v14 mit Easymouse an 7170 - card system not supported - wer hat Rat?

[V13-Oscam]

Hallo,

ich versuche mich mal wieder an einer 7170. Die neu erhaltene v14 will daran noch nicht so wirklich in der Easymouse2 laufen. Vielleicht hat einer von euch noch eine Idee.

Folgende Config hab ich momentan:

oscam.conf

Spoiler

[global]logfile =
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 1000
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5


[webif]
httpport = 83
httpuser =
httppwd =
httprefresh = 4
httpallowed = 0.0.0.0-192.168.178.200
httpdyndns =
httphideidleclients = 0
httphelplang = de


[dvbapi]
enabled = 1
au = 0
boxtype = dreambox
user = dvbapi
pmt_mode = 0
request_mode = 0


[cccam]
port = xxx
reshare = 1
keepconnected = 0
forward_origin_card = 0
ignorereshare = 0
minimizecards = 0
stealth = 0
reshare_mode = 0
updateinterval = 240

oscam.server

Spoiler

[reader]label = v14
protocol = mouse
#protocol = smartreader
device = /dev/ttyUSB0
#device = Serial:Reader A400ZGET
caid = 098C
boxid = xxx
ins7e11 = 15
ndsversion = 2
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2

So wird die Karte momentan "erkannt":

Spoiler

2014/02/13 16:05:24 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9474 (mipsel-linux-uclibc-libusb)
2014/02/13 16:05:24 0 s creating pidfile /var/run/oscam.pid with pid 3957
2014/02/13 16:05:24 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2014/02/13 16:05:24 0 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
2014/02/13 16:05:24 0 s signal handling initialized
2014/02/13 16:05:24 0 s 116 service-id's loaded in 9ms
2014/02/13 16:05:24 0 s 116 tier-id's loaded
2014/02/13 16:05:24 0 s 3 provid's loaded
2014/02/13 16:05:24 0 s 22 lengths for caid guessing loaded
2014/02/13 16:05:24 0 s cccam: initialized (fd=5, port=45500)
2014/02/13 16:05:24 0 s v14 [mouse] creating thread for device /dev/ttyUSB0
2014/02/13 16:05:24 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/02/13 16:05:24 0 s waiting for local card init
2014/02/13 16:05:24 5006D8 h webif: decompressed 68884 bytes back into 194152 bytes
2014/02/13 16:05:24 5006D8 h HTTP Server running. ip=0.0.0.0 port=83
2014/02/13 16:05:24 4FE9D8 r v14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/02/13 16:05:25 4FE9D8 r v14 [mouse] card detected
2014/02/13 16:05:26 4FE9D8 r v14 [mouse] ATR:
2014/02/13 16:05:26 4FE9D8 r v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/02/13 16:05:26 4FE9D8 r v14 [mouse] Setting baudrate to 38400 bps
2014/02/13 16:05:26 4FE9D8 r v14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
2014/02/13 16:05:26 4FE9D8 r v14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/02/13 16:05:30 4FE9D8 r v14 [mouse] card system not supported
2014/02/13 16:05:30 4FE9D8 r v14 [mouse] Normal mode failed, reverting to Deprecated Mode
2014/02/13 16:05:32 4FE9D8 r v14 [mouse] ATR:
2014/02/13 16:05:32 4FE9D8 r v14 [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2014/02/13 16:05:32 4FE9D8 r v14 [mouse] Init card protocol T3, FI=1, F=372, D=1, N=63
2014/02/13 16:05:32 4FE9D8 r v14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/02/13 16:05:32 4FE9D8 r v14 [mouse] ERROR: Parse_ATR returned error
2014/02/13 16:05:32 4FE9D8 r v14 [mouse] Error activating card.
2014/02/13 16:05:33 4FE9D8 r v14 [mouse] ATR:
2014/02/13 16:05:33 4FE9D8 r v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/02/13 16:05:33 4FE9D8 r v14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/02/13 16:05:34 4FE9D8 r v14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/02/13 16:05:38 4FE9D8 r v14 [mouse] card system not supported
2014/02/13 16:05:38 4FE9D8 r v14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/02/13 16:05:38 4FE9D8 r v14 [mouse] card initializing error
2014/02/13 16:05:38 0 s init for all local cards done
2014/02/13 16:05:38 0 s anti cascading disabled ​

 

[night.knight]

AW: v14 mit Easymouse an 7170 - card system not supported - wer hat Rat?

Vielleicht hilft dir https://www.digital-eliteboard.com/showthread.php?312005-V14-Pairing-aktiviert weiter

 

[V13-Oscam]

AW: v14 mit Easymouse an 7170 - card system not supported - wer hat Rat?

Nein kann nicht sein, da die v14 in einem Xtrend ET-4000 mit Oscam ohne Probleme läuft.

 

[night.knight]

AW: v14 mit Easymouse an 7170 - card system not supported - wer hat Rat?

Ah ok. Hat sich anders gelesen. Hat deine Oscam NDS Support? (oscam.version)

 

[t0x1cal]

AW: v14 mit Easymouse an 7170 - card system not supported - wer hat Rat?

Hi,

wie hast du denn die Easymouse juper gesetzt? Phonix, 3,3 Volt und 3,58Mhz?

https://www.digital-eliteboard.com/...stellungen-der-Easymouse2-mit-cccam-amp-oscam