Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen)

Status
Für weitere Antworten geschlossen.
AW: VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen

Solo mini ist auch ein Clone des Cloud ibox! Dort wurde der sog. Security chip nicht verbaut.... Falls ich mich irre so bitte ich um Korrektur.....

Habe ja selber auch die Solo pro.... Und diese ist auch tot.... Auf Nachfrage des Lieferanten wurde mir gesagt dass die Fabrik von Cloud ibox schon länger dicht gemacht hätte und alle Modelle nach der Cloud ibox nur Clones dieser wären.

Gesendet von meinem GT-I9505 mit Tapatalk
 
AW: VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen

Wer von euch hat denn nun Chips bestellt und würde mir einen verkaufen? Löten ist bei mir kein Problem
 
AW: VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen

Ich bekomme welche. Wenn welche über sind kein Problem.
 
AW: VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen

Ich habe 3 bestellt, brauche 2... Wenn einer über ist dann kann ich ihn abgeben.
 
AW: VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen

Das Problem ist mit dem TSOP ist es nicht getan der ist quasi nur um an die Pins ohne auslöten zu kommen... man braucht noch nen Programmer der den
Samsung K9F2G08U0C unterstützt. Der zb. unterstützt den: Chipprog48 und kann quasi kopieren:
Sie müssen registriert sein, um Links zu sehen.

oder in deutsch:
Sie müssen registriert sein, um Links zu sehen.
kostet aber so + - 500 euro




[h=1][/h]

Hellraiser1 schrieb:
der kann
Sie müssen registriert sein, um Links zu sehen.
für 27€ in frankreich bestellt werden.

evt. auch bei ebay die sehen aber anders aus
Sie müssen registriert sein, um Links zu sehen.


gruß
Hellraiser1
Zum Vergrößern anklicken....
 
AW: VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen

Dann lassen wir doch bei der Firma, den Chip für uns kopieren, sowie ich das verstanden habe, kostet für 10 Stück 15 Euro.

[TABLE="width: 100%"]
[TR]
[TD="colspan: 2"]
Unser Programmierservice für elektronische Bauteile​
[/TD]
[/TR]
[TR]
[TD="width: 566"]Speziell für Kleinmengen bieten wir unseren Programmierservice an:

  • Wir programmieren Ihre Bausteine wie EPROMs, EEPROMs, Flash, GALs, PALs,
    FPGAs, Microcontroller und Flash-Controller in allen gängigen Gehäuseformen wie
    DIP, PLCC, SOP, TSOP usw.
  • Die zu programmierenden Daten senden Sie uns entweder per E-Mail, auf einem Datenträger (3,5”-, ZIP-Diskette, CD, USB-Stick, Speicherkarte) oder als Master-Baustein.
[/TD]
[TD="width: 230"]
Du musst angemeldet sein, um Bilder zu sehen.
[/TD]
[/TR]
[TR]
[TD="colspan: 2"]
  • Die Markierung der Bausteine erfolgt auf Wunsch wahlweise durch Farbpunkt, Etiketten mit frei wählbarem Text oder
    mit Ihren eigenen Labels.
  • Unsere Programmiergeräte sind stets auf dem aktuellsten technischen Stand und verwenden ausschliesslich die von
    den Herstellern freigegebenen Programmieralgorithmen.
Kleinmengen bis zu 10 Stück werden zu einem Pauschalpreis von 15 Euro inkl. Mwst. zzgl. Versand berechnet (Zahlung per Vorkasse).
Diese Pauschale gilt für Bausteine im DIL- oder PLCC-Gehäuse (bis 44 Pin), Preise für andere Gehäuseformen auf Anfrage.

[/TD]
[/TR]
[/TABLE]

Beste Grüsse
reini12
 
AW: VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen

Es steht aber auch "bis 44 Pin"! Auf jeden Fall, falls wir über eine Sammelbestellung reden- bin ich dabei. Löten, nach eine Anleitung,
ist ja zubewerkstelligen meiner Seit's.
 
AW: VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen

Denke das mit dem Löten, wird für den einen oder anderen nicht zu bewältigen sein, erlich gesagt sehe ich da für die Mehrheit ja fast schwarz. Aber es haben sich ja schon welche angeboten das evtl. zu übernehmen. Richtig geil wäre natürlich und das ist immer noch meine Traumvorstelung, das man einen solchen Progger auf den Tisch legt, einen neuen Chip drauf legt und dann direkt über das Board in den alten rein kopiert. Leider denke ich das das ein traum bleiben wird. Ich meine egal wenn so ein Teil 500 taken kosten würde und sich genügend daran beteiligen würden den anzuschaffen, wäre das ja auch kein Thema.

Beste Grüsse
reini12
 
AW: VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen

xosajin schrieb:
Es steht aber auch "bis 44 Pin"!
...
Zum Vergrößern anklicken....

Aber nur im einfach kontaktierbaren PLCC-Gehäuse und nicht im TSOP-Gehäuse.

In Deutschland programmiert Segor-Electronic in Berlin Flash-Chips, wenn man ihne die zu programmierbaren Daten als Datei gibt oder einen schon programmierten Chip zum Kopieren.

- - - - - - - - - -


Bei den seriellen SPI Flash-Chips geht das so sogar, aber eben nicht bei den parallelen NOR oder NAND Flash-Chips, leider. Die muss man schon auslöten, programmieren und wider einlöten (können).
 
AW: VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen

smd löten: siehe post #2693
 
AW: VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen

Danke Daggi Duck für die technische Aufklärung. Also ist es eigentlich Sinnfrei, sich damit zu beschäftigen, dass man den Chip, jemals im eingebauten Zustand wieder beschreiben kann. Habe ich das so richtig verstanden? Du bist doch voll der Spezi in solchen Elektronik Angelegenheiten oder? Vielleicht kannst du uns auch noch mehr aufklären über die technische Seite. Da mir das wissen in Micro-Elektronik fehlt, ist es für mich unbegreiflich das man nicht an den Chip heran kommt. Gut was ich bereits weis ist, das es wohl der knackpunkt ist, dass niemand das Broadcom Studio mit Chip Unterstützung hat.

Beste Grüsse
reini12
 
AW: VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen

Wo war Crashlog von Timebomb,finde ich nicht mehr
 
AW: VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen

Hier mal die ersten beiden Crashlogs von meiner Box:

Code: 
<?xml version="1.0" encoding="utf-8"?>
<stbcrashlog>
    <dvbapp2>
        <crashdate>Sat Apr 19 02:53:23 2014</crashdate>
        <compiledate>Apr 18 2014</compiledate>
        <skin>AtileHD/skin.xml</skin>
        <sourcedate>2014-04-18</sourcedate>
        <branch>vti-master</branch>
    </dvbapp2>
    <image>
        <stbmodel>solo2</stbmodel>
        <kernelcmdline>ubiroot rootflags=sync bmem=192M@64M bmem=256M@512M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs</kernelcmdline>
        <nimsockets>NIM Socket 0:</nimsockets>
        <vtiversion>6.0.7</vtiversion>
        <imageversion>
            <!-- Invalid argument -->
        </imageversion>
    </image>
    <software>
        <dvbapp2software>
            <![CDATA[
]]>
        </dvbapp2software>
        <gstreamersoftware>
            <![CDATA[
]]>
        </gstreamersoftware>
    </software>
    <crashlogs>
        <dvbapp2crashlog>
            <![CDATA[
eDVBCAService] send 62 bytes
9f 80 32 3a 03 00 89 0f 00 25 01 81 08 00 c0 00 00 00 08 00 85 82 02 01 00 84 02 00 63 09 04 18 33 f8 89 09 04 09 c4 fb 89 09 04 09 8c fa 89 06 00 20 00 00 1b 03 ff 00 00 06 04 03 00 00 
doing version filtering
0063:  02 00 89 0f 00 00
mask:  ff ff ff 3f 00 00
mode:  00 00 00 3e 00 00
[SEC] set dynamic current limiting
-+ 1/2 TID 4e
sdt update done!
[AutoRes] determineContent
++ 2/2 TID 4e
done!
doing version filtering
0012:  4e 00 89 35 00 00
mask:  ff ff ff 3f 00 00
mode:  00 00 00 3e 00 00
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoSizeChanged
VIDEO_GET_EVENT - ok
[AutoRes] got event evFramerateChanged
[AutoRes] determineContent
[EPGC] start caching events(1397864884)
child has terminated
pipes closed
[AutoMount.py] CheckMountPointFinished
[AutoMount.py] result mount: mounting //192.168.2.106/Harddisk on /media/net/VUDUO2 failed: No route to host

[AutoMount.py] retval 255
LEN 0
PATH im CheckMountPointFinished /media/net/VUDUO2
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[EPGC] nownext finished(1397864891)
no ancillary data in audio stream... abort radiotext pes parser
child has terminated
pipes closed
next real activation is Sat Apr 19 04:00:01 2014
[EPGC] schedule finished(1397864981)
[EPGC] stop caching events(1397864981)
[EPGC] next update in 60 min
action ->  InfobarChannelSelection switchChannelUp
accel 8704 bytes
accel memstat: used=12 kB, free 4036 kB, s 12 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
action ->  OkCancelActions ok
playing service..
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:89:8:85:C00000:0:0:0:
[eDVBCAService] free service 1:0:19:89:8:85:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
not pauseable.
RemovePopup, id = ZapError
[eDVBCAService] remove channel 0x28de178
[eDVBLocalTimerHandler] remove channel 0x28de178
[eEPGCache] remove channel 0x28de178
allocate channel.. 0006:0085
[eDVBCAService] new channel 0x28de0e0!
(1)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11914500 Pol 0 SR 27500000 INV 2 FEC 9 orbpos 192 system 1 modulation 1 pilot 2, rolloff 0
tuning to 1314 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:83:6:85:C00000:0:0:0:
allocate demux
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
[SEC] set static current limiting
[SEC] invalidate current switch params
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 1
[SEC] sleep 500ms
(1)fe event: status 0, inversion off, m_tuning 1
(1)fe event: status 7, inversion off, m_tuning 2
(1)fe event: status 1f, inversion off, m_tuning 3
OURSTATE: ok
[eDVBCAService] channel 0x28de0e0 running
[eDVBLocalTimerHandler] channel 0x28de0e0 running
no version filtering
0014:  70 00 00 00 00 00
mask:  fc 00 00 00 00 00
mode:  00 00 00 00 00 00
[eEPGCache] channel 0x28de0e0 running
stop release channel timer
[EPGC] next update in 2 sec
no version filtering
0012:  4e 00 83 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
ok ... now we start!!
no version filtering
0000:  00 00 00 00 00 00
mask:  ff 00 00 00 00 00
mode:  00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (04ff), and 1 audio stream(s) (0503), and the pcr pid is 04ff, and the text pid is 0020
allocate demux
disable teletext subtitles
decoder state: play, vpid=1279, apid=1283
DMX_SET_PES_FILTER(0x4ff) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x503) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x4ff) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x20) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
not pauseable.
Send OK!! : OP_HBBTV_UNLOAD_AIT
[AutoRes] service changed
+ 1/1 TID 00
done!
PATready
use pmtpid 0064 for service_id 0083
no version filtering
0064:  02 00 83 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
doing version filtering
0000:  00 00 00 19 00 00
mask:  ff 00 00 3f 00 00
mode:  00 00 00 3e 00 00
+ 1/1 TID 02
done!
eventNewProgramInfo 0 0
have 1 video stream(s) (04ff), and 2 audio stream(s) (0503, 0504), and the pcr pid is 04ff, and the text pid is 0020
decoder state: play, vpid=1279, apid=1283
Send OK!! : OP_HBBTV_UNLOAD_AIT
[eDVBCAService] new service 1:0:19:83:6:85:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:83:6:85:C00000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 0 mask 01 prevhash 00000000
[eDVBCAService] send 73 bytes
9f 80 32 45 03 00 83 17 00 2b 01 81 08 00 c0 00 00 00 06 00 85 82 02 01 00 84 02 00 64 09 04 18 33 f8 b6 09 04 09 c4 fb b6 09 04 09 af ff b6 09 04 09 8c fa b6 06 00 20 00 00 1b 04 ff 00 00 06 05 03 00 00 06 05 04 00 00 
doing version filtering
0064:  02 00 83 17 00 00
mask:  ff ff ff 3f 00 00
mode:  00 00 00 3e 00 00
[SEC] set dynamic current limiting
+- 1/2 TID 4e
[AutoRes] determineContent
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
sdt update done!
++ 2/2 TID 4e
done!
doing version filtering
0012:  4e 00 83 33 00 00
mask:  ff ff ff 3f 00 00
mode:  00 00 00 3e 00 00
[EPGC] start caching events(1397865020)
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[EPGC] nownext finished(1397865027)
[EPGC] schedule finished(1397865037)
[EPGC] stop caching events(1397865037)
[EPGC] next update in 60 min
no ancillary data in audio stream... abort radiotext pes parser
action ->  GlobalActions volumeUp
Setvolume: 25 25 (raw)
Setvolume: 48 48 (-1db)
setValue 25
action ->  GlobalActions volumeUp
Setvolume: 30 30 (raw)
Setvolume: 45 45 (-1db)
setValue 30
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
action ->  GlobalActions volumeUp
Setvolume: 35 35 (raw)
Setvolume: 41 41 (-1db)
setValue 35
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
no version filtering
0014:  70 00 00 00 00 00
mask:  fc 00 00 00 00 00
mode:  00 00 00 00 00 00
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
no version filtering
0014:  70 00 00 00 00 00
mask:  fc 00 00 00 00 00
mode:  00 00 00 00 00 00
[eDVBLocalTimerHandler] diff is -1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] difference between linux time and RTC time is < 60 sec... so the transponder time looks ok
[eDVBLocalTimerHandler] time update to 02:50:23
[eDVBLocalTimerHandler] m_time_difference is -1
[eDVBLocalTimerHandler] set Linux Time
[EPGC] start caching events(1397868637)
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[EPGC] nownext finished(1397868644)
[EPGC] schedule finished(1397868647)
[EPGC] stop caching events(1397868647)
[EPGC] next update in 60 min
next real activation is Sat Apr 19 04:00:01 2014
next real activation is Sat Apr 19 04:00:01 2014
action ->  InfobarEPGActions showEventInfo
action ->  OkCancelActions cancel
action ->  InfobarChannelSelection switchChannelDown
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
action ->  OkCancelActions ok
playing service..
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:83:6:85:C00000:0:0:0:
[eDVBCAService] free service 1:0:19:83:6:85:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
accel 8704 bytes
accel memstat: used=24 kB, free 4024 kB, s 24 kB
accel memory: 0
not pauseable.
RemovePopup, id = ZapError
[eDVBCAService] remove channel 0x28de0e0
[eDVBLocalTimerHandler] remove channel 0x28de0e0
[eEPGCache] remove channel 0x28de0e0
allocate channel.. 043a:0001
[eDVBCAService] new channel 0x28de0e0!
(1)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12051000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1451 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:4E27:43A:1:C00000:0:0:0:
allocate demux
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 1
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 1
[SEC] sleep 500ms
(1)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
(1)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBCAService] channel 0x28de0e0 running
[eDVBLocalTimerHandler] channel 0x28de0e0 running
no version filtering
0014:  70 00 00 00 00 00
mask:  fc 00 00 00 00 00
mode:  00 00 00 00 00 00
[eEPGCache] channel 0x28de0e0 running
[EPGC] next update in 2 sec
stop release channel timer
no version filtering
0012:  4e 4e 27 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
ok ... now we start!!
no version filtering
0000:  00 00 00 00 00 00
mask:  ff 00 00 00 00 00
mode:  00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (06ff), and 1 audio stream(s) (0700), and the pcr pid is 06ff, and the text pid is 0027
allocate demux
disable teletext subtitles
decoder state: play, vpid=1791, apid=1792
DMX_SET_PES_FILTER(0x6ff) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x700) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x6ff) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x27) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
not pauseable.
Send OK!! : OP_HBBTV_UNLOAD_AIT
[AutoRes] service changed
+ 1/1 TID 00
done!
PATready
use pmtpid 0066 for service_id 4e27
no version filtering
0066:  02 4e 27 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
doing version filtering
0000:  00 00 00 27 00 00
mask:  ff 00 00 3f 00 00
mode:  00 00 00 3e 00 00
[eDVBLocalTimerHandler] diff is -1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 02:53:21
[eDVBLocalTimerHandler] m_time_difference is -1
[eDVBLocalTimerHandler] set Linux Time
+- 1/2 TID 4e
PC: 7794c6d0
 00000000 7fa2f2ab 023fee40 00000000
 023fee40 7fa2f316 00000001 00000001
 00000003 00000001 7784d3e0 7fa31014
 77388970 005dae00 77cd84a8 005d0000
 023fee40 00000001 7fa2f311 00000005
 7fa2f2a8 0000000a 023eecd0 7fa30480
 005cda20 7794c6d0 00000001 00000000
 77987190 7fa2f138 7fa30380 77953c3c
-------
[EPGC] start caching events(1397868802)
]]>
        </dvbapp2crashlog>
    </crashlogs>
</stbcrashlog>

Code: 
<?xml version="1.0" encoding="utf-8"?>
<stbcrashlog>
    <dvbapp2>
        <crashdate>Sat Apr 19 02:53:41 2014</crashdate>
        <compiledate>Apr 18 2014</compiledate>
        <skin>Default Skin</skin>
        <sourcedate>2014-04-18</sourcedate>
        <branch>vti-master</branch>
    </dvbapp2>
    <image>
        <stbmodel>solo2</stbmodel>
        <kernelcmdline>ubiroot rootflags=sync bmem=192M@64M bmem=256M@512M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs</kernelcmdline>
        <nimsockets>NIM Socket 0:</nimsockets>
        <vtiversion>6.0.7</vtiversion>
        <imageversion>
            <![CDATA[
version=1000201312241043
comment=vuplus
target=9
creator=VTi <info@vuplus-support.org>
url=http://www.vuplus-support.org/
catalog=http://www.vuplus-support.org
]]>
        </imageversion>
    </image>
    <software>
        <dvbapp2software>
            <![CDATA[
]]>
        </dvbapp2software>
        <gstreamersoftware>
            <![CDATA[
]]>
        </gstreamersoftware>
    </software>
    <crashlogs>
        <dvbapp2crashlog>
            <![CDATA[
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
12150k video mem
SetMode : wanted: 720x576x32, got 1280x720x32
 - double buffering available!
5670kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 5760)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x72ad80 8448 bytes, stride 132
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) Hdmi CEC driver
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
+ (21) input device driver
Input device "dreambox advanced remote control (native)" is not a keyboard.
Found 1 input devices!
+ (21) Console RC Driver
failed to open /dev/tty0
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- opening lame channel db
reading services (version 4)
loaded 1638 services
scanning for frontends..
opening frontend 0
detected satellite frontend
close frontend 0
opening frontend 1
detected satellite frontend
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 9 demux, boxtype 4
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
resolve: resolve ${datadir}/enigma2/skin_default/pal.png
resolve: -> /usr/share/enigma2/skin_default/pal.png
Loading spinners...
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait1.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait2.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait3.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait4.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait5.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait6.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait6.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait7.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait7.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait8.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait8.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait9.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait9.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait10.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait10.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait11.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait11.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait12.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait12.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait13.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait13.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait14.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait14.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait15.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait15.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait16.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait16.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait17.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait17.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait18.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait18.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait19.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait19.png
found 18 spinner!

setIoPrio best-effort level 3 ok
resolve: resolve ${libdir}/enigma2/python/mytest.py
resolve: -> /usr/lib/enigma2/python/mytest.py
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${datadir}/fonts/
resolve: -> /usr/share/fonts/
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${libdir}/enigma2/python/Plugins/
resolve: -> /usr/lib/enigma2/python/Plugins/
resolve: resolve ${datadir}/enigma2/po/
resolve: -> /usr/share/enigma2/po/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${sysconfdir}/enigma2/playlist/
resolve: -> /etc/enigma2/playlist/
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
resolve: resolve ${datadir}/enigma2/dealer
resolve: -> /usr/share/enigma2/dealer
resolve: resolve ${datadir}/meta
resolve: -> /usr/share/meta
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
enumerating block devices...
found block device 'loop0': blacklisted
found block device 'loop1': blacklisted
found block device 'loop2': blacklisted
found block device 'loop3': blacklisted
found block device 'loop4': blacklisted
found block device 'loop5': blacklisted
found block device 'loop6': blacklisted
found block device 'loop7': blacklisted
found block device 'sda': ok, removable=False, cdrom=False, partitions=['sda1']
new Harddisk sda -> /dev/sda -> /dev/sda
found block device 'sda1': error querying properties
found block device 'mtdblock0': blacklisted
found block device 'mtdblock1': blacklisted
found block device 'mtdblock2': blacklisted
found block device 'mtdblock3': blacklisted
found block device 'mtdblock4': blacklisted
not loading user skin:  [Errno 2] No such file or directory: '/etc/enigma2/skin_user.xml'
[VTi] loading user defined colors for skin AtileHD/skin_user_colors.xml
[VTi] loading user defined header file for skin AtileHD/skin_user_header.xml
[VTi] loading modular skin file :  AtileHD/mySkin/skin_ChannelSelection_ScrollEPG_NextEvents.xml
[VTi] loading modular skin file :  AtileHD/mySkin/skin_EPGSelection_ScrollEPG.xml
[VTi] loading modular skin file :  AtileHD/mySkin/skin_InfoBar_Weather.xml
[VTi] loading modular skin file :  AtileHD/mySkin/skin_Xtended_Plugin_Screens.xml
menu_mainmenu
Reading satellites.xml
resolve: resolve ${datadir}/enigma2/unicable.xml
resolve: -> /usr/share/enigma2/unicable.xml
removing internal link on frontend id 0
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7356 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes, DVB-T2 No
setSlotInfo for dvb frontend 1 to slotid 1, descr BCM7356 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes, DVB-T2 No
link tuner 0 to tuner 1
setting internal link on frontend id 0
slot: 0 configmode: loopthrough
slot: 1 configmode: simple
diseqcmode:  single
sec config completed
resolve: resolve ${datadir}/enigma2/setup.xml
resolve: -> /usr/share/enigma2/setup.xml
Preferred tag editor set to  None
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.dbe01.tv
62 entries in Bouquet userbouquet.dbe01.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.free_tv.tv
52 entries in Bouquet userbouquet.free_tv.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.bundesliga.tv
26 entries in Bouquet userbouquet.bundesliga.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.dbe00.tv
3 entries in Bouquet userbouquet.dbe00.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
0 entries in Bouquet userbouquet.favourites.tv
5 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
5 entries in Bouquet userbouquet.favourites.radio
1 entries in Bouquet bouquets.radio
[eDVBLocalTimeHandler] enable sync local time with transponder time!
add dreampackage scanner plugin
added
main thread is non-idle! display spinner!
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Display)
SetMode : wanted: 1280x720x32, got 720x576x32
 - double buffering available!
4050kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5760)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
[FONT] adding font /usr/share/enigma2/AtileHD/fonts/Roboto-Regular.ttf...OK (Regular)
[FONT] adding font /usr/share/enigma2/AtileHD/fonts/Roboto-Regular.ttf...OK (RegularLight)
[FONT] adding font /usr/share/enigma2/AtileHD/fonts/meteocons.ttf...OK (Meteo)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
[FONT] adding font /usr/share/enigma2/AtileHD/fonts/Roboto-Regular.ttf...OK (Regular)
[FONT] adding font /usr/share/enigma2/AtileHD/fonts/Roboto-Regular.ttf...OK (RegularLight)
[FONT] adding font /usr/share/enigma2/AtileHD/fonts/meteocons.ttf...OK (Meteo)
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
cannot open /proc/stb/avs/0/input_choices
--> setting scaler_sharpness to: 00000000
couldn't open /proc/stb/misc/12V_output
resolve: resolve ${datadir}/enigma2/keymap.xml
resolve: -> /usr/share/enigma2/keymap.xml
setLCDBrightness 25
setLCDBrightness 127
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
Activating keymap: Keyboard English
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
Activating language German
language set to de_DE
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
main thread is non-idle! display spinner!
Module 'mechanize' loaded
Twisted Agent in use (12, 0, 0)
remove DVI-PC because it does not exist.
hotplug on DVI
set Videomode DVI 1080p multi
set aspect, policy, policy2, wss 16:9 bestfit letterbox auto
Module 'ast' loaded
Module 'mechanize' loaded
resolve: resolve ${datadir}/enigma2/setup.xml
resolve: -> /usr/share/enigma2/setup.xml
resolve: resolve ${libdir}
resolve: -> /usr/lib
<ZappingModeSelection> set zapping mode : mute
resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/WirelessLan
resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> setting splitmode to: off
--> setting sharpness to: 00000000
--> setting auto_flesh to: 00000000
--> setting green_boost to: 00000000
--> setting blue_boost to: 00000000
--> setting dynamic_contrast to: 00000000
--> setting scaler_vertical_dejagging to: disable
--> setting smooth to: disable
--> applying pep values
[UIPositionSetup] write dst_left :  0
[UIPositionSetup] write dst_width :  720
[UIPositionSetup] write dst_top :  0
[UIPositionSetup] write dst_height :  576
[DeviceManager2] Loading skin  /usr/lib/enigma2/python/Plugins/SystemPlugins/DeviceManager2/skin.xml
CIFSMOUNT {'username': 'username', 'sharedir': 'Harddisk', 'sharename': 'VUDUO2', 'active': 'True', 'ip': '192.168.2.106', 'hdd_replacement': 'False', 'password': 'password', 'isMounted': False, 'mounttype': 'cifs', 'options': 'rw'}
[AutoMount.py] -getAutoMountPoints:self.automounts --> {'VUDUO2': {'username': 'username', 'sharedir': 'Harddisk', 'sharename': 'VUDUO2', 'active': 'True', 'ip': '192.168.2.106', 'hdd_replacement': 'False', 'password': 'password', 'isMounted': False, 'mounttype': 'cifs', 'options': 'rw'}}
[AutoMount.py] CheckMountPoint
[AutoMount.py] activeMounts:---> 1
[AutoMount.py] U/MOUNTCMD---> mount -t cifs -o rw,rsize=8192,wsize=8192,iocharset=utf8,username=username,password=password //192.168.2.106/Harddisk /media/net/VUDUO2
<RemoteControlCode> Write Remote Control Code : 2
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 1 CI Slots 
resolve: resolve ${sysconfdir}/enigma2/ci
resolve: -> /etc/enigma2/ci
[CI_Activate_Config_CI0] no config file found
[CI_Activate_Config_CI0] error parsing xml...
starting hotplug handler
Removed  /tmp/.sock.hbbtv.url
Looking for embedded skin
EXCEPTION IN PYTHON STARTUP CODE:
------------------------------------------------------------
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/mytest.py", line 607, in <module>
    runScreenTest()
  File "/usr/lib/enigma2/python/mytest.py", line 465, in runScreenTest
    session = Session(desktop = getDesktop(0), summary_desktop = getDesktop(1), navigation = nav)
  File "/usr/lib/enigma2/python/mytest.py", line 185, in __init__
    p(reason=0, session=self)
  File "/usr/lib/enigma2/python/Plugins/Extensions/mediainfo/plugin.py", line 1243, in autostart
Send OK!! : OP_HBBTV_FULLSCREEN
    dlfile_tmp = open(downloadsfile+".tmp", "w")
IOError: [Errno 30] Read-only file system: '/usr/lib/enigma2/python/Plugins/Extensions/mediainfo/downloads.tmp'
------------------------------------------------------------
(exit code 5)
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
]]>
        </dvbapp2crashlog>
    </crashlogs>
</stbcrashlog>
 
AW: VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen

Kann ein Mod oder der admin oder wer auch immer im Download Bereich die Images markieren wegen timebomb usw. Nur um die anderen zu warnen.
 
AW: VU+ Solo 2 Clone - Diskussionsthread (Erfahrungen, Probleme und allgemeine Fragen

Also wenn ich das lese erscheint es mir immer unwahrscheilcher meine Box wieder je zu Leben zu bringen.
Das ist für mich alles unverständlich was ich lese und ich staune wieviel Durchblick hier viele haben.

Ich jedenfalls habe keine Ahnung von Chips,Löten,Jtag und Programmer

Erwarte aber mit Spannung das der Erste es schafft
 
Status
Für weitere Antworten geschlossen.

Ähnliche Themen

I
HowTo Samsung GQ 65" S95C - welcher Settings Editor?
Antworten
4
Aufrufe
262
helicopter3
H
Hilfe: Probleme mit Seagate BarraCuda HDD in VU+ Duo 4K
2
Antworten
26
Aufrufe
570
ofox65
T
Info Erfahrungen mit VCDS China-Klon am Audi Q5 FY (ab BJ 2019)
Antworten
8
Aufrufe
1K
deez
J
Support PSA Diagbox und Opel/Vauxhall Interface?
Antworten
0
Aufrufe
1K
jochen4545
J
B
VU+ Solo allgemein: Kann man damit noch was anfangen, oder sind sie Elektrionik Schrott.
Antworten
1
Aufrufe
1K
benluk
B
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…