Wechsel von VU Solo2 zu VU Uno 4K Se

[Webnaldo]

Hallo,
ich hatte die ganze Zeit auf meiner VU Solo 2 Oscam am laufen, bei meinem Vater und Sohn lief auf der VU Uno Cccam (HD+Karte ). Nun habe ich etwas aufgerüstet und mir eine VU Uno 4K SE zugelegt. Dort habe ich nun einfach die Oscam hinterlegt, doch leider wird bei den Clients nichts mehr hell. Irgendwie kommen sie nicht zu mir durch.
Das Oscam zeigt mir aber zumindest mal an damit die Karte gelesen wird (dev/sci0).
Kann mir jemand helfen damit es wieder läuft

Spoiler: Logfile

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Dec 20 14:50:43 2018
-------------------------------------------------------------------------------
2018/12/20 14:50:43 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11431 (arm-oe-linux-gnueabi)
2018/12/20 14:50:43 00000000 s (main) System name = Linux
2018/12/20 14:50:43 00000000 s (main) Host name = vuuno4kse
2018/12/20 14:50:43 00000000 s (main) Release = 4.1.20-1.9
2018/12/20 14:50:43 00000000 s (main) Version = #1 SMP Tue Nov 13 20:49:43 CET 2018
2018/12/20 14:50:43 00000000 s (main) Machine = armv7l
2018/12/20 14:50:43 00000000 s (main) Stb model = dm8000
2018/12/20 14:50:43 00000000 s (main) Stb vumodel = vuuno4kse
2018/12/20 14:50:43 00000000 s (main) Stb boxtype = vuuno4kse
2018/12/20 14:50:43 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 4012
2018/12/20 14:50:43 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2018/12/20 14:50:43 00000000 s (config) userdb reloaded: 10 accounts loaded, 0 expired, 0 disabled
2018/12/20 14:50:43 00000000 s (main) signal handling initialized
2018/12/20 14:50:43 00000000 s (config) 28 service-id's loaded in 0 ms
2018/12/20 14:50:43 00000000 s (net) cccam: initialized (fd=5, port=xxxxx, prio=1 [ SO_PRIORITY IP_TOS ])
2018/12/20 14:50:43 00000000 s (reader) HDPlus [internal] creating thread for device /dev/sci0
2018/12/20 14:50:43 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/12/20 14:50:43 00000000 s (main) waiting for local card init
2018/12/20 14:50:43 7BABECE6 r (reader) HDPlus [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2018/12/20 14:50:43 7BABECE6 r (reader) HDPlus [internal] Reader sci internal, detected box type: vuuno4kse
2018/12/20 14:50:43 000C233A h (webif) webif: decompressed 177583 bytes back into 437728 bytes
2018/12/20 14:50:43 000C233A h (webif) HTTP Server running. ip=0.0.0.0 port=xxxxx
2018/12/20 14:50:44 7BABECE6 r (reader) HDPlus [internal] card detected
2018/12/20 14:50:45 7BABECE6 r (reader) HDPlus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 xx xx xx xx xx xx
2018/12/20 14:50:45 7BABECE6 r (reader) HDPlus [internal] HD-Plus 01 recognized
2018/12/20 14:50:48 7BABECE6 r (reader) HDPlus [internal] Buffers readed 0 bytes total time_us 3099754
2018/12/20 14:50:49 7BABECE6 r (reader) HDPlus [internal] detect native nagra card
2018/12/20 14:50:50 7BABECE6 r (reader) HDPlus [internal] ready for requests
2018/12/20 14:50:50 7BABECE6 r (reader) HDPlus [internal] found card system nagra
2018/12/20 14:50:50 7BABECE6 r (reader) HDPlus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/12/20 14:50:50 7BABECE6 r (reader) HDPlus [nagra] ROM: D N A S P 1 4 2
2018/12/20 14:50:50 7BABECE6 r (reader) HDPlus [nagra] REV: R e v G C 6
2018/12/20 14:50:50 7BABECE6 r (reader) HDPlus [nagra] SER: ############
2018/12/20 14:50:50 7BABECE6 r (reader) HDPlus [nagra] CAID: 1830
2018/12/20 14:50:50 7BABECE6 r (reader) HDPlus [nagra] Prv.ID: 00 00 34 11 (sysid)
2018/12/20 14:50:50 7BABECE6 r (reader) HDPlus [nagra] Prv.ID: 00 00 00 00
2018/12/20 14:50:50 7BABECE6 r (reader) HDPlus [nagra] IRD ID: ############
2018/12/20 14:50:50 7BABECE6 r (reader) HDPlus [nagra] active to: 2019/02/10 11:59
2018/12/20 14:50:50 7BABECE6 r (reader) HDPlus [nagra] -----------------------------------------
2018/12/20 14:50:50 7BABECE6 r (reader) HDPlus [nagra] |id |tier |valid from |valid to |
2018/12/20 14:50:50 7BABECE6 r (reader) HDPlus [nagra] +----+--------+------------+------------+
2018/12/20 14:50:50 7BABECE6 r (reader) HDPlus [nagra] |8011|0064 |2010/01/10 |2011/01/11 |
2018/12/20 14:50:51 7BABECE6 r (reader) HDPlus [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2018/12/20 14:50:51 7BABECE6 r (reader) HDPlus [nagra] |8011|0BEA |2011/01/11 |2015/02/13 |
2018/12/20 14:50:51 7BABECE6 r (reader) HDPlus [nagra] |8011|0BB8 |2015/02/27 |2019/02/07 |
2018/12/20 14:50:51 7BABECE6 r (reader) HDPlus [nagra] |8011|0FA0 |2017/09/04 |2019/02/07 |
2018/12/20 14:50:51 7BABECE6 r (reader) HDPlus [nagra] -----------------------------------------
2018/12/20 14:50:51 00000000 s (main) init for all local cards done
2018/12/20 14:50:51 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2018/12/20 14:50:51 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2018/12/20 14:50:51 00000000 s (anticasc) anti cascading disabled
2018/12/20 14:50:51 6ED48AAB c (client) plain dvbapi-client granted (webnaldo, au=auto (1 reader))
2018/12/20 14:50:51 6ED48AAB c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache

 

[cojo]

ohne alle configs schwer

 

[Webnaldo]

Spoiler: Oscam Server

[reader]

label = HDPlus
enable = 1
protocol = internal
device = /dev/sci0
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5Cxxxxxx
boxkey = A7642F57BC96Dxxx
caid = 1830
services = HDPlus
detect = CD
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,1,2

Spoiler: Oscam Config

[global]
netprio=1
logfile = /tmp/oscam.log
maxlogsize = 1500
cachedelay = 120
nice = -1
preferlocalcards = 1
dropdups = 1


[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = xxxx


[cccam]
port = xxxxx
reshare = 1
version = 2.3.0
keepconnected = 1
stealth = 1


[monitor]
appendchaninfo = 1


[webif]
httpport = xxxxx
httphelplang = de
httpuser = kouxxx
httppwd = pfvxxx
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = xx2m3.selfhost.eu

Spoiler: Oscam Services

[HDPlus]
caid = 1830
srvid = 1EF10,EF11,EF14,1581,EF15,EF74,EF75,EF76,EF77,5273,5274,1519,277E,2E9B,151A,157F,EF78,157C,2774,2EAF,2777,30D7

Spoiler: Oscam User

[account]
user = xxx
enable = 1
group = 1,2
au = 1
caid = 1830
services = HDPlus
uniq = 3

[account]
user = xxx
pwd = 9529
group = 1,2
caid = 1830
services = HDPlus
uniq = 3

 

[datamen]

@Webnaldo ..... Kann es sein das deine neue Vu Uno4k eine neue IP Adresse von deinem Router bekommen hat ??!! .... und dadurch die Portweiterleitung im Router nicht mehr stimmt ?? :happy:

 

[Webnaldo]

Manchmal ist die Lösung so einfach.
Die Portweiterleitung war der Fehler.
Tausend Dank für die wie immer Turboschnelle Hilfe an das beste Board der Welt.
Frohe Weihnachten an Alle und einen Guten Rutsch.