Isn't English a better chance to have contributions from all over the world, including Russia and Poland, where it all started?
On page 29, says v.0.6
0ABCCCDD - Maps6:
• A Brand 2 = Audi, 3 = Bentley, 6 = Porsche, 7 = Sitz, 8 = Skoda, 9 = VW, C = MAN
• B MIB version 1 = MIB1 HIGH (Harman), 3 = MIB2 HIGH (Harman)
but original source (Russian link
) says
D - device type. 1 = MIB1 HIGH (Harman), 3 = MIB2 HIGH (Harman), 4 = MIB STD2 (TechniSat / Preh / Delphi)
(4 is missing in the document, since we want it to be universal, it should be added)
Also on page 29, document v.0.6 says
DD valid until year (DD is Hex value) but the original link says something else:
UU -
... If the "installed FEC" has these numbers less than those of the "supported FEC", the cards will not work.
For example: in order for Skoda MIB STD2 (Amundsen) to work with maps for Europe, in the "Installed codes" list, there must be a FEC code
08400003 , where the last digits 03 indicate what is the maximum ordinal number of maps update , you can use.
Maps for Skoda Amundsen, Seat Navi System, VW Discover Media and MAN are the same and are located on the SD card in the maps folder. No text files are needed in the root of the SD card. Unlike previous generations of radio tape recorders with navigation (for example, RNS), on the MIB STD2, the branded SD card is not blocked from viewing and copying content on a computer.
The version of the maps can be viewed in the file
maps / 00 / nds / dbinfo.txt
format, the provider of map information before version 915, 2018 is Here, and since version 1020,
TomTom. To activate TMC in Europe, it is necessary in the adaptation of "Set_PayTMC" block 5F, to register the value 32783, and restart the radio tape recorder by long pressing the power button.
When inserting an SD card into the slot of the radio, the following checks are carried out:
1. The
SD card is checked. "Untreated" Amundsen works only with original Skoda SD cards. Accordingly, Discover Media needs a Volkswagen SD card, and Seat Navi System needs a Seat SD card.
2. FEC cards are read from the SD card from the file
\ maps \ EEC \ EEC_WLD \ OVERALL.NDS , and are displayed in the service menu of the radio, in the "Supported FEC" list. These codes, 074xxxxUU, 084xxxxUU, 094xxxxUU, 0c4xxxxUU, are compared with those from the Installed FEC menu.
If the "Supported FECs" have the last two digits (UU) greater than the last two digits of the same FEC from the "Installed FECs" list,
and the use of maps is blocked. To unlock, just replace the
\ maps \ EEC \ EEC_WLD \ OVERALL.NDS file with a similar one from the old version of maps.