AW: DM 800 Oscam liest Karte im Smargo nicht
So, mal ein Script nach dem Start.
2012/01/15 21:14:15 2AAC6C20 s can't open file "/var/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/01/15 21:14:15 2AAC6C20 s 0 lengths for caid guessing loaded
2012/01/15 21:14:15 2AAC6C20 s monitor: initialized (fd=7, port=5000)
2012/01/15 21:14:15 2AAC6C20 s camd33: disabled
2012/01/15 21:14:15 2AAC6C20 s camd35: disabled
2012/01/15 21:14:15 2AAC6C20 s cs378x: disabled
2012/01/15 21:14:15 2AAC6C20 s newcamd: initialized (fd=8, port=15000, crypted)
2012/01/15 21:14:15 2AAC6C20 s CAID: 1833
2012/01/15 21:14:15 2AAC6C20 s provid #0: 000000
2012/01/15 21:14:15 2AAC6C20 s newcamd: initialized (fd=9, port=15001, crypted)
2012/01/15 21:14:15 2AAC6C20 s CAID: 1702
2012/01/15 21:14:15 2AAC6C20 s provid #0: 000000
2012/01/15 21:14:15 2AAC6C20 s cccam: initialized (fd=10, port=25000, crypted)
2012/01/15 21:14:15 2AAC6C20 s radegast: disabled
2012/01/15 21:14:15 2AAC6C20 s http thread started
2012/01/15 21:14:15 2AAC6C20 s creating thread for device /dev/ttyUSB0
2012/01/15 21:14:15 2AAC6C20 s creating thread for device /dev/sci0
2012/01/15 21:14:15 2AAC6C20 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/01/15 21:14:15 2AAC6C20 s waiting for local card init
2012/01/15 21:14:15 2B19F4B0 h HTTP Server listening on port 83
2012/01/15 21:14:15 2B29F4B0 r reader thread started (thread=2B29F4B0, label=sky, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2012/01/15 21:14:15 2B39F4B0 r reader thread started (thread=2B39F4B0, label=
hdplus, device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2012/01/15 21:14:16 2B39F4B0 r
hdplus card detected
2012/01/15 21:14:17 2B39F4B0 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/01/15 21:14:18 2B29F4B0 r sky card detected
2012/01/15 21:14:18 2B39F4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2012/01/15 21:14:19 2B39F4B0 r detect native nagra card
2012/01/15 21:14:20 2B39F4B0 r [nagra-reader] type: NAGRA, caid: 1830, IRD ID: FF FF FF FF
2012/01/15 21:14:20 2B39F4B0 r [nagra-reader] ProviderID: 00 00 34 11
2012/01/15 21:14:20 2B39F4B0 r [nagra-reader] active to: 2012/03/07 11:59
2012/01/15 21:14:20 2B39F4B0 r -----------------------------------------
2012/01/15 21:14:20 2B39F4B0 r |id |tier |valid from |valid to |
2012/01/15 21:14:20 2B39F4B0 r +----+--------+------------+------------+
2012/01/15 21:14:20 2B39F4B0 r |8011|0064 |2011/12/05 |2012/12/05 |
2012/01/15 21:14:20 2B39F4B0 r |8011|0065 |1992/01/01 |1993/01/01 |
2012/01/15 21:14:20 2B39F4B0 r -----------------------------------------
2012/01/15 21:14:20 2B39F4B0 r found cardsystem nagra
2012/01/15 21:14:20 2B39F4B0 r ROM: D N A S P 1 4 2
2012/01/15 21:14:20 2B39F4B0 r REV: R e v G C 6
2012/01/15 21:14:20 2B39F4B0 r SER: XXXXXX
2012/01/15 21:14:20 2B39F4B0 r CAID: 1830
2012/01/15 21:14:20 2B39F4B0 r Prv.ID: 00 00 34 11 (sysid)
2012/01/15 21:14:20 2B39F4B0 r Prv.ID: 00 00 00 00
2012/01/15 21:14:20 2B39F4B0 r Prv.ID: 00 00 80 11
2012/01/15 21:14:20 2B39F4B0 r [nagra-reader] ready for requests
2012/01/15 21:14:23 2B29F4B0 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2012/01/15 21:14:24 2B29F4B0 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2012/01/15 21:14:25 2B29F4B0 r detect irdeto tunneled nagra card
2012/01/15 21:14:25 2B29F4B0 r no rsa key configured -> using irdeto mode
2012/01/15 21:14:25 2B29F4B0 r detect irdeto card
2012/01/15 21:14:29 2B29F4B0 r card system not supported
2012/01/15 21:14:29 2B29F4B0 r Normal mode failed, reverting to Deprecated Mode
Switch Debug from 0 to 0 1 2 4 8 16 32 64 128