Problema aiuto per easymouse 2 con tvsat

[mercurio07100]

ciao a tutti
ho bisogno di una mano per configurare un easymouse2 per leggere la card tvsat

conf.

Spoiler

[global]
logfile = /var/log/ipc/OScam.log
fallbacktimeout = 2000
cachedelay = 120
nice = -1
maxlogsize = 512
preferlocalcards = 1
dropdups = 1
failbantime = 5

[cccam]
port = *****
version = 2.3.0
reshare = 1
stealth = 1

[webif]
httpport = ******
httpuser = *******
httppwd = *******
httptpl = /var/etc/picons
httphelplang = it
httphideidleclients = 1
httpshowpicons = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

server

Spoiler

[reader]
label = media7
protocol = smartreader
device = 001:004
caid = 1805
rsakey = A92DA72F............164B5
detect = cd
nagra_read = 2
mhz = 369
cardmhz = 368
ident = 1805:000000,008D11
group = 1
emmcache = 1,2,2
blockemm-unknown = 1
blockemm-g = 1


[reader]
label = tvsat
protocol = mouse
device = 003:002
caid = 183D
rsakey = A92.............8164B5
detect = cd
nagra_read = 2
mhz = 357
cardmhz = 357
ident = 183D:000000,005411
group = 3
emmcache = 1,2,2
blockemm-unknown = 1
blockemm-g = 1

user

Spoiler

tutti i miei user sia in lan che in wan

il tutto su un s400 con debian

il problema e che con l'easymouse non riesco a leggere la card tvsat, e inoltre quando attivo il reder di tvsat(easymouse) tutti i miei user vanno offline, se lo disattivo immediatamente ritornano online


questo e l'errore che mi da il log

Spoiler

2012/12/21 00:25:56 8E105A0 r tvsat [mouse] ERROR: Opening device 003:002 (errno=2 No such file or directory)
2012/12/21 00:25:56 8E105A0 r tvsat [mouse] Cannot open device: 003:002
2012/12/21 00:26:56 8E105A0 r tvsat [mouse] ERROR: Opening device 003:002 (errno=2 No such file or directory)
2012/12/21 00:26:56 8E105A0 r tvsat [mouse] Cannot open device: 003:002
2012/12/21 00:27:56 8E105A0 r tvsat [mouse] ERROR: Opening device 003:002 (errno=2 No such file or directory)
2012/12/21 00:27:56 8E105A0 r tvsat [mouse] Cannot open device: 003:002
2012/12/21 00:28:56 8E105A0 r tvsat [mouse] ERROR: Opening device 003:002 (errno=2 No such file or directory)
2012/12/21 00:28:56 8E105A0 r tvsat [mouse] Cannot open device: 003:002

Switch Debug from 0

stato della card UNKNOWN


settaggio easymouse2

Spoiler

5v
phoenix
3,57 mhz

carta inserita con chip verso il basso, giusto?

il reder media7 (smargo) invece funziona perfettamente


grazie

 

[elcoro]

AW: aiuto per easymouse 2 con tvsat

ai inserito il device sbaglioto per easymouse dai il comando lsusb e vedi che device ti fa vedere

 

[mercurio07100]

lsusb

Spoiler

root@S400 ~ > lsusb
Bus 003 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT 232 USB-Serial (UART) IC
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT 232 USB-Serial (UART) IC
Bus 001 Device 002: ID 050d:0304 Belkin Components FSU304 USB 2.0 - 4 Ports Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

a me i device sembrano giusti

 

[elcoro]

AW: aiuto per easymouse 2 con tvsat

cosa stai usando dreambox ho qualche altro linux system?

 

[mercurio07100]

il tutto su un s400 con debian

 

[elcoro]

AW: aiuto per easymouse 2 con tvsat

ok allora fai cosi dai questo comando

udevadm info -n /dev/ttyUSB0 -a



ti risponde cosi

Spoiler

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

looking at device '/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/ttyUSB0/tty/ttyUSB0':
KERNEL=="ttyUSB0"
SUBSYSTEM=="tty"
DRIVER==""

looking at parent device '/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/ttyUSB0':
KERNELS=="ttyUSB0"
SUBSYSTEMS=="usb-serial"
DRIVERS=="ftdi_sio"
ATTRS{latency_timer}=="1"
ATTRS{port_number}=="0"

looking at parent device '/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0':
KERNELS=="4-1:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="ftdi_sio"
ATTRS{bInterfaceNumber}=="00"
ATTRS{bAlternateSetting}==" 0"
ATTRS{bNumEndpoints}=="02"
ATTRS{bInterfaceClass}=="ff"
ATTRS{bInterfaceSubClass}=="ff"
ATTRS{bInterfaceProtocol}=="ff"
ATTRS{modalias}=="usb:v0403p6001d0600dc00dsc00dp00icFFiscFFipFF"
ATTRS{supports_autosuspend}=="0"
ATTRS{interface}=="FT232R USB UART"

looking at parent device '/devices/pci0000:00/0000:00:10.2/usb4/4-1':
KERNELS=="4-1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="a0"
ATTRS{bMaxPower}==" 90mA"
ATTRS{urbnum}=="15"
ATTRS{idVendor}=="0403"
ATTRS{idProduct}=="6001"
ATTRS{bcdDevice}=="0600"
ATTRS{bDeviceClass}=="00"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="8"
ATTRS{speed}=="12"
ATTRS{busnum}=="4"
ATTRS{devnum}=="3"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="0"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="FTDI"
ATTRS{product}=="FT232R USB UART"
ATTRS{serial}=="AH01B92A"

looking at parent device '/devices/pci0000:00/0000:00:10.2/usb4':
KERNELS=="usb4"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}==" 0mA"
ATTRS{urbnum}=="56"
ATTRS{idVendor}=="1d6b"
ATTRS{idProduct}=="0001"
ATTRS{bcdDevice}=="0206"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="12"
ATTRS{busnum}=="4"
ATTRS{devnum}=="1"
ATTRS{version}==" 1.10"
ATTRS{maxchild}=="2"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="Linux 2.6.32-5-686 uhci_hcd"
ATTRS{product}=="UHCI Host Controller"
ATTRS{serial}=="0000:00:10.2"
ATTRS{authorized_default}=="1"

looking at parent device '/devices/pci0000:00/0000:00:10.2':
KERNELS=="0000:00:10.2"
SUBSYSTEMS=="pci"
DRIVERS=="uhci_hcd"
ATTRS{vendor}=="0x1106"
ATTRS{device}=="0x3038"
ATTRS{subsystem_vendor}=="0x1106"
ATTRS{subsystem_device}=="0x3038"
ATTRS{class}=="0x0c0300"
ATTRS{irq}=="10"
ATTRS{local_cpus}=="ffffffff"
ATTRS{local_cpulist}=="0-31"
ATTRS{modalias}=="pci:v00001106d00003038sv00001106sd00003038bc0Csc03i00"
ATTRS{enable}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""

looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""

il mio easymouse serial e quello in rosso

 

[mercurio07100]

Spoiler

root@S400 ~ > udevadm info -n /dev/ttyUSB0 -a

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

looking at device '/devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/ttyUSB0/tty/ttyUSB0':
KERNEL=="ttyUSB0"
SUBSYSTEM=="tty"
DRIVER==""

looking at parent device '/devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/ttyUSB0':
KERNELS=="ttyUSB0"
SUBSYSTEMS=="usb-serial"
DRIVERS=="ftdi_sio"
ATTRS{latency_timer}=="1"
ATTRS{port_number}=="0"

looking at parent device '/devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0':
KERNELS=="3-2:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="ftdi_sio"
ATTRS{bInterfaceNumber}=="00"
ATTRS{bAlternateSetting}==" 0"
ATTRS{bNumEndpoints}=="02"
ATTRS{bInterfaceClass}=="ff"
ATTRS{bInterfaceSubClass}=="ff"
ATTRS{bInterfaceProtocol}=="ff"
ATTRS{modalias}=="usb:v0403p6001d0600dc00dsc00dp00icFFiscFFipFF"
ATTRS{supports_autosuspend}=="0"
ATTRS{interface}=="FT232R USB UART"

looking at parent device '/devices/pci0000:00/0000:00:03.1/usb3/3-2':
KERNELS=="3-2"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="a0"
ATTRS{bMaxPower}==" 90mA"
ATTRS{urbnum}=="15"
ATTRS{idVendor}=="0403"
ATTRS{idProduct}=="6001"
ATTRS{bcdDevice}=="0600"
ATTRS{bDeviceClass}=="00"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="8"
ATTRS{speed}=="12"
ATTRS{busnum}=="3"
ATTRS{devnum}=="2"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="0"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="FTDI"
ATTRS{product}=="FT232R USB UART"
ATTRS{serial}=="A901LODH"

looking at parent device '/devices/pci0000:00/0000:00:03.1/usb3':
KERNELS=="usb3"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}==" 0mA"
ATTRS{urbnum}=="35"
ATTRS{idVendor}=="1d6b"
ATTRS{idProduct}=="0001"
ATTRS{bcdDevice}=="0206"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="12"
ATTRS{busnum}=="3"
ATTRS{devnum}=="1"
ATTRS{version}==" 1.10"
ATTRS{maxchild}=="3"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="Linux 2.6.32-5-686 ohci_hcd"
ATTRS{product}=="OHCI Host Controller"
ATTRS{serial}=="0000:00:03.1"
ATTRS{authorized_default}=="1"

looking at parent device '/devices/pci0000:00/0000:00:03.1':
KERNELS=="0000:00:03.1"
SUBSYSTEMS=="pci"
DRIVERS=="ohci_hcd"
ATTRS{vendor}=="0x1039"
ATTRS{device}=="0x7001"
ATTRS{subsystem_vendor}=="0x1039"
ATTRS{subsystem_device}=="0x7001"
ATTRS{class}=="0x0c0310"
ATTRS{irq}=="3"
ATTRS{local_cpus}=="ffffffff"
ATTRS{local_cpulist}=="0-31"
ATTRS{modalias}=="pci:v00001039d00007001sv00001039sd00007001bc0Csc03i10"
ATTRS{enable}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""

looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""

quindi il mio sarà quello che ho segnato in rosso

devo mettere il seriale come device così?

device = A901LODH

 

[elcoro]

AW: aiuto per easymouse 2 con tvsat

device = Serial: XXXXXXXX

ricordati che tivusat mhz vanno a 357 altrimenti nn ti legge la card

 

[mercurio07100]

niente da fare

2012/12/21 14:34:48 85B7760 r tvsat [mouse] ERROR: Opening device Serial: A901LODH (errno=2 No such file or directory)
2012/12/21 14:34:48 85B7760 r tvsat [mouse] Cannot open device: Serial: A901LODH

oltretutto mi manda offline tutti i miei user
appena disattivo il reder di tvsat ritornano immediatamnete online

 

[mercurio07100]

potrebbe essere l'easymouse difettoso?


con l'easymouse è meglio usare un hub alimentato oppure non è necessario?

 

[seppel11]

AW: aiuto per easymouse 2 con tvsat

ai messo smartreader come lettore prova con phoenix
quanto so io smartreader serve per smargo

cosi va da me

Spoiler

# TivuSat
[reader]
label = tivusat
protocol = phoenix
device = /dev/TIVUSAT # metti il tuo nome scelto in udev
caid = 183D
rsakey = A9......B5 # metti il rsakey
detect = cd
mhz = 368
cardmhz = 368
ident = 183D:000000,005411
group = 1 #metti il tuo group
emmcache = 1,3,2
auprovid = 005411
blockemm-g = 1
blockemm-unknown = 1

easymouse

5V
Phoenix
Y1

 

[mercurio07100]

OK,


stasera provo e ti faccio sapere

 

[mercurio07100]

però leggendo il wiki di oscam non è indicato come protocollo il phoenix


protocol

Spoiler

= mouse (Lokaler Cardreader)
= internal (Alle Cardreader mit einem "Device=/dev/sciX")
= camd35|cs357x (Cascading - camd 3.5-kompatibler Remote-Server)
= mp35
= smartreader
= serial
= cs378x
= gbox
= newcamd|newcamd525
= newcamd524
= cccam
= radegast
= pcsc
= constcw

 

[seppel11]

AW: aiuto per easymouse 2 con tvsat

si mi sa che va ance con mouse ma smartreader e per il smargo

io o tutti i easymouse su protocol phoenix

 

[mercurio07100]

niente da fare con phoenix non viene neanche riconosciuto

può essere un problema di versione di oscam ?

quale usate voi?

io ho messo l'ultima