Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

gelöst Von scam zum Oscam

    Nobody is reading this thread right now.

Anhänge

Du musst angemeldet sein, um die Anhangsliste zu sehen.
Zuletzt bearbeitet:
hacken gesetzt, sorry wenn ich es falsch erklärt habe beide karten sind in der 7080 und keine in der 7020
 
also orf ist noch dunkel ,wie kann ich die log nur für die orf machen
 
Die Sky Karte raus oder den Sky Reader ausschalten und ein Log auf einem ORF Kanal machen...
 
Hi,
laut ATR und dem alten Log, scheint es eine P410... zu sein.
2019/04/24 18:25:03 612C4B58 r (reader) orf [internal] Dreambox dm7080 found! set Internal cardmhz = 2700
2019/04/24 18:25:04 612C4B58 r (reader) orf [internal] card detected
2019/04/24 18:25:05 612C4B58 r (reader) orf [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2019/04/24 18:25:05 612C4B58 r (reader) orf [internal] ORF ICE CW-Mode recognized
...
2019/04/24 18:25:06 612C4B58 r (reader) orf [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
2019/04/24 18:25:06 612C4B58 r (reader) orf [internal] Calculated work ETU is 41.33 us reader mhz = 450
...
2019/04/24 18:25:06 612C4B58 r (reader) orf [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
...
2019/04/24 18:25:07 612C4B58 r (reader) orf [internal] card detected
2019/04/24 18:25:07 612C4B58 r (reader) orf [internal] type: CryptoWorks
...
2019/04/24 18:25:07 612C4B58 r (reader) orf [internal] type: CryptoWorks, caid: 0D98, ascii serial: #########, hex serial: ##########
...
2019/04/24 18:25:07 612C4B58 r (reader) orf [internal] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2019/04/24 18:25:07 612C4B58 r (reader) orf [internal] providers: 4 (04,08,0C,10)
2019/04/24 18:25:07 612C4B58 r (reader) orf [internal] found card system cryptoworks
2019/04/24 18:25:07 612C4B58 r (reader) orf [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
...
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: 0001, date: 2019/04/22 - 2019/12/29, name: Product 0001
...
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: 0002, date: 2019/04/22 - 2019/12/29, name: Product 0002
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: FFE0, date: 2019/04/21 - 2019/12/28, name: Product FFE0
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: 7FFB, date: 2019/04/01 - 2019/05/01, name: Product 7FFB
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000퀀
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000퀀
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000퀀
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000퀀
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] ready for requests
Also sollte es caid = 0650 sein. Am besten man lässt die Caid im Reader erstmal ganz weg.
Poste dann mal ein Log vom Start und dem Einlesen der Orf-Karte.
 
2019/04/24 20:15:31 00000000 s (main) System name = Linux
2019/04/24 20:15:31 00000000 s (main) Host name = dm7080
2019/04/24 20:15:31 00000000 s (main) Release = 3.4-4.0-dm7080
2019/04/24 20:15:31 00000000 s (main) Version = #1 SMP Fri Feb 9 15:16:04 UTC 2018
2019/04/24 20:15:31 00000000 s (main) Machine = mips
2019/04/24 20:15:31 00000000 s (main) Stb model = dm7080
2019/04/24 20:15:31 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 11301
2019/04/24 20:15:31 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2019/04/24 20:15:31 00000000 s (emu) OSCam-Emu version 769
2019/04/24 20:15:31 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2019/04/24 20:15:31 00000000 s (main) signal handling initialized
2019/04/24 20:15:31 00000000 s (config) 2 provid's loaded
2019/04/24 20:15:31 00000000 s (config) 3 service-id's loaded in 0 ms
2019/04/24 20:15:31 00000000 s (net) cs378x: initialized (fd=6, port=12001, ip=192.168.0.88)
2019/04/24 20:15:31 00000000 s (reader) v14 [internal] creating thread for device /dev/sci1
2019/04/24 20:15:31 00000000 s (reader) orf [internal] creating thread for device /dev/sci0
2019/04/24 20:15:31 2B25E610 r (reader) v14 [internal] Dreambox dm7080 found! set Internal cardmhz = 2700
2019/04/24 20:15:31 00000000 s (main) waiting for local card init
2019/04/24 20:15:31 408C3777 r (reader) orf [internal] Dreambox dm7080 found! set Internal cardmhz = 2700
2019/04/24 20:15:31 446DC042 h (webif) webif: decompressed 197334 bytes back into 470560 bytes
2019/04/24 20:15:31 446DC042 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2019/04/24 20:15:32 408C3777 r (reader) orf [internal] card detected
2019/04/24 20:15:33 408C3777 r (reader) orf [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2019/04/24 20:15:33 408C3777 r (reader) orf [internal] ORF ICE CW-Mode recognized
2019/04/24 20:15:33 408C3777 r (reader) orf [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
2019/04/24 20:15:33 408C3777 r (reader) orf [internal] Calculated work ETU is 41.33 us reader mhz = 450
2019/04/24 20:15:34 408C3777 r (reader) orf [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2019/04/24 20:15:35 408C3777 r (reader) orf [internal] Hist. Bytes: TĦ#3;
2019/04/24 20:15:35 408C3777 r (reader) orf [internal] detect irdeto card
2019/04/24 20:15:35 408C3777 r (reader) orf [internal] caid: 0650, acs: 0.06, country code: AUT
2019/04/24 20:15:35 408C3777 r (reader) orf [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2019/04/24 20:15:35 408C3777 r (reader) orf [internal] WARNING: For Irdeto cards you will have to set 'mhz= 600' in oscam.server
2019/04/24 20:15:35 408C3777 r (reader) orf [internal] active providers: 4 (0f89ff,002d00,002e00,002f00)
2019/04/24 20:15:35 408C3777 r (reader) orf [internal] found card system irdeto
2019/04/24 20:15:35 408C3777 r (reader) orf [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] entitlements for provider: 1, id: 0F89FF
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: 000D, date: 2018/04/28 - 2018/05/28
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: 7FF7, date: 2019/01/27 - 2019/02/06
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: 0001, date: 2019/04/22 - 2019/12/29
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: 0002, date: 2019/04/22 - 2019/12/29
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: FFE0, date: 2019/04/21 - 2019/12/28
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: 7FFB, date: 2019/04/01 - 2019/05/01
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] entitlements for provider: 2, id: 002D00
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: 001D, date: 2018/04/28 - 2018/05/28
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] entitlements for provider: 4, id: 002F00
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: 0031, date: 2018/04/28 - 2018/05/28
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] ready for requests
2019/04/24 20:15:37 00000000 s (main) init for all local cards done
2019/04/24 20:15:37 00000000 s (emmcache) loaded 8 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
2019/04/24 20:15:37 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2019/04/24 20:15:37 00000000 s (anticasc) anti cascading disabled
2019/04/24 20:15:37 426AD013 c (client) plain dvbapi-client granted (local, au=auto (3 reader))
2019/04/24 20:15:37 607372CD c (client) encrypted cs378x-client 192.168.0.202 granted (schlaf, au=auto (3 reader))
2019/04/24 20:15:37 426AD013 c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2019/04/24 20:15:37 426AD013 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0648 ECM_PID: 0078 PROVID: 000000
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0650 ECM_PID: 007A PROVID: 000000
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0D95 ECM_PID: 010E PROVID: 000000
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0D98 ECM_PID: 0110 PROVID: 000000
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 06E2 ECM_PID: 0140 PROVID: 000000
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 0500 ECM_PID: 01CD PROVID: 051900
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 6 CAID: 09C4 ECM_PID: 01E0 PROVID: 000000
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 7 CAID: 098C ECM_PID: 01EA PROVID: 000000
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2019/04/24 20:15:41 426AD013 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
 
Hi,
wie sieht den jetzt dein ORF-Reader aus?
 
[reader]
label = orf
description = ORF-HD-Austria
protocol = internal
device = /dev/sci0
caid = 0D95
boxid = 12345678
boxkey = 1122334455667788
rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE6708AAF97C985CBA8A6C13826963BD3092EB9FC72F773A430724706AA5E1D14E1747842D32069A12D
ins7e11 = 15
force_irdeto = 1
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-g = 1
 
nach ein paar minuten schaltet die orf im web bei AU von ON auf Active um

und sammy909 geändert immer noch schwarz
 
ja danke mache ich bei jeder änderung der config
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

M
DM8000 und V14 ?
Antworten
5
Aufrufe
237
telecomic
W
gelöst OSCAM ORF Anfänger-Probleme
2
Antworten
24
Aufrufe
3K
tom00tom
Frage zu ORF P4 und Easymouse2 unter Oscam, CW und Irdeto, sowie Frage zur neuesten Oscam.bin
Antworten
0
Aufrufe
1K
Madridistaparasiempre
ORF P410 Oscam freischalten?
2
Antworten
15
Aufrufe
3K
moddi00
gelöst no entitlements bei Kabel G09 Card
Antworten
10
Aufrufe
2K
dodo83
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…