servusssss
Newbie
- Registriert
- 3. Juni 2011
- Beiträge
- 9
- Reaktionspunkte
- 1
- Punkte
- 23
Hallo zusammen,
ich versuche gerade meine HD02 zu verlängern, leider klappt das nicht.
Da ich noch wenig Ahnung habe mit Oscam könnt ihr mir vielleicht weiterhelfen.
Ich habe eine ORF Ice Karte diese funktionier auch auch das AU, leider bei der HD02 nicht.
Verwendet wird die Oscam in einer DM8000 Oscam 1.20 r10653
Oscam.conf
oscam.user
Oscam.server
Oscam.dvbapi
Livelog
Des ist SAT1 HD eingestellt.
Was kann ich noch machen, Danke für eure Hilfe!
Update:
Jetzt bekomme ich EMM leider sind alle NOK:
Neues LiveLog:
ich versuche gerade meine HD02 zu verlängern, leider klappt das nicht.
Da ich noch wenig Ahnung habe mit Oscam könnt ihr mir vielleicht weiterhelfen.
Ich habe eine ORF Ice Karte diese funktionier auch auch das AU, leider bei der HD02 nicht.
Verwendet wird die Oscam in einer DM8000 Oscam 1.20 r10653
Oscam.conf
global]
disableuserfile = 1
disablelog = 1
logfile = /dev/tty
nice = -1
waitforcards = 0
preferlocalcards = 0
lb_savepath = /tmp/.oscam/stat
lb_mode = 1
lb_save = 300
lb_reopen_seconds = 60
[cache]
delay = 20
cacheexenablestats = 0
[cccam]
port = 23957,29896
version = 2.3.0
reshare = 2
[dvbapi]
enabled = 1
au = 1
request_mode = 1
user = dvbapi
boxtype = dreambox
[webif]
httpport = 16001
httpuser = oscam
httppwd = strenggeheim
httphelplang = de
httprefresh = 15
httpallowed = 0.0.0.0-255.255.255.255
hideclient_to = 20
disableuserfile = 1
disablelog = 1
logfile = /dev/tty
nice = -1
waitforcards = 0
preferlocalcards = 0
lb_savepath = /tmp/.oscam/stat
lb_mode = 1
lb_save = 300
lb_reopen_seconds = 60
[cache]
delay = 20
cacheexenablestats = 0
[cccam]
port = 23957,29896
version = 2.3.0
reshare = 2
[dvbapi]
enabled = 1
au = 1
request_mode = 1
user = dvbapi
boxtype = dreambox
[webif]
httpport = 16001
httpuser = oscam
httppwd = strenggeheim
httphelplang = de
httprefresh = 15
httpallowed = 0.0.0.0-255.255.255.255
hideclient_to = 20
oscam.user
[account]
user = dvbapi
pwd = dvbapi
hostname = localhost
monlevel = 4
au = 1
betatunnel = 1833.FFFF:1702
group = 1
keepalive = 1
user = dvbapi
pwd = dvbapi
hostname = localhost
monlevel = 4
au = 1
betatunnel = 1833.FFFF:1702
group = 1
keepalive = 1
Oscam.server
[reader]
label = ORF_ICE
protocol = internal
device = /dev/sci1
caid = 0D95
detect = cd
mhz = 450
cardmhz = 2700
ident = 0D95:000000,000004,000010
group = 1
emmcache = 1,3,2,0
lb_weight = 300
[reader]
label = Intern_Lower_HD02
description = Set as HD plus HD02
protocol = internal
device = /dev/sci0
caid = 1843
ecmwhitelist = 1843:89
detect = cd
mhz = 540
cardmhz = 2700
ident = 1843:000000,003411,008011
group = 1
emmcache = 1,1,2,0
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
auprovid = 003411
label = ORF_ICE
protocol = internal
device = /dev/sci1
caid = 0D95
detect = cd
mhz = 450
cardmhz = 2700
ident = 0D95:000000,000004,000010
group = 1
emmcache = 1,3,2,0
lb_weight = 300
[reader]
label = Intern_Lower_HD02
description = Set as HD plus HD02
protocol = internal
device = /dev/sci0
caid = 1843
ecmwhitelist = 1843:89
detect = cd
mhz = 540
cardmhz = 2700
ident = 1843:000000,003411,008011
group = 1
emmcache = 1,1,2,0
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
auprovid = 003411
Oscam.dvbapi
P: 0500
P: 1843
P: 1843
Livelog
2016/01/05 12:55:27 8F09D0 h (reader) Intern_Lower_HD02 [internal] Restarting reader
2016/01/05 12:55:27 8F09D0 h (reader) Intern_Lower_HD02 [internal] creating thread for device /dev/sci0
2016/01/05 12:55:27 91C340 r (reader) Intern_Lower_HD02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz)
2016/01/05 12:55:27 91C340 r (reader) Intern_Lower_HD02 [internal] Reader sci internal, detected box type: dm8000
2016/01/05 12:55:28 91C340 r (reader) Intern_Lower_HD02 [internal] card detected
2016/01/05 12:55:29 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:30 91C340 r (reader) Intern_Lower_HD02 [internal] ATR: xxxx
2016/01/05 12:55:30 91C340 r (reader) Intern_Lower_HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/01/05 12:55:30 91C340 r (reader) Intern_Lower_HD02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2016/01/05 12:55:30 91C340 r (reader) Intern_Lower_HD02 [internal] Buffers readed 0 bytes total time_us 75221
2016/01/05 12:55:30 91C340 r (reader) Intern_Lower_HD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2016/01/05 12:55:30 91C340 r (reader) Intern_Lower_HD02 [internal] Card responded ok for ifsd request of 160
2016/01/05 12:55:31 91C340 r (reader) Intern_Lower_HD02 [internal] detect native nagra card
2016/01/05 12:55:32 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:33 91C340 r (reader) Intern_Lower_HD02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/05 12:55:34 91C340 r (reader) Intern_Lower_HD02 [internal] T1 Resync command error, trying to reactivate!
2016/01/05 12:55:35 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:36 91C340 r (reader) Intern_Lower_HD02 [internal] ATR: xxxx
2016/01/05 12:55:36 91C340 r (reader) Intern_Lower_HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/01/05 12:55:36 91C340 r (reader) Intern_Lower_HD02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2016/01/05 12:55:36 91C340 r (reader) Intern_Lower_HD02 [internal] Buffers readed 0 bytes total time_us 75201
2016/01/05 12:55:37 91C340 r (reader) Intern_Lower_HD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2016/01/05 12:55:37 91C340 r (reader) Intern_Lower_HD02 [internal] Card responded ok for ifsd request of 160
2016/01/05 12:55:37 91C340 r (reader) Intern_Lower_HD02 [internal] card system not supported
2016/01/05 12:55:37 91C340 r (reader) Intern_Lower_HD02 [internal] Normal mode failed, reverting to Deprecated Mode
2016/01/05 12:55:38 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:38 91C340 r (reader) Intern_Lower_HD02 [internal] ATR: xxxx
2016/01/05 12:55:38 91C340 r (reader) Intern_Lower_HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/01/05 12:55:38 91C340 r (reader) Intern_Lower_HD02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2016/01/05 12:55:38 91C340 r (reader) Intern_Lower_HD02 [internal] Buffers readed 0 bytes total time_us 75227
2016/01/05 12:55:39 91C340 r (reader) Intern_Lower_HD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2016/01/05 12:55:40 91C340 r (reader) Intern_Lower_HD02 [internal] Warning: Card returned error on setting ifsd value to 160
2016/01/05 12:55:41 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:41 91C340 r (reader) Intern_Lower_HD02 [internal] detect native nagra card
2016/01/05 12:55:43 91C340 r (reader) Intern_Lower_HD02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/05 12:55:44 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:44 91C340 r (reader) Intern_Lower_HD02 [internal] T1 Resync command error, trying to reactivate!
2016/01/05 12:55:46 91C340 r (reader) Intern_Lower_HD02 [internal] ATR: xxxx
2016/01/05 12:55:46 91C340 r (reader) Intern_Lower_HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/01/05 12:55:46 91C340 r (reader) Intern_Lower_HD02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2016/01/05 12:55:46 91C340 r (reader) Intern_Lower_HD02 [internal] Buffers readed 0 bytes total time_us 75195
2016/01/05 12:55:47 91C340 r (reader) Intern_Lower_HD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2016/01/05 12:55:47 91C340 r (reader) Intern_Lower_HD02 [internal] Card responded ok for ifsd request of 160
2016/01/05 12:55:47 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:49 91C340 r (reader) Intern_Lower_HD02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/05 12:55:50 91C340 r (reader) Intern_Lower_HD02 [internal] T1 Resync command error, trying to reactivate!
2016/01/05 12:55:50 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:51 91C340 r (reader) Intern_Lower_HD02 [internal] ATR: xxxx
2016/01/05 12:55:51 91C340 r (reader) Intern_Lower_HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/01/05 12:55:51 91C340 r (reader) Intern_Lower_HD02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2016/01/05 12:55:51 91C340 r (reader) Intern_Lower_HD02 [internal] Buffers readed 0 bytes total time_us 75217
2016/01/05 12:55:52 91C340 r (reader) Intern_Lower_HD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2016/01/05 12:55:52 91C340 r (reader) Intern_Lower_HD02 [internal] Card responded ok for ifsd request of 160
2016/01/05 12:55:52 91C340 r (reader) Intern_Lower_HD02 [internal] card system not supported
2016/01/05 12:55:52 91C340 r (reader) Intern_Lower_HD02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2016/01/05 12:55:52 91C340 r (reader) Intern_Lower_HD02 [internal] card initializing error
2016/01/05 12:55:27 8F09D0 h (reader) Intern_Lower_HD02 [internal] creating thread for device /dev/sci0
2016/01/05 12:55:27 91C340 r (reader) Intern_Lower_HD02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz)
2016/01/05 12:55:27 91C340 r (reader) Intern_Lower_HD02 [internal] Reader sci internal, detected box type: dm8000
2016/01/05 12:55:28 91C340 r (reader) Intern_Lower_HD02 [internal] card detected
2016/01/05 12:55:29 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:30 91C340 r (reader) Intern_Lower_HD02 [internal] ATR: xxxx
2016/01/05 12:55:30 91C340 r (reader) Intern_Lower_HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/01/05 12:55:30 91C340 r (reader) Intern_Lower_HD02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2016/01/05 12:55:30 91C340 r (reader) Intern_Lower_HD02 [internal] Buffers readed 0 bytes total time_us 75221
2016/01/05 12:55:30 91C340 r (reader) Intern_Lower_HD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2016/01/05 12:55:30 91C340 r (reader) Intern_Lower_HD02 [internal] Card responded ok for ifsd request of 160
2016/01/05 12:55:31 91C340 r (reader) Intern_Lower_HD02 [internal] detect native nagra card
2016/01/05 12:55:32 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:33 91C340 r (reader) Intern_Lower_HD02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/05 12:55:34 91C340 r (reader) Intern_Lower_HD02 [internal] T1 Resync command error, trying to reactivate!
2016/01/05 12:55:35 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:36 91C340 r (reader) Intern_Lower_HD02 [internal] ATR: xxxx
2016/01/05 12:55:36 91C340 r (reader) Intern_Lower_HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/01/05 12:55:36 91C340 r (reader) Intern_Lower_HD02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2016/01/05 12:55:36 91C340 r (reader) Intern_Lower_HD02 [internal] Buffers readed 0 bytes total time_us 75201
2016/01/05 12:55:37 91C340 r (reader) Intern_Lower_HD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2016/01/05 12:55:37 91C340 r (reader) Intern_Lower_HD02 [internal] Card responded ok for ifsd request of 160
2016/01/05 12:55:37 91C340 r (reader) Intern_Lower_HD02 [internal] card system not supported
2016/01/05 12:55:37 91C340 r (reader) Intern_Lower_HD02 [internal] Normal mode failed, reverting to Deprecated Mode
2016/01/05 12:55:38 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:38 91C340 r (reader) Intern_Lower_HD02 [internal] ATR: xxxx
2016/01/05 12:55:38 91C340 r (reader) Intern_Lower_HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/01/05 12:55:38 91C340 r (reader) Intern_Lower_HD02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2016/01/05 12:55:38 91C340 r (reader) Intern_Lower_HD02 [internal] Buffers readed 0 bytes total time_us 75227
2016/01/05 12:55:39 91C340 r (reader) Intern_Lower_HD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2016/01/05 12:55:40 91C340 r (reader) Intern_Lower_HD02 [internal] Warning: Card returned error on setting ifsd value to 160
2016/01/05 12:55:41 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:41 91C340 r (reader) Intern_Lower_HD02 [internal] detect native nagra card
2016/01/05 12:55:43 91C340 r (reader) Intern_Lower_HD02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/05 12:55:44 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:44 91C340 r (reader) Intern_Lower_HD02 [internal] T1 Resync command error, trying to reactivate!
2016/01/05 12:55:46 91C340 r (reader) Intern_Lower_HD02 [internal] ATR: xxxx
2016/01/05 12:55:46 91C340 r (reader) Intern_Lower_HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/01/05 12:55:46 91C340 r (reader) Intern_Lower_HD02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2016/01/05 12:55:46 91C340 r (reader) Intern_Lower_HD02 [internal] Buffers readed 0 bytes total time_us 75195
2016/01/05 12:55:47 91C340 r (reader) Intern_Lower_HD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2016/01/05 12:55:47 91C340 r (reader) Intern_Lower_HD02 [internal] Card responded ok for ifsd request of 160
2016/01/05 12:55:47 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:49 91C340 r (reader) Intern_Lower_HD02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/01/05 12:55:50 91C340 r (reader) Intern_Lower_HD02 [internal] T1 Resync command error, trying to reactivate!
2016/01/05 12:55:50 76E005F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/01/05 12:55:51 91C340 r (reader) Intern_Lower_HD02 [internal] ATR: xxxx
2016/01/05 12:55:51 91C340 r (reader) Intern_Lower_HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/01/05 12:55:51 91C340 r (reader) Intern_Lower_HD02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2016/01/05 12:55:51 91C340 r (reader) Intern_Lower_HD02 [internal] Buffers readed 0 bytes total time_us 75217
2016/01/05 12:55:52 91C340 r (reader) Intern_Lower_HD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2016/01/05 12:55:52 91C340 r (reader) Intern_Lower_HD02 [internal] Card responded ok for ifsd request of 160
2016/01/05 12:55:52 91C340 r (reader) Intern_Lower_HD02 [internal] card system not supported
2016/01/05 12:55:52 91C340 r (reader) Intern_Lower_HD02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2016/01/05 12:55:52 91C340 r (reader) Intern_Lower_HD02 [internal] card initializing error
Des ist SAT1 HD eingestellt.
Was kann ich noch machen, Danke für eure Hilfe!
Update:
Jetzt bekomme ich EMM leider sind alle NOK:
Neues LiveLog:
- (reader) Intern_Lower_HD02 [nagra] Successfully added EMM to /usr/keys/Intern_Lower_HD02_global_emm.log
- 2016/01/05 13:12:07 8EFD68 c (ecm) dvbapi (1843&000000/0000/EF10/89:FE15FB33838B5408CFB55F8D826A76D8): rejected group (1 ms) - RTL HD (no matching reader)
- 2016/01/05 13:12:08 8EFD68 c (ecm) dvbapi (1843&000000/0000/EF10/89:FE15FB33838B5408CFB55F8D826A76D8): rejected group (0 ms) - RTL HD (no matching reader)
- 2016/01/05 13:12:08 8EFD68 c (dvbapi) Demuxer 0 restarting decodingrequests after 2 ms with 1 enabled and 5 disabled ecmpids!
- 2016/01/05 13:12:08 8EFD68 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19CC ANY CHID PMTPID 0060 VPID 00FF
- 2016/01/05 13:12:08 8EFD68 c (ecm) dvbapi (1843&000000/0000/EF10/89:FE15FB33838B5408CFB55F8D826A76D8): rejected group (1 ms) - RTL HD (no matching reader)
Zuletzt bearbeitet:
