V14 Karte läuft nicht mit Oscam 10077

[rappschra]

Hallo Freunde,

bekomme meine V14 Karte im internen Reader der VU+Solo2 nicht ans laufen´, hab mal meine Konfig´s angehangen.


oscam.user

Spoiler

[account]
user = local
au = v14
group = 1

oscam.server

Spoiler

[reader]
label = v14
protocol = internal
device = /dev/sci0
services = sky
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,FFFFFFFF
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2
[reader]
label = hd01
protocol = internal
device = /dev/sci1
caid = 1830
boxkey =
rsakey =
ecmwhitelist = 1830:92
detect = cd
mhz = 369
cardmhz = 368
ident = 1830:000000,003411,008011
group = 1
emmcache = 1,3,2
auprovid = 003411

oscam.conf

Spoiler

[global]
logfile = /tmp/oscam.log
nice = -1
maxlogsize = 1500
preferlocalcards = 1
emmlogdir =

[cache]
[cs357x]
port = 4567
[cccam]
port = 21029
nodeid = 1F933151105613CE
version = 2.3.0
reshare = 2
forward_origin_card = 1
[dvbapi]
enabled = 1
au = 1
delayer = 1
user = local
boxtype = dreambox
[monitor]
port = 988
aulow = 120
monlevel = 1
hideclient_to = 15
[webif]
httpport = 8088
httpuser = oscam
httppwd = user
httprefresh = 10
httpshowecminfo = 1
httpallowed = 192.168.0.0-192.168.255.255
aulow = 120
httpsavefullcfg = 0
httpreadonly = 0
hideclient_to = 15

Gruß
rappschra

 

[pehedima]

AW: V14 Karte läuft nicht mit Oscam 10077

Poste bitte die oscam.log vom oscam start an bis zum Client-Zugriff/Fehler.

Probiere mal folgendes im V14 Reader:

ins7e11 = 13

Danach oscam neu starten.

 

[rappschra]

AW: V14 Karte läuft nicht mit Oscam 10077

Was bewirkt dieser Eintrag?
Sind die config´s sonst O.K?
Kann jetzt nicht loggen, bin auf Arbeit.

Gruß

rappschra

 

[supraracer]

AW: V14 Karte läuft nicht mit Oscam 10077

autospeed = 1
beim V14 Reader einfügen.

Löschen:
ecmwhitelist = 098C:98,9B,97,57,FFFFFFFF

OScam neu starten und mal das Log posten, damit man sieht ob die Karte eingelesen wird.

-supraracer

 

[rappschra]

AW: V14 Karte läuft nicht mit Oscam 10077

Danke!!
Wie ist das mit den Einträgen:

mhz = 450
cardmhz = 2700
sin die richtig?

rappschra

 

[supraracer]

AW: V14 Karte läuft nicht mit Oscam 10077

Ja die sind korrekt bei der VU.

-supraracer

 

[rappschra]

AW: V14 Karte läuft nicht mit Oscam 10077

Hier mein Logfile, weiß nicht weiter !!!!

Spoiler

2015/06/29 18:53:56 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:53:56 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:53:57 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:53:57 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:53:57 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:53:58 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:53:58 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:53:58 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:53:58 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:53:59 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:53:59 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:53:59 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:00 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:00 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:00 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:01 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:01 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:01 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:01 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:02 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:02 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:02 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:03 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:03 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:03 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:04 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:04 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:04 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:04 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:05 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:05 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:05 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:06 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:06 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:06 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:07 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:07 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:07 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:07 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:08 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:08 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:08 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:09 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:09 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:09 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:10 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:10 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:10 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:10 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:11 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:11 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:11 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:12 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:12 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:12 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:13 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:13 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:13 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:14 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/06/29 18:54:14 5704F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/29 18:54:14 5704F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0B PMTPID 0062 (NO MATCHING READER)
2015/06/29 18:54:14 5704F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!

 

[Pilot]

AW: V14 Karte läuft nicht mit Oscam 10077

oscam neu starten.
Dann den Log liefern, wie die Karte eingelesen wird.

 

[rappschra]

AW: V14 Karte läuft nicht mit Oscam 10077

Hier ein neuer Log:

Spoiler

2015/06/30 09:13:38 564780 r v14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/06/30 09:13:39 564780 r v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/06/30 09:13:44 564780 r v14 [internal] Warning: Card returned error on setting ifsd value to 251
2015/06/30 09:13:45 564780 r v14 [internal] detect native nagra card
2015/06/30 09:13:47 566590 r hd01 [internal] card system not supported
2015/06/30 09:13:47 566590 r hd01 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/06/30 09:13:47 566590 r hd01 [internal] card initializing error
2015/06/30 09:13:49 564780 r v14 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/06/30 09:13:53 564780 r v14 [internal] T1 Resync command error, trying to reactivate!
2015/06/30 09:13:57 564780 r v14 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/06/30 09:13:57 564780 r v14 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/06/30 09:13:57 564780 r v14 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/06/30 09:13:57 564780 r v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2015/06/30 09:13:57 564780 r v14 [internal] Card responded ok for ifsd request of 251
2015/06/30 09:13:58 564780 r v14 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2015/06/30 09:13:58 564780 r v14 [internal] card system not supported
2015/06/30 09:13:58 564780 r v14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/06/30 09:13:58 564780 r v14 [internal] card initializing error
2015/06/30 09:13:59 0 s init for all local cards done
2015/06/30 09:13:59 0 s anti cascading disabled
2015/06/30 09:13:59 56FF48 c plain dvbapi-client granted (local, au=on (1 reader))
2015/06/30 09:13:59 56FF48 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/06/30 09:14:03 56FF48 c [NEW ECMPID #0] CAID: 1702 ECM_PID: 1722 PROVID: 000000
2015/06/30 09:14:03 56FF48 c [NEW ECMPID #1] CAID: 1833 ECM_PID: 1822 PROVID: 000000
2015/06/30 09:14:03 56FF48 c [NEW ECMPID #2] CAID: 09C4 ECM_PID: 1B22 PROVID: 000000
2015/06/30 09:14:03 56FF48 c [NEW ECMPID #3] CAID: 09AF ECM_PID: 1F22 PROVID: 000000
2015/06/30 09:14:03 56FF48 c [NEW ECMPID #4] CAID: 098C ECM_PID: 1A22 PROVID: 000000
2015/06/30 09:14:03 56FF48 c Found 5 ECMpids and 3 STREAMpids in PMT
2015/06/30 09:14:03 56FF48 c [DVBAPI] Receiver wants to demux srvid 000D on adapter 0000 camask 0001 index 0000 pmtpid 006D
2015/06/30 09:14:03 56FF48 c New program number: 000D (Nat Geo) [pmt_list_management 3]
2015/06/30 09:14:03 56FF48 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/30 09:14:03 56FF48 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/06/30 09:14:03 56FF48 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/30 09:14:03 56FF48 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/06/30 09:14:04 56FF48 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/30 09:14:04 56FF48 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/06/30 09:14:04 56FF48 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/30 09:14:04 56FF48 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/06/30 09:14:05 56FF48 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/30 09:14:05 56FF48 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/06/30 09:14:05 56FF48 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/30 09:14:06 56FF48 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/06/30 09:14:06 56FF48 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/06/30 09:14:06 56FF48 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/06/30 09:14:07 56FF48 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

 

[pehedima]

AW: V14 Karte läuft nicht mit Oscam 10077

2015/06/30 09:13:58 564780 r v14 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey

Prüfe den rsakey und den boxkey.
Es dürfen dort keine Leerzeichen enthalten sein.

Ansonsten oscam.server posten.

 

[rappschra]

AW: V14 Karte läuft nicht mit Oscam 10077

Hier die Oscam.Server.

Gruß

rappschra

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10077
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = v14
protocol = internal
device = /dev/sci0
services = sky
caid = 098C
boxid = E125F518
ins7e11 = 13
#ecmwhitelist = 098C:98,9B,97,57,FFFFFFFF
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2autospeed = 1
[reader]
label = hd01
protocol = internal
device = /dev/sci1
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
ecmwhitelist = 1830:92
detect = cd
mhz = 369
cardmhz = 368
ident = 1830:000000,003411,008011
group = 1
emmcache = 1,3,2
auprovid = 003411

 

[pehedima]

AW: V14 Karte läuft nicht mit Oscam 10077

Nutze bitte in Zukunft unbedingt die Spoiler-Funktion beim Posten von Configs und Logs. Danke.

Nochmal:
In deinem geposteten rsakey sind Leerzeichen enthalten.
Prüfe bitte, ob die auch in der oscam.server im Reader auftauchen.

Wenn ja -> löschen!

oscam neu starten und oscam.log posten.

 

[rappschra]

AW: V14 Karte läuft nicht mit Oscam 10077

Hallo pehedima,

hab den rsakey ber der HD001in der oscam.Server per copy eingefügt, der ist riesenlang, was soll ich jeztzt machen, den rsakey löschen? und dann.

gruß

rappschra

 

[JF2707]

AW: V14 Karte läuft nicht mit Oscam 10077

rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A_23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5

da wo der rote Strich ist, ist bei Dir ein Leerzeichen vorhanden.
Diesen sollst du entfernen.

Es dürfen in dem kompletten Strang KEINE Leerzeichen sein.

Gruß

Gruß

 

[pehedima]

AW: V14 Karte läuft nicht mit Oscam 10077

Das ist noch ein Leerzeichen

Übernehme diesen Key mit Copy&Paste in deine oscam.server:

rsakey        = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5