V13 gepairt?

[dodo83]

teste mal eine Binary aus dem Download Bereich eventuell,
die Modern setzt ja Anhand des ATR die Configs vor, auch den ins7e11 Mode, würde es mal probieren

 

[Psychedilic]

Welche kann ich da für die 920 nutzen?
Und was mach ich dann mir der Binary?

 

[name007]

dann läuft die oscam noch. oben auf restart und dann auf shutdown klicken. dann sollte sie sich selbst beenden.

 

[Psychedilic]

Hab eine andere Binary getestet. Hatte dann kein zugriff mehr auf das WebIf.

 

[name007]

die muss natürlich mit dem selben config-directory aufgerufen werden. bei gleichen configs sollte dann das webif auch gehen.

kontrollieren welche config-dir genutzt wird, kannst du auch. klicke dazu im webif auf files. relativ weit oben findest du dort eine zeile mit :

ConfigDir:

dahinter steht die von der oscam benutze config dir...

 

[leo14]

Ich glaube, wenn Psychedilic sich ein wenig mehr Zeit dafür nehmen würde, wäre die Kuh schon längst vom Eis. So kommt immer nur Bruchstück was rüber, wo man nicht wirklich sofort helfen kann. Klar hat nicht jeder immer Zeit, aber die paar Minuten könnte man dran bleiben. Ist nicht bös gemeint.

 

[Psychedilic]

@leo14 Da stimm ich dir vollkommen zu. Nur hab ich immer gedacht das ich etwas Zeit hab und dann kam doch wieder was dazwischen.
War also nicht meine Absicht.

@name007 hab jetzt die Oscam r11398 zum laufen bekommen. Sieht so aus als machte mein FTP Programm nicht das was es sollte.

Hier mal das Logfile.

Spoiler

• 2018/02/11 18:13:25 00000000 s (main) System name = Linux
• 2018/02/11 18:13:25 00000000 s (main) Host name = dm920
• 2018/02/11 18:13:25 00000000 s (main) Release = 3.14-1.17-dm920
• 2018/02/11 18:13:25 00000000 s (main) Version = #1 SMP Wed Nov 15 13:02:43 CET 2017
• 2018/02/11 18:13:25 00000000 s (main) Machine = armv7l
• 2018/02/11 18:13:25 00000000 s (main) Stb model = dm920
• 2018/02/11 18:13:25 00000000 s (main) creating pidfile /var/run/oscam.pid with pid 478
• 2018/02/11 18:13:25 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/02/11 18:13:25 00000000 s (main) signal handling initialized
• 2018/02/11 18:13:25 00000000 s (reader) lowerSlot [internal] creating thread for device /dev/sci0
• 2018/02/11 18:13:25 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/02/11 18:13:25 00000000 s (main) waiting for local card init
• 2018/02/11 18:13:25 753119ED r (reader) lowerSlot [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
• 2018/02/11 18:13:25 753119ED r (reader) lowerSlot [internal] Reader sci internal, detected box type: dm920
• 2018/02/11 18:13:25 03ACBDC1 h (webif) webif: decompressed 177605 bytes back into 437568 bytes
• 2018/02/11 18:13:25 03ACBDC1 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
• 2018/02/11 18:13:26 753119ED r (reader) lowerSlot [internal] card detected
• 2018/02/11 18:13:28 753119ED r (reader) lowerSlot [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
• 2018/02/11 18:13:28 753119ED r (reader) lowerSlot [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
• 2018/02/11 18:13:28 753119ED r (reader) lowerSlot [internal] Calculated work ETU is 74.40 us reader mhz = 500
• 2018/02/11 18:13:28 753119ED r (reader) lowerSlot [internal] Buffers readed 0 bytes total time_us 75103
• 2018/02/11 18:13:29 753119ED r (reader) lowerSlot [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2018/02/11 18:13:31 753119ED r (reader) lowerSlot [internal] card system not supported
• 2018/02/11 18:13:31 753119ED r (reader) lowerSlot [internal] Normal mode failed, reverting to Deprecated Mode
• 2018/02/11 18:13:32 753119ED r (reader) lowerSlot [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
• 2018/02/11 18:13:32 753119ED r (reader) lowerSlot [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
• 2018/02/11 18:13:32 753119ED r (reader) lowerSlot [internal] Calculated work ETU is 74.40 us reader mhz = 500
• 2018/02/11 18:13:32 753119ED r (reader) lowerSlot [internal] Buffers readed 0 bytes total time_us 75108
• 2018/02/11 18:13:33 753119ED r (reader) lowerSlot [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2018/02/11 18:13:36 753119ED r (reader) lowerSlot [internal] card system not supported
• 2018/02/11 18:13:36 753119ED r (reader) lowerSlot [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2018/02/11 18:13:36 753119ED r (reader) lowerSlot [internal] card initializing error
• 2018/02/11 18:13:36 00000000 s (main) init for all local cards done
• 2018/02/11 18:13:36 00000000 s (anticasc) anti cascading disabled
• 2018/02/11 18:13:36 32E5D542 c (client) plain dvbapi-client granted (DVBApi, au=auto (1 reader))
• 2018/02/11 18:13:36 32E5D542 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
• 2018/02/11 18:13:36 32E5D542 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
• 2018/02/11 18:13:36 32E5D542 c (dvbapi) Demuxer 0 found 0 ECMpids and 5 STREAMpids in caPMT
• 2018/02/11 18:13:36 32E5D542 c (dvbapi) Demuxer 0 found 0 ECMpids and 5 STREAMpids in PMT
• 2018/02/11 18:14:20 32E5D542 c (dvbapi) Demuxer 0 stop descrambling program number 445D (FFFE@FFFFFE:445D unknown)
• 2018/02/11 18:14:21 32E5D542 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 098C ECM_PID: 1AB6 PROVID: 000000
• 2018/02/11 18:14:21 32E5D542 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C4 ECM_PID: 1BB6 PROVID: 000000
• 2018/02/11 18:14:21 32E5D542 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 09AF ECM_PID: 1FB6 PROVID: 000000
• 2018/02/11 18:14:21 32E5D542 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098D ECM_PID: 1CB6 PROVID: 000000
• 2018/02/11 18:14:21 32E5D542 c (dvbapi) Demuxer 0 found 4 ECMpids and 2 STREAMpids in caPMT
• 2018/02/11 18:14:21 32E5D542 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2018/02/11 18:14:21 32E5D542 c (dvbapi) Demuxer 0 found 4 ECMpids and 2 STREAMpids in PMT
• 2018/02/11 18:14:25 32E5D542 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2018/02/11 18:14:30 32E5D542 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2018/02/11 18:14:35 32E5D542 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2018/02/11 18:14:40 32E5D542 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2018/02/11 18:14:44 32E5D542 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2018/02/11 18:14:49 32E5D542 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2018/02/11 18:14:50 32E5D542 c (dvbapi) Demuxer 0 stop descrambling program number 0083 (098C@000000:0083 unknown)
• 2018/02/11 18:14:50 32E5D542 c (dvbapi) Demuxer 0 found 0 ECMpids and 5 STREAMpids in caPMT
• 2018/02/11 18:14:50 32E5D542 c (dvbapi) Demuxer 0 found 0 ECMpids and 5 STREAMpids in PMT

 

[filius00]

• 2018/02/11 18:13:36 753119ED r (reader) lowerSlot [internal] card system not supported

• 2018/02/11 18:13:36 753119ED r (reader) lowerSlot [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

• 2018/02/11 18:13:36 753119ED r (reader) lowerSlot [internal] card initializing error

Da gibt es aber auch nichts neues......

 

[Psychedilic]

Ja richtig.

 

[filius00]

ist der Reader jetzt so eingestellt?

Spoiler: oscam.reader

[reader]
label = V13
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
ins7e11 = 14
detect = cd
autospeed = 1
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

 

[Psychedilic]

Die letzte Zeile hab ich jetzt mal bei mir eingefügt die war nicht da.
Nach Neustart immer noch das selbe Log

 

[filius00]

Poste nochmal die kompletten Configs (im Spoiler), kontrolliere auch nochmal die Karte
auf richtigen Slot und Sitz.

 

[Psychedilic]

Karte ist im unteren Slot mit Chip nach oben. Und sitz meiner Meinung nach auch richtig.

Spoiler: Oscam.config

[global]
logfile = /tmp/oscam.log
logduplicatelines = 1
pidfile = /var/run/oscam.pid
clienttimeout = 5000
fallbacktimeout = 2500
bindwait = 20
unlockparental = 1
nice = -1
maxlogsize = 1000
block_same_ip = 0
block_same_name = 0

[cache]
max_time = 18

[dvbapi]
enabled = 1
au = 1
user = DVBApi
boxtype = dreambox

[webif]
httpport = 8888
httpUser = xxxxxxxxxx
httpPwd = xxxxxxxxxx
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
httposcamlabel = OscamDreambox

Spoiler: Oscam.server

[reader]
label = V13
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
ins7e11 = 14
detect = cd
autospeed = 1
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

Spoiler: Oscam.user

[account]
user = DVBApi
keepalive = 1
au = 1
group = 1

 

[filius00]

Nochmal ein Log vom Start der Oscam bis zum einlesen der Karte!

 

[Psychedilic]

Spoiler: Log

• 2018/02/11 18:57:03 00000000 s (main) System name = Linux
• 2018/02/11 18:57:03 00000000 s (main) Host name = dm920
• 2018/02/11 18:57:03 00000000 s (main) Release = 3.14-1.17-dm920
• 2018/02/11 18:57:03 00000000 s (main) Version = #1 SMP Wed Nov 15 13:02:43 CET 2017
• 2018/02/11 18:57:03 00000000 s (main) Machine = armv7l
• 2018/02/11 18:57:03 00000000 s (main) Stb model = dm920
• 2018/02/11 18:57:03 00000000 s (main) creating pidfile /var/run/oscam.pid with pid 3277
• 2018/02/11 18:57:03 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/02/11 18:57:03 00000000 s (main) signal handling initialized
• 2018/02/11 18:57:03 00000000 s (reader) V13 [internal] creating thread for device /dev/sci0
• 2018/02/11 18:57:03 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/02/11 18:57:03 00000000 s (main) waiting for local card init
• 2018/02/11 18:57:03 2AB44696 r (reader) V13 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
• 2018/02/11 18:57:03 2AB44696 r (reader) V13 [internal] Reader sci internal, detected box type: dm920
• 2018/02/11 18:57:03 02242BCA h (webif) webif: decompressed 177605 bytes back into 437568 bytes
• 2018/02/11 18:57:03 02242BCA h (webif) HTTP Server running. ip=0.0.0.0 port=8888
• 2018/02/11 18:57:04 2AB44696 r (reader) V13 [internal] card detected
• 2018/02/11 18:57:05 2AB44696 r (reader) V13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
• 2018/02/11 18:57:05 2AB44696 r (reader) V13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
• 2018/02/11 18:57:05 2AB44696 r (reader) V13 [internal] Calculated work ETU is 74.40 us reader mhz = 500
• 2018/02/11 18:57:05 2AB44696 r (reader) V13 [internal] Buffers readed 0 bytes total time_us 75113
• 2018/02/11 18:57:06 2AB44696 r (reader) V13 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2018/02/11 18:57:08 2AB44696 r (reader) V13 [internal] card system not supported
• 2018/02/11 18:57:08 2AB44696 r (reader) V13 [internal] Normal mode failed, reverting to Deprecated Mode
• 2018/02/11 18:57:10 2AB44696 r (reader) V13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
• 2018/02/11 18:57:10 2AB44696 r (reader) V13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
• 2018/02/11 18:57:10 2AB44696 r (reader) V13 [internal] Calculated work ETU is 74.40 us reader mhz = 500
• 2018/02/11 18:57:10 2AB44696 r (reader) V13 [internal] Buffers readed 0 bytes total time_us 75110
• 2018/02/11 18:57:11 2AB44696 r (reader) V13 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2018/02/11 18:57:13 2AB44696 r (reader) V13 [internal] card system not supported
• 2018/02/11 18:57:13 2AB44696 r (reader) V13 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2018/02/11 18:57:13 2AB44696 r (reader) V13 [internal] card initializing error
• 2018/02/11 18:57:14 00000000 s (main) init for all local cards done
• 2018/02/11 18:57:14 00000000 s (anticasc) anti cascading disabled
• 2018/02/11 18:57:14 66B67AD0 c (client) plain dvbapi-client granted (DVBApi, au=auto (1 reader))
• 2018/02/11 18:57:14 66B67AD0 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
• 2018/02/11 18:57:14 66B67AD0 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
• 2018/02/11 18:57:19 66B67AD0 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 098C ECM_PID: 1AB6 PROVID: 000000
• 2018/02/11 18:57:19 66B67AD0 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C4 ECM_PID: 1BB6 PROVID: 000000
• 2018/02/11 18:57:19 66B67AD0 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 09AF ECM_PID: 1FB6 PROVID: 000000
• 2018/02/11 18:57:19 66B67AD0 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098D ECM_PID: 1CB6 PROVID: 000000
• 2018/02/11 18:57:19 66B67AD0 c (dvbapi) Demuxer 0 found 4 ECMpids and 3 STREAMpids in caPMT
• 2018/02/11 18:57:19 66B67AD0 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2018/02/11 18:57:19 66B67AD0 c (dvbapi) Demuxer 0 found 4 ECMpids and 3 STREAMpids in PMT
• 2018/02/11 18:57:23 66B67AD0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2018/02/11 18:57:28 66B67AD0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2018/02/11 18:57:33 66B67AD0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!