AW: Oscam sendet keien ecm 0ms!!!!!!!
geht nicht ,ich muss noch den reader richtig einstellen das medlet error an obwohl die karte im CCcam angezeigt wird
liegt das an der newcamd Einstellung? wegen der 000000
[newcamd]
key = 0102030405060708091011121314
port = 34000@0500:000000
2009/11/29 12:57:53 5688 s version=0.99.4, system=i386-pc-linux, nice=-1
2009/11/29 12:57:53 5688 s max. clients=509, client max. idle=120 sec
2009/11/29 12:57:53 5688 s max. logsize=unlimited
2009/11/29 12:57:53 5688 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2009/11/29 12:57:53 5688 s shared memory initialized (size=3660584, id=14155807)
2009/11/29 12:57:53 5688 s auth size=4732
2009/11/29 12:57:53 5688 s Cannot open file "/usr/local/etc/oscam.services" (errno=2)
2009/11/29 12:57:53 5688 s userdb reloaded: 0 accounts freed, 1 accounts loaded
2009/11/29 12:57:53 5688 s signal handling initialized (type=sysv)
2009/11/29 12:57:53 5688 s 2276 service-id's loaded
2009/11/29 12:57:53 5689 s monitor: initialized (fd=6, port=988)
2009/11/29 12:57:53 5689 s camd 3.3x: disabled
2009/11/29 12:57:53 5689 s camd 3.5x: disabled
2009/11/29 12:57:53 5689 s cs378x: disabled
2009/11/29 12:57:53 5689 s newcamd: initialized (fd=7, port=34000, crypted)
2009/11/29 12:57:53 5689 s CAID: 0500
2009/11/29 12:57:53 5689 s provid #0: 030700
2009/11/29 12:57:53 5689 s provid #1: FFFF92
2009/11/29 12:57:53 5689 s radegast: disabled
2009/11/29 12:57:53 5689 s resolver thread started
2009/11/29 12:57:53 5689 s logger started (pid=5692)
2009/11/29 12:57:53 5689 s resolver started (pid=5693, delay=30 sec)
2009/11/29 12:57:53 5689 s reader started (pid=5694, device=/dev/ttyUSB4, detect=cd, mhz=357)
2009/11/29 12:57:53 5689 s Waiting for local card init ....
2009/11/29 12:57:56 5694 r02 card detected
2009/11/29 12:58:01 5694 r02 ATR: 3F 77 18 00 00 C2 3F 77 xxxxxxxx
2009/11/29 12:58:02 5694 r02 card system not supported
2009/11/29 12:58:02 5694 r02 card initializing error
2009/11/29 12:58:02 5689 s Init for all local cards done !
2009/11/29 12:58:02 5689 s anti cascading disabled
2009/11/29 12:58:02 5689 s client(1) connect from 78.42.1.xx (pid=5696, pipfd=14)
2009/11/29 12:58:02 5696 c01 Connection closed to client
2009/11/29 12:58:12 5689 s client(1) connect from 78.42.1.xx(pid=5698, pipfd=14)
2009/11/29 12:58:12 5698 c01 encrypted newcamd:34000-client 78.42.1.33 granted (CCcam1, au=1)
2009/11/29 12:58:12 5698 c01 user CCcam1 authenticated successfully (using client 4343)
2009/11/29 12:58:12 5698 c01 AU wont be used on this port -> disable AU
2009/11/29 12:58:12 5698 c01 CCcam1 (0500&030700/20F5/2F:74A7): rejected user ident (0 ms)
2009/11/29 12:58:21 5698 c01 CCcam1 (0500&030700/20F5/2F:74A6): rejected user ident (0 ms)
2009/11/29 12:58:31 5698 c01 CCcam1 (0500&030700/20F5/2F:6774): rejected user ident (0 ms)
2009/11/29 12:58:41 5698 c01 CCcam1 (0500&030700/20F5/2F:6775): rejected user ident (0 ms)
2009/11/29 12:28:01 5021 c01 CCcam1 (0500&030700/20F5/2F:E1A6): not found (1 ms)
2009/11/29 12:28:11 5021 c01 CCcam1 (0500&030700/20F5/2F:95AC): not found (2 ms)
2009/11/29 12:28:21 5021 c01 CCcam1 (0500&030700/20F5/2F:95AD): not found (2 ms)
2009/11/29 12:28:31 5021 c01 CCcam1 (0500&030700/20F5/2F:3F9D): not found (2 ms)
2009/11/29 12:28:41 5021 c01 CCcam1 (0500&030700/20F5/2F:3F9C): not found (2 ms)
2009/11/29 12:28:51 5021 c01 CCcam1 (0500&030700/20F5/2F:60C7): not found (3 ms)
2009/11/29 12:29:01 5021 c01 CCcam1 (0500&030700/20F5/2F:60C6): not found (2 ms)
2009/11/29 12:29:11 5021 c01 CCcam1 (0500&030700/20F5/2F:3D1C): not found (2 ms)