UM02 auf Dream800 unter Oscam 1.10rc-svn Rev. 6089 - nach Neustart keine Reader

[STAN001]

Hi zusammen,

irgendwie hab ich mir wohl was eingefangen - aber keine Ahnung was.

Streng das Motto "never change a runnig system" ignorierend, habe ich (eigentlich nur eine Kleinigkeit geändert) und dann Oscam neu gestartet. Die Änderung betraf den Eintrag bei "appendchaninfo = 0", den ich auf "1" geändert hatte! Das, was dieser Eintrag machen sollte, hat er auch gemacht, aber meine Reader (Proxy) tauchten nicht mehr als Server auf!

Ich haäng jetzt schon eine ganze Weile damit rum, finde aber keine Antwort. Denke, dass da irgendwas faul ist. Nur zur Info: Mehrere Neustarts der Dreambox 800 (Original) und auch von Oscam brachte keinen Erfolg (bisher).

Meine Konfigurationen:

oscam.config

Spoiler

[global]
logfile = /tmp/oscam.log
nice = -1
maxlogsize = 256
saveinithistory = 1
lb_mode = 1
lb_save = 1000

[monitor]
hideclient_to = 15
appendchaninfo = 0

[cccam]
port = 12345
ignorereshare = 1
version = 2.2.1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = DVBApi

[webif]
httpport = 3015
httphelplang = de
httpuser = admin
httppwd = oscam
httprefresh = 10
httpallowed = 192.168.0.1-192.168.0.50

Oscam.server

Spoiler

[reader]
label = um02
protocol = internal
device = /dev/sci0
services = umbasic,umplus,umallstars,umallstarshd
caid = 1838
rsakey = B5...FF
boxkey = A7...7C
ecmwhitelist = 92
detect = cd
mhz = 500
cardmhz = 368
ident = 1838:000000
group = 1
emmcache = 1,1,2
lb_weight = 200


[reader]
label = user1
protocol = cccam
device = user1.dyndns.org,34567
user = Client1
password = Passwort1
group = 4
cccversion = 2.1.1
ccckeepalive = 1
cccreshare = 2


[reader]
label = User2
protocol = cccam
device = user2.dyndns.org,36840
user = client2
password = Passwort2
group = 5
cccversion = 2.1.1
ccckeepalive = 1

Oscam.user

Spoiler

[account]
user = DVBApi
pwd =
group = 1,4,5
au = 1
caid = 1722,1831,1835,1838
cccmaxhops = 4
cccreshare = 1

[account]
user = mclient1
pwd = mpass1
group = 1
caid = 1722,1831,1835,1838
cccmaxhops = 1

[account]
user = mclient2
pwd = mpass2
group = 1
caid = 1722,1831,1835,1838
cccreshare = 1

Hinweis: Die blau eingefärbten Passagen hab ich unwillwürlich verändert und diese Einträge sind in dem nachfolgenden Log nicht genau so wieder zu finden.

Nach Neustart von Oscam können sich die Externen zu mir verbinden und auch bei mir von der Karte (wie vorgesehen) die Daten holen, aber ich kann deren Karten nicht mehr nutzen...

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Apr 22 12:45:02 2012
-------------------------------------------------------------------------------
2012/04/22 12:45:02 2AAC6810 s >> OSCam << cardserver started, version 1.10rc-svn, build #6089 (mips-tuxbox-linux)
2012/04/22 12:45:02 2AAC6810 s version=1.10rc-svn, build #6089, system=mips-tuxbox-linux, nice=-1
2012/04/22 12:45:02 2AAC6810 s client max. idle=120 sec, debug level=0
2012/04/22 12:45:02 2AAC6810 s max. logsize=256 Kb, loghistorysize=4096 bytes
2012/04/22 12:45:02 2AAC6810 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/04/22 12:45:02 2AAC6810 s services reloaded: 0 services freed, 7 services loaded, rejected 0
2012/04/22 12:45:02 2AAC6810 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2012/04/22 12:45:02 2AAC6810 s signal handling initialized (type=sysv)
2012/04/22 12:45:02 2AAC6810 s 226 service-id's loaded in 11ms
2012/04/22 12:45:02 2AAC6810 s oscam.tiers loading failed
2012/04/22 12:45:02 2AAC6810 s 4 provid's loaded
2012/04/22 12:45:02 2AAC6810 s 0 lengths for caid guessing loaded
2012/04/22 12:45:02 2AAC6810 s monitor: disabled
2012/04/22 12:45:02 2AAC6810 s camd33: disabled
2012/04/22 12:45:02 2AAC6810 s camd35: disabled
2012/04/22 12:45:02 2AAC6810 s cs378x: disabled
2012/04/22 12:45:02 2AAC6810 s newcamd: disabled
2012/04/22 12:45:02 2AAC6810 s cccam: initialized (fd=7, port=12345, crypted)
2012/04/22 12:45:02 2AAC6810 s radegast: disabled
2012/04/22 12:45:02 2AAC6810 s http thread started
2012/04/22 12:45:02 2AAC6810 s creating thread for device /dev/sci0
2012/04/22 12:45:02 2AAC6810 s creating thread for device user1.dyndns.org
2012/04/22 12:45:02 2AAC6810 s creating thread for device user2.dyndns.org
2012/04/22 12:45:02 2AAC6810 s waiting for local card init
2012/04/22 12:45:02 2B3114B0 p proxy thread started (thread=2B3114B0, label=user1, server=user1.dyndns.org)
2012/04/22 12:45:02 2B1114B0 h HTTP Server listening on port 3015
2012/04/22 12:45:02 2B2114B0 r reader thread started (thread=2B2114B0, label=um02, device=/dev/sci0, detect=cd, mhz=500, cardmhz=368)
2012/04/22 12:45:02 2B3114B0 p connecting to user1.dyndns.org
2012/04/22 12:45:02 2B4114B0 p proxy thread started (thread=2B4114B0, label=user2, server=user2.dyndns.org)
2012/04/22 12:45:02 2B4114B0 p connecting to user2.dyndns.org
2012/04/22 12:45:02 2B2114B0 r um02 card detected
2012/04/22 12:45:04 2B2114B0 r ATR: 3F ... 12
2012/04/22 12:45:05 2B2114B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2012/04/22 12:45:06 2B2114B0 r detect native nagra card
2012/04/22 12:45:06 2B2114B0 r [nagra-reader] type: NAGRA, caid: 1838, IRD ID: FF FF FF FF
2012/04/22 12:45:06 2B2114B0 r [nagra-reader] ProviderID: 00 00 04 01
2012/04/22 12:45:06 2B2114B0 r [nagra-reader] active to: 2012/07/16 12:59
2012/04/22 12:45:06 2B2114B0 r -----------------------------------------
2012/04/22 12:45:06 2B2114B0 r |id |tier |valid from |valid to |
2012/04/22 12:45:06 2B2114B0 r +----+--------+------------+------------+
2012/04/22 12:45:06 2B2114B0 r |1103|318D |2012/03/25 |2012/07/16 |
2012/04/22 12:45:06 2B2114B0 r |1103|3084 |2012/03/25 |2012/07/16 |
2012/04/22 12:45:06 2B2114B0 r |1103|318C |2012/03/25 |2012/07/16 |
2012/04/22 12:45:06 2B2114B0 r |1103|57F8 |2012/03/25 |2012/07/16 |
2012/04/22 12:45:06 2B2114B0 r |1103|318E |2012/03/25 |2012/07/16 |
2012/04/22 12:45:07 2B2114B0 r |1103|D4A7 |2012/03/25 |2012/07/16 |
2012/04/22 12:45:07 2B2114B0 r |1103|5794 |2012/03/25 |2012/07/16 |
2012/04/22 12:45:07 2B2114B0 r |1103|585D |2012/03/25 |2012/07/16 |
2012/04/22 12:45:07 2B2114B0 r |1103|5924 |2012/03/25 |2012/07/16 |
2012/04/22 12:45:07 2B2114B0 r |1103|D4C6 |2012/03/25 |2012/07/16 |
2012/04/22 12:45:07 2B2114B0 r -----------------------------------------
2012/04/22 12:45:07 2B2114B0 r found cardsystem nagra
2012/04/22 12:45:07 2B2114B0 r ROM: D N A S P 1 4 2
2012/04/22 12:45:07 2B2114B0 r REV: R e v G 0 6
2012/04/22 12:45:07 2B2114B0 r SER: xx xx xx xx
2012/04/22 12:45:07 2B2114B0 r CAID: 1838
2012/04/22 12:45:07 2B2114B0 r Prv.ID: 00 00 04 01 (sysid)
2012/04/22 12:45:07 2B2114B0 r Prv.ID: 00 00 00 00
2012/04/22 12:45:07 2B2114B0 r Prv.ID: 00 00 11 03
2012/04/22 12:45:07 2B2114B0 r [nagra-reader] ready for requests
2012/04/22 12:45:08 2AAC6810 s init for all local cards done
2012/04/22 12:45:08 2AAC6810 s anti cascading disabled
2012/04/22 12:45:08 2B87B4B0 c anonymous disconnected from 132.433.345.12
2012/04/22 12:45:08 2B87B4B0 c thread 2B87B4B0 ended!
2012/04/22 12:45:08 2B97B4B0 c anonymous disconnected from 122.12.12.12
2012/04/22 12:45:08 2B97B4B0 c thread 2B97B4B0 ended!
2012/04/22 12:45:08 2B77B4B0 c plain dvbapi-client granted (DVBApi, au=auto (3 reader))
2012/04/22 12:45:08 2B77B4B0 c dvbapi: 1 entries read from oscam.dvbapi
2012/04/22 12:45:08 2BA7B4B0 c encrypted cccam-client 123.123.123.123 granted (mclient1, au=off)
2012/04/22 12:45:08 2BB7B4B0 c encrypted cccam-client 234.234.234.234 granted (mclient2, au=off)
2012/04/22 12:45:12 2B77B4B0 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 175E PROVID: 000000
2012/04/22 12:45:12 2B77B4B0 c dvbapi: [ADD PID 1] CAID: 1831 ECM_PID: 1A5E PROVID: 000000
2012/04/22 12:45:12 2B77B4B0 c dvbapi: [ADD PID 2] CAID: 1835 ECM_PID: 1C46 PROVID: 000000
2012/04/22 12:45:12 2B77B4B0 c dvbapi: [ADD PID 3] CAID: 1838 ECM_PID: 1E46 PROVID: 000000
2012/04/22 12:45:12 2B77B4B0 c dvbapi: new program number: 002A (13th Street)
2012/04/22 12:45:12 2B77B4B0 c housekeeping lb stats thread started
2012/04/22 12:45:12 2B77B4B0 c dvbapi: Start descrambling PID #3 (CAID: 1838) 1
2012/04/22 12:45:12 2B77B4B0 c DVBApi (1838&000000/002A/92:B8F5): found (300 ms) by um02 (of 1 avail 1)
2012/04/22 12:45:13 2B87B4B0 c encrypted cccam-client 123.123.123.123 granted (mclient1, au=off)
2012/04/22 12:45:13 2BDB54B0 c encrypted cccam-client 234.234.234.234 granted (mclient2, au=off)
2012/04/22 12:45:19 2B87B4B0 c user1 (1838&000000/4E88/92:7D56): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/04/22 12:45:22 2B5114B0 p user2network connect error!
2012/04/22 12:45:22 2B4114B0 p can't resolve user1.dyndns.org, error: Name or service not known
2012/04/22 12:45:22 2B4114B0 p user1.dyndns.org resolved ip=0.0.0.0

Hoffe, ihr könnt damit was anfangen und mir einen Tipp geben - danke!

Gruß
STAN

Edit: Geht wieder! Oscam getauscht - kein Erfolg - Netzwerk in der Dream neu gestartet: geht!!!???!!
Seit ich (zwangsweise) auf Oscam umgestiegen bin, habe ich nur Probleme! Hoffentlich legt sich das jetzt mal langsam!