SoftCSA OpenATV

ian1095 · Donnerstag um 20:03

Ok I've just tested Matrix for you and as you say this skin is completely unaffected by this issue. The resolution always displays in the infobar upon every channel change.

I really dont know why this is ?

WXbet · Donnerstag um 20:05

ian1095 schrieb:
Its a bug that was introduced with the updates.

Bug is a strong word, my friend. The recently introduced change concerns the timing of the decoder startup when switching to a softCSA channel. The decoder on softCSA channels now only starts after the first CW signal arrives, not immediately as before. This prevents an encrypted stream from being sent to the decoder immediately, which can lead to artifacts on some receivers when the subsequent CWs and the decrypted content arrive.

ian1095 · Donnerstag um 20:14

Ah Ok. Yes I remember that update and yes that was indeed about the same time as this issue appeared for the first time.

Ps the Softcsa icon being displayed correctly is now fixed as you stated.

Token · Donnerstag um 22:06

@ian1095

keine ahnung, was du bei deinem skin verkehrt machst,
aber die im oatv angebotenen opli-skin's funktionieren einwandfrei!
auflösung und picon ... der rest ist dann kosmetik!
===
I have no idea what you're doing wrong with your skin,
but the Opli skins offered by OATV work perfectly!
resolution and picon... the rest is just cosmetic!

Du musst Regestriert sein, um das angehängte Bild zusehen.

ian1095 · Donnerstag um 22:34

The simple answer is nothing.

Before the update to only start the decoder after the first cw arrives everything worked perfectly.
After that update the resolution being displayed is broken.

My skin is not at fault, softcsa is on certain skins.

lisaasil · Donnerstag um 22:53

Everything works perfectly, thank you. There's just one thing missing: switching from a Sky channel to ZDF or RTL HD takes 5-10 seconds, and vice versa from ZDF to Sky takes 1-2 seconds.

What am I doing wrong?
THanks!!!

glaubichnicht · Donnerstag um 22:56

Gib den Leute Zeit ihre Glaskugel zu reinigen.

babsy98 · Donnerstag um 23:01

wie schon x mal gesagt Fehler immer mit e2 debug logs posten

Token · Donnerstag um 23:19

@ian1095

tja, da du der einzigste bist, der ein resolution-problem mit deinem gemoddeten skin hat,
wirste wohl selbst mal deine skin.xml auf fehlerhafte aufrufe prüfen müssen!
ich habe hier auf 3 stb's mit unterschiedlichen skins res+picon geprüft, da war alles okay!
insofern bleibe ich dabei: das softcsa verursacht nicht deinen fehler, sondern eher dein gemodderter skin!
===
Well, since you're the only one who has a resolution problem with your modded skin,
you'll probably have to check your skin.xml for incorrect calls yourself!
I checked res+picon on 3 STBs with different skins, and everything was fine!
So I stand by my opinion: the softcsa is not causing your error, but rather your modded skin!

lisaasil · Donnerstag um 23:32

Attached the log, but I'm not sure if this is what you need.

gassis · Freitag um 00:08

Wie muss ich jetzt englisch lernen ??

Token · Freitag um 00:23

nein, das kann man doch schon ... aber turkye und arabic!

lisaasil · Freitag um 00:28

In Turkey and Arabic we use AI.

WXbet · Freitag um 00:28

@lisaasil: The slow switching from Sky → ZDF has nothing to do with SoftCSA.
23:17:36.8850 [eDVBChannel] OURSTATE: tuner 0 failed, retune
The tuner needs a retry when switching to ZDF/RTL. This indicates a DiSEqC or signal problem.

Possible causes:

DiSEqC timing set too short
Problems with the LNB/switch
Weak signal on 19.2°E (ZDF/RTL transponder)

Compare signal strength/quality on both transponders
DiSEqC settings (try enabling "Repeat" or increase timing)
If using a DiSEqC switch: check cables and connections

Please open a new thread if need help to change your configuration!

Btw: In Germany we do the same, its so easy letting analyze your logfile with AI

@ian1095: For your interest, this is the converter used by OpenATV:

Sie müssen registriert sein, um Links zu sehen.

ian1095 · Freitag um 07:52

Token schrieb:
@ian1095

tja, da du der einzigste bist, der ein resolution-problem mit deinem gemoddeten skin hat,
wirste wohl selbst mal deine skin.xml auf fehlerhafte aufrufe prüfen müssen!
ich habe hier auf 3 stb's mit unterschiedlichen skins res+picon geprüft, da war alles okay!
insofern bleibe ich dabei: das softcsa verursacht nicht deinen fehler, sondern eher dein gemodderter skin!
===
Well, since you're the only one who has a resolution problem with your modded skin,
you'll probably have to check your skin.xml for incorrect calls yourself!
I checked res+picon on 3 STBs with different skins, and everything was fine!
So I stand by my opinion: the softcsa is not causing your error, but rather your modded skin!

theres a difference between being the only one and the only one posting. If you seach through this thread ( not easy ) then you will see several others have reported the issue as well, but now they just seem to be reading and waiting for a fix rather than commenting.

Suche

Suche

SoftCSA OpenATV

ian1095

Ist gelegentlich hier

WXbet

Spezialist

ian1095

Ist gelegentlich hier

Token

Power Elite User

Anhänge

ian1095

Ist gelegentlich hier

lisaasil

Newbie

glaubichnicht

Stamm User

babsy98

Ist gelegentlich hier

Token

Power Elite User

lisaasil

Newbie

Anhänge

gassis

Ist gelegentlich hier

Token

Power Elite User

lisaasil

Newbie

WXbet

Spezialist

ian1095

Ist gelegentlich hier

Ähnliche Themen

Spenden Unterstützung