V14 und HD01

[webspider4]

habe jetzt einen 2. Easymouse angeschlossen und will meine HD+ Karte nutzen um die v14 zu entlasten
läuft aber nicht so wie es soll

Spoiler

• 2014/09/05 14:38:43 xxxxxxxxc stube (098C&000000/07D2/EF75/98:00000000000000000000000000000000): invalid (0 ms) - ProSieben HD (invalid SID)
• 2014/09/05 14:38:46 xxxxxxxxr HD01 [mouse] Error activating card.
• 2014/09/05 14:38:47 5xxxxxxx r HD01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/09/05 14:38:47 xxxxxxxxr HD01 [mouse] card initializing error

habe schon mir der oscam.sever verschiedene einstellungen probiert, die Karte läuft im Receiverschaht, abe nicht im Reader

Spoiler

[reader]
label = sky
protocol = mouse
device = /dev/ttyUSB1
services = hdplus,sat-sky-komplett
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:52,64,6A,9C,A1,91,96,97,98,9B
detect = cd
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
ndsversion = 2


[reader]
label = HD01
protocol = mouse
device = /dev/ttyUSB0
services = hdplus
group = 2
caid = 1830
rsakey = BF.................................
boxkey = A....................
cardmhz = 357
detect = cd
group = 2

[reader]
label = keyfile
protocol = constcw
caid = 1801,0D05,0500,0100
device = /var/media/ftp/uStor01/addon/oscam/SoftCam.key
group = 1

 

[supraracer]

AW: V14 und HD01

Teste mal mit
mhz = 368
cardmhz = 368

Würde dir auch empfehlen die beiden Mäuse fix mit der Serial zuzuordnen.

EDIT: Um die V14 zu entlasten musst du dann natürlich noch die hdplus Services verbieten, also
services = !hdplus,sat-sky-komplett
bei der V14 einfügen.

-supraracer

 

[webspider4]

AW: V14 und HD01

sieht schon anders aus, wird aber nicht hell am Rceiver

Spoiler

• 2014/09/05 14:51:55 xxxxxx r HD01 [mouse] T1 Resync command error, trying to reactivate!
• 2014/09/05 14:51:55 xxxxxx r HD01 [mouse] WARNING: Cant get readerstatus!
• 2014/09/05 14:51:58 5xxxx r HD01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
• 2014/09/05 14:51:58 xxxxxx r HD01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/09/05 14:51:58 xxxxxxr HD01 [mouse] Setting baudrate to 115200 bps
• 2014/09/05 14:51:58 xxxxxxr HD01 [mouse] Calculated work ETU is 8.70 us reader mhz = 368
• 2014/09/05 14:51:58 xxxxxxr HD01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2014/09/05 14:52:0 xxxxxx0 r HD01 [mouse] Warning: Card returned error on setting ifsd value to 251
• 2014/09/05 14:52:00 5xxxxxr HD01 [mouse] found card system emu
• 2014/09/05 14:52:00 xxxxxx r HD01 [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1

und wie ordene ich den readern eine id zu?

 

[supraracer]

AW: V14 und HD01

Zeig mal Log wenn der Client versucht zu entschlüsseln. Client user ist auch in group 2 ?
Wegen zuordnen, such mal hier im Forum nach udev.

EDIT:
2014/09/05 14:52:0 xxxxxx0 r HD01 [mouse] Warning: Card returned error on setting ifsd value to 251
sieht aber auch nicht wirklich gut aus, was für nen Server hast du überhaupt?

-supraracer

 

[webspider4]

AW: V14 und HD01

habe mal ein bischen länger laufen lassen und umgeschaltet

Spoiler

2014/09/05 15:03:06 xxxxxx r sky [mouse] WARNING: Cant get readerstatus!
2014/09/05 15:03:08 xxxxx c stube (098C&000000/0C1E/006B/98:59C73068503CEE983A9A76BD24E732AE): rejected group (1 ms) - Sky Cinema Hits HD (no matching reader)
2014/09/05 15:03:08 xxxxxx r sky [mouse] WARNING: Cant get readerstatus!
2014/09/05 15:03:10 xxxxxx r sky [mouse] Error activating card.
2014/09/05 15:03:10 xxxxx c stube (098C&000000/025B/0083/98:E7B26AB085D2890A21937E8F46E4AACE): rejected group (1 ms) - Sky Cinema HD (no matching reader)
2014/09/05 15:03:10 xxxxxx r sky [mouse] WARNING: Cant get readerstatus!
2014/09/05 15:03:11 XXXXX r HD01 [mouse] Error activating card.
2014/09/05 15:03:11 XXXXX r HD01 [mouse] WARNING: Cant get readerstatus!
2014/09/05 15:03:12 xxxxxx r sky [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/09/05 15:03:12 xxxxxx r sky [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/09/05 15:03:12 xxxxxx r sky [mouse] Setting baudrate to 153600 bps
2014/09/05 15:03:13 xxxxxx r sky [mouse] Calculated work ETU is 6.51 us reader mhz = 357
2014/09/05 15:03:13 xxxxxx r sky [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/09/05 15:03:13 xxxxx c stube (098C&000000/0BC0/007F/98:3D2F2565610C09963F7912813EF6145D): rejected group (1 ms) - 13th Street HD (no matching reader)
2014/09/05 15:03:14 xxxxxx r sky [mouse] Card type: P1TV
2014/09/05 15:03:14 xxxxxx r sky [mouse] Rom version: 20AA
2014/09/05 15:03:14 xxxxxx r sky [mouse] Credit available on card: 0 euro
2014/09/05 15:03:14 xxxxxx r sky [mouse] Extended 4C detected
2014/09/05 15:03:14 xxxxxx r sky [mouse] FuseByte: 05
2014/09/05 15:03:14 xxxxxx r sky [mouse] Region Code: 00BO0102
2014/09/05 15:03:14 xxxxxx r sky [mouse] Country Code: DEU
2014/09/05 15:03:14 xxxxxx r sky [mouse] Pincode read: 2890
2014/09/05 15:03:14 xxxxxx r sky [mouse] PCB settings: FF FF FF FF
2014/09/05 15:03:14 xxxxxx r sky [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/09/05 15:03:14 xxxxxx r sky [mouse] serial: ########, BoxID: ########, baseyear: 2004
2014/09/05 15:03:14 xxxxxx r sky [mouse] ready for requests
2014/09/05 15:03:14 xxxxxx r sky [mouse] found card system videoguard2
2014/09/05 15:03:14 xxxxxx r sky [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/09/05 15:03:14 xxxxxx r sky [videoguard2] card detected
2014/09/05 15:03:14 xxxxxx r sky [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/09/05 15:03:14 xxxxxx r sky [videoguard2] tier: 0046, expiry date: 2014/12/15-00:00:00 Sky HD+ (Gratisjahr)
2014/09/05 15:03:14 xxxxxx r sky [videoguard2] tier: 0056, expiry date: 2014/12/15-00:00:00 Sky 3D Film
2014/09/05 15:03:14 xxxxxx r sky [videoguard2] tier: 0057, expiry date: 2014/12/15-00:00:00 Sky 3D Sport
2014/09/05 15:03:14 xxxxxx r sky [videoguard2] tier: 007b, expiry date: 2014/12/15-00:00:00 Sky
2014/09/05 15:03:14 xxxxxx r sky [videoguard2] tier: 008e, expiry date: 2014/12/15-00:00:00 Beate-Uhse.TV
2014/09/05 15:03:14 xxxxxx r sky [videoguard2] tier: 00c0, expiry date: 2014/12/15-00:00:00 Sky Welt Extra
2014/09/05 15:03:14 xxxxxx r sky [videoguard2] tier: 00c7, expiry date: 2014/12/15-00:00:00 Sky Welt
2014/09/05 15:03:14 xxxxxx r sky [videoguard2] tier: 00c8, expiry date: 2014/12/15-00:00:00 Sky Film
2014/09/05 15:03:14 xxxxxx r sky [videoguard2] tier: 00c9, expiry date: 2014/12/15-00:00:00 Sky Welt HD
2014/09/05 15:03:14 xxxxxx r sky [videoguard2] tier: 00ca, expiry date: 2014/12/15-00:00:00 Sky Film HD
2014/09/05 15:03:14 xxxxxx r sky [videoguard2] tier: 00f3, expiry date: 2014/12/15-00:00:00 Blue Movie Info
2014/09/05 15:03:14 xxxxxx r sky [videoguard2] tier: 00fa, expiry date: 2014/12/15-00:00:00
2014/09/05 15:03:15 XXXXX r HD01 [mouse] Error activating card.
2014/09/05 15:03:17 XXXXX r HD01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/05 15:03:17 XXXXX r HD01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/05 15:03:17 XXXXX r HD01 [mouse] Setting baudrate to 115200 bps
2014/09/05 15:03:17 XXXXX r HD01 [mouse] Calculated work ETU is 8.70 us reader mhz = 368
2014/09/05 15:03:17 XXXXX r HD01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/09/05 15:03:18 XXXXX r HD01 [mouse] Warning: Card returned error on setting ifsd value to 251
2014/09/05 15:03:19 xxxxx c stube (098C&000000/0BC0/007F/98449D9D2D8ED485B14F84E53DAAF185E): found (113 ms) by sky - 13th Street HD
2014/09/05 15:03:19 XXXXX r HD01 [mouse] detect native nagra card
2014/09/05 15:03:21 XXXXX r HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/05 15:03:23 XXXXX r HD01 [mouse] T1 Resync command error, trying to reactivate!
2014/09/05 15:03:23 xxxxx c stube (1830&000000/0000/EF75/92:34159A8D0D71EB136BB6B609E972A938): rejected group (0 ms) - ProSieben HD (no matching reader)
2014/09/05 15:03:23 xxxxx c stube (098C&000000/07D2/EF75/98:00000000000000000000000000000000): invalid (1 ms) - ProSieben HD (invalid SID)
2014/09/05 15:03:24 XXXXX r HD01 [mouse] WARNING: Cant get readerstatus!
2014/09/05 15:03:24 xxxxxx r sky [videoguard2] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Protocol error
2014/09/05 15:03:24 xxxxxx r sky [videoguard2] Error getting card status.
2014/09/05 15:03:24 xxxxxx r sky [videoguard2] card ejected
2014/09/05 15:03:25 xxxxxx r sky [mouse] card detected
2014/09/05 15:03:25 xxxxxx r sky [mouse] WARNING: Cant get readerstatus!
2014/09/05 15:03:28 xxxxxx r sky [mouse] ATR: 83 03 40 57 5B
2014/09/05 15:03:28 xxxxxx r sky [mouse] ERROR: Could not read reader->convention
2014/09/05 15:03:28 xxxxxx r sky [mouse] Error activating card.
2014/09/05 15:03:29 XXXXX r HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/05 15:03:30 XXXXX r HD01 [mouse] T1 Resync command error, trying to reactivate!
2014/09/05 15:03:31 xxxxx c stube (098C&000000/0BC0/007F/98:1202A78D938D89E4A798D7ED208890A2): rejected group (0 ms) - 13th Street HD (no matching reader)
2014/09/05 15:03:32 xxxxxx r sky [mouse] ATR: 3F FD 15 25 02 50 80 02 E0 41 B0 0A 69 FF 4A 02 00 F0 00 00 50
2014/09/05 15:03:32 xxxxxx r sky [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/09/05 15:03:32 xxxxxx r sky [mouse] Setting baudrate to 153600 bps
2014/09/05 15:03:32 xxxxxx r sky [mouse] Calculated work ETU is 6.51 us reader mhz = 357
2014/09/05 15:03:33 xxxxxx r sky [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/09/05 15:03:33 XXXXX r HD01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/05 15:03:33 XXXXX r HD01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/05 15:03:33 XXXXX r HD01 [mouse] Setting baudrate to 115200 bps
2014/09/05 15:03:33 XXXXX r HD01 [mouse] Calculated work ETU is 8.70 us reader mhz = 368
2014/09/05 15:03:33 XXXXX r HD01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/09/05 15:03:34 xxxxxx r sky [mouse] found card system emu
2014/09/05 15:03:34 xxxxxx r sky [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/09/05 15:03:35 XXXXX r HD01 [mouse] Warning: Card returned error on setting ifsd value to 251
2014/09/05 15:03:35 XXXXX r HD01 [mouse] found card system emu
2014/09/05 15:03:35 XXXXX r HD01 [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/09/05 15:03:37 xxxxxx r sky [emu] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Protocol error
2014/09/05 15:03:37 xxxxxx r sky [emu] Error getting card status.
2014/09/05 15:03:37 xxxxxx r sky [emu] card ejected
2014/09/05 15:03:38 xxxxx c stube (098C&000000/0BC0/007F/98:1067EA4015C1C5EA8D7ECD90AFCE7FF0): rejected group (0 ms) - 13th Street HD (no matching reader)
2014/09/05 15:03:38 xxxxxx r sky [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Protocol error
2014/09/05 15:03:38 xxxxxx r sky [mouse] Error getting card status.
2014/09/05 15:03:39 xxxxxx r sky [mouse] card detected
2014/09/05 15:03:39 xxxxx c stube (098C&000000/0B5E/007B/98:CD50B99D4188C3108D9F1BE715BA0E66): rejected group (0 ms) - TNT Serie HD (no matching reader)
2014/09/05 15:03:41 xxxxxx r sky [mouse] ATR: 3F FD 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50
2014/09/05 15:03:43 xxxxxx r sky [mouse] Warning: D=0 is invalid, forcing D=1
2014/09/05 15:03:43 xxxxxx r sky [mouse] Init card protocol T5, FI=3, F=744, D=1, N=21
2014/09/05 15:03:43 xxxxxx r sky [mouse] Setting baudrate to 4800 bps
2014/09/05 15:03:43 xxxxxx r sky [mouse] Calculated work ETU is 208.40 us reader mhz = 357
2014/09/05 15:03:43 xxxxxx r sky [mouse] ERROR: Parse_ATR returned error
2014/09/05 15:03:43 xxxxxx r sky [mouse] Error activating card.
2014/09/05 15:03:43 xxxxx c stube (098C&000000/0BC0/007F/98:6E6EAD88881E1DA5A3F5674BD2567EFC): rejected group (0 ms) - 13th Street HD (no matching reader)
2014/09/05 15:03:44 XXXXX r HD01 [emu] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Protocol error
2014/09/05 15:03:44 XXXXX r HD01 [emu] Error getting card status.
2014/09/05 15:03:44 XXXXX r HD01 [emu] card ejected
2014/09/05 15:03:45 XXXXX r HD01 [mouse] card detected
2014/09/05 15:03:45 XXXXX r HD01 [mouse] WARNING: Cant get readerstatus!
2014/09/05 15:03:47 0 --- Skipped 1 duplicated log lines ---
2014/09/05 15:03:47 xxxxxx r sky [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/09/05 15:03:47 xxxxxx r sky [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/09/05 15:03:47 xxxxxx r sky [mouse] Setting baudrate to 153600 bps
2014/09/05 15:03:47 XXXXX r HD01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/05 15:03:47 XXXXX r HD01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/05 15:03:47 XXXXX r HD01 [mouse] Setting baudrate to 115200 bps
2014/09/05 15:03:47 xxxxxx r sky [mouse] Calculated work ETU is 6.51 us reader mhz = 357
2014/09/05 15:03:47 XXXXX r HD01 [mouse] Calculated work ETU is 8.70 us reader mhz = 368
2014/09/05 15:03:47 XXXXX r HD01 [mouse] WARNING: Cant get readerstatus!
2014/09/05 15:03:47 xxxxxx r sky [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/09/05 15:03:47 XXXXX r HD01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/09/05 15:03:48 xxxxxx r sky [mouse] Card type: P1TV
2014/09/05 15:03:48 xxxxxx r sky [mouse] Rom version: 20AA
2014/09/05 15:03:48 xxxxxx r sky [mouse] Credit available on card: 0 euro
2014/09/05 15:03:48 xxxxxx r sky [mouse] Extended 4C detected
2014/09/05 15:03:48 xxxxxx r sky [mouse] FuseByte: 05
2014/09/05 15:03:48 xxxxxx r sky [mouse] Region Code: 00BO0102
2014/09/05 15:03:48 xxxxxx r sky [mouse] Country Code: DEU
2014/09/05 15:03:48 xxxxxx r sky [mouse] Pincode read: 2890
2014/09/05 15:03:48 xxxxxx r sky [mouse] PCB settings: FF FF FF FF
2014/09/05 15:03:48 xxxxxx r sky [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/09/05 15:03:48 xxxxxx r sky [mouse] serial: ########, BoxID: ########, baseyear: 2004
2014/09/05 15:03:48 xxxxxx r sky [mouse] ready for requests
2014/09/05 15:03:48 xxxxxx r sky [mouse] found card system videoguard2
2014/09/05 15:03:48 xxxxxx r sky [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/09/05 15:03:48 xxxxxx r sky [videoguard2] card detected
2014/09/05 15:03:48 xxxxxx r sky [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/09/05 15:03:48 xxxxxx r sky [videoguard2] tier: 0046, expiry date: 2014/12/15-00:00:00 Sky HD+ (Gratisjahr)
2014/09/05 15:03:48 xxxxxx r sky [videoguard2] tier: 0056, expiry date: 2014/12/15-00:00:00 Sky 3D Film
2014/09/05 15:03:48 XXXXX r HD01 [mouse] Warning: Card returned error on setting ifsd value to 251
2014/09/05 15:03:49 XXXXX r HD01 [mouse] detect native nagra card
2014/09/05 15:03:49 xxxxxx r sky [videoguard2] tier: 0057, expiry date: 2014/12/15-00:00:00 Sky 3D Sport
2014/09/05 15:03:49 xxxxxx r sky [videoguard2] tier: 007b, expiry date: 2014/12/15-00:00:00 Sky
2014/09/05 15:03:49 xxxxxx r sky [videoguard2] tier: 008e, expiry date: 2014/12/15-00:00:00 Beate-Uhse.TV
2014/09/05 15:03:49 xxxxxx r sky [videoguard2] tier: 00c0, expiry date: 2014/12/15-00:00:00 Sky Welt Extra
2014/09/05 15:03:49 xxxxxx r sky [videoguard2] tier: 00c7, expiry date: 2014/12/15-00:00:00 Sky Welt
2014/09/05 15:03:49 xxxxxx r sky [videoguard2] tier: 00c8, expiry date: 2014/12/15-00:00:00 Sky Film
2014/09/05 15:03:49 xxxxxx r sky [videoguard2] tier: 00c9, expiry date: 2014/12/15-00:00:00 Sky Welt HD
2014/09/05 15:03:49 xxxxxx r sky [videoguard2] tier: 00ca, expiry date: 2014/12/15-00:00:00 Sky Film HD
2014/09/05 15:03:49 xxxxxx r sky [videoguard2] tier: 00f3, expiry date: 2014/12/15-00:00:00 Blue Movie Info
2014/09/05 15:03:49 xxxxxx r sky [videoguard2] tier: 00fa, expiry date: 2014/12/15-00:00:00
2014/09/05 15:03:51 XXXXX r HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/05 15:03:52 XXXXX r HD01 [mouse] T1 Resync command error, trying to reactivate!
2014/09/05 15:03:55 xxxxx c stube disconnected from 92.208.16.111
2014/09/05 15:03:56 5D46D0 c encrypted cccam-client 92.208.16.111 granted (stube, au=on (1 reader))
2014/09/05 15:03:58 XXXXX r HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/05 15:03:59 XXXXX r HD01 [mouse] T1 Resync command error, trying to reactivate!
2014/09/05 15:04:00 5D46D0 c stube (098C&000000/0BC0/007F/98:14468EEFDC750E78EF3ADE698D2A44A2): found (123 ms) by sky - 13th Street HD
2014/09/05 15:04:01 5D46D0 c stube (098C&000000/0B5E/007B/98:3588F587379D24F1DA0000A427D35D9B): found (94 ms) by sky - TNT Serie HD
2014/09/05 15:04:02 5D46D0 c stube (098C&000000/0B5E/007B/98:9892BA97E20756FC1D54BFEA46A102FA): found (94 ms) by sky - TNT Serie HD
2014/09/05 15:04:04 XXXXX r HD01 [mouse] found card system emu
2014/09/05 15:04:04 XXXXX r HD01 [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/09/05 15:04:05 xxxxxx r sky [videoguard2] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Protocol error
2014/09/05 15:04:05 xxxxxx r sky [videoguard2] Error getting card status.
2014/09/05 15:04:05 xxxxxx r sky [videoguard2] card ejected
2014/09/05 15:04:06 xxxxxx r sky [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Protocol error
2014/09/05 15:04:06 xxxxxx r sky [mouse] Error getting card status.
2014/09/05 15:04:07 xxxxxx r sky [mouse] card detected
2014/09/05 15:04:07 xxxxxx r sky [mouse] WARNING: Cant get readerstatus!
2014/09/05 15:04:08 5D46D0 c stube (098C&000000/0B5E/007B/98:879B41F399EDFE44D74A531FC239548F): rejected group (0 ms) - TNT Serie HD (no matching reader)
2014/09/05 15:04:09 xxxxxx r sky [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/09/05 15:04:09 xxxxxx r sky [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/09/05 15:04:09 xxxxxx r sky [mouse] Setting baudrate to 153600 bps
2014/09/05 15:04:09 xxxxxx r sky [mouse] Calculated work ETU is 6.51 us reader mhz = 357
2014/09/05 15:04:10 xxxxxx r sky [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/09/05 15:04:12 5D46D0 c stube (098C&000000/0B58/0074/98:4F1869AE07CCFEE5809007921C7CA819): rejected group (0 ms) - Sky Action HD (no matching reader)
2014/09/05 15:04:14 xxxxxx r sky [mouse] found card system emu
2014/09/05 15:04:14 xxxxxx r sky [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/09/05 15:04:14 XXXXX r HD01 [emu] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Protocol error
2014/09/05 15:04:14 XXXXX r HD01 [emu] Error getting card status.
2014/09/05 15:04:14 XXXXX r HD01 [emu] card ejected
2014/09/05 15:04:15 xxxxxx r sky [emu] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Protocol error
2014/09/05 15:04:15 xxxxxx r sky [emu] Error getting card status.
2014/09/05 15:04:15 xxxxxx r sky [emu] card ejected
2014/09/05 15:04:15 XXXXX r HD01 [mouse] card detected
2014/09/05 15:04:15 XXXXX r HD01 [mouse] WARNING: Cant get readerstatus!
2014/09/05 15:04:16 xxxxxx r sky [mouse] card detected
2014/09/05 15:04:16 xxxxxx r sky [mouse] WARNING: Cant get readerstatus!
2014/09/05 15:04:17 XXXXX r HD01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/05 15:04:17 XXXXX r HD01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/05 15:04:17 XXXXX r HD01 [mouse] Setting baudrate to 115200 bps
2014/09/05 15:04:17 XXXXX r HD01 [mouse] Calculated work ETU is 8.70 us reader mhz = 368
2014/09/05 15:04:17 XXXXX r HD01 [mouse] WARNING: Cant get readerstatus!
2014/09/05 15:04:17 XXXXX r HD01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/09/05 15:04:17 xxxxxx r sky [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/09/05 15:04:17 xxxxxx r sky [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/09/05 15:04:17 xxxxxx r sky [mouse] Setting baudrate to 153600 bps
2014/09/05 15:04:17 xxxxxx r sky [mouse] WARNING: Cant get readerstatus!
2014/09/05 15:04:17 xxxxxx r sky [mouse] Calculated work ETU is 6.51 us reader mhz = 357
2014/09/05 15:04:18 xxxxxx r sky [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/09/05 15:04:18 XXXXX r HD01 [mouse] Warning: Card returned error on setting ifsd value to 251
2014/09/05 15:04:19 xxxxxx r sky [mouse] Card type: P1TV
2014/09/05 15:04:19 xxxxxx r sky [mouse] Rom version: 20AA
2014/09/05 15:04:19 xxxxxx r sky [mouse] Credit available on card: 0 euro
2014/09/05 15:04:19 xxxxxx r sky [mouse] Extended 4C detected
2014/09/05 15:04:19 XXXXX r HD01 [mouse] detect native nagra card
2014/09/05 15:04:19 xxxxxx r sky [mouse] FuseByte: 05
2014/09/05 15:04:19 xxxxxx r sky [mouse] Region Code: 00BO0102
2014/09/05 15:04:19 xxxxxx r sky [mouse] Country Code: DEU
2014/09/05 15:04:20 xxxxxx r sky [mouse] Pincode read: 2890
2014/09/05 15:04:20 xxxxxx r sky [mouse] PCB settings: FF FF FF FF
2014/09/05 15:04:20 xxxxxx r sky [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/09/05 15:04:20 xxxxxx r sky [mouse] serial: ########, BoxID: ########, baseyear: 2004
2014/09/05 15:04:20 xxxxxx r sky [mouse] ready for requests
2014/09/05 15:04:20 xxxxxx r sky [mouse] found card system videoguard2
2014/09/05 15:04:20 xxxxxx r sky [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/09/05 15:04:20 xxxxxx r sky [videoguard2] card detected
2014/09/05 15:04:20 xxxxxx r sky [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/09/05 15:04:20 xxxxxx r sky [videoguard2] tier: 0046, expiry date: 2014/12/15-00:00:00 Sky HD+ (Gratisjahr)
2014/09/05 15:04:20 xxxxxx r sky [videoguard2] tier: 0056, expiry date: 2014/12/15-00:00:00 Sky 3D Film
2014/09/05 15:04:20 xxxxxx r sky [videoguard2] tier: 0057, expiry date: 2014/12/15-00:00:00 Sky 3D Sport
2014/09/05 15:04:20 xxxxxx r sky [videoguard2] tier: 007b, expiry date: 2014/12/15-00:00:00 Sky
2014/09/05 15:04:20 xxxxxx r sky [videoguard2] tier: 008e, expiry date: 2014/12/15-00:00:00 Beate-Uhse.TV
2014/09/05 15:04:20 xxxxxx r sky [videoguard2] tier: 00c0, expiry date: 2014/12/15-00:00:00 Sky Welt Extra
2014/09/05 15:04:20 xxxxxx r sky [videoguard2] tier: 00c7, expiry date: 2014/12/15-00:00:00 Sky Welt
2014/09/05 15:04:20 xxxxxx r sky [videoguard2] tier: 00c8, expiry date: 2014/12/15-00:00:00 Sky Film
2014/09/05 15:04:20 xxxxxx r sky [videoguard2] tier: 00c9, expiry date: 2014/12/15-00:00:00 Sky Welt HD
2014/09/05 15:04:20 xxxxxx r sky [videoguard2] tier: 00ca, expiry date: 2014/12/15-00:00:00 Sky Film HD
2014/09/05 15:04:20 xxxxxx r sky [videoguard2] tier: 00f3, expiry date: 2014/12/15-00:00:00 Blue Movie Info
2014/09/05 15:04:20 xxxxxx r sky [videoguard2] tier: 00fa, expiry date: 2014/12/15-00:00:00
2014/09/05 15:04:21 XXXXX r HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/05 15:04:22 XXXXX r HD01 [mouse] T1 Resync command error, trying to reactivate!
2014/09/05 15:04:25 XXXXX r HD01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/05 15:04:25 XXXXX r HD01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/05 15:04:25 XXXXX r HD01 [mouse] Setting baudrate to 115200 bps
2014/09/05 15:04:25 XXXXX r HD01 [mouse] Calculated work ETU is 8.70 us reader mhz = 368
2014/09/05 15:04:25 XXXXX r HD01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/09/05 15:04:25 XXXXX r HD01 [mouse] Card responded ok for ifsd request of 251
2014/09/05 15:04:26 XXXXX r HD01 [mouse] found card system nagra
2014/09/05 15:04:26 XXXXX r HD01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/09/05 15:04:26 XXXXX r HD01 [nagra] ROM: D N A S P 1 4 2
2014/09/05 15:04:26 XXXXX r HD01 [nagra] REV: R e v G C 6
2014/09/05 15:04:26 XXXXX r HD01 [nagra] SER: ############
2014/09/05 15:04:26 XXXXX r HD01 [nagra] CAID: 1830
2014/09/05 15:04:26 XXXXX r HD01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/09/05 15:04:26 XXXXX r HD01 [nagra] Prv.ID: 00 00 00 00
2014/09/05 15:04:26 XXXXX r HD01 [nagra] IRD ID: ############
2014/09/05 15:04:26 XXXXX r HD01 [nagra] active to: 2014/10/27 11:59
2014/09/05 15:04:26 XXXXX r HD01 [nagra] -----------------------------------------
2014/09/05 15:04:26 XXXXX r HD01 [nagra] |id |tier |valid from |valid to |
2014/09/05 15:04:26 XXXXX r HD01 [nagra] +----+--------+------------+------------+
2014/09/05 15:04:26 XXXXX r HD01 [nagra] |8011|0064 |2014/08/29 |2015/08/30 |
2014/09/05 15:04:26 XXXXX r HD01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2014/09/05 15:04:27 XXXXX r HD01 [nagra] -----------------------------------------
2014/09/05 15:04:27 XXXXX r HD01 [nagra] ready for requests
2014/09/05 15:04:28 XXXXX r HD01 [nagra] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Protocol error
2014/09/05 15:04:28 XXXXX r HD01 [nagra] Error getting card status.
2014/09/05 15:04:28 XXXXX r HD01 [nagra] card ejected
2014/09/05 15:04:29 XXXXX r HD01 [mouse] card detected
2014/09/05 15:04:31 XXXXX r HD01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/05 15:04:31 XXXXX r HD01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/05 15:04:31 XXXXX r HD01 [mouse] Setting baudrate to 115200 bps
2014/09/05 15:04:31 XXXXX r HD01 [mouse] Calculated work ETU is 8.70 us reader mhz = 368
2014/09/05 15:04:31 XXXXX r HD01 [mouse] WARNING: Cant get readerstatus!
2014/09/05 15:04:31 XXXXX r HD01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/09/05 15:04:32 XXXXX r HD01 [mouse] Warning: Card returned error on setting ifsd value to 251
2014/09/05 15:04:33 XXXXX r HD01 [mouse] detect native nagra card
2014/09/05 15:04:35 XXXXX r HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/05 15:04:36 XXXXX r HD01 [mouse] T1 Resync command error, trying to reactivate!
2014/09/05 15:04:37 XXXXX r HD01 [mouse] WARNING: Cant get readerstatus!
2014/09/05 15:04:40 XXXXX r HD01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/09/05 15:04:40 XXXXX r HD01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/05 15:04:40 XXXXX r HD01 [mouse] Setting baudrate to 115200 bps
2014/09/05 15:04:40 XXXXX r HD01 [mouse] Calculated work ETU is 8.70 us reader mhz = 368
2014/09/05 15:04:40 XXXXX r HD01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/09/05 15:04:41 XXXXX r HD01 [mouse] Warning: Card returned error on setting ifsd value to 251
2014/09/05 15:04:43 XXXXX r HD01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/05 15:04:45 XXXXX r HD01 [mouse] T1 Resync command error, trying to reactivate!
2014/09/05 15:04:48 XXXXX r HD01 [mouse] found card system emu
2014/09/05 15:04:48 XXXXX r HD01 [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/09/05 15:04:50 xxxxxx r sky [videoguard2] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Protocol error
2014/09/05 15:04:50 xxxxxx r sky [videoguard2] Error getting card status.
2014/09/05 15:04:50 xxxxxx r sky [videoguard2] card ejected
2014/09/05 15:04:51 xxxxxx r sky [mouse] card detected
2014/09/05 15:04:51 xxxxxx r sky [mouse] WARNING: Cant get readerstatus!

 

[supraracer]

AW: V14 und HD01

Das einzige was ich sehe, dass abwechselnd mal eine oder beide Karten nicht richtig gelesen werden.
Eventuell vertauscht es dir die Reader, nochmals der Hinweis auf udev und nochmals die Frage welchen Server du überhaupt hast.

-supraracer

 

[webspider4]

AW: V14 und HD01

also ich habe eine Fritzbox 7320 als Client mit dem neuen Boardimage, das mit dem abwechselnd lesen habe ich jetzt auch gesehen, am Receiver nach kurze zeit Standbild.
Mit UDEV muss ich erst mal google fragen

 

[supraracer]

AW: V14 und HD01

Hier noch ein interessanter Thread zum Thema Fritz/HD01/Easymouse2: https://www.digital-eliteboard.com/307643-warning-card-returned-error-setting-ifsd-value-251-a.html

-supraracer

 

[webspider4]

AW: V14 und HD01

dann werde ich wohl noch ein bisschen lesen müssen, nur mit v14 rennt das Ding ja