Hallo Leute,
ich habe bis vor kurzem ein raspberry mit HD02 S02 als Oscam Server und mehrere Kathi ufs912 Oscam clients laufen.
Ich will/muss jetzt auch auf die V14 und wollte euch kurz mal meine configs zeigen bevor ich jetzt 48h logge und ich doch was falsch habe.
Also ich würde mich freuen, wenn der ein oder andere, meine configs und logs mal überfliegen könnte.
Ich versuche nur das wichtigste zu posten. Wenn was fehlt, bitte melden.
Schon vorab 1000x Danke.
Ich hab alles was nötig war an FAQ und Laberthreads gelesen und danach meinen raspberry bzw. die Oscam umgebaut.
Vorab. Die Karte scheint auch erkannt zu werden, fragt sich nur ob ich das so richtig gemacht habe.
Im Log steht komischerweise
ohne das die Karte je irgendwo drin war mit blockemm. Aber vielleicht ist das ja normal, wenn die nicht nicht aktiv ist. Das wisst ihr besser als ich.
Hier die Files des Servers
oscam.conf
oscam.user
oscam.server
Jetzt die Client Files
oscam.conf
oscam.user
oscam.server
Und nun noch die Logs
Server Start
Server Sender Log
Bitte nicht wundern. Hatte die 1843 als Caid vergessen, deshalb fragt er nur die skyde ab. Hab ich korrigiert. Aber was will mir "paired" sagen, wo die Karte noch nie irgendwo aktiv war. Ist das normal, wenn die Karte noch jungfräulich ist und noch keine Freischaltung beantragt wurde?
Daaaaankeee
ich habe bis vor kurzem ein raspberry mit HD02 S02 als Oscam Server und mehrere Kathi ufs912 Oscam clients laufen.
Ich will/muss jetzt auch auf die V14 und wollte euch kurz mal meine configs zeigen bevor ich jetzt 48h logge und ich doch was falsch habe.
Also ich würde mich freuen, wenn der ein oder andere, meine configs und logs mal überfliegen könnte.
Ich versuche nur das wichtigste zu posten. Wenn was fehlt, bitte melden.
Schon vorab 1000x Danke.
Ich hab alles was nötig war an FAQ und Laberthreads gelesen und danach meinen raspberry bzw. die Oscam umgebaut.
Vorab. Die Karte scheint auch erkannt zu werden, fragt sich nur ob ich das so richtig gemacht habe.
Im Log steht komischerweise
Code:
[LIST]
[*]2015/07/17 21:17:46 10AF3D0 r skyde [videoguard2] classD3 ins54: no cw --> Card isn't active
[*]2015/07/17 21:17:46 10AF3D0 r skyde [videoguard2] classD3 ins54: no cw --> Card is paired
[/LIST]
Hier die Files des Servers
oscam.conf
[global]serverip = 0.0.0.0
disablelog = 0
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
cachedelay = 0
saveinithistory = 1
loghistorysize = 4096
[cccam]
port = xxxxx
reshare = 1
version = 2.3.0
reshare_mode = 1
stealth = 1
Webif ist auch drin, aber poste ich nicht mit
disablelog = 0
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
cachedelay = 0
saveinithistory = 1
loghistorysize = 4096
[cccam]
port = xxxxx
reshare = 1
version = 2.3.0
reshare_mode = 1
stealth = 1
Webif ist auch drin, aber poste ich nicht mit
oscam.user
oscam.server
[reader]
enable = 1
label = skyde
protocol = mouse
device = /dev/ttyUSB0
cardmhz = 357
mhz = 357
detect = CD
boxid = 12345678
ins7e11 = 15
group = 2
caid = 098C
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
#saveemm-unknown = 1
ndsversion = 2
fix07 = 1
[reader]
enable = 1
label = hdplus
Protocol = mouse
device = /dev/ttyUSB1
cardmhz = 357
detect = CD
group = 1
caid = 1843
rsakey = xyz
boxkey = xyz
emmcache = 1,1,2
enable = 1
label = skyde
protocol = mouse
device = /dev/ttyUSB0
cardmhz = 357
mhz = 357
detect = CD
boxid = 12345678
ins7e11 = 15
group = 2
caid = 098C
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
#saveemm-unknown = 1
ndsversion = 2
fix07 = 1
[reader]
enable = 1
label = hdplus
Protocol = mouse
device = /dev/ttyUSB1
cardmhz = 357
detect = CD
group = 1
caid = 1843
rsakey = xyz
boxkey = xyz
emmcache = 1,1,2
Jetzt die Client Files
oscam.conf
[global]nice = -10
disablelog = 1
loghistorysize = 200
logfile = /tmp/oscam.log
usrfile = /tmp/oscamuserfile
[webif]
.......
[dvbapi]
enabled = 1
au = 1
decodeforever = 1
boxtype = duckbox
user = dvbapi
disablelog = 1
loghistorysize = 200
logfile = /tmp/oscam.log
usrfile = /tmp/oscamuserfile
[webif]
.......
[dvbapi]
enabled = 1
au = 1
decodeforever = 1
boxtype = duckbox
user = dvbapi
oscam.user
[account]user = dvbapi
pwd = dvbapi
group = 1
au = 1
uniq = 0
pwd = dvbapi
group = 1
au = 1
uniq = 0
oscam.server
label = skydeenable = 1
protocol = cccam
device = 192.168.xx.xx,12002
user = user123
password = pass123
reconnecttimeout = 30
caid = 1843, 098C
group = 1
protocol = cccam
device = 192.168.xx.xx,12002
user = user123
password = pass123
reconnecttimeout = 30
caid = 1843, 098C
group = 1
Und nun noch die Logs
Server Start
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Jul 17 20:57:47 2015
-------------------------------------------------------------------------------
2015/07/17 20:57:47 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9885 (arm-linux-gnueabihf)
2015/07/17 20:57:47 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2348
2015/07/17 20:57:47 0 s services reloaded: 0 services freed, 23 services loaded, rejected 0
2015/07/17 20:57:47 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2015/07/17 20:57:47 0 s signal handling initialized
2015/07/17 20:57:48 0 s 1453 service-id's loaded in 60 ms
2015/07/17 20:57:48 0 s 841 provid's loaded
2015/07/17 20:57:48 0 s cccam: initialized (fd=5, port=12002)
2015/07/17 20:57:48 0 s skyde [mouse] creating thread for device /dev/ttyUSB0
2015/07/17 20:57:48 0 s hdplus [mouse] creating thread for device /dev/ttyUSB1
2015/07/17 20:57:48 0 s OSEmu [cs357x] creating thread for device 127.0.0.1
2015/07/17 20:57:48 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/07/17 20:57:48 0 s waiting for local card init
2015/07/17 20:57:48 110CC68 p cs357x proxy 127.0.0.1:54321
2015/07/17 20:57:48 110CC68 p OSEmu [cs357x] proxy initialized, server 127.0.0.1:54321
2015/07/17 20:57:48 11092D8 h webif: decompressed 149737 bytes back into 364504 bytes
2015/07/17 20:57:48 11092D8 h HTTP Server running. ip=0.0.0.0 port=16002
2015/07/17 20:57:48 10B1308 r hdplus [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2015/07/17 20:57:48 10AF3D0 r skyde [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/07/17 20:57:49 10B1308 r hdplus [mouse] card detected
2015/07/17 20:57:49 10AF3D0 r skyde [mouse] card detected
2015/07/17 20:57:50 10AF3D0 r skyde [mouse] ATR: xx xx xx
2015/07/17 20:57:50 10AF3D0 r skyde [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/07/17 20:57:50 10AF3D0 r skyde [mouse] Setting baudrate to 38400 bps
2015/07/17 20:57:50 10AF3D0 r skyde [mouse] Calculated work ETU is 33.87 us reader mhz = 357
2015/07/17 20:57:50 10AF3D0 r skyde [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/07/17 20:57:50 10B1308 r hdplus [mouse] ATR: xx xx xx
2015/07/17 20:57:50 10B1308 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/07/17 20:57:50 10B1308 r hdplus [mouse] Setting baudrate to 111600 bps
2015/07/17 20:57:50 10B1308 r hdplus [mouse] Calculated work ETU is 11.65 us reader mhz = 357
2015/07/17 20:57:50 10B1308 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/07/17 20:57:50 10B1308 r hdplus [mouse] Card responded ok for ifsd request of 160
2015/07/17 20:57:51 10AF3D0 r skyde [mouse] Card type: P1TV
2015/07/17 20:57:51 10AF3D0 r skyde [mouse] Rom version: 20AA
2015/07/17 20:57:51 10AF3D0 r skyde [mouse] Credit available on card: 0 euro
2015/07/17 20:57:51 10AF3D0 r skyde [mouse] Extended 4C detected
2015/07/17 20:57:51 10AF3D0 r skyde [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/07/17 20:57:51 10AF3D0 r skyde [mouse] found card system videoguard2
2015/07/17 20:57:51 10AF3D0 r skyde [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/07/17 20:57:51 10AF3D0 r skyde [videoguard2] card detected
2015/07/17 20:57:51 10AF3D0 r skyde [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/07/17 20:57:51 10B1308 r hdplus [mouse] detect native nagra card
2015/07/17 20:57:52 10AF3D0 r skyde [mouse] ATR: xx xx xx
2015/07/17 20:57:52 10AF3D0 r skyde [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/07/17 20:57:52 10AF3D0 r skyde [mouse] Setting baudrate to 153600 bps
2015/07/17 20:57:52 10AF3D0 r skyde [mouse] Calculated work ETU is 8.47 us reader mhz = 357
2015/07/17 20:57:52 10AF3D0 r skyde [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/07/17 20:57:52 10B1308 r hdplus [mouse] found card system nagra
2015/07/17 20:57:52 10B1308 r hdplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/07/17 20:57:52 10B1308 r hdplus [nagra] ROM: D N A S P 1 8 0
2015/07/17 20:57:52 10B1308 r hdplus [nagra] REV: M e r 0 0 0
2015/07/17 20:57:52 10B1308 r hdplus [nagra] SER: ############
2015/07/17 20:57:52 10B1308 r hdplus [nagra] CAID: 1843
2015/07/17 20:57:52 10B1308 r hdplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/07/17 20:57:52 10B1308 r hdplus [nagra] Prv.ID: 00 00 00 00
2015/07/17 20:57:52 10B1308 r hdplus [nagra] IRD ID: ############
2015/07/17 20:57:52 10B1308 r hdplus [nagra] active to: 2015/07/19 04:00
2015/07/17 20:57:52 10B1308 r hdplus [nagra] -----------------------------------------
2015/07/17 20:57:52 10B1308 r hdplus [nagra] |id |tier |valid from |valid to |
2015/07/17 20:57:52 10B1308 r hdplus [nagra] +----+--------+------------+------------+
2015/07/17 20:57:53 10B1308 r hdplus [nagra] |8011|0066 |2011/12/05 |2012/12/05 |
2015/07/17 20:57:53 10B1308 r hdplus [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2015/07/17 20:57:53 10B1308 r hdplus [nagra] |8011|0BEA |2015/01/21 |2016/02/26 |
2015/07/17 20:57:53 10B1308 r hdplus [nagra] -----------------------------------------
2015/07/17 20:57:53 10B1308 r hdplus [nagra] ready for requests
2015/07/17 20:57:53 10AF3D0 r skyde [mouse] Card type: P1TV
2015/07/17 20:57:53 10AF3D0 r skyde [mouse] Rom version: 20AA
2015/07/17 20:57:53 10AF3D0 r skyde [mouse] Credit available on card: 0 euro
2015/07/17 20:57:53 10AF3D0 r skyde [mouse] Extended 4C detected
2015/07/17 20:57:53 10AF3D0 r skyde [mouse] FuseByte: 00
2015/07/17 20:57:53 10AF3D0 r skyde [mouse] Region Code:
2015/07/17 20:57:53 10AF3D0 r skyde [mouse] Country Code: DEU
2015/07/17 20:57:54 10AF3D0 r skyde [mouse] Pincode read: 1234
2015/07/17 20:57:54 10AF3D0 r skyde [mouse] PCB settings: FF FF FF FF
2015/07/17 20:57:54 10AF3D0 r skyde [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/07/17 20:57:54 10AF3D0 r skyde [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/07/17 20:57:54 10AF3D0 r skyde [mouse] ready for requests
2015/07/17 20:57:54 10AF3D0 r skyde [mouse] found card system videoguard2
2015/07/17 20:57:54 10AF3D0 r skyde [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/07/17 20:57:54 10AF3D0 r skyde [videoguard2] card detected
2015/07/17 20:57:54 10AF3D0 r skyde [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/07/17 20:57:56 0 s init for all local cards done
2015/07/17 20:57:56 0 s anti cascading disabled
>> OSCam << cardserver started at Fri Jul 17 20:57:47 2015
-------------------------------------------------------------------------------
2015/07/17 20:57:47 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9885 (arm-linux-gnueabihf)
2015/07/17 20:57:47 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2348
2015/07/17 20:57:47 0 s services reloaded: 0 services freed, 23 services loaded, rejected 0
2015/07/17 20:57:47 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2015/07/17 20:57:47 0 s signal handling initialized
2015/07/17 20:57:48 0 s 1453 service-id's loaded in 60 ms
2015/07/17 20:57:48 0 s 841 provid's loaded
2015/07/17 20:57:48 0 s cccam: initialized (fd=5, port=12002)
2015/07/17 20:57:48 0 s skyde [mouse] creating thread for device /dev/ttyUSB0
2015/07/17 20:57:48 0 s hdplus [mouse] creating thread for device /dev/ttyUSB1
2015/07/17 20:57:48 0 s OSEmu [cs357x] creating thread for device 127.0.0.1
2015/07/17 20:57:48 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/07/17 20:57:48 0 s waiting for local card init
2015/07/17 20:57:48 110CC68 p cs357x proxy 127.0.0.1:54321
2015/07/17 20:57:48 110CC68 p OSEmu [cs357x] proxy initialized, server 127.0.0.1:54321
2015/07/17 20:57:48 11092D8 h webif: decompressed 149737 bytes back into 364504 bytes
2015/07/17 20:57:48 11092D8 h HTTP Server running. ip=0.0.0.0 port=16002
2015/07/17 20:57:48 10B1308 r hdplus [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2015/07/17 20:57:48 10AF3D0 r skyde [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/07/17 20:57:49 10B1308 r hdplus [mouse] card detected
2015/07/17 20:57:49 10AF3D0 r skyde [mouse] card detected
2015/07/17 20:57:50 10AF3D0 r skyde [mouse] ATR: xx xx xx
2015/07/17 20:57:50 10AF3D0 r skyde [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/07/17 20:57:50 10AF3D0 r skyde [mouse] Setting baudrate to 38400 bps
2015/07/17 20:57:50 10AF3D0 r skyde [mouse] Calculated work ETU is 33.87 us reader mhz = 357
2015/07/17 20:57:50 10AF3D0 r skyde [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/07/17 20:57:50 10B1308 r hdplus [mouse] ATR: xx xx xx
2015/07/17 20:57:50 10B1308 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/07/17 20:57:50 10B1308 r hdplus [mouse] Setting baudrate to 111600 bps
2015/07/17 20:57:50 10B1308 r hdplus [mouse] Calculated work ETU is 11.65 us reader mhz = 357
2015/07/17 20:57:50 10B1308 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/07/17 20:57:50 10B1308 r hdplus [mouse] Card responded ok for ifsd request of 160
2015/07/17 20:57:51 10AF3D0 r skyde [mouse] Card type: P1TV
2015/07/17 20:57:51 10AF3D0 r skyde [mouse] Rom version: 20AA
2015/07/17 20:57:51 10AF3D0 r skyde [mouse] Credit available on card: 0 euro
2015/07/17 20:57:51 10AF3D0 r skyde [mouse] Extended 4C detected
2015/07/17 20:57:51 10AF3D0 r skyde [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/07/17 20:57:51 10AF3D0 r skyde [mouse] found card system videoguard2
2015/07/17 20:57:51 10AF3D0 r skyde [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/07/17 20:57:51 10AF3D0 r skyde [videoguard2] card detected
2015/07/17 20:57:51 10AF3D0 r skyde [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/07/17 20:57:51 10B1308 r hdplus [mouse] detect native nagra card
2015/07/17 20:57:52 10AF3D0 r skyde [mouse] ATR: xx xx xx
2015/07/17 20:57:52 10AF3D0 r skyde [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/07/17 20:57:52 10AF3D0 r skyde [mouse] Setting baudrate to 153600 bps
2015/07/17 20:57:52 10AF3D0 r skyde [mouse] Calculated work ETU is 8.47 us reader mhz = 357
2015/07/17 20:57:52 10AF3D0 r skyde [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/07/17 20:57:52 10B1308 r hdplus [mouse] found card system nagra
2015/07/17 20:57:52 10B1308 r hdplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/07/17 20:57:52 10B1308 r hdplus [nagra] ROM: D N A S P 1 8 0
2015/07/17 20:57:52 10B1308 r hdplus [nagra] REV: M e r 0 0 0
2015/07/17 20:57:52 10B1308 r hdplus [nagra] SER: ############
2015/07/17 20:57:52 10B1308 r hdplus [nagra] CAID: 1843
2015/07/17 20:57:52 10B1308 r hdplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/07/17 20:57:52 10B1308 r hdplus [nagra] Prv.ID: 00 00 00 00
2015/07/17 20:57:52 10B1308 r hdplus [nagra] IRD ID: ############
2015/07/17 20:57:52 10B1308 r hdplus [nagra] active to: 2015/07/19 04:00
2015/07/17 20:57:52 10B1308 r hdplus [nagra] -----------------------------------------
2015/07/17 20:57:52 10B1308 r hdplus [nagra] |id |tier |valid from |valid to |
2015/07/17 20:57:52 10B1308 r hdplus [nagra] +----+--------+------------+------------+
2015/07/17 20:57:53 10B1308 r hdplus [nagra] |8011|0066 |2011/12/05 |2012/12/05 |
2015/07/17 20:57:53 10B1308 r hdplus [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2015/07/17 20:57:53 10B1308 r hdplus [nagra] |8011|0BEA |2015/01/21 |2016/02/26 |
2015/07/17 20:57:53 10B1308 r hdplus [nagra] -----------------------------------------
2015/07/17 20:57:53 10B1308 r hdplus [nagra] ready for requests
2015/07/17 20:57:53 10AF3D0 r skyde [mouse] Card type: P1TV
2015/07/17 20:57:53 10AF3D0 r skyde [mouse] Rom version: 20AA
2015/07/17 20:57:53 10AF3D0 r skyde [mouse] Credit available on card: 0 euro
2015/07/17 20:57:53 10AF3D0 r skyde [mouse] Extended 4C detected
2015/07/17 20:57:53 10AF3D0 r skyde [mouse] FuseByte: 00
2015/07/17 20:57:53 10AF3D0 r skyde [mouse] Region Code:
2015/07/17 20:57:53 10AF3D0 r skyde [mouse] Country Code: DEU
2015/07/17 20:57:54 10AF3D0 r skyde [mouse] Pincode read: 1234
2015/07/17 20:57:54 10AF3D0 r skyde [mouse] PCB settings: FF FF FF FF
2015/07/17 20:57:54 10AF3D0 r skyde [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/07/17 20:57:54 10AF3D0 r skyde [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/07/17 20:57:54 10AF3D0 r skyde [mouse] ready for requests
2015/07/17 20:57:54 10AF3D0 r skyde [mouse] found card system videoguard2
2015/07/17 20:57:54 10AF3D0 r skyde [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/07/17 20:57:54 10AF3D0 r skyde [videoguard2] card detected
2015/07/17 20:57:54 10AF3D0 r skyde [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/07/17 20:57:56 0 s init for all local cards done
2015/07/17 20:57:56 0 s anti cascading disabled
Server Sender Log
Bitte nicht wundern. Hatte die 1843 als Caid vergessen, deshalb fragt er nur die skyde ab. Hab ich korrigiert. Aber was will mir "paired" sagen, wo die Karte noch nie irgendwo aktiv war. Ist das normal, wenn die Karte noch jungfräulich ist und noch keine Freischaltung beantragt wurde?
- 2015/07/17 21:16:35 1119858 c encrypted cccam-client 192.168.xx.xx granted (driv3r, au=on (2 reader))
- 2015/07/17 21:16:46 10AF3D0 r skyde [videoguard2] classD3 ins54: no cw --> Card isn't active
- 2015/07/17 21:16:46 10AF3D0 r skyde [videoguard2] classD3 ins54: no cw --> Card is paired
- 2015/07/17 21:16:46 1119858 c driv3r (098C&000000/0641/EF10/98:5FDFCC2B9D16563DF88D36B0A043F80E): not found (51 ms) by skyde - RTL HD
- 2015/07/17 21:16:58 1119858 c skyde [videoguard2] driv3r emmtype=global, len=44, idx=0, cnt=1: blocked (0 ms)
- 2015/07/17 21:17:09 1119858 c skyde [videoguard2] driv3r emmtype=global, len=32, idx=0, cnt=2: blocked (0 ms)
- 2015/07/17 21:17:21 1119858 c skyde [videoguard2] driv3r emmtype=global, len=39, idx=0, cnt=3: blocked (0 ms)
- 2015/07/17 21:17:34 1119858 c skyde [videoguard2] driv3r emmtype=global, len=32, idx=0, cnt=4: blocked (0 ms)
- 2015/07/17 21:17:45 1119858 c skyde [videoguard2] driv3r emmtype=global, len=41, idx=0, cnt=5: blocked (0 ms)
- 2015/07/17 21:17:46 10AF3D0 r skyde [videoguard2] classD3 ins54: no cw --> Card isn't active
- 2015/07/17 21:17:46 10AF3D0 r skyde [videoguard2] classD3 ins54: no cw --> Card is paired
- 2015/07/17 21:17:46 1119858 c driv3r (098C&000000/0641/EF10/98:CE3EAFD4C5A3B75BE08718E808F036E0): not found (51 ms) by skyde - RTL HD
- 2015/07/17 21:17:57 1119858 c skyde [videoguard2] driv3r emmtype=global, len=32, idx=0, cnt=6: blocked (0 ms)
- 2015/07/17 21:18:07 1119858 c skyde [videoguard2] driv3r emmtype=global, len=49, idx=0, cnt=7: blocked (0 ms)
- 2015/07/17 21:19:08 1119858 c driv3r disconnected from 192.168.xx.xx
Daaaaankeee
Zuletzt bearbeitet: