Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

V14 liegt unberührt neben dem Receiver.

AW: V14 blocken - Noob Anleitung

auch nachdem neustart erhalte ich " ERROR
Sie müssen registriert sein, um Links zu sehen.
"

  • 2015/06/14 21:09:21 BCD9E0 r (reader) V14 [internal] Card type: P1TV
  • 2015/06/14 21:09:21 BCD9E0 r (reader) V14 [internal] Rom version: 20AA
  • 2015/06/14 21:09:21 BCD9E0 r (reader) V14 [internal] Credit available on card: 0 euro
  • 2015/06/14 21:09:21 BCDEB0 r (reader) hdplus1 [internal] detect native nagra card
  • 2015/06/14 21:09:21 BCD9E0 r (reader) V14 [internal] classD0 ins36: encrypted - can't parse
  • 2015/06/14 21:09:21 BCD9E0 r (reader) V14 [internal] no boxID available
  • 2015/06/14 21:09:21 BCD9E0 r (reader) V14 [internal] card system not supported
  • 2015/06/14 21:09:21 BCD9E0 r (reader) V14 [internal] Normal mode failed, reverting to Deprecated Mode
  • 2015/06/14 21:09:22 BCDEB0 r (reader) hdplus1 [internal] ready for requests
  • 2015/06/14 21:09:22 BCDEB0 r (reader) hdplus1 [internal] found card system nagra

Den boxkey habe ich unverändert übernommen
 
AW: V14 blocken - Noob Anleitung

Zeige mal das log von Start an bis zum Verbinden des Clienten
 
AW: V14 blocken - Noob Anleitung

  • 2015/06/14 21:09:22 BCDEB0 r (reader) hdplus1 [nagra] +----+--------+------------+------------+
  • 2015/06/14 21:09:22 BCDEB0 r (reader) hdplus1 [nagra] |8011|0BEA |2013/04/14 |2016/07/07 |
  • 2015/06/14 21:09:22 BCDEB0 r (reader) hdplus1 [nagra] |8011|0064 |2012/04/14 |2013/04/15 |
  • 2015/06/14 21:09:22 BCDEB0 r (reader) hdplus1 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
  • 2015/06/14 21:09:22 BCDEB0 r (reader) hdplus1 [nagra] -----------------------------------------
  • 2015/06/14 21:09:23 BCD9E0 r (reader) V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2015/06/14 21:09:23 BCD9E0 r (reader) V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
  • 2015/06/14 21:09:23 BCD9E0 r (reader) V14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
  • 2015/06/14 21:09:23 BCD9E0 r (reader) V14 [internal] Buffers readed 0 bytes total time_us 75217
  • 2015/06/14 21:09:24 BCD9E0 r (reader) V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/06/14 21:09:27 BCD9E0 r (reader) V14 [internal] card system not supported
  • 2015/06/14 21:09:27 BCD9E0 r (reader) V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2015/06/14 21:09:27 BCD9E0 r (reader) V14 [internal] card initializing error
  • 2015/06/14 21:09:28 0 s (main) init for all local cards done
  • 2015/06/14 21:09:28 0 s (anticasc) ERROR: Can't open anti cascading logfile: /var/logs/oscam/aclog.log (errno=2 No such file or directory)
  • 2015/06/14 21:09:28 BE4850 c (serial) serial: initialized (auto@/dev/ttyS0)
  • 2015/06/14 21:09:28 BE4E90 c (client) plain dvbapi-client granted (Dream800, au=auto (2 reader))
  • 2015/06/14 21:09:28 BE5CD0 c (client) anonymous disconnected from 192.168.0.3
  • 2015/06/14 21:09:28 BE4E90 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
  • 2015/06/14 21:09:28 BE4E90 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
  • 2015/06/14 21:09:29 BE4E90 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 1833 ECM_PID: 180F PROVID: 000000
  • 2015/06/14 21:09:29 BE4E90 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 09C4 ECM_PID: 1B0F PROVID: 000000
  • 2015/06/14 21:09:29 BE4E90 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 09AF ECM_PID: 1F0F PROVID: 000000
  • 2015/06/14 21:09:29 BE4E90 c (dvbapi) Demuxer 0 added new ecmpid 3 CAID: 098C ECM_PID: 1A0F PROVID: 000000
  • 2015/06/14 21:09:29 BE4E90 c (dvbapi) Demuxer 0 found 4 ECMpids and 4 STREAMpids in PMT
  • 2015/06/14 21:09:29 BE4E90 c (dvbapi) Demuxer 0 receiver wants to demux srvid 006C on adapter 0000 camask 0008 index 0003 pmtpid 0063
  • 2015/06/14 21:09:29 BE4E90 c (dvbapi) Demuxer 0 new program number: 006C (1702:006C unknown) [pmt_list_management 3]
  • 2015/06/14 21:09:29 BE4E90 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
  • 2015/06/14 21:09:32 BE4E90 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/06/14 21:09:33 BD10D0 c (client) encrypted cccam-client 192.168.0.3 granted (Dream500, au=auto (2 reader))
  • 2015/06/14 21:09:35 BE4E90 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/06/14 21:10:22 BE5CD0 c (-) -- Skipped 15 duplicated log lines --
  • 2015/06/14 21:10:22 BE5CD0 c (client) encrypted cccam-client 92.196.67.60 granted (Atemio, au=off)
  • 2015/06/14 21:10:23 BE4E90 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
 
AW: V14 blocken - Noob Anleitung

Zeig mal die configs noch mal die du jetzt hast
 
AW: V14 blocken - Noob Anleitung

Oscam.server
[reader]
label = V14
description = V14
protocol = internal
device = /dev/sci1
autospeed = 1
showcls = 0
caid = 098C
boxkey = 1122XX44XX667788
ins7e11 = 15
ecmwhitelist = 89,93
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
brauchst du noch andere?
 
AW: V14 blocken - Noob Anleitung

[reader]
label = V14
protocol = internal
device = /dev/sci1
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2
Übernimm das mal und neu starten und berichten
Karte im unteren Schacht!
 
AW: V14 blocken - Noob Anleitung

der sollte so aussehen
rohri der sci1

und poste mal die oscam.user und oscam.conf


#oscam.server




[reader]
label = v14
description = V14-Sky
protocol = internal
device = /dev/sci1
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = CD
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2
 
AW: V14 blocken - Noob Anleitung

  • 2015/06/14 21:22:32 BE4608 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 3 disabled ecmpids!
  • 2015/06/14 21:22:32 BE4608 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 098C PROVID 000000 ECMPID 1A0F ANY CHID PMTPID 0063 VPID 03FF
  • 2015/06/14 21:22:39 BE4138 r (reader) v14 [videoguard2] classD3 ins54: no cw --> Card isn't active
  • 2015/06/14 21:22:39 BE4138 r (reader) v14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
  • 2015/06/14 21:22:39 BE4138 r (reader) v14 [videoguard2] classD3 ins54: no cw --> No tier found
  • 2015/06/14 21:22:39 BE4138 r (reader) v14 [videoguard2] classD3 ins54: no cw --> Tier expired

lasse mir das Signal nochmal schicken, kann sein, dass es deswegen nicht funzt

jetzt steht zumindest CARDOK....
 
Zuletzt bearbeitet:
AW: V14 blocken - Noob Anleitung

sonst übernimm diese configs

du brauchst kein signal mehr
logge erstmal

-----------------------------------------------------------------------------------


#oscam.conf


[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
logfile = /var/log/oscam.log
maxlogsize = 10
Level = 15
saveinithistory = 1






[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
pmt_mode = 0


[cccam]
port = 12000
reshare = 2
version = 2.1.3


[webif]
httpport = 15000
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
aulow = 120
appendchaninfo = 1


[monitor]
monlevel = 4
appendchaninfo = 1
----------------------------------------------------------------------------------------


#oscam.server




[reader]
label = v14
description = V14-Sky
protocol = internal
device = /dev/sci1
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = CD
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2






-------------------------------------------------------------------------------








#oscam.user


[account]
user = local
caid = 098C
au = v14
group = 1


[account]
user = user1
pwd = pass1
group = 1
au = 0
caid = 098C




[account]
user = user2
pwd = pass2
group = 1
au = 0
caid = 098C
 
AW: V14 blocken - Noob Anleitung

@dia hatte ich schon geändert du hast aber den group noch vergessen = 2 :wacko1:
 
AW: V14 blocken - Noob Anleitung

@Rohrby
group = 2 anstatt (1)
 
AW: V14 blocken - Noob Anleitung

Das kommt darauf an was du deinem User gibst der au machen soll. Übernimm am besten die configs von dia oder zeige uns mal oscam.conf oscam.user und oscam.server komplett wie du die jetzt hast
 
AW: V14 blocken - Noob Anleitung

Oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10653
# Read more:
Sie müssen registriert sein, um Links zu sehen.


[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
logfile = /var/log/oscam.log
maxlogsize = 10
Level = 15
saveinithistory = 1

[anticasc]
enabled = 1
numusers = 1
samples = 5
penalty = 1
aclogfile = /var/logs/oscam/aclog.log
denysamples = 4

[cache]

[cs378x]
port = 3000030001@0200:FFF000,FFFF0030002

[newcamd]
port = 12345@1830:000000
key = 01020304XXXX08091011121314

[radegast]
port = 20000
allowed = 192.168.0.0-192.168.255.255
user = user1

[serial]
device = user2@/dev/ttyS0?delay=1&timeout=300

[cccam]
port = 12000
reshare = 2
version = 2.1.3

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
pmt_mode = 0

[monitor]
port = 988
aulow = 120
monlevel = 4
appendchaninfo = 1
hideclient_to = 15

[webif]
httpport = 83
httpuser = oscam
httppwd = oscam
httprefresh = 30
httpallowed = 127.0.0.1,192.168.0.0-192.168.0.255
aulow = 120
hideclient_to = 15

User
[account]
user = local
caid = 098C
au = v14
group = 1
[account]
user = dvbapi
pwd = dvbapi
group = 1
au = 1

betatunnel = 1833.FFFF:1702
numusers = 1
penalty = 1

[account]
user = user1
pwd = pass1
group = 1
au = 0
caid = 098C




[account]
user = user2
pwd = pass2
group = 1
au = 0
caid = 098C

Reader
[reader]
label = v14
description = V14-Sky
protocol = internal
device = /dev/sci1
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = CD
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = hdplus1
protocol = internal
device = /dev/sci0
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461XXXXC933FB541X1BF3B3ECC9AD66XXXX3A962X168EF09EXXC5CCA4DD5
ecmwhitelist = 92
detect = cd
mhz = 540
cardmhz = 2700
group = 1
emmcache = 1,3,2,0
lb_weight = 300
 
Zuletzt bearbeitet:
AW: V14 blocken - Noob Anleitung

Den Usern noch die group 2 geben dann sollte es laufen
 
AW: V14 blocken - Noob Anleitung

.

So siehts jetzt aus,bisher noch dunkel

irgendwie komisch... No statistics found - Reader exist and active? (LOCAL)
 
Zuletzt bearbeitet:
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

  • Artikel Artikel
IPTV „Viele illegale IPTV-Anbieter sind unsicher!“ Ein Aussteiger im Gespräch
2
Antworten
17
Aufrufe
55K
FräuleinGisela
T
dvbapiNET - mdvbapi Nachfolge
20 21 22
Antworten
325
Aufrufe
130K
twicko
T
G
habe mich schon viel mit meiner neuen v14 Karte beschäftigt
4 5 6
Antworten
89
Aufrufe
8K
name007
  • Artikel Artikel
Handy - Navigation Handysucht bekämpfen Tipps und Tricks, wenn das Handy zu wichtig wird
Antworten
3
Aufrufe
4K
Alfred_ML
A
H
Einmal V14 verlängern, zweimal V14 aktivieren
2
Antworten
25
Aufrufe
3K
mkl1000
M
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…