bekomme ich im Oscam-Log folgende Fehlerinfos:

[Pilot]

AW: bekomme ich im Oscam-Log folgende Fehlerinfos:

steckt schon drin

Nach dem Umstecken: neu booten

 

[dia]

AW: bekomme ich im Oscam-Log folgende Fehlerinfos:

es richt sich auch nach dem was du im server stehen hast

ob da steht sci0
oder sci1

 

[DSF2]

AW: bekomme ich im Oscam-Log folgende Fehlerinfos:

sci1 in der Config und Karte steckt nun oben drin:

Spoiler

2015/05/11 10:23:43 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: !reader_card_inserted
2015/05/11 10:23:43 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: reader->card_status = 4, ret = 0
xxx
2015/05/11 10:23:44 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: !reader_card_inserted
2015/05/11 10:23:44 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: reader->card_status = 4, ret = 0
2015/05/11 10:23:45 0 (cccam) share-updater mode=initfast t=1s i=7
2015/05/11 10:23:45 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: !reader_card_inserted
2015/05/11 10:23:45 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: reader->card_status = 4, ret = 0
xxx
2015/05/11 10:23:46 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: !reader_card_inserted
2015/05/11 10:23:46 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: reader->card_status = 4, ret = 0
2015/05/11 10:23:47 0 (cccam) share-updater mode=initfast t=1s i=5
2015/05/11 10:23:47 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: !reader_card_inserted
2015/05/11 10:23:47 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: reader->card_status = 4, ret = 0
2015/05/11 10:23:48 0 (cccam) share-updater mode=initfast t=1s i=4
2015/05/11 10:23:48 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: !reader_card_inserted
2015/05/11 10:23:48 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: reader->card_status = 4, ret = 0
2015/05/11 10:23:49 0 (cccam) share-updater mode=initfast t=1s i=3
2015/05/11 10:23:49 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: !reader_card_inserted
2015/05/11 10:23:49 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: reader->card_status = 4, ret = 0
2015/05/11 10:23:50 0 (cccam) share-updater mode=initfast t=1s i=2
2015/05/11 10:23:50 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: !reader_card_inserted
2015/05/11 10:23:50 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: reader->card_status = 4, ret = 0
2015/05/11 10:23:51 0 (cccam) share-updater mode=initfast t=1s i=1
2015/05/11 10:23:51 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: !reader_card_inserted
2015/05/11 10:23:51 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: reader->card_status = 4, ret = 0
2015/05/11 10:23:52 0 (cccam) share-updater mode=interval t=240s
2015/05/11 10:23:52 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: !reader_card_inserted
2015/05/11 10:23:52 76E004F8 r (reader) v14 [internal] cardreader_do_checkhealth: reader->card_status = 4, ret = 0

 

[Pilot]

AW: bekomme ich im Oscam-Log folgende Fehlerinfos:

jetzt neu booten.....

 

[dia]

AW: bekomme ich im Oscam-Log folgende Fehlerinfos:

mach mal eine andere oscam drauf und lasse die karte mal raus

 

[DSF2]

AW: bekomme ich im Oscam-Log folgende Fehlerinfos:

Hab die r10641 drauf. Welche würdest du mir empfehlen?

- - - - - - - - - -

jetzt neu booten.....

Immer noch das gleiche:

Spoiler

2015/05/11 10:30:32 7015B0 r (reader) v14 [internal] cardreader_do_checkhealth: !reader_card_inserted
2015/05/11 10:30:32 7015B0 r (reader) v14 [internal] cardreader_do_checkhealth: reader->card_status = 4, ret = 0
2015/05/11 10:30:33 7015B0 r (reader) v14 [internal] cardreader_do_checkhealth: !reader_card_inserted
2015/05/11 10:30:33 7015B0 r (reader) v14 [internal] cardreader_do_checkhealth: reader->card_status = 4, ret = 0
2015/05/11 10:30:34 7015B0 r (reader) v14 [internal] cardreader_do_checkhealth: !reader_card_inserted
2015/05/11 10:30:34 7015B0 r (reader) v14 [internal] cardreader_do_checkhealth: reader->card_status = 4, ret = 0

 

[dia]

AW: bekomme ich im Oscam-Log folgende Fehlerinfos:

nimm mal bis 10400

oder nimm mal deine alte die du vorher drauf hattest
aber lass die karte drausen

 

[DSF2]

AW: bekomme ich im Oscam-Log folgende Fehlerinfos:

Bin jetzt mal auf r10660 und siehe da:

Spoiler

2015/05/11 10:42:21 60FAB0 r (reader) v14 [internal] card detected
2015/05/11 10:42:22 60FAB0 r (reader) v14 [internal] ATR: xxx
2015/05/11 10:42:22 60FAB0 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/05/11 10:42:22 60FAB0 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/05/11 10:42:22 60FAB0 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75203
2015/05/11 10:42:23 60FAB0 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/11 10:42:26 60FAB0 r (reader) v14 [internal] card system not supported
2015/05/11 10:42:26 60FAB0 r (reader) v14 [internal] Normal mode failed, reverting to Deprecated Mode
2015/05/11 10:42:28 60FAB0 r (reader) v14 [internal] ERROR: no characters found in ATR!
2015/05/11 10:42:28 60FAB0 r (reader) v14 [internal] Deactivating card
2015/05/11 10:42:28 60FAB0 r (reader) v14 [internal] Read ATR fail, attempt 1/7 fs = 9
2015/05/11 10:42:29 60FAB0 r (reader) v14 [internal] ATR: xxx
2015/05/11 10:42:29 60FAB0 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/05/11 10:42:29 60FAB0 r (reader) v14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/05/11 10:42:29 60FAB0 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75212
2015/05/11 10:42:30 60FAB0 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/11 10:42:33 60FAB0 r (reader) v14 [internal] card system not supported
2015/05/11 10:42:33 60FAB0 r (reader) v14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/05/11 10:42:33 60FAB0 r (reader) v14 [internal] card initializing error

 

[dia]

AW: bekomme ich im Oscam-Log folgende Fehlerinfos:

setzte das inst11 =15 auf 13

 

[DSF2]

AW: bekomme ich im Oscam-Log folgende Fehlerinfos:

DANKE

Spoiler

2015/05/11 10:48:07 0 s (reader) v14 [internal] creating thread for device /dev/sci0
xxx
2015/05/11 10:48:07 76A004F8 r (reader) v14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/05/11 10:48:07 76A004F8 r (reader) v14 [internal] Reader sci internal, detected box type: dm800se
2015/05/11 10:48:07 72D4C0 h (webif) webif: decompressed 160180 bytes back into 384088 bytes
2015/05/11 10:48:07 72D4C0 h (webif) HTTP Server running. ip=0.0.0.0 port=xxx
2015/05/11 10:48:08 76A004F8 r (reader) v14 [internal] card detected
2015/05/11 10:48:09 76A004F8 r (reader) v14 [internal] ATR: xxx
2015/05/11 10:48:09 76A004F8 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/05/11 10:48:09 76A004F8 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/05/11 10:48:09 76A004F8 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75199
2015/05/11 10:48:10 76A004F8 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/11 10:48:11 76A004F8 r (reader) v14 [internal] Card type: P1TV
2015/05/11 10:48:11 76A004F8 r (reader) v14 [internal] Rom version: 20AA
2015/05/11 10:48:11 76A004F8 r (reader) v14 [internal] Credit available on card: 0 euro
2015/05/11 10:48:11 76A004F8 r (reader) v14 [internal] Extended 4C detected
2015/05/11 10:48:11 76A004F8 r (reader) v14 [internal] FuseByte: 00
2015/05/11 10:48:11 76A004F8 r (reader) v14 [internal] Region Code:
2015/05/11 10:48:11 76A004F8 r (reader) v14 [internal] Country Code: DEU
2015/05/11 10:48:11 76A004F8 r (reader) v14 [internal] Pincode read: xxx
2015/05/11 10:48:11 76A004F8 r (reader) v14 [internal] PCB settings: FF FF FF FF
2015/05/11 10:48:11 76A004F8 r (reader) v14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/05/11 10:48:11 76A004F8 r (reader) v14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/05/11 10:48:11 76A004F8 r (reader) v14 [internal] ready for requests
2015/05/11 10:48:11 76A004F8 r (reader) v14 [internal] found card system videoguard2
2015/05/11 10:48:11 76A004F8 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/05/11 10:48:11 76A004F8 r (reader) v14 [videoguard2] card detected
2015/05/11 10:48:11 76A004F8 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/05/11 10:48:11 76A004F8 r (reader) v14 [videoguard2] ------------------------------------------------------------------
2015/05/11 10:48:11 76A004F8 r (reader) v14 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/05/11 10:48:11 76A004F8 r (reader) v14 [videoguard2] +---------+----------+---------------------+---------------------+
2015/05/11 10:48:11 76A004F8 r (reader) v14 [videoguard2] |------- This card is not active, so no package available! ------|
2015/05/11 10:48:12 76A004F8 r (reader) v14 [videoguard2] ------------------------------------------------------from-ins70--
xxx
2015/05/11 10:48:40 76A004F8 r (reader) v14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1

Karte wird endlich erkannt (lag scheinbar an der Oscam-Version). Jetzt "nur" noch aktivieren

 

[dia]

AW: bekomme ich im Oscam-Log folgende Fehlerinfos:

jetzt kannste loggen

 

[DSF2]

AW: bekomme ich im Oscam-Log folgende Fehlerinfos:

Freischaltsignal von Sky schicken lassen, auf Sky Sport News HD schalten und dann nach drei Stunden mal schauen, was so alles kam, oder?

 

[dia]

AW: bekomme ich im Oscam-Log folgende Fehlerinfos:

stelle auf sky krimi
und warte 2 std sollte kein emm kommen dann freischaltsignal schicken lassen
sollte bei dir nur 827025 und 827035 kommen ist nur ein beispiel
freischaltsignal anfordern

 

[DSF2]

AW: bekomme ich im Oscam-Log folgende Fehlerinfos:

OK. Danke. Meine letzte Smartcardfreischaltung war laut sky.de Mitte Januar 2014. Interessant.

Mit den beiden Einstellungen:
oscam.server:

Spoiler

blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
saveemm-unknown = 1

und
oscam.conf:

Spoiler

emmlogdir = /etc/tuxbox/

sollten die wichtigen EMM's ja gelogt werden, oder?

 

[dia]

AW: bekomme ich im Oscam-Log folgende Fehlerinfos:

ja alles richtig