1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Talk Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

Dieses Thema im Forum "CS CCcam" wurde erstellt von astracoupe, 28. Oktober 2012.

  1. astracoupe
    Offline

    astracoupe Newbie

    Registriert:
    18. März 2011
    Beiträge:
    14
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    Hallo bekomme die HD02 (schwarz) nicht zum laufen! Die S02 funktioniert 1A

    Hier mal die configs (cccam)

    F: ***** *****
    SERVER LISTEN PORT : 12000
    ALLOW WEBINFO: yes
    SHOW EXTENEDED CLIENT INFO : yes
    WEBINFO LISTEN PORT : 16001
    ALLOW TELNETINFO: yes
    TELNETINFO LISTEN PORT : 16000
    TELNETINFO USERNAME : cccam
    TELNETINFO PASSWORD : cccam
    SERIAL READER : /dev/ttyUSB0 Reader 1
    SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
    DISABLE EMM : no
    EXTRA EMM LEVEL : no
    SHOW TIMING : yes
    DEBUG : yes
    SOFTKEY FILE : /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
    AUTOROLL FILE : /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
    STATIC CW FILE : /var/media/ftp/uStor01/cs/cccam/constant.cw
    CAID PRIO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.prio
    PROVIDERINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.providers
    MINIMUM CLIENT VERSION : 2.0.9
    #MINIMUM DOWNHOPS: 1

    Hier die oscam config

    [global]
    serverip = 192.168.178.001
    logfile = stdout
    clienttimeout = 7500
    lb_mode = 1
    lb_save = 800
    lb_savepath = /var/media/ftp/uStor01/cs/oscam/savepath/.oscam/stat
    lb_nbest_readers = 1
    lb_nfb_readers = 2
    lb_min_ecmcount = 5
    lb_max_ecmcount = 250
    lb_reopen_seconds = 120
    lb_retrylimit = 800
    lb_retrylimits =
    lb_nbest_percaid =
    lb_noproviderforcaid = 09C4
    lb_stat_cleanup = 336
    lb_use_locking = 1
    lb_reopen_mode = 1
    lb_max_readers = 5
    lb_auto_betatunnel = 0
    double_check = 0
    fallbacktimeout = 2600
    clientmaxidle = 120
    cachedelay = 120
    bindwait = 120
    resolvedelay = 30
    unlockparental = 0
    nice = -1
    serialreadertimeout = 1500
    maxlogsize = 2480
    waitforcards = 0
    preferlocalcards = 1
    saveinithistory = 1
    readerrestartseconds = 5
    resolvegethostbyname = 0

    #[monitor]
    #port = 988
    #nocrypt = 192.168.0.0-192.168.255.255
    #aulow = 120
    #hideclient_to = 0
    #monlevel = 4
    #appendchaninfo = 1

    [cccam]
    port = 51070
    reshare = 0
    version = 2.1.1
    ignorereshare = 0
    minimizecards = 0
    stealth = 0
    updateinterval = 240
    keepconnected = 1
    forward_origin_card = 1

    [webif]
    httpport = 20282
    httpuser = oscam
    httppwd = freetz
    httpcss = /var/media/ftp/uStor01/cs/oscam//style.css
    httprefresh = 10
    httpallowed = 127.0.0.1,192.168.177.1-192.168.178.255
    httphideidleclients = 0
    httpreadonly = 0
    httpsavefullcfg = 0

    die oscam.server

    [reader]
    label = skysat
    protocol = mouse
    device = /dev/ttyUSB0
    services = skyde
    caid = 1702,1833
    boxkey = 1122334455667788
    ecmwhitelist = 1702:93
    detect = cd
    mhz = 600
    cardmhz = 600
    group = 2
    emmcache = 1,3,2
    lb_weight = 300


    [reader]
    label = austriasat_camd3
    protocol = camd35
    device = 127.0.0.1,34000
    user = FB-CS-Server-AustriaSat
    password = Local
    services = austriasat
    inactivitytimeout = 0
    caid = 0D05
    ecmwhitelist = 0D05@000010:9C
    group = 3


    [reader]
    label = orf_camd3
    protocol = camd35
    device = 127.0.0.1,34000
    user = FB-CS-Server-ORF
    password = Local1
    services = orfcw
    inactivitytimeout = 0
    caid = 0D05
    ecmwhitelist = 0D05@000004:9C
    group = 4

    hir die oscam user

    [account] ###User Home-Client
    user = cccam
    pwd = cccam
    group = 1,2,3,4
    au = hdplussat,skysat
    services = hdplus,skyde,orfcw,austriasat,hdaustria
    caid = 1830,1702,1833,0d05,0648
    betatunnel = 1833.0078:1702,1833.006A:1702,1833.006B:1702,1833. 006F:1702,1833.0070:1702,1833.0071:1702,1833.0072: 1702,1833.0077:1702,1833.0081:1702,1833.0069:1702, 1833.0082:1702,1833.0083:1702,1833.0084:1702,1833. 007C:1702,1833.0076:1702,1833.0075:1702,1833.006C: 1702
    cccmaxhops = 2
    keepalive = 1
    numusers = 0
    penalty = 0
    #
    [account] ### User Inet-Client
    user = *****
    pwd = *****
    group = 1,2
    au = 0
    services = hdplus,skyde
    caid = 1830,1702,1833
    betatunnel = 1833.0078:1702,1833.006A:1702,1833.006B:1702,1833. 006F:1702,1833.0070:1702,1833.0071:1702,1833.0072: 1702,1833.0077:1702,1833.0081:1702,1833.0069:1702, 1833.0082:1702,1833.0083:1702,1833.0084:1702,1833. 007C:1702,1833.0076:1702,1833.0075:1702,1833.006C: 1702
    cccmaxhops = 0
    keepalive = 1
    numusers = 0
    penalty = 0
     
    #1
  2. phantom

    Nervigen User Advertisement

  3. Kermit
    Online

    Kermit Guest

    AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

    Hi,

    mit was versuchst du denn jetzt wirklich die HD+ Karte zu lesen? In der oscam.server ist kein passender Eintrag zu finden.
    Um die HD02 lesen zu können über CCcam wird CCcam in Version 2.3.0 benötigt und der Reader Eintrag in der CCcam.cfg ist dann auch falsch.
    Die Kombination OScam/CCcam birgt zudem diverse Fallstricke. Warum machst du nicht alles entweder nur über CCcam oder OScam?

    Grüße

    Kermit
     
    #2
  4. astracoupe
    Offline

    astracoupe Newbie

    Registriert:
    18. März 2011
    Beiträge:
    14
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

    Hättest du ne einstellung für hd02 und s02 über oscam?
     
    #3
  5. Kermit
    Online

    Kermit Guest

    AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

    Hi,

    hier

    Dieser Link ist nur für Mitglieder!!! Jetzt kostenlos Registrieren ?

    findest du Vorschläge für diverse Kartentypen. Jedem Reader gibst du seine eigene Gruppe und bei den Usern kannst du dann group = 1,2 festlegen oder auch eingrenzen, wer was nicht bekommen darf. die passenden Keys für den HD02 Reader kannst du dir am besten über dieses

    Dieser Link ist nur für Mitglieder!!! Jetzt kostenlos Registrieren ?

    Tool holen.
    Deine Clients sind wahrscheinlich mit CCcam ausgerüstest und dann kommt folgender Link

    Dieser Link ist nur für Mitglieder!!! Jetzt kostenlos Registrieren ?

    noch hinzu.

    Grüße

    Kermit
     
    #4
  6. astracoupe
    Offline

    astracoupe Newbie

    Registriert:
    18. März 2011
    Beiträge:
    14
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

    Ne client ist momentan noch ne Kathrein UFS910 die kann kein cccam. Später kommt noch ne vu+ ultimo hinzu
     
    #5
  7. Kermit
    Online

    Kermit Guest

    AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

    Hi,

    OK, aber dann läuft auf der Kathrein OScam oder was hast du dort für eine Cam laufen?
    Wenn es OScam ist, dann bindest du die C-Line entsprechend in der oscam.server ein und gut ist.

    Grüße

    Kermit
     
    #6
  8. joopastron
    Offline

    joopastron Chef Mod Digital Eliteboard Team

    Registriert:
    3. März 2011
    Beiträge:
    19.313
    Zustimmungen:
    12.414
    Punkte für Erfolge:
    113
    Geschlecht:
    männlich
    Beruf:
    Immer bei der Sache
    AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

    Bedenke auch das du den Eintrage DVBAPI benötigst auf dem Client

    [dvbapi]
    enabled = 1
    au = 1
    boxtype = ufs910
    user = dvbapi
    pmt_mode = 0

    oscam.user:

    [account]
    user = dvbapi
    pwd = dvbapi
    group = 1
    au = 1
    uniq = 0
     
    #7
  9. astracoupe
    Offline

    astracoupe Newbie

    Registriert:
    18. März 2011
    Beiträge:
    14
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

    So hab jetzt auf easymouse2 gewechselt! Sky funkt 1A aber die HD02 wird nicht hell! Hier mal die configs und der log

    oscam.conf

    [global]
    #logfile = /var/media/ftp/System/logs/oscam.log
    disablelog = 1
    disableuserfile = 0
    usrfileflag = 0
    clienttimeout = 5000
    fallbacktimeout = 2500
    clientmaxidle = 120
    cachedelay = 120
    bindwait = 120
    netprio = 0
    clientdyndns = 0
    resolvedelay = 30
    unlockparental = 0
    nice = -1
    serialreadertimeout = 1500
    maxlogsize = 2480
    waitforcards = 1
    preferlocalcards = 0
    saveinithistory = 1
    readerrestartseconds = 5
    resolvegethostbyname = 0

    [monitor]
    port = 988
    aulow = 120
    hideclient/to = 0
    monlevel = 4
    appendchaninfo = 1

    [newcamd]
    #port = 56780@0d95:000000
    port = 56781@1830:003411
    port = 56782@1702:000000
    key = 0102030405060708091011121314
    keepalive = 1
    mgclient = 0

    [camd35]
    port = 55555 << für L:Line zum CCcam für die ORF 0d95 Karte -- testen!! und berichten!!

    [webif]
    httpport = 56783
    httpuser = oscam
    httppwd = oscam
    httprefresh = 10
    httpallowed = 127.0.0.1,192.168.177.1-192.168.178.255
    httphideidleclients = 0
    httpreadonly = 0

    oscam.server

    [reader]
    label = skysat
    protocol = mouse
    device = /dev/ttyUSB1
    caid = 1702,1833
    boxkey = 1122334455667788
    detect = cd
    mhz = 600
    cardmhz = 600
    group = 2
    emmcache = 1,1,2

    [reader]
    label = HD+
    device = /dev/ttyUSB0
    Protocol = mouse
    detect = cd
    enable = 1
    mhz = 357
    cardmhz = 368
    smargopatch = 1
    CAID = 1843
    ident = 1843:003411
    emmcache = 1,3,2
    group = 1
    rsakey = BF3xxxxxxxEF0
    boxkey = A7xxxxxx7C

    oscam.user

    [account]
    user = 4all_HDplus
    pwd = hdplus_share4all
    disabled = 0
    group = 1
    uniq = 1
    sleep = 0
    monlevel = 0
    au = hdplussat
    #services = hdplus
    caid = 1830
    ident = 1830:003411
    cccmaxhops = 10
    keepalive = 1
    numusers = 0
    penalty = 0

    [account]
    user = 4all_SkySAT
    pwd = skySAT_share4all
    disabled = 0
    group = 2
    uniq = 1
    sleep = 0
    monlevel = 0
    au = skysat
    #services = SkyGermany
    caid = 1702,1833
    betatunnel = 1833.FFFF:1702
    ident = 1702:000000
    cccmaxhops = 10
    keepalive = 1
    numusers = 0
    penalty = 0

    oscam.services

    [hdplus]
    caid = 1830,1843
    provid = 000000,003411,008011
    srvid = EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,5273,5274, 1519

    [SkyGermany]
    caid=1702,1833
    srvid=006f,0070,0071,0072,006b,006a,000A,000B,002B,0029,0009,0014,0204,0008,0203,0019,0083,0082,0081,0084,002a,0010,0024,0017,0032,001d,001b,0022,001c,0013,001a,000e,000d,000c,00a8,0206,0016,0018,0034,0015,000f,00df,0106,0110,2011a,0124,012e,0138,0142,014c,0156,0160,00fc,003c,003d,3397,4461,4462,003f,003e,3393,0042,3394,700A,0044,3398,0043,6ff1,7009,3331,3395,0035,0096,0097,0098,0099,009A,009B,009C,0015,0201,0159,0163,016d,0046,0011,00dd,00de,00fd,014d,0143,0139,012f,S0125,011b,0107,0111,016b,0175,0078


    oscam.provid

    # oscam.provid

    1830:003411|SES Astra HD+|Astra 19.2E|German
    09C4:000000|SKY Deutschland|Astra 19.2E|German
    0B00:000000|MTV unlimited|Astra 19.2E|English


    verbindung von oscamm zu cccam

    cccam.config

    CCcam config
    #N: 127.0.0.1 56780 4all_ORF orf_share4all 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
    L: 127.0.0.1 55555 4all_ORF orf_share4all 0d95 000000 256 #<< das muss erst jemand bestätigen!
    N: 127.0.0.1 56781 4all_HDplus hdplus_share4all 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    N: 127.0.0.1 56782 4all_SkySAT skySAT_share4all 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    F: ufs910 kathrein
    SERVER LISTEN PORT : 12000
    ALLOW WEBINFO: yes
    SHOW EXTENEDED CLIENT INFO : yes
    WEBINFO LISTEN PORT : 16001
    ALLOW TELNETINFO: yes
    TELNETINFO LISTEN PORT : 16000
    TELNETINFO USERNAME : cccam
    TELNETINFO PASSWORD : cccam
    DISABLE EMM : no
    EXTRA EMM LEVEL : no
    SHOW TIMING : yes
    DEBUG : yes
    SOFTKEY FILE : /Chroot/chroot-rootfs/var/etc/cccam/SoftCam.Key
    AUTOROLL FILE : /Chroot/chroot-rootfs/var/etc/cccam/AutoRoll.Key
    STATIC CW FILE : /Chroot/chroot-rootfs/var/etc/cccam/constant.cw
    CAID PRIO FILE : /Chroot/chroot-rootfs/var/etc/cccam/CCcam.prio
    PROVIDERINFO FILE : /Chroot/chroot-rootfs/var/etc/cccam/CCcam.providers
    MINIMUM CLIENT VERSION : 2.0.9
    #MINIMUM DOWNHOPS: 1

    oscam.log

    2012/11/10 17:10:40 5DB908 r hd+ [mouse] card system not supported
    2012/11/10 17:10:40 5DB908 r hd+ [mouse] Normal mode failed, reverting to Deprecated Mode
    2012/11/10 17:10:45 5DB908 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
    2012/11/10 17:10:46 5DB908 r hd+ [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.57 Mhz as specified by user in reader MHZ setting ?????
    2012/11/10 17:10:47 5DB908 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 28
    2012/11/10 17:10:48 5DB908 r hd+ [mouse] detect native nagra card
    2012/11/10 17:10:52 5DB908 r hd+ [mouse] T1 Resync command error, trying to reactivate!
    2012/11/10 17:10:57 5DB908 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
    2012/11/10 17:10:58 5DB908 r hd+ [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.57 Mhz as specified by user in reader MHZ setting
    2012/11/10 17:10:58 5DB908 r hd+ [mouse] Card responded ok for ifsd request of 28
    2012/11/10 17:10:59 5DB908 r hd+ [mouse] type: NAGRA, caid: 1843, IRD ID: ############
    2012/11/10 17:10:59 5DB908 r hd+ [mouse] ProviderID: 00 00 34 11
    2012/11/10 17:10:59 5DB908 r hd+ [mouse] active to: 2012/12/26 11:59
    2012/11/10 17:10:59 5DB908 r hd+ [mouse] -----------------------------------------
    2012/11/10 17:10:59 5DB908 r hd+ [mouse] |id |tier |valid from |valid to |
    2012/11/10 17:10:59 5DB908 r hd+ [mouse] +----+--------+------------+------------+
    2012/11/10 17:10:59 5DB908 r hd+ [mouse] |8011|0066 |2011/05/16 |2012/05/16 |
    2012/11/10 17:10:59 5DB908 r hd+ [mouse] |8011|0067 |2010/01/19 |2010/01/20 |
    2012/11/10 17:10:59 5DB908 r hd+ [mouse] |8011|0BEA |2012/05/27 |2013/07/01 |
    2012/11/10 17:10:59 5DB908 r hd+ [mouse] -----------------------------------------
    2012/11/10 17:11:02 5DB908 r hd+ [mouse] T1 Resync command error, trying to reactivate!
    2012/11/10 17:11:06 5DB908 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
    2012/11/10 17:11:08 5DB908 r hd+ [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.57 Mhz as specified by user in reader MHZ setting
    2012/11/10 17:11:08 5DB908 r hd+ [mouse] Card responded ok for ifsd request of 28
    2012/11/10 17:11:08 5DB908 r hd+ [mouse] card system not supported
    2012/11/10 17:11:08 5DB908 r hd+ [mouse] card initializing error
    2012/11/10 17:11:09 0 s init for all local cards done
    2012/11/10 17:11:09 0 s anti cascading disabled
    2012/11/10 17:11:09 5E6D80 c client connected to 56782 port
    2012/11/10 17:11:09 5E6D80 c anonymous disconnected from 127.0.0.1
    2012/11/10 17:11:09 5E8588 c client connected to 56782 port
    2012/11/10 17:11:09 0 --- Skipped 1 duplicated log lines ---
    2012/11/10 17:11:09 5E5578 c anonymous disconnected from 127.0.0.1
    2012/11/10 17:11:09 5E3590 c client connected to 56782 port
    2012/11/10 17:11:09 5E3590 c anonymous disconnected from 127.0.0.1
    2012/11/10 17:11:09 5E8588 c encrypted newcamd:56782-client 127.0.0.1 granted (4all_SkySAT, au=on (1 reader))
    2012/11/10 17:11:09 5E8588 c user 4all_SkySAT authenticated successfully (CCcam)
    2012/11/10 17:11:09 5E8588 c AU enabled for user 4all_SkySAT on reader skysat
    2012/11/10 17:11:15 5E8588 c 4all_SkySAT (1702&000000/0000/0009/93:46ED): found (3004 ms) by skysat - 1702:0009 unknown
    2012/11/10 17:11:23 5E8588 c 4all_SkySAT (1702&000000/0000/0009/93:C40E): found (632 ms) by skysat - 1702:0009 unknown
    2012/11/10 17:11:33 5E8588 c 4all_SkySAT (1702&000000/0000/0009/93:4F7B): found (623 ms) by skysat - 1702:0009 unknown
     
    #8
  10. Kermit
    Online

    Kermit Guest

    AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

    Hi,

    nimm in der oscam.server den Parameter ident raus und setze mhz auf 368.

    Grüße

    Kermit
     
    #9
  11. astracoupe
    Offline

    astracoupe Newbie

    Registriert:
    18. März 2011
    Beiträge:
    14
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

    Geht leider immer noch nicht!

    der neue log

    2012/11/10 17:18:45 5DB908 r hd+ [mouse] Card responded ok for ifsd request of 28
    2012/11/10 17:18:45 5DB908 r hd+ [mouse] card system not supported
    2012/11/10 17:18:45 5DB908 r hd+ [mouse] Normal mode failed, reverting to Deprecated Mode
    2012/11/10 17:18:50 5DB908 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
    2012/11/10 17:18:51 5DB908 r hd+ [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.68 Mhz as specified by user in reader MHZ setting
    2012/11/10 17:18:52 5DB908 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 28
    2012/11/10 17:18:53 5DB908 r hd+ [mouse] detect native nagra card
    2012/11/10 17:18:55 5DB908 r hd+ [mouse] T1 Resync command error, trying to reactivate!
    2012/11/10 17:19:00 5DB908 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
    2012/11/10 17:19:01 5DB908 r hd+ [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.68 Mhz as specified by user in reader MHZ setting
    2012/11/10 17:19:01 5DB908 r hd+ [mouse] Card responded ok for ifsd request of 28
    2012/11/10 17:19:02 5DB908 r hd+ [mouse] type: NAGRA, caid: 1843, IRD ID: ############
    2012/11/10 17:19:02 5DB908 r hd+ [mouse] ProviderID: 00 00 34 11
    2012/11/10 17:19:02 5DB908 r hd+ [mouse] active to: 2012/12/26 11:59
    2012/11/10 17:19:02 5DB908 r hd+ [mouse] -----------------------------------------
    2012/11/10 17:19:02 5DB908 r hd+ [mouse] |id |tier |valid from |valid to |
    2012/11/10 17:19:02 5DB908 r hd+ [mouse] +----+--------+------------+------------+
    2012/11/10 17:19:02 5DB908 r hd+ [mouse] |8011|0066 |2011/05/16 |2012/05/16 |
    2012/11/10 17:19:03 5DB908 r hd+ [mouse] |8011|0067 |2010/01/19 |2010/01/20 |
    2012/11/10 17:19:03 5DB908 r hd+ [mouse] |8011|0BEA |2012/05/27 |2013/07/01 |
    2012/11/10 17:19:03 5DB908 r hd+ [mouse] -----------------------------------------
    2012/11/10 17:19:05 5DB908 r hd+ [mouse] T1 Resync command error, trying to reactivate!
    2012/11/10 17:19:10 5DB908 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
    2012/11/10 17:19:11 5DB908 r hd+ [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.68 Mhz as specified by user in reader MHZ setting
    2012/11/10 17:19:11 5DB908 r hd+ [mouse] Card responded ok for ifsd request of 28
    2012/11/10 17:19:11 5DB908 r hd+ [mouse] card system not supported
    2012/11/10 17:19:11 5DB908 r hd+ [mouse] card initializing error
    2012/11/10 17:19:12 0 s init for all local cards done
    2012/11/10 17:19:12 0 s anti cascading disabled
    2012/11/10 17:19:12 5E7FD0 c client connected to 56782 port
    2012/11/10 17:19:12 0 --- Skipped 1 duplicated log lines ---
    2012/11/10 17:19:12 5E67C8 c anonymous disconnected from 127.0.0.1
    2012/11/10 17:19:12 5E4FC0 c client connected to 56782 port
    2012/11/10 17:19:12 5E4FC0 c anonymous disconnected from 127.0.0.1
    2012/11/10 17:19:12 5E2930 c client connected to 56782 port
    2012/11/10 17:19:12 5E2930 c anonymous disconnected from 127.0.0.1
    2012/11/10 17:19:12 5E7FD0 c encrypted newcamd:56782-client 127.0.0.1 granted (4all_SkySAT, au=on (1 reader))
    2012/11/10 17:19:12 5E7FD0 c user 4all_SkySAT authenticated successfully (CCcam)
    2012/11/10 17:19:12 5E7FD0 c AU enabled for user 4all_SkySAT on reader skysat
    2012/11/10 17:19:12 5E7FD0 c 4all_SkySAT (1702&000000/0000/0009/93:2A4B): found (644 ms) by skysat - 1702:0009 unknown
    2012/11/10 17:19:22 5E7FD0 c 4all_SkySAT (1702&000000/0000/0009/93:3944): found (634 ms) by skysat - 1702:0009 unknown
     
    #10
  12. astracoupe
    Offline

    astracoupe Newbie

    Registriert:
    18. März 2011
    Beiträge:
    14
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

    Hd02 läuft jetzt (wird vom Oscam erkannt) Wird aber auf dem Client (UFS910) nicht hell

    oscam.server

    [reader]
    Label = HDplusHD02
    Protocol = mouse
    Device = /dev/ttyUSB0
    cardmhz = 368
    Detect = CD
    Group = 1
    CAID = 1843
    rsakey = BF3xxxxxxD5
    boxkey = A76xxxxxx37C
    EMMCache = 1,1,2

    Client einstellungen

    oscam.server

    [reader]
    label = VIP
    protocol = cccam
    device = 192.168.178.1,12000
    account = ufs910,kathrein
    group = 1,2
    emmcache = 1,1,2
    detect = CD
    caid = 1702,1833,1830,0D05,0500,0B00,0100,1722,1834,1843
    cccversion = 2.1.3
    cccbuild = 3316

    oscam.user

    oscam.user

    ##### oscam.user#############
    #
    [account]
    user = dvbapi
    pwd = dvbapi
    group = 1,2
    au = 1
    uniq=0
    betatunnel = 1833.FFFF:1702
    #
    ######## Ende ##############

    oscam.conf

    oscam.conf

    ############# oscam.conf ##################################
    # #
    [global]
    Nice = -1
    ClientTimeout = 7
    FallbackTimeout=3
    ClientMaxIdle=120
    CacheDelay = 120
    BindWait = 5
    ResolveDelay = 15
    WaitForCards = 1
    PreferLocalCards = 1
    LogFile = stdout
    saveinithistory = 1
    readerrestartseconds = 5
    #LogFile = /var/keys/oscam.log
    #usrfile = /var/keys/oscam_usr.log

    [monitor]
    nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
    appendchaninfo = 1

    [webif]
    httpport = 12345
    httpuser = admin
    httppwd = oscam
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

    [dvbapi]
    enabled = 1
    au = 1
    boxtype = ufs910
    user = dvbapi
    #
    ########################## Ende ##########################################

    DVBAPI

    [dvbapi]
    enabled = 1
    au = 1
    boxtype = ufs910
    user = dvbapi
    pmt_mode = 0

    Client bekommt alles vom cccam

    cccam.cfg

    CCcam config
    #N: 127.0.0.1 56780 4all_ORF orf_share4all 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
    L: 127.0.0.1 55555 4all_ORF orf_share4all 0d95 000000 256 #<< das muss erst jemand bestätigen!
    N: 127.0.0.1 56781 4all_HDplus hdplus_share4all 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    N: 127.0.0.1 56782 4all_SkySAT skySAT_share4all 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    F: ufs910 kathrein
    SERVER LISTEN PORT : 12000
    ALLOW WEBINFO: yes
    SHOW EXTENEDED CLIENT INFO : yes
    WEBINFO LISTEN PORT : 16001
    ALLOW TELNETINFO: yes
    TELNETINFO LISTEN PORT : 16000
    TELNETINFO USERNAME : cccam
    TELNETINFO PASSWORD : cccam
    DISABLE EMM : no
    EXTRA EMM LEVEL : no
    SHOW TIMING : yes
    DEBUG : yes
    SOFTKEY FILE : /Chroot/chroot-rootfs/var/etc/cccam/SoftCam.Key
    AUTOROLL FILE : /Chroot/chroot-rootfs/var/etc/cccam/AutoRoll.Key
    STATIC CW FILE : /Chroot/chroot-rootfs/var/etc/cccam/constant.cw
    CAID PRIO FILE : /Chroot/chroot-rootfs/var/etc/cccam/CCcam.prio
    PROVIDERINFO FILE : /Chroot/chroot-rootfs/var/etc/cccam/CCcam.providers
    MINIMUM CLIENT VERSION : 2.0.9
    #MINIMUM DOWNHOPS: 1
     
    #11
  13. bombadil
    Offline

    bombadil MFC Digital Eliteboard Team

    Registriert:
    2. Oktober 2008
    Beiträge:
    11.816
    Zustimmungen:
    9.118
    Punkte für Erfolge:
    113
    Beruf:
    Kaufmann
    Ort:
    Mittelerde
    AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

    Hi,

    bin mir nicht sicher, ob das für die Kathi stimmt

    Code:
     account = ufs910,kathrein
    sonst versuche das so

    Code:
    user = ufs910
    pwd = kathrein
    Der User dvbapi braucht kein Passwort

    Code:
     pwd = dvbapi
    löschen

    Liebe Grüße
    Bombadil
     
    #12
  14. astracoupe
    Offline

    astracoupe Newbie

    Registriert:
    18. März 2011
    Beiträge:
    14
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: Fritzbox7270 cccam mit S02 smargo 1.7 + HD02 smargo 1.7 an oscam client (UFS910)

    Hat nicht funktioniert! Mit der änderung geht nicht mal Sky!
     
    #13

Diese Seite empfehlen