V14 Freetz OSCAM - Dreambox - Aktivierung

[Blackmen]

Hallo, folgende einstellungen wurden gemacht

OSCAM Server settings >

Spoiler

oscam.config

[global]
loghistorysize = 8000
serverip = 192.168.178.44
logfile = /var/media/ftp/uStor01/addon/oscam/oscam.log
fallbacktimeout = 2000
nice = -1
maxlogsize = 100
preferlocalcards = 2
cwlogdir = 0
emmlogdir = /var/media/ftp/uStor01/addon/oscam/
resolvegethostbyname = 1
failbantime = 5
failbancount = 3

[cache]

[cccam]
port = 11111
serverip = 192.168.178.44
nodeid = 30D5DE61317EDCE5
version = 2.2.1
reshare = 0
reshare_mode = 0
ignorereshare = 1

[webif]
httpport = 83
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1


oscam.user
[account]
user = user
pwd =
caid = 098C
uniq = 3
monlevel = 4
au = skyv14
group = 1,2
cccreshare = 0

oscam.server
[reader]
label = skyv14
protocol = mouse
device = /dev/ttyUSB0
services = skyall
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 358
cardmhz = 358
group = 1,2
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

Dreambox OSCAM settings >

Spoiler

oscam.conf

[global]
logfile = /tmp/oscam.log
logduplicatelines = 1
pidfile = /var/run/oscam.pid
bindwait = 20
unlockparental = 1
nice = -1
maxlogsize = 1000
block_same_ip = 0
block_same_name = 0
resolvegethostbyname = 1

[cache]

[webif]
httpport = 8888
httpuser = root
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
httposcamlabel = OscamDreambox

oscam.user
[account]
user = user
pwd =
caid = 098C
uniq = 3
group = 1,2
au = skyv14

oscam.server
label = Server
protocol = skyv14
device = 192.168.178.44,11111
user = dreambox
password = dreambox
inactivitytimeout = 30
group = 2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

oscam.dvbapi
P:098C
I:0

Ich möchte nun die EMM´s Intern/Global durch die Dreambox erhalten um Sie dann zu aktivieren.
Welche C Line datei muss auf die Box angelegt sein cccam.cnf oder oscam.cnf

Hier mal die logifles:

logfile.oscam.dreambox

Spoiler

• 2015/06/18 15:09:21 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10100 (mipsel-oe-linux)
• 2015/06/18 15:09:21 0 s creating pidfile /var/run/oscam.pid with pid 19475
• 2015/06/18 15:09:21 0 s [Emu] OSEmu (built-in) version 708
• 2015/06/18 15:09:21 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2015/06/18 15:09:21 0 s signal handling initialized
• 2015/06/18 15:09:21 0 s 213 service-id's loaded in 9 ms
• 2015/06/18 15:09:21 0 s 5 provid's loaded
• 2015/06/18 15:09:21 0 s emulator [emu] creating thread for device emulator
• 2015/06/18 15:09:21 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2015/06/18 15:09:21 0 s waiting for local card init
• 2015/06/18 15:09:21 77900618 r key file not found in: /etc/tuxbox/config
• 2015/06/18 15:09:21 77900618 r key file not found in: /var/keys
• 2015/06/18 15:09:21 77900618 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2015/06/18 15:09:21 99A008 h webif: decompressed 158591 bytes back into 378296 bytes
• 2015/06/18 15:09:21 99A008 h HTTP Server running. ip=0.0.0.0 port=8888
• 2015/06/18 15:09:22 77900618 r emulator [emu] card detected
• 2015/06/18 15:09:23 77900618 r emulator [emu] found card system emu
• 2015/06/18 15:09:23 77900618 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/18 15:09:23 77900618 r key file not found in: /etc/tuxbox/config
• 2015/06/18 15:09:23 77900618 r key file not found in: /var/keys
• 2015/06/18 15:09:24 0 s init for all local cards done
• 2015/06/18 15:09:24 0 s anti cascading disabled

logfile.oscam.server

Spoiler

>> OSCam << cardserver started at Thu Jun 18 15:04:16 2015
-------------------------------------------------------------------------------
2015/06/18 15:04:16 0 s >> OSCam << cardserver started, version 1.20-emu, build r10123 (mipsel-linux-uclibc-libusb)
2015/06/18 15:04:16 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 7654
2015/06/18 15:04:16 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2015/06/18 15:04:16 0 s [Emu] OSEmu (built-in) version 708
2015/06/18 15:04:16 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/06/18 15:04:16 0 s signal handling initialized
2015/06/18 15:04:16 0 s 159 service-id's loaded in 8 ms
2015/06/18 15:04:16 0 s 161 tier-id's loaded
2015/06/18 15:04:16 0 s 4 provid's loaded
2015/06/18 15:04:16 0 s cccam: initialized (fd=6, port=11111, ip=192.168.178.44)
2015/06/18 15:04:16 0 s skyv14 [mouse] creating thread for device /dev/ttyUSB0
2015/06/18 15:04:16 0 s emulator [emu] creating thread for device emulator
2015/06/18 15:04:16 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/06/18 15:04:16 0 s waiting for local card init
2015/06/18 15:04:16 538E28 h webif: decompressed 99197 bytes back into 260984 bytes
2015/06/18 15:04:16 538E28 h HTTP Server running. ip=192.168.178.44 port=83
2015/06/18 15:04:16 58AF10 r key file not found in: /var/media/ftp/uStor01/addon/oscam
2015/06/18 15:04:16 58AF10 r cannot open key file path: /var/keys
2015/06/18 15:04:16 58AF10 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/06/18 15:04:16 5890E0 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
2015/06/18 15:04:17 58AF10 r emulator [emu] card detected
2015/06/18 15:04:17 5890E0 r skyv14 [mouse] card detected
2015/06/18 15:04:18 58AF10 r emulator [emu] found card system emu
2015/06/18 15:04:18 58AF10 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/18 15:04:18 58AF10 r key file not found in: /var/media/ftp/uStor01/addon/oscam
2015/06/18 15:04:18 58AF10 r cannot open key file path: /var/keys
2015/06/18 15:04:18 5890E0 r skyv14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/06/18 15:04:18 5890E0 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/06/18 15:04:18 5890E0 r skyv14 [mouse] Setting baudrate to 153600 bps
2015/06/18 15:04:18 5890E0 r skyv14 [mouse] Calculated work ETU is 6.49 us reader mhz = 358
2015/06/18 15:04:18 5890E0 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
2015/06/18 15:04:20 5890E0 r skyv14 [mouse] Card type: P1TV
2015/06/18 15:04:20 5890E0 r skyv14 [mouse] Rom version: 20AA
2015/06/18 15:04:20 5890E0 r skyv14 [mouse] Credit available on card: 0 euro
2015/06/18 15:04:20 5890E0 r skyv14 [mouse] Extended 4C detected
2015/06/18 15:04:20 5890E0 r skyv14 [mouse] FuseByte: 00
2015/06/18 15:04:20 5890E0 r skyv14 [mouse] Region Code:
2015/06/18 15:04:20 5890E0 r skyv14 [mouse] Country Code: DEU
2015/06/18 15:04:20 5890E0 r skyv14 [mouse] Pincode read: 4358
2015/06/18 15:04:20 5890E0 r skyv14 [mouse] PCB settings: FF FF FF FF
2015/06/18 15:04:20 5890E0 r skyv14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/06/18 15:04:20 5890E0 r skyv14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/06/18 15:04:20 5890E0 r skyv14 [mouse] ready for requests
2015/06/18 15:04:20 5890E0 r skyv14 [mouse] found card system videoguard2
2015/06/18 15:04:20 5890E0 r skyv14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/18 15:04:20 5890E0 r skyv14 [videoguard2] card detected
2015/06/18 15:04:20 5890E0 r skyv14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/06/18 15:04:23 0 s init for all local cards done
2015/06/18 15:04:23 0 s anti cascading disabled
2015/06/18 15:08:46 538E28 h Restart requested by WebIF from 192.168.178.130
2015/06/18 15:08:46 538E28 h restart oscam requested
2015/06/18 15:08:48 538E28 h HTTP Server stopped
2015/06/18 15:08:48 0 s skyv14 [videoguard2] Killing reader
2015/06/18 15:08:49 0 s userdb 1 accounts freed
2015/06/18 15:08:49 0 s readerdb 2 readers freed
2015/06/18 15:08:49 0 s cardserver down

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jun 18 15:08:49 2015
-------------------------------------------------------------------------------
2015/06/18 15:08:49 0 s >> OSCam << cardserver started, version 1.20-emu, build r10123 (mipsel-linux-uclibc-libusb)
2015/06/18 15:08:49 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 8277
2015/06/18 15:08:49 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2015/06/18 15:08:49 0 s [Emu] OSEmu (built-in) version 708
2015/06/18 15:08:49 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/06/18 15:08:49 0 s signal handling initialized
2015/06/18 15:08:49 0 s 159 service-id's loaded in 7 ms
2015/06/18 15:08:49 0 s 161 tier-id's loaded
2015/06/18 15:08:49 0 s 4 provid's loaded
2015/06/18 15:08:49 0 s cccam: initialized (fd=6, port=11111, ip=192.168.178.44)
2015/06/18 15:08:49 0 s skyv14 [mouse] creating thread for device /dev/ttyUSB0
2015/06/18 15:08:49 0 s emulator [emu] creating thread for device emulator
2015/06/18 15:08:49 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/06/18 15:08:49 0 s waiting for local card init
2015/06/18 15:08:49 549560 h webif: decompressed 99197 bytes back into 260984 bytes
2015/06/18 15:08:49 549560 h HTTP Server running. ip=192.168.178.44 port=83
2015/06/18 15:08:49 58AF10 r key file not found in: /var/media/ftp/uStor01/addon/oscam
2015/06/18 15:08:49 58AF10 r cannot open key file path: /var/keys
2015/06/18 15:08:49 58AF10 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/06/18 15:08:49 540058 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
2015/06/18 15:08:50 58AF10 r emulator [emu] card detected
2015/06/18 15:08:50 540058 r skyv14 [mouse] card detected
2015/06/18 15:08:51 58AF10 r emulator [emu] found card system emu
2015/06/18 15:08:51 58AF10 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/18 15:08:51 58AF10 r key file not found in: /var/media/ftp/uStor01/addon/oscam
2015/06/18 15:08:51 58AF10 r cannot open key file path: /var/keys
2015/06/18 15:08:51 540058 r skyv14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/06/18 15:08:51 540058 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/06/18 15:08:51 540058 r skyv14 [mouse] Setting baudrate to 153600 bps
2015/06/18 15:08:51 540058 r skyv14 [mouse] Calculated work ETU is 6.49 us reader mhz = 358
2015/06/18 15:08:51 540058 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
2015/06/18 15:08:52 540058 r skyv14 [mouse] Card type: P1TV
2015/06/18 15:08:52 540058 r skyv14 [mouse] Rom version: 20AA
2015/06/18 15:08:52 540058 r skyv14 [mouse] Credit available on card: 0 euro
2015/06/18 15:08:52 540058 r skyv14 [mouse] Extended 4C detected
2015/06/18 15:08:52 540058 r skyv14 [mouse] FuseByte: 00
2015/06/18 15:08:52 540058 r skyv14 [mouse] Region Code:
2015/06/18 15:08:52 540058 r skyv14 [mouse] Country Code: DEU
2015/06/18 15:08:52 540058 r skyv14 [mouse] Pincode read: 4358
2015/06/18 15:08:52 540058 r skyv14 [mouse] PCB settings: FF FF FF FF
2015/06/18 15:08:52 540058 r skyv14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/06/18 15:08:52 540058 r skyv14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/06/18 15:08:52 540058 r skyv14 [mouse] ready for requests
2015/06/18 15:08:52 540058 r skyv14 [mouse] found card system videoguard2
2015/06/18 15:08:52 540058 r skyv14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/18 15:08:52 540058 r skyv14 [videoguard2] card detected
2015/06/18 15:08:52 540058 r skyv14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/06/18 15:08:55 0 s init for all local cards done
2015/06/18 15:08:55 0 s anti cascading disabled

 

[salidos]

AW: V14 Freetz OSCAM - Dreambox - Aktivierung

1. Existiert der Ordner auch wirklich und hat die Rechte 755? emmlogdir = /var/media/ftp/uStor01/addon/oscam/
2. caid = 098C raus aus der oscam.user und pwd = pass
3. version = 2.3.0 in oscam.conf
4. cccam.cfg auf client: C: ip.des.servers 11111 user pass

 

[cojo]

AW: V14 Freetz OSCAM - Dreambox - Aktivierung

global? du brauchst unique

geblockt wird nur auf dem Server,nicht auf dem clienten,sonst kommt ja nix am server an;-)

auf der dream reicht cccam eigentlich vollkommen aus

und wenn schon oscam auf der dream,dann fehlt da der dvbapi Abschnitt in der oscam.config

schau dir meine SIgnatur als beispiel mal an

 

[salidos]

AW: V14 Freetz OSCAM - Dreambox - Aktivierung

Ich hab ihn so verstanden:
Er hat ne Fritzbox als Server und der Client ist eine Dreambox.

 

[crazyfreak01]

AW: V14 Freetz OSCAM - Dreambox - Aktivierung

dreambox Settings ändern:

Spoiler

oscam.server
label = Server
protocol = skyv14 ------------>>ändern in cccam
device = 192.168.178.44,11111
user = dreambox
password = dreambox
inactivitytimeout = 30
group = 2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

den User dreambox mit Passwort dreambox auf dem Server anlegen .

 

[Blackmen]

Hallo,

zu 1. der ordner existiert.
zu 2. Caid unbedingt raußnehmen? USER und PSWD habe ich gemacht und die dreambox ist mit dem server verbunden.
zu 3. version wurde geändert.
zu 4. cccam.cfg CLine eintrag habe ich gemacht und alles ist top verbunden.
Oscam von der Dreambox muss ich ja somit ausstellen und den CMU auf cccam umstellen
das ist ja alles kein problem und funktioniert auch so.
Also werden die EMMS jetzt so durch den Server an die Dreambox gesendet und gespeichert, sobald ich richtig gelsesen habe in den tuxordner aber ist das denn so korrekt?

Hey,

ich meinte damit Lokal tut mir leid.
Also oscam habe ich von der box genommen, bin jetzt mit dem server verbunden AU = on
In welchem ordner der dreambox werden nun angeforderte emms gespeichert??

 

[dodo83]

AW: V14 Freetz OSCAM - Dreambox - Aktivierung

die EMM solltem am Server gespeichert werden und zwar dort

[COLOR=#333333]emmlogdir = /var/media/ftp/uStor01/addon/oscam/[/COLOR]

laut deinem Eintrag

 

[Blackmen]

AW: V14 Freetz OSCAM - Dreambox - Aktivierung

Ja das tut es auch, ich habe auch vor ein paar wochen welche bekommen und laut sammeliste die (richtige) emm auf die karte geschrieben aber das einzige was im log passiert ist dies :
Card isn't active...

Sky sender ist natürlich eingeschaltet

- - - - - - - - - -

skyv14 wird im AU als = active angezeigt

bekomme aber keine entitlements rein... komisch

 

[dodo83]

AW: V14 Freetz OSCAM - Dreambox - Aktivierung

dann jetzt mal von vorne,
welche EMM hast du bekommen
welche geschrieben
wann ist die letzte freischaltung her
AU sollte nur auf ACTIVE gehen wenn du manuell schreibst, ansonsten auf ON stehen da alles geblockt ist

 

[Blackmen]

AW: V14 Freetz OSCAM - Dreambox - Aktivierung

Hallo,
die empfangenen emms nach telefonanruf bekam ich vor ungefähr drei wochen

Manuell draufgeschrieben habe ich diese :

 

[cojo]

AW: V14 Freetz OSCAM - Dreambox - Aktivierung

da muss aber in 3 Wochen noch mehr gekommen sein?
Und wer hat dir geraten den zu schreiben?
Hast du NUR den geschrieben?
Mal Payload ausgelesen?
Wie hast du die bekommen,wenn du die Dream garnicht richti eingestellt hast?

 

[Blackmen]

AW: V14 Freetz OSCAM - Dreambox - Aktivierung

Hier mal ein OSCAM Shot

Spoiler

Sie müssen registriert sein, um Links zu sehen.

- - - - - - - - - -

Nein mehr ist nicht gekommen,
Geraten hat keiner, habe nach der Sammelliste agiert und eine EMM genommen die nicht als gefährlich gestuft ist.
Ja nur diese eine EMM wurde eingetragen.

Payload?

Bin mir da garnicht mehr sicher wie ich die EMMS bekommen habe. Ich glaube einfach auch durch CCCAM auf der Dreambox

 

[cojo]

AW: V14 Freetz OSCAM - Dreambox - Aktivierung

imWebif auf live log,dann zuerst auf die 4 dann auf die 2 klicken warten bis payloadabschnitt erscheint und den posten.

Dann lass doch einfach auf cccam,warum auf oscam wechseln

 

[Blackmen]

AW: V14 Freetz OSCAM - Dreambox - Aktivierung

Ja läuft alles über Cccam

Payload

Spoiler

2015/06/18 18:01:52 549560 h all debug_level=4
2015/06/18 18:01:53 58AF10 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:01:53 540058 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:01:54 58AF10 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:01:54 540058 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:01:54 549560 h all debug_level=6

Reader OSCAM GUI

Spoiler

Sie müssen registriert sein, um Links zu sehen.

- - - - - - - - - -

Sollte ich vielleicht nochmal neue EMMS beantragen??

- - - - - - - - - -

Hier mal die richtige paylouads

Spoiler

2015/06/18 18:07:05 58AF10 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:05 540058 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:06 0 --- Skipped 1 duplicated log lines ---
2015/06/18 18:07:06 58AF10 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:06 540058 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:07 540058 r ecm:
2015/06/18 18:07:07 540058 80 70 95 00 00 01 1D 89 12 80 DC 01 2D AA 55 05
2015/06/18 18:07:07 540058 20 01 00 00 80 40 36 40 AD 17 55 2B E6 F4 9F 03
2015/06/18 18:07:07 540058 02 05 02 67 73 7D 0B 0C 8E 02 53 A5 5C E1 78 47
2015/06/18 18:07:07 540058 00 00 90 64 C1 01 8E 85 DD B3 77 C0 25 F2 6E C7
2015/06/18 18:07:07 540058 A3 A0 DA 3E 08 71 2E 46 DD 5C BA 83 CF 18 E9 B6
2015/06/18 18:07:07 540058 CA C9 6E 1E 62 8B DC 6E D0 01 6B C8 78 57 20 DB
2015/06/18 18:07:07 540058 C6 77 8F 2B 91 4D 7B E4 46 3D A8 98 A8 D0 F5 AD
2015/06/18 18:07:07 540058 0A 65 F1 0F 53 F9 0B D2 08 84 F3 76 B3 69 FD DC
2015/06/18 18:07:07 540058 75 DE E7 B9 79 99 26 C8 7C 68 BA D0 C0 C4 C6 B9
2015/06/18 18:07:07 540058 58 48 9E AD 95 F4 15 25
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] cardreader_do_ecm: cardreader_do_checkhealth returned rc=1
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] write to cardreader
2015/06/18 18:07:07 540058 D1 40 00 80 74 00 7D 0B 0C 8E 02 53 A5 5C E1 78
2015/06/18 18:07:07 540058 47 00 00 90 64 C1 01 8E 85 DD B3 77 C0 25 F2 6E
2015/06/18 18:07:07 540058 C7 A3 A0 DA 3E 08 71 2E 46 DD 5C BA 83 CF 18 E9
2015/06/18 18:07:07 540058 B6 CA C9 6E 1E 62 8B DC 6E D0 01 6B C8 78 57 20
2015/06/18 18:07:07 540058 DB C6 77 8F 2B 91 4D 7B E4 46 3D A8 98 A8 D0 F5
2015/06/18 18:07:07 540058 AD 0A 65 F1 0F 53 F9 0B D2 08 84 F3 76 B3 69 FD
2015/06/18 18:07:07 540058 DC 75 DE E7 B9 79 99 26 C8 7C 68 BA D0 C0 C4 C6
2015/06/18 18:07:07 540058 B9 58 48 9E AD 95 F4 15 25
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] Answer from cardreader:
2015/06/18 18:07:07 540058 90 00
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] write to cardreader
2015/06/18 18:07:07 540058 D3 54 00 00 5E
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] Answer from cardreader:
2015/06/18 18:07:07 540058 96 86 63 76 08 4B 71 CE 4C CA 70 B7 0B 4E 49 2A
2015/06/18 18:07:07 540058 12 0A 22 54 0D 15 6C 42 9C A6 44 BD B3 7C 5F 86
2015/06/18 18:07:07 540058 E7 D6 DE D5 D8 B4 E4 ED 6C 8B 17 B1 24 CB B4 CE
2015/06/18 18:07:07 540058 93 75 BE 91 91 5D BD C8 84 25 FB 49 68 DF D8 7E
2015/06/18 18:07:07 540058 FD AA 57 12 A5 00 7E ED AE 61 25 89 C1 DC 75 B9
2015/06/18 18:07:07 540058 81 36 82 46 B0 7F E8 9D D0 50 05 86 C6 77 90 00
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] Decrypted payload
2015/06/18 18:07:07 540058 00 00 00 00 00 00 00 00 00 00 00 00 FF 00 22 02
2015/06/18 18:07:07 540058 00 80 0E 02 00 00 0F 06 02 30 20 00 00 11 20 04
2015/06/18 18:07:07 540058 00 00 00 00 25 11 00 00 00 00 00 00 00 00 00 00
2015/06/18 18:07:07 540058 00 00 00 00 00 00 00 2A 04 00 00 00 00 55 01 20
2015/06/18 18:07:07 540058 56 08 00 00 00 00 00 00 00 00 2B 02 00 00
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] classD3 ins54: no cw --> No tier found
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] cardreader_do_ecm: after csystem.do_ecm rc=0
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] cardreader_do_ecm: ret rc=0
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] cardreader_process_ecm: cardreader_do_ecm returned rc=0 (ERROR=0)
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] Error processing ecm for caid 098C, srvid 000A, servicename: Sky Cinema
2015/06/18 18:07:07 5A03D0 c dreambox (098C&000000/012D/000A/98:0E0410AB63C688DBA30E5C67C62D09BF): not found (157 ms) by skyv14 - Sky Cinema
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] ecm hash: 0E0410AB63C688DBA30E5C67C62D09BF real time: 128 ms
2015/06/18 18:07:07 5A03D0 c cw:
2015/06/18 18:07:07 5A03D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/06/18 18:07:07 58AF10 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:07 540058 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:08 58AF10 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:08 540058 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:09 58AF10 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:09 540058 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:10 0 --- Skipped 1 duplicated log lines ---
2015/06/18 18:07:10 58AF10 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:11 0 --- Skipped 1 duplicated log lines ---
2015/06/18 18:07:11 540058 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:12 58AF10 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:12 540058 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:13 58AF10 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:13 540058 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:14 58AF10 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:14 540058 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:15 58AF10 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:15 540058 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:16 58AF10 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:16 540058 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:17 0 --- Skipped 1 duplicated log lines ---
2015/06/18 18:07:17 58AF10 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:17 540058 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/18 18:07:17 58AF10 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1

 

[cojo]

AW: V14 Freetz OSCAM - Dreambox - Aktivierung

ok,Karte ist noch Jungfrau
stell die dbox auf cccam um,das reicht vollkommen um emm zu bekommen