Archiv / Down Support zu iGO Primo - Teil 1

[180er]

AW: Support zu iGO Primo

Digital Eliteboard - Einzelnen Beitrag anzeigen - Support zu iGO Primo

 

[crank1911]

AW: Support zu iGO Primo

danke erstmal,
ich suche noch weitere Icone z.B. Igo Amigo.
ich komme mit der Suchfunktion noch nicht klar.
danke

 

[180er]

AW: Support zu iGO Primo

Sie müssen registriert sein, um Links zu sehen.

und sonst die 500000 startmenüs hier im board checken

@Black-Edison - versuchs mit diesem eintrag in der sys.txt

Spoiler

[sound]
os_volume=255

 

[Ewies]

AW: Support zu iGO Primo

Hallo! Wollte fragen ob Truckrouting mit der neue ta_Q3/2010 funkt, denn bei mir werden keine höhe usw. berücksichtigt bei der Berechnung?!

 

[180er]

AW: Support zu iGO Primo

nein. musst navteq Q3.2009 oder Q2 nehmen.

 

[weixi]

AW: Support zu iGO Primo

Gibt es schon neuere Erkenntnisse mit GT-505 und TMC bei Primo?

weixi

 

[angler112]

AW: Support zu iGO Primo

hallo,ich habe mal ein problem mit meinem pda medion md96710. ich bekomme igo primo gestartet,es wird aber kein gps signal gefunden und wenn ich in den einstellungen etwas machen will friert das ganze system nach einiger zeit ein und ich muß einen reset machen.

 

[ricksen666]

AW: Support zu iGO Primo

@ angler112 hast du in deiner sys die richtigen Angaben für dein Gerät gemacht ?
Primo sucht nicht Automatisch deine Baudrate


geb das mal in deine sys ein

[gps]
port="1"
baud="4800"

@ weixi nööö

kennt jemand den Unterschied zwischen tts_logics=3 und tts_logics=6

 

[angler112]

AW: Support zu iGO Primo

es ist die sonne die zu heiß scheint!!! ja ich hatte es eingestellt aber wohl nicht gespeichert. ich habe die einstellungen in der sys geändert und es scheinen sich alle probleme erledigt zu haben!!!nun werde ich mich mit den spielereien beschäftigen mal sehen wie weit ich komme.ach ja und danke noch einmal.

 

[Luxman]

AW: Support zu iGO Primo

Hallo, kann man eigendlich wie bei IGO8.3xxx die Blitzeransage einstellen, wie bei Voice_female zB. "Achtung, sie nähern sich einen festen Blitzer (Fixed_Camera.ogg), oder mobilen" usw.? Ich selbst besitze einen 4430.

Danke im vorraus...

ciao Luxman

 

[180er]

AW: Support zu iGO Primo

ja. sys.txt:

Spoiler

[debug]
speedcam_enabled=1

[warning]
speedcam_warning=1
is_spoken=1

[speedcam_category:0]
activated_spoken_type=speech
activated_speech="Achtung Blitzer."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:1]
activated_spoken_type=speech
activated_speech="Achtung Mobilblitzer."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:2]
activated_spoken_type=speech
activated_speech="Achtung Blitzer."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:3]
activated_spoken_type=speech
activated_speech="Achtung Durchschnittsgeschwindigkeitskontrolle."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:4]
activated_spoken_type=speech
activated_speech="Achtung Ampelblitzer."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:6]
activated_spoken_type=speech
activated_speech="Achtung Bahnübergang."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:7]
activated_spoken_type=speech
activated_speech="Achtung Bus-Spur-überwachung."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:8]
activated_spoken_type=speech
activated_speech="Achtung Unfallschwerpunkt."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:9]
activated_spoken_type=speech
activated_speech="Achtung Schule."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:10]
activated_spoken_type=speech
activated_speech="Achtung Orts-eingang."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:11]
activated_spoken_type=speech
activated_speech="Achtung Ampelüberwachungs-kamera und Geschwindigkeitskontrolle."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:12]
activated_spoken_type=speech
activated_speech="Achtung Mautstelle."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:13]
activated_spoken_type=speech
activated_speech="Achtung Krankenhaus."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:14]
activated_spoken_type=speech
activated_speech="Achtung Feuerwache."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:15]
activated_spoken_type=speech
activated_speech="Achtung Staugebührzone."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:31]
activated_spoken_type=speech
activated_speech="Achtung Gefährliches Gebiet."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

 

[Luxman]

AW: Support zu iGO Primo

ja. sys.txt:

Spoiler

[debug]
speedcam_enabled=1

[warning]
speedcam_warning=1
is_spoken=1

[speedcam_category:0]
activated_spoken_type=speech
activated_speech="Achtung Blitzer."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:1]
activated_spoken_type=speech
activated_speech="Achtung Mobilblitzer."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:2]
activated_spoken_type=speech
activated_speech="Achtung Blitzer."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:3]
activated_spoken_type=speech
activated_speech="Achtung Durchschnittsgeschwindigkeitskontrolle."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:4]
activated_spoken_type=speech
activated_speech="Achtung Ampelblitzer."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:6]
activated_spoken_type=speech
activated_speech="Achtung Bahnübergang."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:7]
activated_spoken_type=speech
activated_speech="Achtung Bus-Spur-überwachung."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:8]
activated_spoken_type=speech
activated_speech="Achtung Unfallschwerpunkt."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:9]
activated_spoken_type=speech
activated_speech="Achtung Schule."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:10]
activated_spoken_type=speech
activated_speech="Achtung Orts-eingang."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:11]
activated_spoken_type=speech
activated_speech="Achtung Ampelüberwachungs-kamera und Geschwindigkeitskontrolle."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:12]
activated_spoken_type=speech
activated_speech="Achtung Mautstelle."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:13]
activated_spoken_type=speech
activated_speech="Achtung Krankenhaus."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:14]
activated_spoken_type=speech
activated_speech="Achtung Feuerwache."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:15]
activated_spoken_type=speech
activated_speech="Achtung Staugebührzone."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:31]
activated_spoken_type=speech
activated_speech="Achtung Gefährliches Gebiet."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

da bekommt man ja ne schnelle Antwort, Danke.
Und wie funktioniert das mit der Geschwindigkeit für die Blitzer, wie zB. Speed_Limit_050_kph.ogg? da muß ich wohl bestimmt einiges unter warning rausnehmen, oder?

Hier meine zur Zeit sys.txt:

Spoiler

[folders]
has_secondary_root=0
app="Storage Card/Primo"
kmlpoi="userdata\poi" ;"content\userdata\poi"

[interface]
show_exit=1
resolution_dir="480_272"
vga=0
show_detailed_posinfo=1
extra_settings=1

[rawdisplay]
highres=0
screen_x=480
screen_y=272
stretch=1

[loading]
show_statustext=1
show_progressbar=1
progressbar_x=118
progressbar_y=190
progressbar_bmp="loading_progressbar.bmp"
loading_bmp="loading1.bmp"
text_align=1
text_fontsize=10

[shutdown_time]
interface=0

[feature]
signpost_coloring=1
tmc_event_coloring=1
tmc_show_direction_arrows=1
tunnel_guidance=0

[map] 
3d_scale_carmodel=1 ;(1) 
3dcarsizemin=6000 ;(10000) 
3dcarsizemax=18000 ;(28000) 
3dcarsizemul=30000 ;(40000)

[keyboard]
panel_numeric="Numbers"
panel_geo="Geocoord"
panel_alpha="German (QWERTZ)"

[debug]
hnr=1
show_hnr=1
skip_eula=1
smart_2d=1
show_oneway=1
show_oneway_3d=1
show_arrows_on_route=1
earth=1
experimental_features=1
tmc_provider_list_plus=1
tmc_all_stations=1

[other]
demo_enabled=0

[gps]
port="2"
baud="57600"

[tmc]
port="COM,1"
source="gns"
baud=38400
gps_source=1

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=2
automatic_direction_conversion=1

[dynamiccompressor]
compressor=1
a0=56806
thrs=24703
ratio=8
gain=12

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1

[oasis]
exclude_directories="PICTURE::%SDCard%/,PICTURE::%myflashdisk%/"
include_directories="PICTURE::%SDCard%/primo/content/pics/"

[warning]
warn_distances=130:500,120:400,100:400,80:300,70:3 00,60:250,50:200,30:150
speedcam_warning="1"
speedlimit_warning_visual="1"
speedlimit_warning_voice="0"
speedlimit_warning="1"
speedwarn_alt_tolerance="105"
speedwarn_tolerance="110"
speedcam_soundtype_1="1"
speedcam_soundtype_7="0"
speedcam_visualtype_7="1"
speedcam_soundtype_6="0"
speedcam_visualtype_6="1"
speedcam_soundtype_8="0"
speedcam_visualtype_8="1"
speedcam_soundtype_9="0"
speedcam_visualtype_9="1"
speedcam_soundtype_10="0"
speedcam_visualtype_10="1"
speedcam_soundtype_12="0"
speedcam_visualtype_12="1"
speedcam_soundtype_13="0"
speedcam_visualtype_13="1"
speedcam_soundtype_14="0"
speedcam_visualtype_14="1"
speedcam_soundtype_15="0"
speedcam_visualtype_15="1"
speedcam_soundtype_31="0"
speedcam_visualtype_31="1"

[warning.driveralert.settings]
warn_cat0="0"
show_cat0="1"
warn_cat1="0"
show_cat1="1"
warn_cat2="0"
show_cat2="1"
warn_cat3="0"
show_cat3="1"
warn_cat4="0"
show_cat4="1"

Danke

ciao Luxman

 

[180er]

AW: Support zu iGO Primo

z.Z. gibts nur allgemeine warnungen.

soll heissen: blitzer ist blitzer egal ob ein 50er oder 120er

 

[Luxman]

AW: Support zu iGO Primo

OK, Danke und muß ich in meiner sys.txt unter warning was ändern?

ciao Luxman

 

[ricksen666]

AW: Support zu iGO Primo

nein Luxman außer die Meterzahl 70:300