gelöst Von scam zum Oscam

[filius00]

eine eigene zeile--

eigene Zeile, mach das aber im Webif (Grafik: Haken setzen)

CW-Modus ???

"Cryptoworks Mode", damit läuft die Karte (meiner Meinung nach) stabiler und ohne keys

 

[martinwalter]

hacken gesetzt, sorry wenn ich es falsch erklärt habe beide karten sind in der 7080 und keine in der 7020

 

[filius00]

sind in der 7080

Schon klar....

 

[martinwalter]

also orf ist noch dunkel ,wie kann ich die log nur für die orf machen

 

[filius00]

Die Sky Karte raus oder den Sky Reader ausschalten und ein Log auf einem ORF Kanal machen...

 

[janni1]

Hi,
laut ATR und dem alten Log, scheint es eine P410... zu sein.

Spoiler

2019/04/24 18:25:03 612C4B58 r (reader) orf [internal] Dreambox dm7080 found! set Internal cardmhz = 2700
2019/04/24 18:25:04 612C4B58 r (reader) orf [internal] card detected
2019/04/24 18:25:05 612C4B58 r (reader) orf [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2019/04/24 18:25:05 612C4B58 r (reader) orf [internal] ORF ICE CW-Mode recognized
...
2019/04/24 18:25:06 612C4B58 r (reader) orf [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
2019/04/24 18:25:06 612C4B58 r (reader) orf [internal] Calculated work ETU is 41.33 us reader mhz = 450
...
2019/04/24 18:25:06 612C4B58 r (reader) orf [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
...
2019/04/24 18:25:07 612C4B58 r (reader) orf [internal] card detected
2019/04/24 18:25:07 612C4B58 r (reader) orf [internal] type: CryptoWorks
...
2019/04/24 18:25:07 612C4B58 r (reader) orf [internal] type: CryptoWorks, caid: 0D98, ascii serial: #########, hex serial: ##########
...
2019/04/24 18:25:07 612C4B58 r (reader) orf [internal] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2019/04/24 18:25:07 612C4B58 r (reader) orf [internal] providers: 4 (04,08,0C,10)
2019/04/24 18:25:07 612C4B58 r (reader) orf [internal] found card system cryptoworks
2019/04/24 18:25:07 612C4B58 r (reader) orf [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
...
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: 0001, date: 2019/04/22 - 2019/12/29, name: Product 0001
...
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: 0002, date: 2019/04/22 - 2019/12/29, name: Product 0002
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: FFE0, date: 2019/04/21 - 2019/12/28, name: Product FFE0
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: 7FFB, date: 2019/04/01 - 2019/05/01, name: Product 7FFB
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000퀀
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000퀀
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000퀀
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000퀀
2019/04/24 18:25:08 612C4B58 r (reader) orf [cryptoworks] ready for requests

Also sollte es caid = 0650 sein. Am besten man lässt die Caid im Reader erstmal ganz weg.
Poste dann mal ein Log vom Start und dem Einlesen der Orf-Karte.

 

[martinwalter]

Spoiler: log orf

2019/04/24 20:15:31 00000000 s (main) System name = Linux
2019/04/24 20:15:31 00000000 s (main) Host name = dm7080
2019/04/24 20:15:31 00000000 s (main) Release = 3.4-4.0-dm7080
2019/04/24 20:15:31 00000000 s (main) Version = #1 SMP Fri Feb 9 15:16:04 UTC 2018
2019/04/24 20:15:31 00000000 s (main) Machine = mips
2019/04/24 20:15:31 00000000 s (main) Stb model = dm7080
2019/04/24 20:15:31 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 11301
2019/04/24 20:15:31 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2019/04/24 20:15:31 00000000 s (emu) OSCam-Emu version 769
2019/04/24 20:15:31 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2019/04/24 20:15:31 00000000 s (main) signal handling initialized
2019/04/24 20:15:31 00000000 s (config) 2 provid's loaded
2019/04/24 20:15:31 00000000 s (config) 3 service-id's loaded in 0 ms
2019/04/24 20:15:31 00000000 s (net) cs378x: initialized (fd=6, port=12001, ip=192.168.0.88)
2019/04/24 20:15:31 00000000 s (reader) v14 [internal] creating thread for device /dev/sci1
2019/04/24 20:15:31 00000000 s (reader) orf [internal] creating thread for device /dev/sci0
2019/04/24 20:15:31 2B25E610 r (reader) v14 [internal] Dreambox dm7080 found! set Internal cardmhz = 2700
2019/04/24 20:15:31 00000000 s (main) waiting for local card init
2019/04/24 20:15:31 408C3777 r (reader) orf [internal] Dreambox dm7080 found! set Internal cardmhz = 2700
2019/04/24 20:15:31 446DC042 h (webif) webif: decompressed 197334 bytes back into 470560 bytes
2019/04/24 20:15:31 446DC042 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2019/04/24 20:15:32 408C3777 r (reader) orf [internal] card detected
2019/04/24 20:15:33 408C3777 r (reader) orf [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2019/04/24 20:15:33 408C3777 r (reader) orf [internal] ORF ICE CW-Mode recognized
2019/04/24 20:15:33 408C3777 r (reader) orf [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
2019/04/24 20:15:33 408C3777 r (reader) orf [internal] Calculated work ETU is 41.33 us reader mhz = 450
2019/04/24 20:15:34 408C3777 r (reader) orf [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2019/04/24 20:15:35 408C3777 r (reader) orf [internal] Hist. Bytes: TĦ#3;
2019/04/24 20:15:35 408C3777 r (reader) orf [internal] detect irdeto card
2019/04/24 20:15:35 408C3777 r (reader) orf [internal] caid: 0650, acs: 0.06, country code: AUT
2019/04/24 20:15:35 408C3777 r (reader) orf [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2019/04/24 20:15:35 408C3777 r (reader) orf [internal] WARNING: For Irdeto cards you will have to set 'mhz= 600' in oscam.server
2019/04/24 20:15:35 408C3777 r (reader) orf [internal] active providers: 4 (0f89ff,002d00,002e00,002f00)
2019/04/24 20:15:35 408C3777 r (reader) orf [internal] found card system irdeto
2019/04/24 20:15:35 408C3777 r (reader) orf [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] entitlements for provider: 1, id: 0F89FF
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: 000D, date: 2018/04/28 - 2018/05/28
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: 7FF7, date: 2019/01/27 - 2019/02/06
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: 0001, date: 2019/04/22 - 2019/12/29
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: 0002, date: 2019/04/22 - 2019/12/29
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: FFE0, date: 2019/04/21 - 2019/12/28
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: 7FFB, date: 2019/04/01 - 2019/05/01
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] entitlements for provider: 2, id: 002D00
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: 001D, date: 2018/04/28 - 2018/05/28
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] entitlements for provider: 4, id: 002F00
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] chid: 0031, date: 2018/04/28 - 2018/05/28
2019/04/24 20:15:36 408C3777 r (reader) orf [irdeto] ready for requests
2019/04/24 20:15:37 00000000 s (main) init for all local cards done
2019/04/24 20:15:37 00000000 s (emmcache) loaded 8 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
2019/04/24 20:15:37 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2019/04/24 20:15:37 00000000 s (anticasc) anti cascading disabled
2019/04/24 20:15:37 426AD013 c (client) plain dvbapi-client granted (local, au=auto (3 reader))
2019/04/24 20:15:37 607372CD c (client) encrypted cs378x-client 192.168.0.202 granted (schlaf, au=auto (3 reader))
2019/04/24 20:15:37 426AD013 c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2019/04/24 20:15:37 426AD013 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0648 ECM_PID: 0078 PROVID: 000000
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0650 ECM_PID: 007A PROVID: 000000
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0D95 ECM_PID: 010E PROVID: 000000
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0D98 ECM_PID: 0110 PROVID: 000000
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 06E2 ECM_PID: 0140 PROVID: 000000
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 0500 ECM_PID: 01CD PROVID: 051900
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 6 CAID: 09C4 ECM_PID: 01E0 PROVID: 000000
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 ecmpid 7 CAID: 098C ECM_PID: 01EA PROVID: 000000
2019/04/24 20:15:37 426AD013 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2019/04/24 20:15:41 426AD013 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

 

[janni1]

Hi,
wie sieht den jetzt dein ORF-Reader aus?

 

[martinwalter]

Spoiler: orf READER

[reader]
label = orf
description = ORF-HD-Austria
protocol = internal
device = /dev/sci0
caid = 0D95
boxid = 12345678
boxkey = 1122334455667788
rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE6708AAF97C985CBA8A6C13826963BD3092EB9FC72F773A430724706AA5E1D14E1747842D32069A12D
ins7e11 = 15
force_irdeto = 1
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-g = 1

 

[filius00]

caid = 0D95

bei Irdeto und P4....
caid = 0650

 

[martinwalter]

habe geändert

 

[sammy909]

Hi, bei Irdeto will oscam 600 mhz haben.

 

[martinwalter]

nach ein paar minuten schaltet die orf im web bei AU von ON auf Active um

und sammy909 geändert immer noch schwarz

 

[sammy909]

Neustarten

 

[martinwalter]

ja danke mache ich bei jeder änderung der config