Interface.

-->

<newCSconfig>
<readers name="Phoenix">
<device>
<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>357</mhz>
<node>/dev/ttyS0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>


<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>

</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>

<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>

<name>newcs</name>

<password>newcs</password>

<accesslevel>admin</accesslevel>
</user>
</httpd>

<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>

<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>

<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>localhost</hostname>
<port>5932</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
</newcamdserver>

</newCSconfig>

@nd1 · 17. November 2008

AW: card detect fail



das ist da aber noch net abgeändert :3:

Hm er erkennt die Karte nicht richtig, normalerweise müsste er als ID 09C4 anzeigen, ich geb dir mal meine Config, musst halt den <node> noch anpassen, da ich NewCS auf nem Windows Rechner laufen hab

Code:

<?xml version="1.0"?>
<newCSconfig>
<readers name="Phoenix">
<device>
<name>Phoenix Interface COM1</name>
<type>phoenix</type>
<mhz>357</mhz>
<node>COM1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>00000000</boxkey>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>10000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>admin</name>
<password>password</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<mode>simple</mode>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>newcs</name>
<password>password</password>
<hostname>localhost</hostname>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
</newcamdserver>
</newCSconfig>

darki86 · 17. November 2008

AW: card detect fail

Ops ^^ hatte es zwar abgeändert , hab aber noch die komentarzeichen drin...
hab es nun richtig abgeändert, was aber nichts an meiner lage ändert :-$
joa irgendwie bekomm ich da keine richtige verbindung hin ... hab es nun nochmal
mit dem newcs 1.61 probier... was aber auch nicht viel gebracht hat...
ich glaub so langsam bin ich durch ? ^^ vllt. liegt es ja an der hardware...
währ es möglich das das ganze mit nem mastercrd besser läuft?

Code:

serv:~# newcs start
[SCRIPT] start: NewCS Server
This is NewCS 1.61 - the New CardServer by the Butter-team..
Compiled on Aug 17 2008 at 21:59:26
Reading Config file from /etc/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 20:45:04 ] [ Box detect ] Box type 1 (General Boxtype - PC compatible)
[ 20:45:04 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to NO
[ 20:45:04 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 20:45:04 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 20:45:04 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 20:45:04 ] [ Config ] /dev/ttyS0 ECM priority: round
[ 20:45:04 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 20:45:04 ] [ EMM Cache ] Initialising dynamic Cache
[ 20:45:04 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2126
[ 20:45:04 ] [ Loader ] Starting Telnet on port 1001
[ 20:45:04 ] [ Loader ] Started HTTP-server on port: 8080
[ 20:45:04 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 20:45:04 ] [ Phoenix ] Opening device /dev/ttyS0
[ 20:45:04 ] [ Phoenix ] Setting Parity to: ODD
[ 20:45:04 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 20:45:04 ] [ Phoenix ] Setting Baud to standard 9600
[ 20:45:05 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
serv:~# [ 20:45:07 ] [ ATR ] T=0  1etu=13.02us  Guardtime:15etu  WWT:76800etu
[ 20:45:07 ] [ ATR ] Historical bytes: T [B0] [01] i [FF] J P p [00] [00] K W [01] [00] [10]
[ 20:45:07 ] [ Loader ] Init NDS card
[ 20:45:07 ] [ Phoenix ] Setting Parity to: ODD
[ 20:45:07 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 20:45:07 ] [ Phoenix ] Setting Baud to custom 76800
[ 20:45:08 ] [ Loader ] Card 0900 on port /dev/ttyS0 failed
[ 20:45:08 ] [ Loader ] Starting Newcamd Server on port 15000
[ 20:45:08 ] [ Newcamd ] Newcamd thread Server started on port 15000
[ 20:45:08 ] [ NewCS ] Ready to GO! :)
[ 20:45:08 ] [ Loader ] Reinit card with caid 0900
[ 20:45:08 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 20:45:08 ] [ Phoenix ] Opening device /dev/ttyS0
[ 20:45:08 ] [ Phoenix ] Setting Parity to: ODD
[ 20:45:08 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 20:45:08 ] [ Phoenix ] Setting Baud to standard 9600
[ 20:45:08 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 20:45:10 ] [ ATR ] T=0  1etu=13.02us  Guardtime:15etu  WWT:76800etu
[ 20:45:10 ] [ ATR ] Historical bytes: T [B0] [01] i [FF] J P p [00] [00] K W [01] [00] [10]
[ 20:45:10 ] [ Loader ] Init NDS card
[ 20:45:10 ] [ Phoenix ] Setting Parity to: ODD
[ 20:45:10 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 20:45:10 ] [ Phoenix ] Setting Baud to custom 76800
[ 20:45:11 ] [ Loader ] Card 0900 on port /dev/ttyS0 failed
[ 20:45:11 ] [ Loader ] Reinit card with caid 0900
[ 20:45:11 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 20:45:11 ] [ Phoenix ] Opening device /dev/ttyS0
[ 20:45:11 ] [ Phoenix ] Setting Parity to: ODD
[ 20:45:11 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 20:45:11 ] [ Phoenix ] Setting Baud to standard 9600
[ 20:45:11 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 20:45:13 ] [ ATR ] T=0  1etu=13.02us  Guardtime:15etu  WWT:76800etu
[ 20:45:13 ] [ ATR ] Historical bytes: T [B0] [01] i [FF] J P p [00] [00] K W [01] [00] [10]
[ 20:45:13 ] [ Loader ] Init NDS card
[ 20:45:13 ] [ Phoenix ] Setting Parity to: ODD
[ 20:45:13 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 20:45:13 ] [ Phoenix ] Setting Baud to custom 76800
[ 20:45:14 ] [ Loader ] Card 0900 on port /dev/ttyS0 failed
[ 20:45:14 ] [ Loader ] Reinit card with caid 0900
[ 20:45:14 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 20:45:14 ] [ Phoenix ] Opening device /dev/ttyS0
[ 20:45:14 ] [ Phoenix ] Setting Parity to: ODD
[ 20:45:14 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 20:45:14 ] [ Phoenix ] Setting Baud to standard 9600
[ 20:45:14 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 20:45:16 ] [ ATR ] T=0  1etu=13.02us  Guardtime:15etu  WWT:76800etu
[ 20:45:16 ] [ ATR ] Historical bytes: T [B0] [01] i [FF] J P p [00] [00] K W [01] [00] [10]
[ 20:45:16 ] [ Loader ] Init NDS card
[ 20:45:16 ] [ Phoenix ] Setting Parity to: ODD
[ 20:45:16 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 20:45:16 ] [ Phoenix ] Setting Baud to custom 76800
[ 20:45:17 ] [ Loader ] Card 0900 on port /dev/ttyS0 failed
[ 20:45:17 ] [ Loader ] Reinit card with caid 0900
[ 20:45:17 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 20:45:17 ] [ Phoenix ] Opening device /dev/ttyS0
[ 20:45:17 ] [ Phoenix ] Setting Parity to: ODD
[ 20:45:17 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 20:45:17 ] [ Phoenix ] Setting Baud to standard 9600
[ 20:45:17 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 20:45:19 ] [ ATR ] T=0  1etu=13.02us  Guardtime:15etu  WWT:76800etu
[ 20:45:19 ] [ ATR ] Historical bytes: T [B0] [01] i [FF] J P p [00] [00] K W [01] [00] [10]
[ 20:45:19 ] [ Loader ] Init NDS card
[ 20:45:19 ] [ Phoenix ] Setting Parity to: ODD
[ 20:45:19 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 20:45:19 ] [ Phoenix ] Setting Baud to custom 76800
[ 20:45:20 ] [ Loader ] Card 0900 on port /dev/ttyS0 failed
[ 20:45:20 ] [ Loader ] Reinit card with caid 0900
[ 20:45:20 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 20:45:20 ] [ Phoenix ] Opening device /dev/ttyS0
[ 20:45:20 ] [ Phoenix ] Setting Parity to: ODD
[ 20:45:20 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 20:45:20 ] [ Phoenix ] Setting Baud to standard 9600
[ 20:45:20 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 20:45:22 ] [ ATR ] T=0  1etu=13.02us  Guardtime:15etu  WWT:76800etu
[ 20:45:22 ] [ ATR ] Historical bytes: T [B0] [01] i [FF] J P p [00] [00] K W [01] [00] [10]
[ 20:45:22 ] [ Loader ] Init NDS card
[ 20:45:22 ] [ Phoenix ] Setting Parity to: ODD
[ 20:45:22 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 20:45:22 ] [ Phoenix ] Setting Baud to custom 76800
[ 20:45:23 ] [ Loader ] Card 0900 on port /dev/ttyS0 failed

@nd1 · 17. November 2008

AW: card detect fail

Bei mir klappt das aber auch mit der Smartmouse, hast du es mal an nem Windows Rechner probiert, oder überhaupt an nem anderen Rechner, das sieht irgendwie aus wie wenn dein Debian Server mit dem COM Port Probleme hat.

Suche

Suche

card detect fail

darki86

Ist gelegentlich hier

darki86

Ist gelegentlich hier

Nasher

darki86

Ist gelegentlich hier

@nd1

darki86

Ist gelegentlich hier

@nd1

darki86

Ist gelegentlich hier

@nd1

darki86

Ist gelegentlich hier

@nd1

darki86

Ist gelegentlich hier

@nd1

darki86

Ist gelegentlich hier

@nd1

Ähnliche Themen

Spenden Unterstützung