Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

V14 in Raspberry aktivieren

    Nobody is reading this thread right now.
X

xxx1984xxx

Ist gelegentlich hier
Registriert
24. September 2009
Beiträge
48
Reaktionspunkte
0
Punkte
6
Ort
Ostfriesland
Hallo Forum,
hab mich heute an das Projekt "Umstieg von S02/Dbox2 auf V14/Raspberry Pi" gewagt und nach vielen lesen hier im Forum läuft es leider immer noch nicht.
Das Bild bleibt dunkel und auch im Log ändert sich nichts. Meine Hardware:
Raspberry Pi mit Easymouse 2 Kartenleser
V14-Karte
Dreambox

Hier meine Logs
  • 2015/02/20 12:35:41 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9921 (arm-linux-gnueabihf)
  • 2015/02/20 12:35:41 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 10595
  • 2015/02/20 12:35:41 0 s userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled
  • 2015/02/20 12:35:41 0 s signal handling initialized
  • 2015/02/20 12:35:41 0 s cs357x: initialized (fd=5, port=12345)
  • 2015/02/20 12:35:41 0 s cccam: initialized (fd=6, port=12000)
  • 2015/02/20 12:35:41 0 s cardreader [mouse] creating thread for device /dev/ttyUSB0
  • 2015/02/20 12:35:41 0 s loadbalancer: can't read from file /tmp/.oscam/stat
  • 2015/02/20 12:35:41 0 s waiting for local card init
  • 2015/02/20 12:35:41 1609D30 h webif: decompressed 149826 bytes back into 364788 bytes
  • 2015/02/20 12:35:41 1609D30 h HTTP Server running. ip=0.0.0.0 port=1234
  • 2015/02/20 12:35:41 1607DE0 r cardreader [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
  • 2015/02/20 12:35:43 0 s init for all local cards done
  • 2015/02/20 12:35:43 0 s anti cascading disabled
  • 2015/02/20 12:35:43 161D6E0 c encrypted cccam-client 192.168.0.106 granted (dream106, au=on (1 reader))
  • 2015/02/20 12:37:48 1607DE0 r cardreader [mouse] card detected
  • 2015/02/20 12:37:49 1607DE0 r cardreader [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2015/02/20 12:37:49 1607DE0 r cardreader [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
  • 2015/02/20 12:37:49 1607DE0 r cardreader [mouse] Setting baudrate to 38400 bps
  • 2015/02/20 12:37:49 1607DE0 r cardreader [mouse] Calculated work ETU is 26.05 us reader mhz = 357
  • 2015/02/20 12:37:50 1607DE0 r cardreader [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
  • 2015/02/20 12:37:52 1607DE0 r cardreader [mouse] Card type: P1TV
  • 2015/02/20 12:37:52 1607DE0 r cardreader [mouse] Rom version: 20AA
  • 2015/02/20 12:37:52 1607DE0 r cardreader [mouse] Credit available on card: 0 euro
  • 2015/02/20 12:37:52 1607DE0 r cardreader [mouse] Extended 4C detected
  • 2015/02/20 12:37:52 1607DE0 r cardreader [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
  • 2015/02/20 12:37:52 1607DE0 r cardreader [mouse] found card system videoguard2
  • 2015/02/20 12:37:52 1607DE0 r cardreader [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2015/02/20 12:37:52 1607DE0 r cardreader [videoguard2] card detected
  • 2015/02/20 12:37:52 1607DE0 r cardreader [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
  • 2015/02/20 12:37:54 1607DE0 r cardreader [mouse] ATR: FF 03 40 57 5B
  • 2015/02/20 12:37:54 1607DE0 r cardreader [mouse] ERROR: Could not read reader->convention
  • 2015/02/20 12:37:54 1607DE0 r cardreader [mouse] Error activating card.
  • 2015/02/20 12:37:55 1607DE0 r cardreader [mouse] ATR: AF 00
  • 2015/02/20 12:37:55 1607DE0 r cardreader [mouse] ERROR: Could not read reader->convention
  • 2015/02/20 12:37:55 1607DE0 r cardreader [mouse] Error activating card.
  • 2015/02/20 12:37:57 1607DE0 r cardreader [mouse] ATR: FF B4 E7 57 5B BF F5 FE 0F 7D F2 AF
  • 2015/02/20 12:37:57 1607DE0 r cardreader [mouse] ERROR: Could not read reader->convention
  • 2015/02/20 12:37:57 1607DE0 r cardreader [mouse] Error activating card.
  • 2015/02/20 12:37:58 1607DE0 r cardreader [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2015/02/20 12:37:58 1607DE0 r cardreader [mouse] card initializing error
  • 2015/02/20 12:42:37 1607DE0 r cardreader [mouse] card detected
  • 2015/02/20 12:42:41 1607DE0 r cardreader [mouse] Error activating card.
  • 2015/02/20 12:42:49 0 --- Skipped 2 duplicated log lines ---
  • 2015/02/20 12:42:49 1607DE0 r cardreader [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2015/02/20 12:42:49 1607DE0 r cardreader [mouse] card initializing error

oscam.cfg

[global]
logfile = /tmp/oscam.log
nice = 1
maxlogsize = 2048
clienttimeout = 10
clientmaxidle = 160
waitforcards = 1
cachedelay = 60
[cs357x]
port = 12345
[webif]
httpport = 1234
httpuser = pi
httppwd = raspberry
httphelplang = de
httpallowed = 127.0.0.1,10.10.10.10-192.168.255.254

[cccam]
port = 12000
reshare = 1
forward_origin_card = 0
ignorereshare = 0
version = 2.1.4
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240

oscam.server

[reader]
label = cardreader
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 4
emmcache = 1,1,2
cccreshare = 0
ins7e11 = 15
ndsversion = 2

oscam.user

[account]
user = x
pwd = x
caid = 098C
au = cardreader
group = 1

cccam config auf client

C: 192.168.0.110 12000 dream106 svend
Habe das Ganze nur im Heimnetz laufen, hoffe ihr könnt mir helfen

PS: Neuer Log, er erkennt schonmal immerhin mehr

  • 2015/02/20 13:09:07 1607DE0 r cardreader [mouse] card detected
  • 2015/02/20 13:09:08 1607DE0 r cardreader [mouse] ATR: 7D F2 AF 69 00 AD F5 F0 FF FF F5 73 3F 03 40 37 5B BF
  • 2015/02/20 13:09:08 1607DE0 r cardreader [mouse] ERROR: Could not read reader->convention
  • 2015/02/20 13:09:08 1607DE0 r cardreader [mouse] Error activating card.
  • 2015/02/20 13:09:11 1607DE0 r cardreader [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2015/02/20 13:09:11 1607DE0 r cardreader [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
  • 2015/02/20 13:09:11 1607DE0 r cardreader [mouse] Setting baudrate to 38400 bps
  • 2015/02/20 13:09:11 1607DE0 r cardreader [mouse] Calculated work ETU is 26.05 us reader mhz = 357
  • 2015/02/20 13:09:11 1607DE0 r cardreader [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
  • 2015/02/20 13:09:12 1607DE0 r cardreader [mouse] Card type: P1TV
  • 2015/02/20 13:09:12 1607DE0 r cardreader [mouse] Rom version: 20AA
  • 2015/02/20 13:09:12 1607DE0 r cardreader [mouse] Credit available on card: 0 euro
  • 2015/02/20 13:09:12 1607DE0 r cardreader [mouse] Extended 4C detected
  • 2015/02/20 13:09:12 1607DE0 r cardreader [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
  • 2015/02/20 13:09:12 1607DE0 r cardreader [mouse] found card system videoguard2
  • 2015/02/20 13:09:12 1607DE0 r cardreader [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2015/02/20 13:09:12 1607DE0 r cardreader [videoguard2] card detected
  • 2015/02/20 13:09:12 1607DE0 r cardreader [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
  • 2015/02/20 13:09:14 1607DE0 r cardreader [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2015/02/20 13:09:14 1607DE0 r cardreader [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
  • 2015/02/20 13:09:14 1607DE0 r cardreader [mouse] Setting baudrate to 153600 bps
  • 2015/02/20 13:09:14 1607DE0 r cardreader [mouse] Calculated work ETU is 6.51 us reader mhz = 357
  • 2015/02/20 13:09:14 1607DE0 r cardreader [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
  • 2015/02/20 13:09:15 1607DE0 r cardreader [mouse] Card type: P1TV
  • 2015/02/20 13:09:15 1607DE0 r cardreader [mouse] Rom version: 20AA
  • 2015/02/20 13:09:15 1607DE0 r cardreader [mouse] Credit available on card: 0 euro
  • 2015/02/20 13:09:15 1607DE0 r cardreader [mouse] Extended 4C detected
  • 2015/02/20 13:09:15 1607DE0 r cardreader [mouse] FuseByte: 00
  • 2015/02/20 13:09:15 1607DE0 r cardreader [mouse] Region Code:
  • 2015/02/20 13:09:15 1607DE0 r cardreader [mouse] Country Code: DEU
  • 2015/02/20 13:09:15 1607DE0 r cardreader [mouse] Pincode read: 5740
  • 2015/02/20 13:09:15 1607DE0 r cardreader [mouse] PCB settings: FF FF FF FF
  • 2015/02/20 13:09:15 1607DE0 r cardreader [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
  • 2015/02/20 13:09:15 1607DE0 r cardreader [mouse] serial: ########, BoxID: ########, baseyear: 2004
  • 2015/02/20 13:09:15 1607DE0 r cardreader [mouse] ready for requests
  • 2015/02/20 13:09:15 1607DE0 r cardreader [mouse] found card system videoguard2
  • 2015/02/20 13:09:15 1607DE0 r cardreader [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2015/02/20 13:09:15 1607DE0 r cardreader [videoguard2] card detected
  • 2015/02/20 13:09:15 1607DE0 r cardreader [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
 
Zuletzt bearbeitet von einem Moderator:
AW: V14 in Raspberry aktivieren

hi,
die Karte wird auch nicht eingelesen
wie ist die Easymouse eingestellt?
wie stark ist dein Netzteil am PI?

aber zuerst
wieso blockst du nicht die EMM, ist dir das Pairing nicht bekannt
 
AW: V14 in Raspberry aktivieren

Hallo,
easymouse steht auf 3,3V Phoenix 3,579 Mhz
Die Werte für den Server hab ich aus nem Beitrag von dir kopiert, der ist allerdings schon ein Jahr alt.
Würde so einer .server gehen?

[reader]
label = cardreader
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
detect = cd
nagra_read = 0
mhz = 357
cardmhz = 357
group = 4
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 0
blockemm-g = 0
blockemm-s = 0
saveemm-u = 1
saveemm-g = 0
saveemm-s = 0
blockemm-bylen = 0
cccreshare = 0
ndsversion = 2
ins7e11 = 15
ndsversion = 2
 
AW: V14 in Raspberry aktivieren

nein
wenn dann so:
[reader]
label = cardreader
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
detect = cd
nagra_read = 0
mhz = 600
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1
blockemm-s = 1
saveemm-u = 1
cccreshare = 0
ndsversion = 2
ins7e11 = 15
ndsversion = 2
die Group auf 1 umstellen, der User hat ja auch nur Zugriff auf diese
die MHZ auf 600, dazu die Easymouse auf
3,3V Phoenix Pfeil 6MHZ
starte OScam dann neu
log posten

wie stark ist das Netzteil vom PI?
der Reader ist direkt angeschlossen, oder?
 
AW: V14 in Raspberry aktivieren

Das Netzteil hat 1,2A, der Reader ist driekt angeschlossen.



  • 2015/02/20 13:20:17 1B1DE0 r cardreader [mouse] card detected
  • 2015/02/20 13:20:20 1B1DE0 r cardreader [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2015/02/20 13:20:20 1B1DE0 r cardreader [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
  • 2015/02/20 13:20:20 1B1DE0 r cardreader [mouse] Setting baudrate to 38400 bps
  • 2015/02/20 13:20:20 1B1DE0 r cardreader [mouse] Calculated work ETU is 15.50 us reader mhz = 600
  • 2015/02/20 13:20:20 1B1DE0 r cardreader [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2015/02/20 13:20:21 1B1DE0 r cardreader [mouse] Card type: P1TV
  • 2015/02/20 13:20:21 1B1DE0 r cardreader [mouse] Rom version: 20AA
  • 2015/02/20 13:20:21 1B1DE0 r cardreader [mouse] Credit available on card: 0 euro
  • 2015/02/20 13:20:21 1B1DE0 r cardreader [mouse] Extended 4C detected
  • 2015/02/20 13:20:21 1B1DE0 r cardreader [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
  • 2015/02/20 13:20:21 1B1DE0 r cardreader [mouse] found card system videoguard2
  • 2015/02/20 13:20:21 1B1DE0 r cardreader [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2015/02/20 13:20:21 1B1DE0 r cardreader [videoguard2] card detected
  • 2015/02/20 13:20:21 1B1DE0 r cardreader [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
  • 2015/02/20 13:20:22 1B1DE0 r cardreader [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2015/02/20 13:20:22 1B1DE0 r cardreader [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
  • 2015/02/20 13:20:22 1B1DE0 r cardreader [mouse] Setting baudrate to 153600 bps
  • 2015/02/20 13:20:22 1B1DE0 r cardreader [mouse] Calculated work ETU is 3.88 us reader mhz = 600
  • 2015/02/20 13:20:22 1B1DE0 r cardreader [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2015/02/20 13:20:23 1B1DE0 r cardreader [mouse] Card type: P1TV
  • 2015/02/20 13:20:23 1B1DE0 r cardreader [mouse] Rom version: 20AA
  • 2015/02/20 13:20:23 1B1DE0 r cardreader [mouse] Credit available on card: 0 euro
  • 2015/02/20 13:20:23 1B1DE0 r cardreader [mouse] Extended 4C detected
  • 2015/02/20 13:20:23 1B1DE0 r cardreader [mouse] FuseByte: 00
  • 2015/02/20 13:20:23 1B1DE0 r cardreader [mouse] Region Code:
  • 2015/02/20 13:20:23 1B1DE0 r cardreader [mouse] Country Code: DEU
  • 2015/02/20 13:20:24 1B1DE0 r cardreader [mouse] Pincode read: 5740
  • 2015/02/20 13:20:24 1B1DE0 r cardreader [mouse] PCB settings: FF FF FF FF
  • 2015/02/20 13:20:24 1B1DE0 r cardreader [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
  • 2015/02/20 13:20:24 1B1DE0 r cardreader [mouse] serial: ########, BoxID: ########, baseyear: 2004
  • 2015/02/20 13:20:24 1B1DE0 r cardreader [mouse] ready for requests
  • 2015/02/20 13:20:24 1B1DE0 r cardreader [mouse] found card system videoguard2
  • 2015/02/20 13:20:24 1B1DE0 r cardreader [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2015/02/20 13:20:24 1B1DE0 r cardreader [videoguard2] card detected
  • 2015/02/20 13:20:24 1B1DE0 r cardreader [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
  • 2015/02/20 13:20:26 0 s init for all local cards done
  • 2015/02/20 13:20:26 0 s anti cascading disabled
  • 2015/02/20 13:20:26 1CA6F8 c encrypted cccam-client 192.168.0.106 granted (dream106, au=on (1 reader))
  • 2015/02/20 13:20:29 1B1DE0 r cardreader [videoguard2] classD3 ins54: no cw --> Card isn't active
  • 2015/02/20 13:20:29 1B1DE0 r cardreader [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
  • 2015/02/20 13:20:29 1B1DE0 r cardreader [videoguard2] classD3 ins54: no cw --> No tier found
  • 2015/02/20 13:20:29 1B1DE0 r cardreader [videoguard2] classD3 ins54: no cw --> Tier expired
  • 2015/02/20 13:20:29 1CA6F8 c dream106 (098C&000000/0068/0011/98:2A0EFFEA5803A573CED790F9374B4742): not found (91 ms) by cardreader
 
AW: V14 in Raspberry aktivieren

Moin.

Die Karte wird erkannt. Welcher Client soll dir die EMMs liefern.


Grüße
Bombadil

Tapa-Talking by Eifön
 
AW: V14 in Raspberry aktivieren

Hallo,
ich habe im Moment nur einen Client dran (Dreambox).
Habe mir grad ein neues Freischaltsignal angefordert, mal gucken was passier.
Bekomme aber jedes mal diese Meldung:

2015/02/20 13:20:29 1CA6F8 c dream106 (098C&000000/0068/0011/98:2A0EFFEA5803A573CED790F9374B4742): not found (91 ms) by cardreader

Ist das normal?
 
AW: V14 in Raspberry aktivieren

Das ist normal. Die Karte kann noch nicht antworten, da nicht aktiviert.

Passen die Au Einstellungen von Server und Client?


Grüße
Bombadil

Tapa-Talking by Eifön
 
AW: V14 in Raspberry aktivieren

Bei der Dream hab ich in der oscam.user au auf cardreader bei den anderen clients, die noch folgen sollen auf 0
 
AW: V14 in Raspberry aktivieren

Hi, die Dreambox läuft mit welchem Cam? CCcam oder OScam?


Grüße
Bombadil

Tapa-Talking by Eifön
 
AW: V14 in Raspberry aktivieren

Hi,

zeige noch mal eben die aktuellen Configs auf dem Raspi

oscam.server
oscam.conf
oscam.user

Grüße
Bombadil
 
AW: V14 in Raspberry aktivieren

oscam.conf
[global]
logfile = /tmp/oscam.log
nice = 1
maxlogsize = 2048
clienttimeout = 10
clientmaxidle = 160
waitforcards = 1
cachedelay = 60
[cs357x]
port = 12345
[webif]
httpport = 1234
httpuser = pi
httppwd = raspberry
httphelplang = de
httpallowed = 127.0.0.1,10.10.10.10-192.168.255.254

[cccam]
port = 12000
reshare = 1
forward_origin_card = 0
ignorereshare = 0
version = 2.1.4
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240

oscam.server
[reader]
label = cardreader
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
detect = cd
nagra_read = 0
mhz = 600
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1
blockemm-s = 1
saveemm-u = 1
cccreshare = 0
ndsversion = 2
ins7e11 = 15
ndsversion = 2

oscam.user
[account]
user = dbox1
pwd = xxx
caid = 098C
au = 0
group = 1

[account]
user = dbox2
pwd = xxx
caid = 098C
au = 0
group = 1

[account]
user = dbox3
pwd = xxx
caid = 098C
au = 0
group = 1

[account]
user = dbox4
pwd = xxx
caid = 098C
au = 0
group = 1

[account]
user = dbox5
pwd = xxx
caid = 098C
au = 0
group = 1

[account]
user = dbox9
pwd = xxx
caid = 098C
au = 0
group = 1

[account]
user = dream106
pwd = xxx
caid = 098C
au = cardreader
group = 1

- - - - - - - - - -

C-Line:
C: 192.168.0.110 12000 dream106 xxx
 
AW: V14 in Raspberry aktivieren

Das passt soweit, falls ich nichts übersehen habe.

Ist die Draem connected? Die Datei cardreader_unique_emm.log solltest du dann bei deinen Oscam Konfig Dateien finden.

Grüße
Bombadil
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

B
gelöst ORF Karte Fehlermeldung
2
Antworten
18
Aufrufe
2K
buzzard
B
G
Sat IPTV Heimnetz aufbau
Antworten
14
Aufrufe
4K
Phantom
W
gelöst OSCAM ORF Anfänger-Probleme
2
Antworten
24
Aufrufe
3K
tom00tom
P
gelöst Easymouse defekt? HD02 läuft in VU+ , aber nicht über Pi und Easymouse
Antworten
3
Aufrufe
1K
prozi
P
Oscam im Raspberry Pi - Umstellung von V14 auf V13
Antworten
2
Aufrufe
1K
RuckZuck
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…