Newcs V13 Karte in Smartmouse Phoenix

[Hirntot]

Hallo ,
und zwar ich habe folgendes Problem ich will auf meinen rechner eine V13 Karte Sharen.
Das Problem es steht immer "Card 0900 on port COM1 failed "
Hier mal die newCS.xml

<?xml version="1.0" ?>
- <!-- For setup-issues, look in readme.txt!If there are other troubles, try different forums or irc channels around )The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.** This is the example file for Phoenix Interface on Windows. -->
- <newCSconfig>
- <readers name="Phoenix">
- <device>
<name>Phoenix Interface</name>

<type>phoenix</type>

<mhz>357</mhz>

<node>COM1</node>

<parity>odd</parity>

<reset>normal</reset>

<export>Yes</export>

<enabled>Yes</enabled>

<blocksa>No</blocksa>

<blockua>No</blockua>

<blockga>No</blockga>

<boxkey>00000000</boxkey>
<rsa>0000000000</rsa>
<irdeto-camkey>0000000000000000</irdeto-camkey>

<irdeto-camkey-data>00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000</irdeto-camkey-data>

<crypto-special>No</crypto-special>

<ipk>00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000</ipk>

<ucpk>00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000</ucpk>

<PTShandshake>No</PTShandshake>

<carddetect>yes</carddetect>

<newcamd_port>15000</newcamd_port>

<autosid>Yes</autosid>

<Seca-PPV>no</Seca-PPV>

<pincode>0000</pincode>

<priority>round</priority>

</device>


</readers>


- <radegastserver>
<enabled>No</enabled>

<port>16000</port>

- <allow>
<hostname>localhost</hostname>

</allow>


</radegastserver>


- <cache>
<emm>20</emm>

<ecm>-1</ecm>

</cache>


- <debug>
<password>NewCSpwd</password>

<level>normal</level>

<type>init</type>

<output>console,tcp</output>

<console_options>normal,init</console_options>

<tcp_port>1001</tcp_port>

<tcp_options>normal,init</tcp_options>

</debug>


- <newcamdserver>
<enabled>Yes</enabled>

<name>newcs</name>

<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>

- <user>
<name>admin</name>

<password>admin</password>

<hostname>localhost</hostname>

<port>12000</port>

<au>on</au>

<sidoverride>off</sidoverride>

<spider>No</spider>

<rate>2</rate>

</user>


</newcamdserver>


</newCSconfig>

[FONT=&quot][/FONT]

 

[Phantom]

AW: V13 Karte in Smartmouse Phoenix

Steht der Reader auch auf 3,57 Mhz ???? Mit mein MasterCRD und Cas3 habe ich die NDS nicht zum laufen gebracht. Bei einigen soll sie jedoch funktionieren.

 

[Hirntot]

AW: V13 Karte in Smartmouse Phoenix

Es ist ja nur der doofe Fehler !!!!
"Card 0900 on port COM1 failed "

 

[Phantom]

AW: V13 Karte in Smartmouse Phoenix

Versuche mal diese Zeile

<boxkey>01020304</boxkey>

Das die NDS nicht will ist ein Problem welches mehrere haben

 

[Hirntot]

AW: V13 Karte in Smartmouse Phoenix

ne steht immernoch der fehler !!!
Was kann das denn sein !!!

Hier mal das was newcs sagt

NewCS läuft...
This is NewCS 1.50 - the New CardServer by Butter-team..
Compiled on Oct 26 2007 at 16:36:54
SetConsoleWindowInfo
SetConsoleScreenBufferSize
Reading Config file from newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 18:22:58 ] [ Box detect ] Windows XP Build 2600
[ 18:22:58 ] [ Config ] Value in <rsa> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 18:22:58 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 18:22:58 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 18:22:58 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 18:22:58 ] [ Config ] COM1 ECM priority: round
[ 18:22:58 ] [ EMM Cache ] Initialising Cache with 20 entries
[ 18:22:58 ] [ ECM Cache ] Initialising dynamic Cache
[ 18:22:58 ] [ Loader ] Starting Telnet on port 1001
[ 18:22:58 ] [ Loader ] Reader type 2 on node COM1
[ 18:22:58 ] [ Phoenix ] Opening device COM1
[ 18:22:58 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 18:22:58 ] [ Phoenix ] Setting 1 Stop bit on node COM1
[ 18:22:58 ] [ Phoenix ] Setting baud to 9600
[ 18:23:00 ] [ Loader ] Clearing all autosids on reader ...
[ 18:23:00 ] [ ATR ] T=0 1etu=104.17us Guardtime:15etu WWT:9600etu
[ 18:23:00 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P 1 [01] [00] [11]
[ 18:23:00 ] [ Loader ] Init NDS card
[ 18:23:00 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 18:23:00 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 18:23:00 ] [ Phoenix ] Setting baud to 9600
[ 18:23:01 ] [ Loader ] Card 0900 on port COM1 failed
[ 18:23:01 ] [ Loader ] Starting Newcamd Server on port 15000
[ 18:23:01 ] [ Loader ] Reinit card with caid 0900
[ 18:23:01 ] [ Loader ] Reader type 2 on node COM1
[ 18:23:01 ] [ Phoenix ] Opening device COM1
[ 18:23:01 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 18:23:01 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 18:23:01 ] [ Phoenix ] Setting baud to 9600
[ 18:23:03 ] [ Loader ] Clearing all autosids on reader ...
[ 18:23:03 ] [ ATR ] T=0 1etu=104.17us Guardtime:15etu WWT:9600etu
[ 18:23:03 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P 1 [01] [00] [11]
[ 18:23:03 ] [ Loader ] Init NDS card
[ 18:23:03 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 18:23:03 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 18:23:03 ] [ Phoenix ] Setting baud to 9600
[ 18:23:03 ] [ Loader ] Card 0900 on port COM1 failed
[ 18:23:04 ] [ Loader ] Reinit card with caid 0900
[ 18:23:04 ] [ Loader ] Reader type 2 on node COM1
[ 18:23:04 ] [ Phoenix ] Opening device COM1
[ 18:23:04 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 18:23:04 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 18:23:04 ] [ Phoenix ] Setting baud to 9600
[ 18:23:05 ] [ Loader ] Clearing all autosids on reader ...
[ 18:23:05 ] [ ATR ] T=0 1etu=104.17us Guardtime:15etu WWT:9600etu
[ 18:23:05 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P 1 [01] [00] [11]
[ 18:23:05 ] [ Loader ] Init NDS card
[ 18:23:05 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 18:23:05 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 18:23:05 ] [ Phoenix ] Setting baud to 9600
[ 18:23:06 ] [ Loader ] Card 0900 on port COM1 failed
[ 18:23:06 ] [ Loader ] Reinit card with caid 0900
[ 18:23:06 ] [ Loader ] Reader type 2 on node COM1
[ 18:23:06 ] [ Phoenix ] Opening device COM1
[ 18:23:06 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 18:23:06 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 18:23:06 ] [ Phoenix ] Setting baud to 9600
[ 18:23:08 ] [ Loader ] Clearing all autosids on reader ...
[ 18:23:08 ] [ ATR ] T=0 1etu=104.17us Guardtime:15etu WWT:9600etu
[ 18:23:08 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P 1 [01] [00] [11]
[ 18:23:08 ] [ Loader ] Init NDS card
[ 18:23:08 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 18:23:08 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 18:23:08 ] [ Phoenix ] Setting baud to 9600
[ 18:23:08 ] [ Loader ] Card 0900 on port COM1 failed
[ 18:23:08 ] [ Loader ] Reinit card with caid 0900
[ 18:23:08 ] [ Loader ] Reader type 2 on node COM1
[ 18:23:08 ] [ Phoenix ] Opening device COM1
[ 18:23:08 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 18:23:08 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 18:23:08 ] [ Phoenix ] Setting baud to 9600
[ 18:23:10 ] [ Loader ] Clearing all autosids on reader ...
[ 18:23:10 ] [ ATR ] T=0 1etu=104.17us Guardtime:15etu WWT:9600etu
[ 18:23:10 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P 1 [01] [00] [11]
[ 18:23:10 ] [ Loader ] Init NDS card
[ 18:23:10 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 18:23:10 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 18:23:10 ] [ Phoenix ] Setting baud to 9600
[ 18:23:10 ] [ Loader ] Card 0900 on port COM1 failed
[ 18:23:10 ] [ Loader ] Reinit card with caid 0900
[ 18:23:10 ] [ Loader ] Reader type 2 on node COM1
[ 18:23:10 ] [ Phoenix ] Opening device COM1
[ 18:23:10 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 18:23:10 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 18:23:10 ] [ Phoenix ] Setting baud to 9600
[ 18:23:12 ] [ Loader ] Clearing all autosids on reader ...
[ 18:23:12 ] [ ATR ] T=0 1etu=104.17us Guardtime:15etu WWT:9600etu
[ 18:23:12 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P 1 [01] [00] [11]
[ 18:23:12 ] [ Loader ] Init NDS card
[ 18:23:12 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 18:23:12 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 18:23:12 ] [ Phoenix ] Setting baud to 9600
[ 18:23:12 ] [ Loader ] Card 0900 on port COM1 failed

 

[Phantom]

AW: V13 Karte in Smartmouse Phoenix

Diesen Fehler hat jeder

[ 18:23:01 ] [ Loader ] Card 0900 on port COM1 failed

Das Newcs erkennt die karte nicht. Daher sollst du mal an den Box key spielen. Meine NDS habe ich wieder getauscht. Daher kann ich es nicht mehr testen.

 

[Hirntot]

AW: V13 Karte in Smartmouse Phoenix

naja ich hab ja schon den boxkey geändert, habe den eingefügt den du mir gegeben hast

 

[Phantom]

AW: V13 Karte in Smartmouse Phoenix

Ich mache mich mal weiter schlau. Was du aber noch testen kannst ist eine ältere version vom newcs.

 

[Hirntot]

AW: V13 Karte in Smartmouse Phoenix

Ja das währe nett wo bekomme ich denn ne alte version her

 

[Hirntot]

AW: V13 Karte in Smartmouse Phoenix

haste schon was gefunden ???

 

[Phantom]

AW: V13 Karte in Smartmouse Phoenix

<newCSconfig>
<readers name="phoenix">

<device>
<name>Phoenix Interface</name>
<type>phoenix</type>
<node>com1</node>
<mhz>357</mhz>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>Yes</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<priority>round</priority>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>

<sid>
<allow>
<id></id>
</allow>
<deny>
<id></id>
</deny>
</sid>
</device>


</readers>

<cache>
<emm>10</emm>
<ecm>30</ecm>
</cache>
<debug>
<password></password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>

<user><spider>off</spider><rate>2</rate><sidoverride>off</sidoverride><status>access</status>
<name>newcs11</name>
<password>newcs12</password>
<au>on</au>
</user>

</newcamdserver>

<httpd>
<server>
<port>12010</port>
<enabled>yes</enabled>
</server>
<user>
<name>Admin</name>
<password>newcs</password>
<accesslevel>newcs</accesslevel>
</user>
</httpd>

</newCSconfig>





Teste mal diese

 

[Hirntot]

AW: V13 Karte in Smartmouse Phoenix

Ne finzt leider auch nich aber jetzt steht des

NewCS läuft...
This is NewCS 1.50 - the New CardServer by Butter-team..
Compiled on Oct 26 2007 at 16:36:54
SetConsoleWindowInfo
SetConsoleScreenBufferSize
Reading Config file from newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 15:39:00 ] [ Box detect ] Windows XP Build 2600
[ 15:39:00 ] [ Config ] Value in <rsa> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 15:39:00 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 15:39:00 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 15:39:00 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 15:39:00 ] [ Config ] COM3 ECM priority: round
[ 15:39:00 ] [ EMM Cache ] Initialising Cache with 20 entries
[ 15:39:00 ] [ ECM Cache ] Initialising dynamic Cache
[ 15:39:00 ] [ Loader ] Starting Telnet on port 1001
[ 15:39:00 ] [ Loader ] Reader type 2 on node COM3
[ 15:39:00 ] [ Phoenix ] Opening device COM3
[ 15:39:00 ] [ Phoenix ] Setting parity to ODD on node COM3
[ 15:39:00 ] [ Phoenix ] Setting 1 Stop bit on node COM3
[ 15:39:00 ] [ Phoenix ] Setting baud to 9600
[ 15:39:01 ] [ Loader ] Clearing all autosids on reader ...
[ 15:39:01 ] [ Loader ] Reset failed ...
[ 15:39:01 ] [ Loader ] Starting Newcamd Server on port 24010
[ 15:39:02 ] [ Loader ] Reader type 2 on node COM3
[ 15:39:02 ] [ Phoenix ] Opening device COM3
[ 15:39:02 ] [ Phoenix ] Setting parity to ODD on node COM3
[ 15:39:02 ] [ Phoenix ] Setting 1 Stop bit on node COM3
[ 15:39:02 ] [ Phoenix ] Setting baud to 9600
[ 15:39:04 ] [ Loader ] Clearing all autosids on reader ...
[ 15:39:04 ] [ Loader ] Reset failed ...
[ 15:39:04 ] [ Loader ] Reader type 2 on node COM3
[ 15:39:04 ] [ Phoenix ] Opening device COM3
[ 15:39:04 ] [ Phoenix ] Setting parity to ODD on node COM3
[ 15:39:04 ] [ Phoenix ] Setting 1 Stop bit on node COM3
[ 15:39:04 ] [ Phoenix ] Setting baud to 9600
[ 15:39:06 ] [ Loader ] Clearing all autosids on reader ...
[ 15:39:06 ] [ Loader ] Reset failed ...
[ 15:39:06 ] [ Loader ] Reader type 2 on node COM3
[ 15:39:06 ] [ Phoenix ] Opening device COM3
[ 15:39:06 ] [ Phoenix ] Setting parity to ODD on node COM3
[ 15:39:06 ] [ Phoenix ] Setting 1 Stop bit on node COM3
[ 15:39:06 ] [ Phoenix ] Setting baud to 9600
[ 15:39:08 ] [ Loader ] Clearing all autosids on reader ...
[ 15:39:08 ] [ Loader ] Reset failed ...
[ 15:39:08 ] [ Loader ] Reader type 2 on node COM3
[ 15:39:08 ] [ Phoenix ] Opening device COM3
[ 15:39:08 ] [ Phoenix ] Setting parity to ODD on node COM3
[ 15:39:08 ] [ Phoenix ] Setting 1 Stop bit on node COM3
[ 15:39:08 ] [ Phoenix ] Setting baud to 9600

 

[Hirntot]

AW: V13 Karte in Smartmouse Phoenix

Nach langen lesen lesen lesen lesen lääuft der server !!!

Ich habe mir einfach die newcs version 1.13 besorgt und schon lief es !!!
danke trotzdem an alle

 

[DerSpassmacher]

AW: V13 Karte in Smartmouse Phoenix

Ich hatte die V13 mit newcs 1.63 ganz gut am Laufen.
Vielleicht die mal testen.

Gruß
Der Spaßmacher