Xtrend 4000 massives Ruckeln, schlechter Empfang bei HD+

[akopalueze]

AW: Xtrend 4000 massives Ruckeln, schlechter Empfang bei HD+

Was für Karten sind denn im Server und läuft da auch cccam oder oscam?

 

[fabsch]

AW: Xtrend 4000 massives Ruckeln, schlechter Empfang bei HD+

Halloakopalueze
es sind hd+ und sky abo noch über easymouse angeschlossen,sie funktionieren auch.
Nur die orf karte leider nicht.Am server ist
[h=2]OSCAM 1.20-unstable_svn build #8111[/h]und da läuft auch cccam.

 

[akopalueze]

AW: Xtrend 4000 massives Ruckeln, schlechter Empfang bei HD+

Meinte eigentlich S02,v13 oder v14?
Aber egal, wenn die Karten über oscam ausgelesen werden würde ich das über die Services statt mit ner prio regeln.

Die ORF Sender also über die Services für die Caid 1702 sperren.

Insgesamt sollte man für alle Kanäle Services anlegen und den usern bzw readern zuweisen , da der server dadurch wesentlich effektiver ist.

Mehr kann ich dir ohne genauere Angaben und configs leider nicht sagen.

 

[fabsch]

AW: Xtrend 4000 massives Ruckeln, schlechter Empfang bei HD+

Hallo akopalueze
benutze eine S02 und eine Hd+ weise karte,beide funktionieren.
nur die C8xxxxx Orf ice funktioniert nicht.
leider keine ahnung wie ich das mit Services machen muß.die configs lese ich nachher un

 

[fabsch]

AW: Xtrend 4000 massives Ruckeln, schlechter Empfang bei HD+

Hallo akopalueze

das ist der log ,hoffe der hilft denn fehler zu finden.

Spoiler

2013/10/08 05:30:31 94CA410 r orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2013/10/08 05:30:31 94CA410 r orf [mouse] Setting baudrate to 32258 bps
2013/10/08 05:30:31 94CA410 r orf [mouse] Calculated work ETU is 31.00 us
2013/10/08 05:30:31 94CA410 r orf [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 6.00 Mhz (specified in reader->mhz)
2013/10/08 05:30:32 94CA410 r orf [mouse] Hist. Bytes: TÄ_
2013/10/08 05:30:32 94CA410 r orf [mouse] detect irdeto card
2013/10/08 05:30:33 94CA410 r orf [mouse] card detected
2013/10/08 05:30:33 94CA410 r orf [mouse] type: CryptoWorks
2013/10/08 05:30:34 94CA410 r orf [mouse] card system not supported
2013/10/08 05:30:34 94CA410 r orf [mouse] Normal mode failed, reverting to Deprecated Mode
2013/10/08 05:30:35 94CA410 r orf [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2013/10/08 05:30:35 94CA410 r orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2013/10/08 05:30:35 94CA410 r orf [mouse] Calculated work ETU is 62.00 us
2013/10/08 05:30:35 94CA410 r orf [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 6.00 Mhz (specified in reader->mhz)
2013/10/08 05:30:36 94CA410 r orf [mouse] Hist. Bytes: TÄ_
2013/10/08 05:30:36 94CA410 r orf [mouse] detect irdeto card
2013/10/08 05:30:36 94CA410 r orf [mouse] caid: 0648, acs: 6.08, country code: AUT
2013/10/08 05:30:36 94CA410 r orf [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2013/10/08 05:30:37 94CA410 r orf [mouse] active providers: 4 (d3d7ff,001600,001700,001800)
2013/10/08 05:30:37 94CA410 r orf [mouse] found card system irdeto
2013/10/08 05:30:37 94CA410 r orf [irdeto] entitlements for provider: 1, id: D3D7FF
2013/10/08 05:30:37 94CA410 r orf [irdeto] chid: F000, date: 2010/08/23 - 2010/09/22
2013/10/08 05:30:37 94CA410 r orf [irdeto] chid: 000D, date: 2010/08/23 - 2010/09/22
2013/10/08 05:30:37 94CA410 r orf [irdeto] chid: 0002, date: 2011/05/10 - 2012/01/15
2013/10/08 05:30:37 94CA410 r orf [irdeto] chid: 0001, date: 2011/03/29 - 2011/12/04
2013/10/08 05:30:37 94CA410 r orf [irdeto] chid: FFD8, date: 2011/04/20 - 2011/06/19
2013/10/08 05:30:38 94CA410 r orf [irdeto] ready for requests
2013/10/08 05:30:40 9502DE8 c heimo2 (1702&000000/0000/32D4/93:00000000000000000000000000000000): invalid (100 ms) (0/0/0/0) - ATV+ (invalid SID)
2013/10/08 05:30:40 9502DE8 c heimo2 (1702&000000/0000/32D4/93:00000000000000000000000000000000): invalid (101 ms) (0/0/0/0) - ATV+ (invalid SID
2013/10/08 05:30:45 9502DE8 c heimo2 (1702&000000/0000/32D4/93:00000000000000000000000000000000): invalid (100 ms) (0/0/0/0) - ATV+ (invalid SID)

Spoiler

OSCam cardserver log switched at Tue Oct 8 053208 2013
-------------------------------------------------------------------------------

20131008 053208 0 OSCam cardserver log switched, version 1.20-unstable_svn, build #8111 (i486-linux-gnu)
20131008 053208 0 version=1.20-unstable_svn, build #8111, system=i486-linux-gnu, nice=-1
20131008 053208 0 client max. idle=120 sec, debug level=0, filter_sensitive=1
20131008 053208 0 max. logsize=2480 Kb, loghistorysize=4096 bytes
20131008 053208 0 client timeout=5000 ms, fallback timeout=2500 ms, cache delay=100 ms

20131008 053216 9502DE8 c heimo2 (1702&000000000032D49300000000000000000000000000000000) invalid (101 ms) (0000) - ATV+ (invalid SID)
20131008 053216 9502DE8 c heimo2 (1702&000000000032D49300000000000000000000000000000000) invalid (100 ms) (0000) - ATV+ (invalid SID)

20131008 053227 9502DE8 c heimo2 (1702&000000000032D49300000000000000000000000000000000) invalid (100 ms) (0000) - ATV+ (invalid SID)
20131008 053229 0 --- Skipped 1 duplicated log lines ---

20131008 053240 9502DE8 c heimo2 (1702&000000000032D49300000000000000000000000000000000) invalid (100 ms) (0000) - ATV+ (invalid SID)
20131008 053245 0 --- Skipped 1 duplicated log lines ---

20131008 053245 9502DE8 c heimo2 (1702&000000000032D49300000000000000000000000000000000) invalid (100 ms) (0000) - ATV+ (invalid SID)

 

[akopalueze]

AW: Xtrend 4000 massives Ruckeln, schlechter Empfang bei HD+

Dann kannst du jetzt entweder deine prio auf dem receiver anpassen.

P: 0648
P: 1830
P: 1702
I: 0

Ich hoffe das ist richtig so.

Besser ist aber dein oscam mal richtig einzustellen.
Das heißt die Caid für die reader richtig einstellen und Services anlegen und den readern sowie den usern zuweisen.

Gibt es hier im board zahlreiche Anleitungen zu im oscam Bereich....

Und für eine genauere Diagnose braucht man die configs...
D. H. Oscam.config, oscam.Server...

 

[fabsch]

AW: Xtrend 4000 massives Ruckeln, schlechter Empfang bei HD+

Hallo akopalueze

hier sind die

oscam.user

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8111
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = andreas
pwd = xxxxx
caid = 1702,1833,0648,1830
uniq = 3
sleep = 0
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

[account]
user = heimo1
pwd = xxxxxx
caid = 1702,1833,0648,1830
uniq = 3
sleep = 0
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

[account]
user = kaisy
pwd = xxxxx
caid = 1702,1833,0648,1830
uniq = 3
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

[account]
user = audrey
pwd = xxxxxx
caid = 1702,1833,0648,1830
uniq = 3
sleep = 0
au = local_sky1702,hd+,orf
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

[account]
user = frank
pwd = xxxxx
caid = 1702,1833,0648,1830
uniq = 3
sleep = 0
allowedprotocols = newcamd
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

[account]
user = kirseb
pwd = xxxxx
caid = 1702,1833,0648,1830
sleep = 0
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1
cccreshare = 1

[account]
user = anita
pwd = xxxxx
caid = 1702,1833,0648,1830
uniq = 3
sleep = 0
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

[account]
user = andy
pwd = xxxxxx
caid = 1702,1833,0648,1830
uniq = 3
au = 1
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

[account]
user = heimo2
pwd = xxxxx
caid = 1702,1833,0648,1830
uniq = 3
sleep = 0
au = local_sky1702,hd+,orf
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

oscam.server

Spoiler

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8111
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = hd+
protocol = mouse
device = /dev/ttyUSB2
services = hd+
caid = 1830
rsakey = BFxxxxxxxxxxxxxxxxxxxxxxxxxxDD5
boxkey = A7xxxxxxxxxx
ecmwhitelist = 1830:92
detect = cd
mhz = 600
cardmhz = 357
group = 2
emmcache = 1,3,2
blockemm-unknown = 1

[reader]
label = camd3emu
enable = 0
protocol = camd35
device = xxxxxxxx,xxxxx
user = meinserver
password = meinxxxxxxxxx
services = orf
caid = 0D05
group = 2

[reader]
label = local_sky1702
protocol = mouse
device = /dev/ttyUSB0
services = skyall
caid = 1702,1833
boxkey = 1122xxxxxxxxxxx
detect = cd
mhz = 600
cardmhz = 600
group = 3
emmcache = 1,3,2

[reader]
label = kirseb
protocol = cccam
device = greatstxxxxxxxxx
user = fabsch
password = xxxxxxxxx
caid = 1830,1702,1833
group = 3
cccversion = 2.2.1
cccmaxhops = 1
cccmindown = 1
ccckeepalive = 1
cccreshare = 1

[reader]
label = orf
protocol = mouse
device = /dev/ttyUSB1
services = orf
caid = 0648
boxid = 12345678
rsakey = DF5 xxxxxxxxxxxxxxxxxxxxxxxxx12D
force_irdeto = 1
boxkey = 11xxxxxxxxxxxxxxxx
detect = cd
mhz = 600
cardmhz = 600
group = 1

oscam.services

Spoiler

Spoiler

[skyall]
caid = 1702,1833,09C4
provid = 000000
srvid = 000C,000D,000E,0010,0013,0015,0016,0017,0018,001A,001B,001C,001D,0022,0024,002A,0032,0034,00A8,0206,0070,0071,0082,0084,007C,0076,0074,6FB8,007B,007D,007E,007F,0080,0065,6FB9,0021,0023,0025,0026,0038,003A,0027,2EFE,0039,4462,7001,700A,125D,1485,006A,006B,006F,0083,006E,0073,0008,0009,000A,000B,0014,0019,0029,002B,0203,0204,006C,0081,0072,010C,0116,0120,012A,0134,013E,0148,0152,0102,007A,0077,006D,010E,0118,0122,012C,0136,0140,014A,0154,0104,013F,00F2,0011,001E,00DD,00DE,0107,0111,011B,0125,012F,0139,0143,014D,00FD,0069,010B,0115,0066,00DF,0106,0110,011A,0124,012E,0138,0142,014C,00FC

[orf]
caid = 0648
provid = 000000
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33AC,33A7,33A5,332D

[hd+]
caid = 1830,1843,1860
provid = 000000,003411,008011
srvid = 277E,EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,5273,5274,1519,2E9B,151A,157F

oscam.config

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8111
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
serverip = 192.168.xxxxxx
logfile = /var/log/ipc/OScam.log
cachedelay = 100
netprio = 1
unlockparental = 1
nice = -1
maxlogsize = 2480
preferlocalcards = 1
dropdups = 1
lb_save = 500
lb_reopen_mode = 1
lb_savepath = /var/log/loadb.log
resolvegethostbyname = 1
failbantime = 15
failbancount = 5

[newcamd]
port = xxxx@1702:000000;xxxxxx@1833:000000;xxxxx@0D05:000004,000000,000008,000010
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = xxxxxx
nodeid = 5A9BDCE31044153C
version = 2.2.1
reshare = 1

[webif]
httpport = xxxx
httpuser = xxxx
httppwd = xxxxx
httphelplang = de
httprefresh = 15
httpallowed = 127.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
appendchaninfo = 1

hoffe du kannst mir weiterhelfen.